1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2015 Freescale Semiconductor, Inc. 4 * 5 * Configuration settings for the SolidRun mx6 based boards 6 */ 7 #ifndef __MX6CUBOXI_CONFIG_H 8 #define __MX6CUBOXI_CONFIG_H 9 10 #include "mx6_common.h" 11 12 #include "imx6_spl.h" 13 14 #define CONFIG_IMX_THERMAL 15 16 #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) 17 #define CONFIG_MXC_UART 18 19 /* MMC Configs */ 20 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 21 22 /* SATA Configuration */ 23 #ifdef CONFIG_CMD_SATA 24 #define CONFIG_SYS_SATA_MAX_DEVICE 1 25 #define CONFIG_DWC_AHSATA_PORT_ID 0 26 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR 27 #define CONFIG_LBA48 28 #endif 29 30 /* Ethernet Configuration */ 31 #define CONFIG_FEC_MXC 32 #define IMX_FEC_BASE ENET_BASE_ADDR 33 #define CONFIG_FEC_XCV_TYPE RGMII 34 #define CONFIG_FEC_MXC_PHYADDR 0 35 #define CONFIG_PHY_ATHEROS 36 37 /* Framebuffer */ 38 #define CONFIG_VIDEO_BMP_RLE8 39 #define CONFIG_SPLASH_SCREEN 40 #define CONFIG_SPLASH_SCREEN_ALIGN 41 #define CONFIG_BMP_16BPP 42 #define CONFIG_VIDEO_LOGO 43 #define CONFIG_VIDEO_BMP_LOGO 44 #define CONFIG_IMX_HDMI 45 #define CONFIG_IMX_VIDEO_SKIP 46 47 /* USB */ 48 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 49 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 50 #define CONFIG_MXC_USB_FLAGS 0 51 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 52 53 /* Command definition */ 54 55 #define CONFIG_MXC_UART_BASE UART1_BASE 56 #define CONSOLE_DEV "ttymxc0" 57 #define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */ 58 59 #ifndef CONFIG_SPL_BUILD 60 #define CONFIG_EXTRA_ENV_SETTINGS \ 61 "som_rev=undefined\0" \ 62 "has_emmc=undefined\0" \ 63 "fdtfile=undefined\0" \ 64 "fdt_addr_r=0x18000000\0" \ 65 "fdt_addr=0x18000000\0" \ 66 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 67 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 68 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ 69 "ramdisk_addr_r=0x13000000\0" \ 70 "ramdiskaddr=0x13000000\0" \ 71 "initrd_high=0xffffffff\0" \ 72 "fdt_high=0xffffffff\0" \ 73 "ip_dyn=yes\0" \ 74 "console=" CONSOLE_DEV ",115200\0" \ 75 "bootm_size=0x10000000\0" \ 76 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ 77 "finduuid=part uuid mmc 0:1 uuid\0" \ 78 "update_sd_firmware=" \ 79 "if test ${ip_dyn} = yes; then " \ 80 "setenv get_cmd dhcp; " \ 81 "else " \ 82 "setenv get_cmd tftp; " \ 83 "fi; " \ 84 "if mmc dev ${mmcdev}; then " \ 85 "if ${get_cmd} ${update_sd_firmware_filename}; then " \ 86 "setexpr fw_sz ${filesize} / 0x200; " \ 87 "setexpr fw_sz ${fw_sz} + 1; " \ 88 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ 89 "fi; " \ 90 "fi\0" \ 91 "findfdt="\ 92 "if test ${board_rev} = MX6Q; then " \ 93 "setenv fdtprefix imx6q; fi; " \ 94 "if test ${board_rev} = MX6DL; then " \ 95 "setenv fdtprefix imx6dl; fi; " \ 96 "if test ${som_rev} = V15; then " \ 97 "setenv fdtsuffix -som-v15; fi; " \ 98 "if test ${has_emmc} = yes; then " \ 99 "setenv emmcsuffix -emmc; fi; " \ 100 "if test ${board_name} = HUMMINGBOARD2 ; then " \ 101 "setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \ 102 "if test ${board_name} = HUMMINGBOARD ; then " \ 103 "setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \ 104 "if test ${board_name} = CUBOXI ; then " \ 105 "setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \ 106 "if test ${fdtfile} = undefined; then " \ 107 "echo WARNING: Could not determine dtb to use; fi; \0" \ 108 BOOTENV 109 110 #define BOOT_TARGET_DEVICES(func) \ 111 func(MMC, mmc, 0) \ 112 func(SATA, sata, 0) \ 113 func(USB, usb, 0) \ 114 func(PXE, pxe, na) \ 115 func(DHCP, dhcp, na) 116 117 #include <config_distro_bootcmd.h> 118 119 #else 120 #define CONFIG_EXTRA_ENV_SETTINGS 121 #endif /* CONFIG_SPL_BUILD */ 122 123 /* Physical Memory Map */ 124 #define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR 125 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 126 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 127 128 #define CONFIG_SYS_INIT_SP_OFFSET \ 129 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 130 #define CONFIG_SYS_INIT_SP_ADDR \ 131 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 132 133 /* Environment organization */ 134 135 #endif /* __MX6CUBOXI_CONFIG_H */ 136