1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright 2008 Freescale Semiconductor, Inc. 4 */ 5 6 #include <common.h> 7 8 #include <fsl_ddr_sdram.h> 9 #include <fsl_ddr_dimm_params.h> 10 fsl_ddr_board_options(memctl_options_t * popts,dimm_params_t * pdimm,unsigned int ctrl_num)11void fsl_ddr_board_options(memctl_options_t *popts, 12 dimm_params_t *pdimm, 13 unsigned int ctrl_num) 14 { 15 /* 16 * Factors to consider for clock adjust: 17 * - number of chips on bus 18 * - position of slot 19 * - DDR1 vs. DDR2? 20 * - ??? 21 * 22 * This needs to be determined on a board-by-board basis. 23 * 0110 3/4 cycle late 24 * 0111 7/8 cycle late 25 */ 26 popts->clk_adjust = 7; 27 28 /* 29 * Factors to consider for CPO: 30 * - frequency 31 * - ddr1 vs. ddr2 32 */ 33 popts->cpo_override = 10; 34 35 /* 36 * Factors to consider for write data delay: 37 * - number of DIMMs 38 * 39 * 1 = 1/4 clock delay 40 * 2 = 1/2 clock delay 41 * 3 = 3/4 clock delay 42 * 4 = 1 clock delay 43 * 5 = 5/4 clock delay 44 * 6 = 3/2 clock delay 45 */ 46 popts->write_data_delay = 3; 47 48 /* 2T timing enable */ 49 popts->twot_en = 1; 50 51 /* 52 * Factors to consider for half-strength driver enable: 53 * - number of DIMMs installed 54 */ 55 popts->half_strength_driver_enable = 0; 56 } 57