1[ 0.361526] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches 2[ 0.361542] msm_rpm_dev_probe: APSS-RPM communication over SMD 3[ 0.364179] smd_channel_probe_now: allocation table not initialized 4[ 0.365665] smd_channel_probe_now: allocation table not initialized 5[ 0.366843] smd_channel_probe_now: allocation table not initialized 6[ 0.368797] msm_watchdog b017000.qcom,wdt: wdog absent resource not present 7[ 0.369209] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized 8[ 0.370763] msm-sn-fuse a4128.snfuse: SN interface initialized 9[ 0.378294] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0 10[ 0.382014] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 11[ 0.385546] pm8953_s5: 400 <--> 1140 mV at 870 mV normal idle 12[ 0.385948] pm8953_s5_avs_limit: 400 <--> 1140 mV 13[ 0.386159] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us 14[ 0.394160] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0 15[ 0.394806] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0 16[ 0.395181] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0 17[ 0.396003] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0 18[ 0.398805] apc_mem_acc_corner: 0 <--> 0 mV 19[ 0.400216] cpr4_msm8953_apss_read_fuse_data: apc_corner: speed bin = 2 20[ 0.400232] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR fusing revision = 3 21[ 0.400244] cpr4_msm8953_apss_read_fuse_data: apc_corner: foundry id = 2 22[ 0.400256] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 23[ 0.400295] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable 24[ 0.400436] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV 25[ 0.400449] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV 26[ 0.400461] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 795000 uV 27[ 0.400472] cpr4_msm8953_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV 28[ 0.400549] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 482 29[ 0.400563] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 569, quot_offset[ 7]= 85 30[ 0.400576] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 802, quot_offset[ 7]= 230 31[ 0.400589] cpr4_msm8953_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1034, quot_offset[ 7]= 230 32[ 0.400930] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = -15, aging RO scale = 2800 QUOT/V 33[ 0.401137] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop 34[ 0.401316] apc_corner: 0 <--> 0 mV at 0 mV 35[ 0.402835] gfx_mem_acc_corner: 0 <--> 0 mV 36[ 0.403495] GFX_LDO: msm_gfx_ldo_parse_dt: Unable to parse CX parameters rc=-517 37[ 0.403508] GFX_LDO: msm_gfx_ldo_probe: Unable to pasrse dt rc=-517 38[ 0.423309] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 39[ 0.424501] msm_thermal:sensor_mgr_init_threshold threshold id already initialized 40[ 0.424661] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe 41[ 0.424675] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. 42[ 0.424695] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues 43[ 0.424709] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 44[ 0.425079] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 45[ 0.425266] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517 46[ 0.425283] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517 47[ 0.425649] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 48[ 0.425816] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517 49[ 0.425831] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517 50[ 0.426205] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 51[ 0.426370] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517 52[ 0.426386] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517 53[ 0.426754] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0 54[ 0.426866] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-mx regulator!!! 55[ 0.426960] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches 56[ 0.426974] msm_rpm_dev_probe: APSS-RPM communication over SMD 57[ 0.427908] pm8953_s1: 870 <--> 1156 mV at 1000 mV normal idle 58[ 0.428895] pm8953_s2_level: 0 <--> 0 mV at 0 mV normal idle 59[ 0.429549] pm8953_s2_floor_level: 0 <--> 0 mV at 0 mV normal idle 60[ 0.430265] pm8953_s2_level_ao: 0 <--> 0 mV at 0 mV normal idle 61[ 0.431152] pm8953_s3: 1225 mV normal idle 62[ 0.432052] pm8953_s4: 1900 <--> 2050 mV at 1900 mV normal idle 63[ 0.432940] pm8953_s7_level: 0 <--> 0 mV at 0 mV normal idle 64[ 0.433622] pm8953_s7_level_ao: 0 <--> 0 mV at 0 mV normal idle 65[ 0.434268] pm8953_s7_level_so: 0 <--> 0 mV at 0 mV normal idle 66[ 0.435167] pm8953_l1: 1000 mV normal idle 67[ 0.436049] pm8953_l2: 975 <--> 1225 mV at 975 mV normal idle 68[ 0.436960] pm8953_l3: 925 mV normal idle 69[ 0.437844] pm8953_l5: 1800 mV normal idle 70[ 0.438746] pm8953_l6: 1800 mV normal idle 71[ 0.439635] pm8953_l7: 1800 <--> 1900 mV at 1800 mV normal idle 72[ 0.440329] pm8953_l7_ao: 1800 <--> 1900 mV at 1800 mV normal idle 73[ 0.441212] pm8953_l8: 2900 mV normal idle 74[ 0.442114] pm8953_l9: 3000 <--> 3300 mV at 3000 mV normal idle 75[ 0.443000] pm8953_l10: 2850 mV normal idle 76[ 0.443903] pm8953_l11: 2950 mV normal idle 77[ 0.444785] pm8953_l12: 1800 <--> 2950 mV at 1800 mV normal idle 78[ 0.445682] pm8953_l13: 3125 mV normal idle 79[ 0.446551] pm8953_l16: 1800 mV normal idle 80[ 0.447457] pm8953_l17: 2850 mV normal idle 81[ 0.448344] pm8953_l19: 1200 <--> 1350 mV at 1200 mV normal idle 82[ 0.449244] pm8953_l22: 2800 mV normal idle 83[ 0.450161] pm8953_l23: 975 <--> 1225 mV at 975 mV normal idle 84[ 0.451114] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV 85[ 0.451129] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV 86[ 0.451141] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV 87[ 0.451160] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000 88[ 0.451172] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000 89[ 0.451185] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default 90[ 0.451527] msm_gfx_ldo: 0 <--> 0 mV at 0 mV 91[ 0.451939] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 92[ 0.453120] msm_thermal:sensor_mgr_init_threshold threshold id already initialized 93[ 0.453930] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) 94[ 0.453945] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 95[ 0.453961] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19) 96[ 0.453972] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19 97[ 0.453983] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init. 98[ 0.456284] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) 99[ 0.456298] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 100[ 0.456314] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19) 101[ 0.456325] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19 102[ 0.456340] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) 103[ 0.456351] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 104[ 0.456365] cpu cpu4: dev_pm_opp_get_opp_count: device OPP not found (-19) 105[ 0.456376] msm_thermal:get_cpu_freq_plan_len Error reading CPU4 freq table len. error:-19 106[ 0.457044] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 107[ 0.457239] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517 108[ 0.457256] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517 109[ 0.457650] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 110[ 0.457817] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517 111[ 0.457833] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517 112[ 0.458209] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 113[ 0.458375] i2c-msm-v2 7af5000.i2c: error on clk_get(core_clk):-517 114[ 0.458391] i2c-msm-v2 7af5000.i2c: error probe() failed with err:-517 115[ 0.488769] ------------[ cut here ]------------ 116[ 0.488810] WARNING: CPU: 3 PID: 6 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/clk/msm/clock-local2.c:1005 branch_clk_handoff+0x7c/0xc0() 117[ 0.488822] gcc_usb_phy_cfg_ahb_clk clock is enabled in HW even though ENABLE_BIT is not set 118[ 0.488831] Modules linked in: 119[ 0.488853] CPU: 3 PID: 6 Comm: kworker/u16:0 Tainted: G W 3.18.31-perf-g489aada4 #1 120[ 0.488863] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) 121[ 0.488882] Workqueue: deferwq deferred_probe_work_func 122[ 0.488896] Call trace: 123[ 0.488913] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c 124[ 0.488928] [<ffffffc00008a294>] show_stack+0x20/0x28 125[ 0.488944] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 126[ 0.488957] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 127[ 0.488970] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac 128[ 0.488983] [<ffffffc000a816a0>] branch_clk_handoff+0x7c/0xc0 129[ 0.488996] [<ffffffc000a7db70>] __handoff_clk+0xd0/0x2e4 130[ 0.489009] [<ffffffc000a7df08>] msm_clock_register+0x184/0x248 131[ 0.489021] [<ffffffc000a7e05c>] of_msm_clock_register+0x90/0xa0 132[ 0.489036] [<ffffffc000a921a0>] msm_gcc_probe+0x120/0x214 133[ 0.489051] [<ffffffc0005cf840>] platform_drv_probe+0x44/0x90 134[ 0.489064] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c 135[ 0.489077] [<ffffffc0005cda68>] __device_attach+0x34/0x54 136[ 0.489091] [<ffffffc0005cbaa4>] bus_for_each_drv+0x98/0xc8 137[ 0.489103] [<ffffffc0005cd7ac>] device_attach+0x78/0xa4 138[ 0.489116] [<ffffffc0005ccd14>] bus_probe_device+0x38/0xac 139[ 0.489129] [<ffffffc0005cd1a8>] deferred_probe_work_func+0x7c/0xa8 140[ 0.489145] [<ffffffc0000bdd70>] process_one_work+0x264/0x440 141[ 0.489159] [<ffffffc0000be79c>] worker_thread+0x32c/0x448 142[ 0.489173] [<ffffffc0000c314c>] kthread+0xf8/0x100 143[ 0.489183] ---[ end trace 0af8bdd5bcf4f302 ]--- 144[ 0.491893] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks 145[ 0.492190] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 2 PVS Version: 0 146[ 