• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2015 Stefan Roese <sr@denx.de>
4  */
5 
6 #include <common.h>
7 #include <i2c.h>
8 #include <asm/gpio.h>
9 #include <linux/mbus.h>
10 #include <linux/io.h>
11 #include <asm/arch/cpu.h>
12 #include <asm/arch/soc.h>
13 
14 DECLARE_GLOBAL_DATA_PTR;
15 
16 /*
17  * These values and defines are taken from the Marvell U-Boot version
18  * "u-boot-2013.01-2016_T1.0.eng_drop_v6"
19  */
20 #define DB_DX_AC3_GPP_OUT_ENA_LOW	(~(BIT(0) | BIT(2) | BIT(3) | BIT(4) \
21 					| BIT(6) | BIT(12) | BIT(13) \
22 					| BIT(16) | BIT(17) | BIT(20) \
23 					| BIT(29)  | BIT(30)))
24 #define DB_DX_AC3_GPP_OUT_ENA_MID	(~(0))
25 #define DB_DX_AC3_GPP_OUT_VAL_LOW	(BIT(0) | BIT(2) | BIT(3) | BIT(4) \
26 					| BIT(6) | BIT(12) | BIT(13) \
27 					| BIT(16) | BIT(17) | BIT(20) \
28 					| BIT(29)  | BIT(30))
29 #define DB_DX_AC3_GPP_OUT_VAL_MID	0x0
30 #define DB_DX_AC3_GPP_POL_LOW		0x0
31 #define DB_DX_AC3_GPP_POL_MID		0x0
32 
board_early_init_f(void)33 int board_early_init_f(void)
34 {
35 	/* Configure MPP */
36 	writel(0x00142222, MVEBU_MPP_BASE + 0x00);
37 	writel(0x11122000, MVEBU_MPP_BASE + 0x04);
38 	writel(0x44444004, MVEBU_MPP_BASE + 0x08);
39 	writel(0x14444444, MVEBU_MPP_BASE + 0x0c);
40 	writel(0x00000001, MVEBU_MPP_BASE + 0x10);
41 
42 	/*
43 	 * MVEBU_GPIO0_BASE is the User LED
44 	 * MVEBU_GPIO1_BASE is the Reset Button (currently not used)
45 	 */
46 
47 	/* Set GPP Out value */
48 	writel(DB_DX_AC3_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
49 	/* writel(DB_DX_AC3_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00); */
50 
51 	/* Set GPP Polarity */
52 	writel(DB_DX_AC3_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
53 	/* writel(DB_DX_AC3_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c); */
54 
55 	/* Set GPP Out Enable */
56 	writel(DB_DX_AC3_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
57 	/* writel(DB_DX_AC3_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04); */
58 
59 	return 0;
60 }
61 
board_init(void)62 int board_init(void)
63 {
64 	/* address of boot parameters */
65 	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
66 
67 	return 0;
68 }
69 
checkboard(void)70 int checkboard(void)
71 {
72 	puts("Board: " CONFIG_SYS_BOARD "\n");
73 
74 	return 0;
75 }
76