1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com> 4 */ 5 6 #include <common.h> 7 #include <asm/io.h> 8 #include <asm/addrspace.h> 9 #include <asm/types.h> 10 #include <mach/ar71xx_regs.h> 11 #include <mach/ddr.h> 12 #include <mach/ath79.h> 13 #include <debug_uart.h> 14 15 #ifdef CONFIG_DEBUG_UART_BOARD_INIT board_debug_uart_init(void)16void board_debug_uart_init(void) 17 { 18 void __iomem *regs; 19 u32 val; 20 21 regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE, 22 MAP_NOCACHE); 23 24 /* 25 * GPIO9 as input, GPIO10 as output 26 */ 27 val = readl(regs + AR71XX_GPIO_REG_OE); 28 val |= QCA953X_GPIO(9); 29 val &= ~QCA953X_GPIO(10); 30 writel(val, regs + AR71XX_GPIO_REG_OE); 31 32 /* 33 * Enable GPIO10 as UART0_SOUT 34 */ 35 val = readl(regs + QCA953X_GPIO_REG_OUT_FUNC2); 36 val &= ~QCA953X_GPIO_MUX_MASK(16); 37 val |= QCA953X_GPIO_OUT_MUX_UART0_SOUT << 16; 38 writel(val, regs + QCA953X_GPIO_REG_OUT_FUNC2); 39 40 /* 41 * Enable GPIO9 as UART0_SIN 42 */ 43 val = readl(regs + QCA953X_GPIO_REG_IN_ENABLE0); 44 val &= ~QCA953X_GPIO_MUX_MASK(8); 45 val |= QCA953X_GPIO_IN_MUX_UART0_SIN << 8; 46 writel(val, regs + QCA953X_GPIO_REG_IN_ENABLE0); 47 48 /* 49 * Enable GPIO10 output 50 */ 51 val = readl(regs + AR71XX_GPIO_REG_OUT); 52 val |= QCA953X_GPIO(10); 53 writel(val, regs + AR71XX_GPIO_REG_OUT); 54 } 55 #endif 56 board_early_init_f(void)57int board_early_init_f(void) 58 { 59 ddr_init(); 60 ath79_eth_reset(); 61 return 0; 62 } 63