0.495241] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0 147[ 0.495258] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0 148[ 0.495274] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0 149[ 0.495288] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0 150[ 0.495303] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0 151[ 0.495316] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0 152[ 0.495327] ramp_lmh_sid: Use Default LMH SID 153[ 0.495336] ramp_dfs_sid: Use Default DFS SID 154[ 0.495345] ramp_link_sid: Use Default Link SID 155[ 0.495415] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1 156[ 0.495430] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1 157[ 0.495445] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1 158[ 0.495458] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1 159[ 0.495473] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1 160[ 0.495486] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1 161[ 0.495496] ramp_lmh_sid: Use Default LMH SID 162[ 0.495504] ramp_dfs_sid: Use Default DFS SID 163[ 0.495513] ramp_link_sid: Use Default Link SID 164[ 0.495589] clock_rcgwr_init: RCGwR Init Completed 165[ 0.496145] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7) 166[ 0.496158] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1 167[ 0.496169] print_opp_table: clock_cpu: a53 C0: OPP voltage for 2016000000: 7 168[ 0.496179] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1 169[ 0.496189] print_opp_table: clock_cpu: a53 C2: OPP voltage for 2016000000: 7 170[ 0.497429] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 171[ 0.497662] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 172[ 0.497676] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) 173[ 0.499449] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 174[ 0.499735] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 175[ 0.499749] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) 176[ 0.500096] i2c-msm-v2 78b7000.i2c: irq:176 when no active transfer 177[ 0.502108] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 178[ 0.502419] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 179[ 0.502433] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) 180[ 0.505020] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks. 181[ 0.572717] qcom,qpnp-pin qpnp-pin-17: qpnp_pin_probe: no device nodes specified in topology 182[ 0.572749] qcom,qpnp-pin: probe of qpnp-pin-17 failed with error -22 183[ 0.573336] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping 184[ 0.573359] msm_cpuss_dump soc:cpuss_dump: Couldn't get memory for dumping 185[ 0.576961] KPI: Bootloader start count = 27248 186[ 0.576973] KPI: Bootloader end count = 113766 187[ 0.576982] KPI: Bootloader display count = 77262 188[ 0.576991] KPI: Bootloader load kernel count = 2830 189[ 0.577000] KPI: Kernel MPM timestamp = 141971 190[ 0.577009] KPI: Kernel MPM Clock frequency = 32768 191[ 0.577036] socinfo_print: v0.10, id=293, ver=1.1, raw_id=70, raw_ver=1, hw_plat=11, hw_plat_ver=65536 192[ 0.577036] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=3 serial_number=2990009489 193[ 0.578111] eldo2_8953: no parameters 194[ 0.578430] qpnp_pin_of_gpio_xlate: no such PMIC gpio 5 in device topology 195[ 0.578569] adv_vreg: no parameters 196[ 0.579029] vdd_vreg: no parameters 197[ 0.579572] vgaarb: loaded 198[ 0.580691] SCSI subsystem initialized 199[ 0.581621] usbcore: registered new interface driver usbfs 200[ 0.581703] usbcore: registered new interface driver hub 201[ 0.581938] usbcore: registered new device driver usb 202[ 0.582675] media: Linux media interface: v0.10 203[ 0.582745] Linux video capture interface: v2.00 204[ 0.582876] EDAC MC: Ver: 3.0.0 205[ 0.620283] cpufreq: driver msm up and running 206[ 0.620691] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0 207[ 0.620877] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0 208[ 0.621076] ION heap system created 209[ 0.621169] ION heap mm created at 0x00000000f6800000 with size 9800000 210[ 0.621182] ION heap qsecom created at 0x00000000f5800000 with size 1000000 211[ 0.621460] msm_bus_fabric_init_driver 212[ 0.622314] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048 213[ 0.632032] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot 214[ 0.632052] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) 215[ 0.632207] input: qpnp_pon as /devices/virtual/input/input0 216[ 0.632782] pon_spare_reg: no parameters 217[ 0.632864] qcom,qpnp-power-on qpnp-power-on-14: No PON config. specified 218[ 0.632913] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot 219[ 0.632929] qcom,qpnp-power-on qpnp-power-on-14: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) 220[ 0.633106] PMIC@SID0: (null) v1.0 options: 2, 2, 0, 0 221[ 0.633202] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0 222[ 0.633794] ipa ipa2_uc_state_check:296 uC interface not initialized 223[ 0.633801] ipa ipa_sps_irq_control_all:938 EP (2) not allocated. 224[ 0.633807] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. 225[ 0.635167] sps:BAM 0x0000000007904000 is registered. 226[ 0.635605] sps:BAM 0x0000000007904000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20 227[ 0.638502] IPA driver initialization was successful. 228[ 0.639413] gdsc_venus: no parameters 229[ 0.639677] gdsc_mdss: no parameters 230[ 0.639949] gdsc_jpeg: no parameters 231[ 0.640391] gdsc_vfe: no parameters 232[ 0.640829] gdsc_vfe1: no parameters 233[ 0.641080] gdsc_cpp: no parameters 234[ 0.641295] gdsc_oxili_gx: no parameters 235[ 0.641373] gdsc_oxili_gx: supplied by msm_gfx_ldo 236[ 0.641594] gdsc_venus_core0: fast normal 237[ 0.641806] gdsc_oxili_cx: no parameters 238[ 0.641978] gdsc_usb30: no parameters 239[ 0.642910] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL 240[ 0.643595] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully 241[ 0.643621] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL 242[ 0.644743] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock 243[ 0.645207] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully 244[ 0.645638] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffffff8001d80000, with 21 ctx banks 245[ 0.651488] msm_iommu_ctx 1e20000.qcom,iommu-ctx: context adsp_elf using bank 0 246[ 0.651637] msm_iommu_ctx 1e21000.qcom,iommu-ctx: context adsp_sec_pixel using bank 1 247[ 0.651776] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context mdp_1 using bank 2 248[ 0.651917] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context venus_fw using bank 3 249[ 0.652064] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4 250[ 0.652210] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_sec_bitstream using bank 5 251[ 0.652351] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context venus_sec_pixel using bank 6 252[ 0.652518] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context pronto_pil using bank 8 253[ 0.652683] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context q6 using bank 9 254[ 0.652854] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context periph_rpm using bank 10 255[ 0.653020] msm_iommu_ctx 1e2b000.qcom,iommu-ctx: context lpass using bank 11 256[ 0.653190] msm_iommu_ctx 1e2f000.qcom,iommu-ctx: context adsp_io using bank 15 257[ 0.653355] msm_iommu_ctx 1e30000.qcom,iommu-ctx: context adsp_opendsp using bank 16 258[ 0.653524] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context adsp_shared using bank 17 259[ 0.653691] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context cpp using bank 18 260[ 0.653862] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context jpeg_enc0 using bank 19 261[ 0.654029] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context vfe using bank 20 262[ 0.654197] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context mdp_0 using bank 21 263[ 0.654366] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_ns using bank 22 264[ 0.654535] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context ipa using bank 24 265[ 0.654704] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context access_control using bank 23 266[ 0.656726] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000 267[ 0.656753] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000 268[ 0.656773] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000 269[ 0.658751] Advanced Linux Sound Architecture Driver Initialized. 270[ 0.659538] Bluetooth: ffffffc04eec7cf8 271[ 0.659562] NET: Registered protocol family 31 272[ 0.659568] Bluetooth: ffffffc04eec7cf8 273[ 0.659577] Bluetooth: ffffffc04eec7cd8Bluetooth: ffffffc04eec7ca8 274[ 0.659608] Bluetooth: ffffffc04eec7cb8<6>[ 0.659934] cfg80211: Calling CRDA to update world regulatory domain 275[ 0.659952] cfg80211: World regulatory domain updated: 276[ 0.659957] cfg80211: DFS Master region: unset 277[ 0.659961] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) 278[ 0.659969] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 279[ 0.659975] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 280[ 0.659981] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) 281[ 0.659986] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 282[ 0.659992] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 283[ 0.659997] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 284[ 0.660003] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 285[ 0.660008] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) 286[ 0.660131] pcie:pcie_init. 287[ 0.661591] ibb_reg: 4600 <--> 6000 mV at 5500 mV 288[ 0.661857] lab_reg: 4600 <--> 6000 mV at 5500 mV 289[ 0.662483] Switched to clocksource arch_sys_counter 290[ 0.698566] bcl_peripheral:bcl_perph_init BCL Initialized 291[ 0.700353] NET: Registered protocol family 2 292[ 0.700745] TCP established hash table entries: 32768 (order: 6, 262144 bytes) 293[ 0.700904] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) 294[ 0.701219] TCP: Hash tables configured (established 32768 bind 32768) 295[ 0.701261] TCP: reno registered 296[ 0.701269] UDP hash table entries: 2048 (order: 4, 65536 bytes) 297[ 0.701319] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) 298[ 0.701488] NET: Registered protocol family 1 299[ 0.701515] PCI: CLS 0 bytes, default 128 300[ 0.703741] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks. 301[ 0.704189] Trying to unpack rootfs image as initramfs... 