1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2016 Stefan Roese <sr@denx.de> 4 */ 5 6 #ifndef _CONFIG_DB_88F6720_H 7 #define _CONFIG_DB_88F6720_H 8 9 /* 10 * High Level Configuration Options (easy to change) 11 */ 12 13 /* 14 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 15 * for DDR ECC byte filling in the SPL before loading the main 16 * U-Boot into it. 17 */ 18 #define CONFIG_SYS_TCLK 200000000 /* 200MHz */ 19 20 /* 21 * Commands configuration 22 */ 23 24 /* I2C */ 25 #define CONFIG_SYS_I2C 26 #define CONFIG_SYS_I2C_MVTWSI 27 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 28 #define CONFIG_SYS_I2C_SLAVE 0x0 29 #define CONFIG_SYS_I2C_SPEED 100000 30 31 /* USB/EHCI configuration */ 32 #define CONFIG_EHCI_IS_TDI 33 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 34 35 /* Environment in SPI NOR flash */ 36 37 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 38 39 /* 40 * mv-common.h should be defined after CMD configs since it used them 41 * to enable certain macros 42 */ 43 #include "mv-common.h" 44 45 /* 46 * Memory layout while starting into the bin_hdr via the 47 * BootROM: 48 * 49 * 0x4000.4000 - 0x4003.4000 headers space (192KiB) 50 * 0x4000.4030 bin_hdr start address 51 * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) 52 * 0x4007.fffc BootROM stack top 53 * 54 * The address space between 0x4007.fffc and 0x400f.fff is not locked in 55 * L2 cache thus cannot be used. 56 */ 57 58 /* SPL */ 59 /* Defines for SPL */ 60 #define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030) 61 62 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10)) 63 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 64 65 #ifdef CONFIG_SPL_BUILD 66 #define CONFIG_SYS_MALLOC_SIMPLE 67 #endif 68 69 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 70 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 71 72 /* SPL related SPI defines */ 73 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 74 75 #endif /* _CONFIG_DB_88F6720_H */ 76