302[ 0.763323] Freeing initrd memory: 2172K (ffffffc003600000 - ffffffc00381f000) 303[ 0.767307] futex hash table entries: 2048 (order: 6, 262144 bytes) 304[ 0.767392] Initialise system trusted keyring 305[ 0.767438] audit: initializing netlink subsys (disabled) 306[ 0.767482] audit: type=2000 audit(0.759:1): initialized 307[ 0.767840] vmscan: error setting kswapd cpu affinity mask 308[ 0.771428] zbud: loaded 309[ 0.771763] VFS: Disk quotas dquot_6.5.2 310[ 0.771855] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 311[ 0.772936] exFAT: Version 1.2.9 312[ 0.773764] fuse init (API version 7.23) 313[ 0.773979] SELinux: Registering netfilter hooks 314[ 0.775855] Key type asymmetric registered 315[ 0.775863] Asymmetric key parser 'x509' registered 316[ 0.775962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) 317[ 0.775972] io scheduler noop registered 318[ 0.775979] io scheduler deadline registered 319[ 0.776116] io scheduler cfq registered (default) 320[ 0.780238] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x2 (ok) 321[ 0.780359] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x0d1300c8 OPER:0x00000010 322[ 0.780391] msm_dba_helper_i2c_read: i2c read failed 323[ 0.780398] adv7533_read: read err: addr 0x39, reg 0x0, size 0x1 324[ 0.780402] adv7533_probe: Failed to read chip rev 325[ 0.780456] adv7533: probe of 2-0039 failed with error -5 326[ 0.780768] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found 327[ 0.780777] mdss_mdp_probe+0x228/0x10dc->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed 328[ 0.781193] mdss_mdp_irq_clk_register: unable to get clk: lut_clk 329[ 0.781754] No change in context(0==0), skip 330[ 0.782433] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0 331[ 0.782451] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1 332[ 0.782457] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2 333[ 0.782470] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3 334[ 0.782484] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0 335[ 0.782494] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read 336[ 0.782579] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read 337[ 0.782841] xlog_status: enable:1, panic:1, dump:2 338[ 0.783478] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100 339[ 0.785170] mdss_smmu_util_parse_dt_clock: clocks are not defined 340[ 0.785216] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! 341[ 0.785239] mdss_smmu_util_parse_dt_clock: clocks are not defined 342[ 0.785271] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! 343[ 0.787121] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 344[ 0.787613] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_nt35596_tianma_fhd_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_nt35596_tianma_fhd_video 345[ 0.787619] liujia print panel name = 0 346[ 0.787673] mdss_dsi_panel_init: Panel Name = nt35596 tianma fhd video mode dsi panel 347[ 0.787810] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_nt35596_tianma_fhd_video" (ffffffc04eec7268) 348[ 0.787827] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command 349[ 0.787836] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command 350[ 0.787841] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node: 351[ 0.788120] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cold_gamma_fb-command 352[ 0.788129] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-warm_gamma_fb-command 353[ 0.788137] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-CE_on_fb-command 354[ 0.788145] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-CABC_on_fb-command 355[ 0.788154] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-cold_slpout-command 356[ 0.788163] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-warm_slpout-command 357[ 0.788171] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-default_slpout-command 358[ 0.788195] mdss_dsi_parse_panel_features: ulps feature disabled 359[ 0.788202] mdss_dsi_parse_panel_features: ulps during suspend feature disabled 360[ 0.788209] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 361[ 0.788364] 1a94000.qcom,mdss_dsi_ctrl0 supply vdd not found, using dummy regulator 362[ 0.788601] mdss_dsi_parse_ctrl_params:3921 Unable to read qcom,display-id, data=0000000000000000,len=20 363[ 0.788614] mdss_dsi_parse_gpio_params: bklt_en gpio not specified 364[ 0.788667] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found 365[ 0.788676] mdss_dsi_retrieve_ctrl_resources+0x178/0x1fc->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed 366[ 0.788683] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff80017ee000 ctrl_size=400 phy_base=ffffff80017f4400 phy_size=580 367[ 0.788699] init_te_irq:liujia irq = 31 368[ 0.788828] dsi_panel_device_register: Continuous splash enabled 369[ 0.789106] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0 370[ 0.790418] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2 371[ 0.790564] mdss_dsi_status_init: DSI status check interval:2000 372[ 0.791460] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel 373[ 0.791992] mdss_fb_probe: fb0: split_mode:0 left:0 right:0 374[ 0.792624] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully! 375[ 0.792936] mdss_fb_probe: fb1: split_mode:0 left:0 right:0 376[ 0.793022] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully! 377[ 0.793095] mdss_mdp_splash_parse_dt: splash mem child node is not present 378[ 0.794037] spcom [spcom_init]: spcom driver Ver 1.0 23-Nov-2015. 379[ 0.795834] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR 380[ 0.795860] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR 381[ 0.799475] In memshare_probe, Memshare probe success 382[ 0.801337] msm_rpm_log_probe: OK 383[ 0.802466] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped. 384[ 0.804251] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped. 385[ 0.807182] msm_serial_hs module loaded 386[ 0.816536] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0 387[ 0.822285] brd: module loaded 388[ 0.823974] loop: module loaded 389[ 0.824248] zram: Created 1 device(s) ... 390[ 0.824652] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000 391[ 0.824678] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE 392[ 0.824686] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem 393[ 0.824693] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0 394[ 0.825232] scm_call failed: func id 0x70000006, ret: -1, syscall returns: 0x0, 0x0, 0x0 395[ 0.825238] QSEECOM: qseecom_probe: qseecom.whitelist_support = 0 396[ 0.826560] i2c-core: driver [tabla-i2c-core] using legacy suspend method 397[ 0.826566] i2c-core: driver [tabla-i2c-core] using legacy resume method 398[ 0.826639] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method 399[ 0.826644] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method 400[ 0.826720] i2c-core: driver [tasha-i2c-core] using legacy suspend method 401[ 0.826724] i2c-core: driver [tasha-i2c-core] using legacy resume method 402[ 0.827234] nq-nci 5-0028: ese GPIO <OPTIONAL> error getting from OF node 403[ 0.827308] nq-nci 5-0028: nqx_probe: ese gpio not provided 404[ 0.880233] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xd (ok) 405[ 0.880363] i2c-msm-v2 7af5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090 406[ 0.880401] nq-nci 5-0028: nfcc_hw_check: - i2c_master_send Error 407[ 0.880407] nq-nci 5-0028: nfcc_hw_check: - NFCC HW not available 408[ 0.880479] ------------[ cut here ]------------ 409[ 0.880489] WARNING: CPU: 5 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/gpio/gpiolib.c:68 gpio_to_desc+0x3c/0x60() 410[ 0.880493] invalid GPIO -22 411[ 0.880497] Modules linked in: 412[ 0.880508] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 413[ 0.880513] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) 414[ 0.880518] Call trace: 415[ 0.880526] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c 416[ 0.880532] [<ffffffc00008a294>] show_stack+0x20/0x28 417[ 0.880540] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 418[ 0.880547] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 419[ 0.880552] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac 420[ 0.880557] [<ffffffc0003ce138>] gpio_to_desc+0x3c/0x60 421[ 0.880564] [<ffffffc0003d05a4>] gpio_free+0x20/0x30 422[ 0.880571] [<ffffffc000624d5c>] nqx_probe+0x7c8/0x874 423[ 0.880579] [<ffffffc0007cea88>] i2c_device_probe+0xc4/0xf8 424[ 0.880586] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c 425[ 0.880592] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 426[ 0.880598] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc 427[ 0.880604] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 428[ 0.880609] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 429[ 0.880615] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 430[ 0.880621] [<ffffffc0007cdee4>] i2c_register_driver+0x58/0xb8 431[ 0.880627] [<ffffffc00150a3a8>] nqx_dev_init+0x18/0x20 432[ 0.880633] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 433[ 0.880640] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 434[ 0.880647] [<ffffffc000db797c>] kernel_init+0x20/0xe0 435[ 0.880652] ---[ end trace 0af8bdd5bcf4f303 ]--- 436[ 0.880664] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware 437[ 0.880955] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 438[ 0.881482] qce 720000.qcedev: Qualcomm Crypto 5.3.3 device found @0x720000 439[ 0.881491] qce 720000.qcedev: CE device = 0x0 440[ 0.881491] , IO base, CE = 0xffffff8001fc0000 441[ 0.881491] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 442[ 0.881491] IO base BAM = 0x (null) 443[ 0.881491] BAM IRQ 193 444[ 0.881491] Engines Availability = 0x2010853 445[ 0.881688] sps:BAM 0x0000000000704000 is registered. 446[ 0.881854] sps:BAM 0x0000000000704000 (va:0xffffff80020c0000) enabled: ver:0x27, number of pipes:8 447[ 0.882060] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193 448[ 0.884933] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 449[ 0.885706] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.3 device found @0x720000 450[ 0.885715] qcrypto 720000.qcrypto: CE device = 0x0 451[ 0.885715] , IO base, CE = 0xffffff8002100000 452[ 0.885715] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 453[ 0.885715] IO base BAM = 0x (null) 454[ 0.885715] BAM IRQ 193 455[ 0.885715] Engines Availability = 0x2010853 456[ 0.885976] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 193 457[ 0.888234] qcrypto 720000.qcrypto: qcrypto-ecb-aes 458[ 0.888318] qcrypto 720000.qcrypto: qcrypto-cbc-aes 459[ 0.888396] qcrypto 720000.qcrypto: qcrypto-ctr-aes 460[ 0.888473] qcrypto 720000.qcrypto: qcrypto-ecb-des 461[ 0.888551] qcrypto 720000.qcrypto: qcrypto-cbc-des 462[ 0.888629] qcrypto 720000.qcrypto: qcrypto-ecb-3des 463[ 0.888706] qcrypto 720000.qcrypto: qcrypto-cbc-3des 464[ 0.888785] qcrypto 720000.qcrypto: qcrypto-xts-aes 465[ 0.888863] qcrypto 720000.qcrypto: qcrypto-sha1 466[ 0.888940] qcrypto 720000.qcrypto: qcrypto-sha256 467[ 0.889019] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes 468[ 0.889098] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des 469[ 0.889176] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des 470[ 0.889260] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes 471[ 0.889340] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des 472[ 0.889419] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des 473[ 0.889496] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 474[ 0.889579] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 475[ 0.889658] qcrypto 720000.qcrypto: qcrypto-aes-ccm 476[ 0.889735] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm 477[ 0.890703] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed 478[ 0.890824] ICE IRQ = 194 479[ 0.891697] SCSI Media Changer driver v0.25 480[ 0.892998] tun: Universal TUN/TAP device driver, 1.6 481[ 0.893003] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 482[ 0.893067] PPP generic driver version 2.4.2 483[ 0.893145] PPP BSD Compression module registered 484[ 0.893154] PPP Deflate Compression module registered 485[ 0.893171] PPP MPPE Compression module registered 486[ 0.893183] NET: Registered protocol family 24 487[ 0.893746] wcnss_wlan probed in built-in mode 488[ 0.894365] usbcore: registered new interface driver asix 489[ 0.894441] usbcore: registered new interface driver ax88179_178a 490[ 0.894475] usbcore: registered new interface driver cdc_ether 491[ 0.894510] usbcore: registered new interface driver net1080 492[ 0.894544] usbcore: registered new interface driver cdc_subset 493[ 0.894578] usbcore: registered new interface driver zaurus 494[ 0.894720] usbcore: registered new interface driver cdc_ncm 495[ 0.895132] msm_sharedmem: sharedmem_register_qmi: qmi init successful 496[ 0.895621] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 497[ 0.895628] hyp_assign_table: Failed to assign memory protection, ret = -5 498[ 0.895636] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f4900000 size=1572864 err=-5 499[ 0.895730] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' 500[ 0.901028] msm-dwc3 7000000.ssusb: unable to get dbm device 501[ 0.902366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 502[ 0.902646] ehci-pci: EHCI PCI platform driver 503[ 0.902685] ehci-msm: Qualcomm On-Chip EHCI Host Controller 504[ 0.903006] usbcore: registered new interface driver cdc_acm 505[ 0.903011] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 506[ 0.903057] usbcore: registered new interface driver usb-storage 507[ 0.903088] usbcore: registered new interface driver ums-alauda 508[ 0.903118] usbcore: registered new interface driver ums-cypress 509[ 0.903149] usbcore: registered new interface driver ums-datafab 510[ 0.903179] usbcore: registered new interface driver ums-freecom 511[ 0.903209] usbcore: registered new interface driver ums-isd200 512[ 0.903242] usbcore: registered new interface driver ums-jumpshot 513[ 0.903273] usbcore: registered new interface driver ums-karma 514[ 0.903305] usbcore: registered new interface driver ums-sddr09 515[ 0.903337] usbcore: registered new interface driver ums-sddr55 516[ 0.903368] usbcore: registered new interface driver ums-usbat 517[ 0.903446] usbcore: registered new interface driver usbserial 518[ 0.903482] usbcore: registered new interface driver usb_ehset_test 519[ 0.903983] gbridge_init: gbridge_init successs. 520[ 0.904234] mousedev: PS/2 mouse device common for all mice 521[ 0.904391] usbcore: registered new interface driver xpad 522[ 0.904400] tony_test:[ft5435_ts_init] 523[ 0.904815] ~~~~~ ft5435_ts_probe start 524[ 0.904820] [ft5435_ts_probe]CONFIG_FB is defined 525[ 0.904824] [ft5435_ts_probe]CONFIG_PM is defined 526[ 0.904863] [ft5435_get_dt_vkey]000 527[ 0.904867] [ft5435_get_dt_vkey]111 528[ 0.904871] [ft5435_get_dt_vkey]222 529[ 0.904875] [ft5435_get_dt_vkey]333 530[ 0.904881] [FTS]keycode = 172, x= 500, y=2040 531[ 0.904887] [FTS]keycode = 139, x= 200, y=2040 532[ 0.904893] [FTS]keycode = 158, x= 800, y=2040 533[ 0.904897] [ft5435_get_dt_vkey]5555 534[ 0.905030] input: ft5435_ts as /devices/soc/78b7000.i2c/i2c-3/3-0038/input/input1 535[ 1.150267] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x10 (ok) 536[ 1.150465] ft5435_ts 3-0038: Device ID = 0x54 537[ 1.150728] ------------[ cut here ]------------ 538[ 1.150740] WARNING: CPU: 0 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/base/core.c:551 device_create_file+0xa4/0xb4() 539[ 1.150745] Attribute set_cover_mode: read permission without 'show' 540[ 1.150750] Modules linked in: 541[ 1.150760] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 542[ 1.150765] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) 543[ 1.150770] Call trace: 544[ 1.150778] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c 545[ 1.150784] [<ffffffc00008a294>] show_stack+0x20/0x28 546[ 1.150792] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 547[ 1.150799] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 548[ 1.150804] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac 549[ 1.150810] [<ffffffc0005c8a88>] device_create_file+0xa4/0xb4 550[ 1.150817] [<ffffffc000791f1c>] ft5435_ts_probe+0xd80/0x14ac 551[ 1.150825] [<ffffffc0007cea88>] i2c_device_probe+0xc4/0xf8 552[ 1.150832] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c 553[ 1.150838] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 554[ 1.150843] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc 555[ 1.150849] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 556[ 1.150854] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 557[ 1.150860] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 558[ 1.150866] [<ffffffc0007cdee4>] i2c_register_driver+0x58/0xb8 559[ 1.150872] [<ffffffc00150eb60>] ft5435_ts_init+0xb8/0xc4 560[ 1.150878] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 561[ 1.150885] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 562[ 1.150892] [<ffffffc000db797c>] kernel_init+0x20/0xe0 563[ 1.150897] ---[ end trace 0af8bdd5bcf4f304 ]--- 564[ 1.151104] ft5435_ts 3-0038: report rate = 110Hz 565[ 1.151679] ft5435_ts 3-0038: Firmware version = 10.0.0 566[ 1.151827] [Fu]fw_vendor_id=0x3b 567[ 1.151831] upgrade,fts_fw_vendor_id=0x3b 568[ 1.151837] ft5435_fw_upgrade_by_array_data, suspended=0 569[ 1.151843] ft5435_ts 3-0038: Current firmware: 0x0a.0.0 570[ 1.151849] ft5435_ts 3-0038: New firmware: 0x0a.0.0 571[ 1.151855] ft5435_ts 3-0038: Exiting fw upgrade... 572[ 1.151860] ft5435_fw_upgrade_by_array_data done 573[ 1.151869] [fts]ft5435_fw_LockDownInfo_get_from_boot, fw_vendor_id=0x3b 574[ 1.570274] ft5435_fw_LockDownInfo_get_from_boot,FTS_UPGRADE_LOOP ok is i = 0 575[ 1.610293] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31,j=0 576[ 1.610299] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x36,j=1 577[ 1.610303] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x32,j=2 578[ 1.610308] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01,j=3 579[ 1.610312] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0xc6,j=4 580[ 1.610317] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01,j=5 581[ 1.610322] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x31,j=6 582[ 1.610326] ft5435_fw_LockDownInfo_get_from_boot: REG VAL = 0x01,j=7 583[ 1.610331] ft5435_fw_LockDownInfo_get_from_boot: reset the tp 584[ 1.920040] tpd_probe, ft5x46_ctpm_LockDownInfo_get_from_boot, tp_lockdown_info=31363201c6013101 585[ 1.920064] ft5435_ts 3-0038: Create proc entry success! 586[ 1.920179] ~~~~~ ft5435_ts_probe end 587[ 1.920219] [ TSP ] ist30xx_init() 588[ 1.920484] [ TSP ] ### IMAGIS probe(ver:3.0.0.0, addr:0x50) ### 589[ 1.920498] [ TSP ] ##### Device tree ##### 590[ 1.920502] [ TSP ] reset gpio: 64 591[ 1.920507] [ TSP ] irq gpio: 65 592[ 1.920511] [ TSP ] ist30xx_request_gpio 593[ 1.920517] [ TSP ] unable to request reset gpio: 64 594[ 1.920523] [ TSP ] Error, ist30xx init driver 595[ 1.920554] <<-GTP-INFO->> GTP driver installing... 596[ 1.920998] <<-GTP-INFO->> GTP Driver Version: V2.4<2014/11/28> 597[ 1.921003] <<-GTP-INFO->> GTP I2C Address: 0x14 598[ 1.921156] <<-GTP-ERROR->> Failed to request GPIO:65, ERRNO:-16 599[ 1.921164] <<-GTP-INFO->> gtp_request_io_port : ret = -19 600[ 1.921164] 601[ 1.921170] <<-GTP-ERROR->> GTP request IO port failed. 602[ 1.921174] <<-GTP-INFO->> destroy_workqueue : goodix_wq 603[ 1.921237] <<-GTP-INFO->> destroy_workqueue : gtp_esd_check_workqueue 604[ 1.921316] <<-GTP-INFO->> wmy i2c_add_driver, ret = 0 605[ 1.921325] gf:gf_init, entry 606[ 1.921329] --------gf_init start.-------- 607[ 1.921798] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio135" for function "blsp_spi6" 608[ 1.921807] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio136" for function "blsp_spi6" 609[ 1.921816] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio137" for function "blsp_spi6" 610[ 1.921825] msm8953-pinctrl 1000000.pinctrl: invalid group "gpio138" for function "blsp_spi6" 611[ 1.921920] gf:gf_probe, entry 612[ 1.921925] --------gf_probe start.-------- 613[ 1.922086] input: gf3208 as /devices/virtual/input/input2 614[ 1.922142] --------gf_probe end---OK.-------- 615[ 1.922284] status = 0x0 616[ 1.922288] gf:gf_init, exit 617[ 1.922292] --------gf_init end---OK.-------- 618[ 1.922889] fpc1020 soc:fpc1020: fpc1020_probe: ok 619[ 1.922990] fpc1020_init OK 620[ 1.923698] input: hbtp_vm as /devices/virtual/input/input3 621[ 1.924416] qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0 622[ 1.924572] i2c /dev entries driver 623[ 1.925160] lirc_dev: IR Remote Control driver registered, major 233 624[ 1.925168] IR NEC protocol handler initialized 625[ 1.925177] IR RC5(x/sz) protocol handler initialized 626[ 1.925185] IR RC6 protocol handler initialized 627[ 1.925192] IR JVC protocol handler initialized 628[ 1.925200] IR Sony protocol handler initialized 629[ 1.925208] IR SANYO protocol handler initialized 630[ 1.925215] IR Sharp protocol handler initialized 631[ 1.925224] IR LIRC bridge handler initialized 632[ 1.925232] IR XMP protocol handler initialized 633[ 1.929996] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000 634[ 1.930426] /soc/qcom,cam_smmu/msm_cam_smmu_cb3: could not get #iommu-cells for /soc/qcom,iommu@1e00000 635[ 1.930679] /soc/qcom,cam_smmu/msm_cam_smmu_cb4: could not get #iommu-cells for /soc/qcom,iommu@1e00000 636[ 1.932994] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts 637[ 1.939966] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts 638[ 1.940999] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts 639[ 1.941992] msm_camera_get_dt_vreg_data:1115 number of entries is 0 or not present in dts 640[ 1.942548] msm_camera_pinctrl_init:1277 Getting pinctrl handle failed 641[ 1.942555] msm_actuator_platform_probe:1934 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl 642[ 1.942627] qcom,actuator: probe of 1b0c000.qcom,cci:qcom,actuator@0 failed with error -22 643[ 1.943325] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 644[ 1.948839] msm_camera_config_single_vreg : can't find sub reg name 645[ 1.957788] msm_cci_init:1382: hw_version = 0x10020005 646[ 1.957813] read_eeprom_memory 157 647[ 1.958251] msm_cci_irq:1712 MASTER_0 error 0x10000000 648[ 1.958279] msm_cci_i2c_read:906 read_words = 0, exp words = 1 649[ 1.958285] msm_cci_i2c_read_bytes:989 failed rc -22 650[ 1.958290] read_eeprom_memory 173 error 651[ 1.958295] msm_eeprom_platform_probe read_eeprom_memory failed 652[ 1.966524] msm_camera_config_single_vreg : can't find sub reg name 653[ 1.970734] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@0 failed with error -22 654[ 1.971171] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 655[ 1.977603] msm_camera_config_single_vreg : can't find sub reg name 656[ 1.986648] msm_cci_init:1382: hw_version = 0x10020005 657[ 1.986672] read_eeprom_memory 157 658[ 1.987258] qcom,slave-addr = 0xB0 659[ 1.987751] qcom,slave-addr = 0xB0 660[ 1.988244] qcom,slave-addr = 0xB0 661[ 1.988917] qcom,slave-addr = 0xB0 662[ 1.989771] qcom,slave-addr = 0xB0 663[ 1.990266] qcom,slave-addr = 0xB0 664[ 1.991209] qcom,slave-addr = 0xB0 665[ 1.992152] qcom,slave-addr = 0xB0 666[ 2.210241] qcom,slave-addr = 0xB0 667[ 2.329799] msm_camera_config_single_vreg : can't find sub reg name 668[ 2.334483] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 669[ 2.340871] msm_camera_config_single_vreg : can't find sub reg name 670[ 2.349914] msm_cci_init:1382: hw_version = 0x10020005 671[ 2.349938] read_eeprom_memory 157 672[ 2.350527] qcom,slave-addr = 0xB0 673[ 2.351110] qcom,slave-addr = 0xB0 674[ 2.351783] qcom,slave-addr = 0xB0 675[ 2.352636] qcom,slave-addr = 0xB0 676[ 2.353670] qcom,slave-addr = 0xB0 677[ 2.571765] qcom,slave-addr = 0xB0 678[ 2.682519] qcom,slave-addr = 0xB0 679[ 2.691420] msm_camera_config_single_vreg : can't find sub reg name 680[ 2.696150] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 681[ 2.717164] msm_cci_init:1382: hw_version = 0x10020005 682[ 2.717186] read_eeprom_memory 157 683[ 2.717623] msm_cci_irq:1718 MASTER_1 error 0x40000000 684[ 2.717651] msm_cci_i2c_read:906 read_words = 0, exp words = 1 685[ 2.717656] msm_cci_i2c_read_bytes:989 failed rc -22 686[ 2.717661] read_eeprom_memory 173 error 687[ 2.717666] msm_eeprom_platform_probe read_eeprom_memory failed 688[ 2.737052] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@3 failed with error -22 689[ 2.737497] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 690[ 2.759146] msm_cci_init:1382: hw_version = 0x10020005 691[ 2.759169] read_eeprom_memory 157 692[ 2.759605] msm_cci_irq:1718 MASTER_1 error 0x40000000 693[ 2.759634] msm_cci_i2c_read:906 read_words = 0, exp words = 1 694[ 2.759639] msm_cci_i2c_read_bytes:989 failed rc -22 695[ 2.759644] read_eeprom_memory 173 error 696[ 2.759649] msm_eeprom_platform_probe read_eeprom_memory failed 697[ 2.779026] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@4 failed with error -22 698[ 2.779471] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 699[ 2.801117] msm_cci_init:1382: hw_version = 0x10020005 700[ 2.801140] read_eeprom_memory 157 701[ 2.980887] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 702[ 2.987291] msm_camera_config_single_vreg : can't find sub reg name 703[ 2.996332] msm_cci_init:1382: hw_version = 0x10020005 704[ 2.996355] read_eeprom_memory 157 705[ 2.996941] qcom,slave-addr = 0xB0 706[ 3.123326] qcom,slave-addr = 0xB0 707[ 3.249702] qcom,slave-addr = 0xB0 708[ 3.376070] qcom,slave-addr = 0xB0 709[ 3.502441] qcom,slave-addr = 0xB0 710[ 3.628817] qcom,slave-addr = 0xB0 711[ 3.755194] qcom,slave-addr = 0xB0 712[ 3.881565] qcom,slave-addr = 0xB0 713[ 4.016175] msm_camera_config_single_vreg : can't find sub reg name 714[ 4.020876] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 715[ 4.027283] msm_camera_config_single_vreg : can't find sub reg name 716[ 4.036321] msm_cci_init:1382: hw_version = 0x10020005 717[ 4.036345] read_eeprom_memory 157 718[ 4.036781] msm_cci_irq:1712 MASTER_0 error 0x10000000 719[ 4.036807] msm_cci_i2c_read:906 read_words = 0, exp words = 1 720[ 4.036813] msm_cci_i2c_read_bytes:989 failed rc -22 721[ 4.036818] read_eeprom_memory 173 error 722[ 4.036823] msm_eeprom_platform_probe read_eeprom_memory failed 723[ 4.044190] msm_camera_config_single_vreg : can't find sub reg name 724[ 4.048403] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@7 failed with error -22 725[ 4.048811] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 726[ 4.055205] msm_camera_config_single_vreg : can't find sub reg name 727[ 4.064246] msm_cci_init:1382: hw_version = 0x10020005 728[ 4.064269] read_eeprom_memory 157 729[ 4.064856] qcom,slave-addr = 0xB0 730[ 4.191243] qcom,slave-addr = 0xB0 731[ 4.317610] qcom,slave-addr = 0xB0 732[ 4.443980] qcom,slave-addr = 0xB0 733[ 4.570352] qcom,slave-addr = 0xB0 734[ 4.696730] qcom,slave-addr = 0xB0 735[ 4.823108] qcom,slave-addr = 0xB0 736[ 4.949478] qcom,slave-addr = 0xB0 737[ 5.084081] msm_camera_config_single_vreg : can't find sub reg name 738[ 5.088781] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 739[ 5.095186] msm_camera_config_single_vreg : can't find sub reg name 740[ 5.104231] msm_cci_init:1382: hw_version = 0x10020005 741[ 5.104254] read_eeprom_memory 157 742[ 5.104691] msm_cci_irq:1712 MASTER_0 error 0x10000000 743[ 5.104719] msm_cci_i2c_read:906 read_words = 0, exp words = 1 744[ 5.104724] msm_cci_i2c_read_bytes:989 failed rc -22 745[ 5.104729] read_eeprom_memory 173 error 746[ 5.104734] msm_eeprom_platform_probe read_eeprom_memory failed 747[ 5.112958] msm_camera_config_single_vreg : can't find sub reg name 748[ 5.117172] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@9 failed with error -22 749[ 5.124664] MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x40030003 750[ 5.124674] MSM-CPP cpp_init_hardware:881 stream_cnt:0 751[ 5.136227] __msm_jpeg_init:1537] Jpeg Device id 0 752[ 5.140499] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17 753[ 5.144216] thermal thermal_zone1: failed to read out thermal zone 1 754[ 5.144414] thermal thermal_zone2: failed to read out thermal zone 2 755[ 5.144592] thermal thermal_zone3: failed to read out thermal zone 3 756[ 5.145089] qpnp_vadc_read: no vadc_chg_vote found 757[ 5.145095] qpnp_vadc_get_temp: VADC read error with -22 758[ 5.145100] thermal thermal_zone4: failed to read out thermal zone 4 759[ 5.166463] device-mapper: uevent: version 1.0.3 760[ 5.166616] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com 761[ 5.166704] device-mapper: req-crypt: dm-req-crypt successfully initalized. 762[ 5.166704] 763[ 5.167554] sdhci: Secure Digital Host Controller Interface driver 764[ 5.167558] sdhci: Copyright(c) Pierre Ossman 765[ 5.167566] sdhci-pltfm: SDHCI platform and OF driver helper 766[ 5.168160] qcom_ice_get_pdevice: found ice device ffffffc0acc62800 767[ 5.168165] qcom_ice_get_pdevice: matching platform device ffffffc0ae5ad400 768[ 5.172915] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8001cf0000 769[ 5.173310] sdhci_msm 7824900.sdhci: No vmmc regulator found 770[ 5.173317] sdhci_msm 7824900.sdhci: No vqmmc regulator found 771[ 5.173622] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode 772[ 5.203325] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled 773[ 5.222568] sdhci_msm 7864900.sdhci: No vmmc regulator found 774[ 5.222575] sdhci_msm 7864900.sdhci: No vqmmc regulator found 775[ 5.222897] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode 776[ 5.253374] qcom,leds-qpnp: probe of leds-qpnp-21 failed with error -10 777[ 5.258090] tz_log 8600720.tz-log: Hyp log service is not supported 778[ 5.259032] hidraw: raw HID events driver (C) Jiri Kosina 779[ 5.259378] usbcore: registered new interface driver usbhid 780[ 5.259383] usbhid: USB HID core driver 781[ 5.259678] ashmem: initialized 782[ 5.260277] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm 783[ 5.262641] mmc0: Out-of-interrupt timeout is 50[ms] 784[ 5.262648] mmc0: BKOPS_EN equals 0x2 785[ 5.262653] mmc0: eMMC FW version: 0xa5 786[ 5.262657] mmc0: CMDQ supported: depth: 32 787[ 5.262662] mmc0: cache barrier support 1 flush policy 1 788[ 5.268285] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. 789[ 5.273413] devfreq soc:qcom,cpubw: Couldn't update frequency transition information. 790[ 5.273564] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information. 791[ 5.274292] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24 792[ 5.274550] desc-base: 0xffffff8001d5e000 trans-base: 0xffffff8001e81000 793[ 5.274550] desc_dma 0xf4479000 trans_dma: 0xf4880000 794[ 5.274566] mmc0: CMDQ enabled on card 795[ 5.274576] mmc0: new HS400 MMC card at address 0001 796[ 5.274935] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=2 (0xffffffc0ac082200) 797[ 5.274944] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=2 (0xffffffc0ac082208) 798[ 5.275046] mmcblk0: mmc0:0001 HBG4a2 29.1 GiB 799[ 5.275139] mmcblk0rpmb: mmc0:0001 HBG4a2 partition 3 4.00 MiB 800[ 5.275160] coresight-fuse a601c.fuse: Fuse initialized 801[ 5.275514] coresight-cti: probe of 6010000.cti failed with error -1 802[ 5.275540] coresight-cti: probe of 6011000.cti failed with error -1 803[ 5.275565] coresight-cti: probe of 6012000.cti failed with error -1 804[ 5.275589] coresight-cti: probe of 6013000.cti failed with error -1 805[ 5.275614] coresight-cti: probe of 6014000.cti failed with error -1 806[ 5.275638] coresight-cti: probe of 6015000.cti failed with error -1 807[ 5.275663] coresight-cti: probe of 6016000.cti failed with error -1 808[ 5.275687] coresight-cti: probe of 6017000.cti failed with error -1 809[ 5.275711] coresight-cti: probe of 6018000.cti failed with error -1 810[ 5.275736] coresight-cti: probe of 6019000.cti failed with error -1 811[ 5.275761] coresight-cti: probe of 601a000.cti failed with error -1 812[ 5.275785] coresight-cti: probe of 601b000.cti failed with error -1 813[ 5.275810] coresight-cti: probe of 601c000.cti failed with error -1 814[ 5.275835] coresight-cti: probe of 601d000.cti failed with error -1 815[ 5.275859] coresight-cti: probe of 601e000.cti failed with error -1 816[ 5.275885] coresight-cti: probe of 601f000.cti failed with error -1 817[ 5.275909] coresight-cti: probe of 6198000.cti failed with error -1 818[ 5.275934] coresight-cti: probe of 6199000.cti failed with error -1 819[ 5.275958] coresight-cti: probe of 619a000.cti failed with error -1 820[ 5.275982] coresight-cti: probe of 619b000.cti failed with error -1 821[ 5.276007] coresight-cti: probe of 61b8000.cti failed with error -1 822[ 5.276031] coresight-cti: probe of 61b9000.cti failed with error -1 823[ 5.276056] coresight-cti: probe of 61ba000.cti failed with error -1 824[ 5.276081] coresight-cti: probe of 61bb000.cti failed with error -1 825[ 5.276105] coresight-cti: probe of 6128000.cti failed with error -1 826[ 5.276129] coresight-cti: probe of 6124000.cti failed with error -1 827[ 5.276154] coresight-cti: probe of 6134000.cti failed with error -1 828[ 5.276179] coresight-cti: probe of 6139000.cti failed with error -1 829[ 5.276204] coresight-cti: probe of 613c000.cti failed with error -1 830[ 5.276228] coresight-cti: probe of 610c000.cti failed with error -1 831[ 5.276585] coresight-csr 6001000.csr: CSR initialized 832[ 5.276937] coresight-tmc: probe of 6028000.tmc failed with error -1 833[ 5.277073] coresight-tmc 6027000.tmc: failed to get flush cti 834[ 5.277079] coresight-tmc 6027000.tmc: failed to get reset cti 835[ 5.277185] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 836[ 5.277186] coresight-tmc 6027000.tmc: TMC initialized 837[ 5.278726] nidnt boot config: 0 838[ 5.279690] coresight-tpiu 6020000.tpiu: NIDnT on SDCARD only mode 839[ 5.279779] coresight-tpiu 6020000.tpiu: TPIU initialized 840[ 5.281140] mmc_ffu start,mid:144,name:HBG4a2,fw_ver:165 841[ 5.281146] mmc_ffu end 842[ 5.281588] coresight-replicator 6026000.replicator: REPLICATOR initialized 843[ 5.282002] coresight-stm: probe of 6002000.stm failed with error -1 844[ 5.282434] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized 845[ 5.283202] usbcore: registered new interface driver snd-usb-audio 846[ 5.297043] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa 847[ 5.302088] u32 classifier 848[ 5.302093] Actions configured 849[ 5.302127] Netfilter messages via NETLINK v0.30. 850[ 5.302174] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 851[ 5.302513] ctnetlink v0.93: registering with nfnetlink. 852[ 5.303056] xt_time: kernel timezone is -0000 853[ 5.303254] ip_tables: (C) 2000-2006 Netfilter Core Team 854[ 5.303390] arp_tables: (C) 2002 David S. Miller 855[ 5.303431] TCP: cubic registered 856[ 5.303439] Initializing XFRM netlink socket 857[ 5.303772] NET: Registered protocol family 10 858[ 5.304505] mip6: Mobile IPv6 859[ 5.304528] ip6_tables: (C) 2000-2006 Netfilter Core Team 860[ 5.304650] sit: IPv6 over IPv4 tunneling driver 861[ 5.305002] NET: Registered protocol family 17 862[ 5.305024] NET: Registered protocol family 15 863[ 5.305057] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 864[ 5.305067] Ebtables v2.0 registered 865[ 5.305163] Bluetooth: ffffffc04eec7cb8 866[ 5.305175] Bluetooth: ffffffc04eec7ca8Bluetooth: ffffffc04eec7ce8 867[ 5.305209] Bluetooth: ffffffc04eec7cc8Bluetooth: ffffffc04eec7cc8 868[ 5.305223] Bluetooth: ffffffc04eec7ca8Bluetooth: ffffffc04eec7d18 869[ 5.305239] Bluetooth: ffffffc04eec7cf8<6>[ 5.305277] l2tp_core: L2TP core driver, V2.0 870[ 5.305292] l2tp_ppp: PPPoL2TP kernel driver, V2.0 871[ 5.305300] l2tp_ip: L2TP IP encapsulation support (L2TPv3) 872[ 5.305317] l2tp_netlink: L2TP netlink interface 873[ 5.305343] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) 874[ 5.305365] l2tp_debugfs: L2TP debugfs support 875[ 5.305373] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 876[ 5.306052] NET: Registered protocol family 27 877[ 5.310680] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped. 878[ 5.312558] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped. 879[ 5.315534] sps:BAM 0x0000000007104000 is registered. 880[ 5.318485] qpnp-smbcharger qpnp-smbcharger-18: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent! 881[ 5.318638] smbcharger_charger_otg: no parameters 882[ 5.318746] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 0 last_enable 0 883[ 5.319323] ------------[ cut here ]------------ 884[ 5.319337] WARNING: CPU: 7 PID: 140 at /home/work/mido-n-stable-build/kernel/msm-3.18/kernel/irq/manage.c:448 __enable_irq+0x4c/0x90() 885[ 5.319342] Unbalanced enable for IRQ 259 886[ 5.319346] Modules linked in: 887[ 5.319355] CPU: 7 PID: 140 Comm: kworker/7:1 Tainted: G W 3.18.31-perf-g489aada4 #1 888[ 5.319360] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) 889[ 5.319369] Workqueue: events status_change_work 890[ 5.319375] Call trace: 891[ 5.319383] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c 892[ 5.319389] [<ffffffc00008a294>] show_stack+0x20/0x28 893[ 5.319397] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 894[ 5.319403] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 895[ 5.319408] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac 896[ 5.319414] [<ffffffc0000fb558>] __enable_irq+0x4c/0x90 897[ 5.319419] [<ffffffc0000fb620>] enable_irq+0x84/0xac 898[ 5.319424] [<ffffffc0008e37c0>] status_change_work+0x16c/0xb88 899[ 5.319432] [<ffffffc0000bdd70>] process_one_work+0x264/0x440 900[ 5.319438] [<ffffffc0000be79c>] worker_thread+0x32c/0x448 901[ 5.319445] [<ffffffc0000c314c>] kthread+0xf8/0x100 902[ 5.319449] ---[ end trace 0af8bdd5bcf4f305 ]--- 903[ 5.321125] set_usb_charge_mode_par on = 2 904[ 5.324575] qpnp-smbcharger qpnp-smbcharger-18: node /soc/qcom,spmi@200f000/qcom,pmi8950@2/qcom,qpnp-smbcharger IO resource absent! 905[ 5.352718] msm-dwc3 7000000.ssusb: Avail curr from USB = 500 906[ 5.359325] qpnp-smbcharger qpnp-smbcharger-18: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1 907[ 5.360728] EDAC DEVICE0: Giving out device to module soc:arm64-cpu-erp controller cache: DEV soc:arm64-cpu-erp (INTERRUPT) 908[ 5.361114] ARM64 CPU ERP: Could not find <cci-irq> IRQ property. Proceeding anyway. 909[ 5.361120] ARM64 CPU ERP: SBE detection is disabled. 910[ 5.362444] Registered cp15_barrier emulation handler 911[ 5.362462] Registered setend emulation handler 912[ 5.362734] Loading compiled-in X.509 certificates 913[ 5.364294] Loaded X.509 cert 'Magrathea: Glacier signing key: 29755ebc26d45d342a5aa32405a8bc12bf83070a' 914[ 5.365623] Key type encrypted registered 915[ 5.446712] fastrpc soc:qcom,adsprpc-mem: for adsp_rh segments only will be dumped. 916[ 5.448815] RNDIS_IPA module is loaded. 917[ 5.449204] file system registered 918[ 5.449254] mbim_init: initialize 1 instances 919[ 5.449306] mbim_init: Initialized 1 ports 920[ 5.450447] rndis_qc_init: initialize rndis QC instance 921[ 5.450638] Number of LUNs=8 922[ 5.450647] Mass Storage Function, version: 2009/09/11 923[ 5.450654] LUN: removable file: (no medium) 924[ 5.450668] Number of LUNs=1 925[ 5.450710] LUN: removable file: (no medium) 926[ 5.450714] Number of LUNs=1 927[ 5.450939] android_usb gadget: android_usb ready 928[ 5.452230] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input4 929[ 5.452544] qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-03-02 22:19:12 UTC (5264352) 930[ 5.452901] pwm-ir soc:pwm_ir: reg-id = vdd, low-active = 0, use-timer = 0 931[ 5.453175] Registered IR keymap rc-lirc 932[ 5.453327] input: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0/input5 933[ 5.453386] rc0: pwm-ir as /devices/soc/soc:pwm_ir/rc/rc0 934[ 5.453513] rc rc0: lirc_dev: driver ir-lirc-codec (pwm-ir) registered at minor = 0 935[ 5.456941] msm-core initialized without polling period 936[ 5.460217] parse_cpu_levels: idx 1 276 937[ 5.460231] ------------[ cut here ]------------ 938[ 5.460242] WARNING: CPU: 5 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/cpuidle/lpm-levels-of.c:724 parse_cluster+0x790/0x948() 939[ 5.460246] calculate_residency: Incorrect power attributes for LPM 940[ 5.460251] Modules linked in: 941[ 5.460261] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 942[ 5.460266] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) 943[ 5.460271] Call trace: 944[ 5.460280] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c 945[ 5.460286] [<ffffffc00008a294>] show_stack+0x20/0x28 946[ 5.460295] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 947[ 5.460301] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 948[ 5.460306] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac 949[ 5.460312] [<ffffffc000965b94>] parse_cluster+0x790/0x948 950[ 5.460318] [<ffffffc0009658bc>] parse_cluster+0x4b8/0x948 951[ 5.460324] [<ffffffc000965dd4>] lpm_of_parse_cluster+0x88/0xb0 952[ 5.460330] [<ffffffc0009622f4>] lpm_probe+0x48/0x33c 953[ 5.460338] [<ffffffc0005cf840>] platform_drv_probe+0x44/0x90 954[ 5.460344] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c 955[ 5.460350] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 956[ 5.460356] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc 957[ 5.460361] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 958[ 5.460367] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 959[ 5.460372] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 960[ 5.460378] [<ffffffc0005cf768>] __platform_driver_register+0x78/0x84 961[ 5.460384] [<ffffffc001516c90>] lpm_levels_module_init+0x24/0x4c 962[ 5.460390] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 963[ 5.460398] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 964[ 5.460404] [<ffffffc000db797c>] kernel_init+0x20/0xe0 965[ 5.460409] ---[ end trace 0af8bdd5bcf4f307 ]--- 966[ 5.460557] parse_cpu_levels: idx 1 286 967[ 5.460564] ------------[ cut here ]------------ 968[ 5.460571] WARNING: CPU: 5 PID: 1 at /home/work/mido-n-stable-build/kernel/msm-3.18/drivers/cpuidle/lpm-levels-of.c:724 parse_cluster+0x790/0x948() 969[ 5.460575] calculate_residency: Incorrect power attributes for LPM 970[ 5.460579] Modules linked in: 971[ 5.460587] CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 3.18.31-perf-g489aada4 #1 972[ 5.460591] Hardware name: Qualcomm Technologies, Inc. MSM8953 QRD SKU3 (DT) 973[ 5.460595] Call trace: 974[ 5.460601] [<ffffffc00008a028>] dump_backtrace+0x0/0x24c 975[ 5.460607] [<ffffffc00008a294>] show_stack+0x20/0x28 976[ 5.460613] [<ffffffc000dbe0fc>] dump_stack+0x80/0xa4 977[ 5.460618] [<ffffffc0000a5950>] warn_slowpath_common+0x94/0xb8 978[ 5.460623] [<ffffffc0000a59fc>] warn_slowpath_fmt+0x88/0xac 979[ 5.460629] [<ffffffc000965b94>] parse_cluster+0x790/0x948 980[ 5.460635] [<ffffffc0009658bc>] parse_cluster+0x4b8/0x948 981[ 5.460641] [<ffffffc000965dd4>] lpm_of_parse_cluster+0x88/0xb0 982[ 5.460647] [<ffffffc0009622f4>] lpm_probe+0x48/0x33c 983[ 5.460653] [<ffffffc0005cf840>] platform_drv_probe+0x44/0x90 984[ 5.460658] [<ffffffc0005cd8e8>] driver_probe_device+0xe0/0x22c 985[ 5.460664] [<ffffffc0005cdafc>] __driver_attach+0x74/0xa0 986[ 5.460669] [<ffffffc0005cc8e8>] bus_for_each_dev+0x9c/0xcc 987[ 5.460675] [<ffffffc0005cd344>] driver_attach+0x2c/0x34 988[ 5.460680] [<ffffffc0005ccfb4>] bus_add_driver+0x104/0x1d4 989[ 5.460686] [<ffffffc0005ce580>] driver_register+0x9c/0xe8 990[ 5.460692] [<ffffffc0005cf768>] __platform_driver_register+0x78/0x84 991[ 5.460698] [<ffffffc001516c90>] lpm_levels_module_init+0x24/0x4c 992[ 5.460703] [<ffffffc000082b70>] do_one_initcall+0x194/0x1b0 993[ 5.460709] [<ffffffc0014d1b94>] kernel_init_freeable+0x1d0/0x284 994[ 5.460715] [<ffffffc000db797c>] kernel_init+0x20/0xe0 995[ 5.460719] ---[ end trace 0af8bdd5bcf4f308 ]--- 996[ 5.464460] qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl 997[ 5.466617] rmnet_ipa started initialization 998[ 5.466631] IPA SSR support = True 999[ 5.466635] IPA ipa-loaduC = True 1000[ 5.466640] IPA SG support = True 1001[ 5.468559] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. 1002[ 5.468566] ipa ipa2_uc_state_check:301 uC is not loaded 1003[ 5.469554] rmnet_ipa completed initialization 1004[ 5.474659] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully 1005[ 5.485738] msm8952-asoc-wcd c051000.sound: default codec configured 1006[ 5.489258] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered 1007[ 5.489302] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517) 1008[ 5.490447] vdd_vreg: disabling 1009[ 5.490454] adv_vreg: disabling 1010[ 5.490481] gfx_mem_acc_corner: disabling 1011[ 5.490487] apc_mem_acc_corner: disabling 1012[ 5.490499] clock_late_init: Removing enables held for handed-off clocks 1013[ 5.494305] ALSA device list: 1014[ 5.494310] No soundcards found. 1015[ 5.494385] Warning: unable to open an initial console. 1016[ 5.494684] Freeing unused kernel memory: 868K (ffffffc0014d1000 - ffffffc0015aa000) 1017[ 5.494713] Freeing alternatives memory: 80K (ffffffc0015aa000 - ffffffc0015be000) 1018[ 5.495942] init: init first stage started! 1019[ 5.501427] SELinux: 2048 avtab hash slots, 14668 rules. 1020[ 5.509733] SELinux: 2048 avtab hash slots, 14668 rules. 1021[ 5.509765] SELinux: 1 users, 2 roles, 1183 types, 0 bools, 1 sens, 1024 cats 1022[ 5.509775] SELinux: 63 classes, 14668 rules 1023[ 5.512267] SELinux: Class can_socket not defined in policy. 1024[ 5.512276] SELinux: the above unknown classes and permissions will be denied 1025[ 5.512301] SELinux: Completing initialization. 1026[ 5.512305] SELinux: Setting up existing superblocks. 1027[ 5.512320] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1028[ 5.512343] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts 1029[ 5.512446] SELinux: initialized (dev bdev, type bdev), not configured for labeling 1030[ 5.512459] SELinux: initialized (dev proc, type proc), uses genfs_contexts 1031[ 5.512479] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts 1032[ 5.544494] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs 1033[ 5.544513] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs 1034[ 5.544522] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling 1035[ 5.544531] SELinux: initialized (dev aio, type aio), not configured for labeling 1036[ 5.544542] SELinux: initialized (dev devpts, type devpts), uses transition SIDs 1037[ 5.544565] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts 1038[ 5.544626] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1039[ 5.544651] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts 1040[ 5.555599] audit: type=1403 audit(5264352.589:2): policy loaded auid=4294967295 ses=4294967295 1041[ 5.556269] audit: type=1404 audit(5264352.589:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 1042[ 5.580239] init: (Initializing SELinux enforcing took 0.08s.) 1043[ 5.583760] init: init second stage started! 1044[ 5.591600] init: Running restorecon... 1045[ 5.825777] init: waitpid failed: No child processes 1046[ 5.826060] init: (Loading properties from /default.prop took 0.00s.) 1047[ 5.827734] init: /init.rc: 671: invalid keyword 'chown' 1048[ 5.827750] init: /init.rc: 672: invalid keyword 'chmod' 1049[ 5.827771] init: /init.rc: 677: invalid keyword 'system' 1050[ 5.827790] init: /init.rc: 683: invalid keyword 'system' 1051[ 5.827891] init: (Parsing /init.environ.rc took 0.00s.) 1052[ 5.828240] init: (Parsing /init.usb.rc took 0.00s.) 1053[ 5.829437] init: /init.qcom.rc: 609: user requires 1 argument 1054[ 5.834921] init: (Parsing init.qcom.usb.rc took 0.00s.) 1055[ 5.836872] init: (Parsing init.msm.usb.configfs.rc took 0.00s.) 1056[ 5.837173] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 259: invalid keyword 'load_all_props' 1057[ 5.837922] init: (Parsing init.carrier.rc took 0.00s.) 1058[ 5.837935] init: (Parsing init.target.rc took 0.00s.) 1059[ 5.838095] init: (Parsing init.qcom.factory.rc took 0.00s.) 1060[ 5.838133] init: could not import file 'init.qcom.test.rc' from '/init.qcom.rc': No such file or directory 1061[ 5.838147] init: (Parsing /init.qcom.rc took 0.01s.) 1062[ 5.839068] init: (Parsing /init.usb.configfs.rc took 0.00s.) 1063[ 5.839156] init: (Parsing /init.zygote64_32.rc took 0.00s.) 1064[ 5.839613] init: (Parsing /init.miui8.rc took 0.00s.) 1065[ 5.839626] init: (Parsing /init.miui.rc took 0.00s.) 1066[ 5.839637] init: (Parsing /init.rc took 0.01s.) 1067[ 5.840178] init: Starting service 'ueventd'... 1068[ 5.841366] audit: type=1400 audit(5264352.879:4): avc: denied { create } for pid=1 comm="init" name="cust" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1069[ 5.841578] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1070[ 5.841790] init: Waiting for /dev/.coldboot_done... 1071[ 5.842351] ueventd: ueventd started! 1072[ 5.927866] random: nonblocking pool is initialized 1073[ 6.296988] ueventd: Coldboot took 0.45s. 1074[ 6.305266] init: Waiting for /dev/.coldboot_done took 0.46s. 1075[ 6.305764] init: console init failed. Open on Console device ttyHSL0 failed(No such file or directory) 1076[ 6.306486] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1077[ 6.307398] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1078[ 6.307575] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts 1079[ 6.309901] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1080[ 6.310460] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory 1081[ 6.310500] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory 1082[ 6.310532] init: write_file: Unable to open '/proc/sys/kernel/sched_tunable_scaling': No such file or directory 1083[ 6.310563] init: write_file: Unable to open '/proc/sys/kernel/sched_latency_ns': No such file or directory 1084[ 6.310594] init: write_file: Unable to open '/proc/sys/kernel/sched_wakeup_granularity_ns': No such file or directory 1085[ 6.310624] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory 1086[ 6.311723] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1087[ 6.311889] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument 1088[ 6.312960] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1089[ 6.316233] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts 1090[ 6.316383] Registered swp emulation handler 1091[ 6.316857] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.swappiness': No such file or directory 1092[ 6.316887] init: write_file: Unable to open '/sys/fs/cgroup/memory/bg/memory.move_charge_at_immigrate': No such file or directory 1093[ 6.317018] audit: type=1400 audit(5264353.349:5): avc: denied { create } for pid=1 comm="init" name="cust" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1094[ 6.317188] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1095[ 6.317630] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1096[ 6.754401] fs_mgr: Enabling dm-verity for system (mode 0) 1097[ 6.754431] fs_mgr: loading verity table: '1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 774155 774155 sha256 152ad6580ea6f4e2a10f017b61c225f644f086756300700652ef67b735066400 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 9 use_fec_from_device /dev/block/bootdevice/by-name/system fec_start 780261 fec_blocks 780261 fec_roots 2 ignore_zero_blocks' 1098[ 6.773855] EXT4-fs (dm-0): mounting with "discard" option, but the device does not support discard 1099[ 6.773869] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,discard 1100[ 6.773892] SELinux: initialized (dev dm-0, type ext4), uses xattr 1101[ 6.774000] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0 1102[ 6.774485] EXT4-fs (mmcblk0p49): VFS: Can't find ext4 filesystem 1103[ 6.774553] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=-1: Invalid argument 1104[ 6.777515] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata 1105[ 6.833032] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1106[ 6.833032] 1107[ 6.833099] e2fsck: ext2fs_open2: Bad magic number in super-block 1108[ 6.833099] 1109[ 6.833110] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks... 1110[ 6.833110] 1111[ 6.833121] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/bootdevice/by-name/userdata 1112[ 6.833121] 1113[ 6.833130] e2fsck: 1114[ 6.833130] 1115[ 6.833141] e2fsck: The superblock could not be read or does not describe a correct ext2 1116[ 6.833141] 1117[ 6.833151] e2fsck: filesystem. If the device is valid and it really contains an ext2 1118[ 6.833151] 1119[ 6.833162] e2fsck: filesystem (and not swap or ufs or something else), then the superblock 1120[ 6.833162] 1121[ 6.833172] e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock: 1122[ 6.833172] 1123[ 6.833182] e2fsck: e2fsck -b 8193 <device> 1124[ 6.833182] 1125[ 6.833191] e2fsck: 1126[ 6.833191] 1127[ 6.833206] e2fsck: e2fsck terminated by exit(8) 1128[ 6.833206] 1129[ 6.833645] EXT4-fs (mmcblk0p49): VFS: Can't find ext4 filesystem 1130[ 6.833693] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=-1 1131[ 6.833993] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/bootdevice/by-name/userdata for mount /data type ext4 ) 1132[ 6.834073] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1133[ 6.834196] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/cust,/cust,ext4)=-1: No such file or directory 1134[ 6.834219] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/cust 1135[ 6.843866] audit: type=1400 audit(5264353.879:6): avc: denied { getattr } for pid=433 comm="e2fsck" path="/dev/block/mmcblk0p48" dev="tmpfs" ino=13686 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 1136[ 6.843977] audit: type=1400 audit(5264353.879:7): avc: denied { getattr } for pid=433 comm="e2fsck" path="/dev/block/mmcblk0p48" dev="tmpfs" ino=13686 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 1137[ 6.844048] audit: type=1400 audit(5264353.879:8): avc: denied { read write } for pid=433 comm="e2fsck" name="mmcblk0p48" dev="tmpfs" ino=13686 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0 1138[ 6.844897] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1139[ 6.844897] 1140[ 6.844915] e2fsck: /system/bin/e2fsck: Permission denied while trying to open /dev/block/bootdevice/by-name/cust 1141[ 6.844915] 1142[ 6.844926] e2fsck: You must have r/w access to the filesystem or be root 1143[ 6.844926] 1144[ 6.844939] e2fsck: e2fsck terminated by exit(8) 1145[ 6.844939] 1146[ 6.850960] EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts: barrier=1 1147[ 6.850982] SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr 1148[ 6.851075] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/cust,target=/cust,type=ext4)=0 1149[ 6.854009] init: (Parsing /system/etc/init/atrace.rc took 0.00s.) 1150[ 6.854252] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.) 1151[ 6.854497] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.) 1152[ 6.854782] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.) 1153[ 6.855049] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.) 1154[ 6.855264] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.) 1155[ 6.855515] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.) 1156[ 6.855733] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.) 1157[ 6.856037] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.) 1158[ 6.856250] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.) 1159[ 6.856497] init: (Parsing /system/etc/init/installd.rc took 0.00s.) 1160[ 6.856706] init: (Parsing /system/etc/init/keystore.rc took 0.00s.) 1161[ 6.856983] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.) 1162[ 6.857215] init: (Parsing /system/etc/init/logd.rc took 0.00s.) 1163[ 6.857466] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.) 1164[ 6.857679] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.) 1165[ 6.857926] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.) 1166[ 6.858146] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.) 1167[ 6.858400] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.) 1168[ 6.858612] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.) 1169[ 6.858863] init: (Parsing /system/etc/init/netd.rc took 0.00s.) 1170[ 6.859101] init: (Parsing /system/etc/init/racoon.rc took 0.00s.) 1171[ 6.859360] init: (Parsing /system/etc/init/rild.rc took 0.00s.) 1172[ 6.859602] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.) 1173[ 6.859856] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.) 1174[ 6.860139] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.) 1175[ 6.860423] init: (Parsing /system/etc/init/vdc.rc took 0.00s.) 1176[ 6.860637] init: (Parsing /system/etc/init/vold.rc took 0.00s.) 1177[ 6.869467] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1 1178[ 6.869486] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr 1179[ 6.872252] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1 1180[ 6.872272] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr 1181[ 6.876157] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1 1182[ 6.876176] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr 1183[ 6.879049] SELinux: initialized (dev mmcblk0p1, type vfat), uses mountpoint labeling 1184[ 6.879333] EXT4-fs (mmcblk0p30): VFS: Can't find ext4 filesystem 1185[ 6.879517] audit: type=1400 audit(5264353.909:9): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1186[ 6.879587] audit: type=1400 audit(5264353.909:10): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1187[ 6.880724] init: Starting service 'logd'... 1188[ 6.903461] logd.auditd: start 1189[ 6.903495] logd.klogd: 6903471768 1190[ 7.390418] type=1400 audit(5264354.429:11): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1191[ 7.390547] type=1400 audit(5264354.429:12): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1192[ 7.489861] type=1400 audit(5264354.519:13): avc: denied { setattr } for pid=1 comm="init" name="/" dev="mmcblk0p48" ino=2 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1193[ 7.490075] type=1400 audit(5264354.519:14): avc: denied { setattr } for pid=1 comm="init" name="lost+found" dev="mmcblk0p48" ino=11 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir permissive=0 1194[ 7.490285] init_hook_E: Could not find /cust/cust_variant and /data/miui/cust_variant 1195[ 7.490893] init_hook_I: cust prop white key: persist.sys.timezone 1196[ 7.490909] init_hook_I: cust prop white key: ro.carrier.name 1197[ 7.490921] init_hook_I: cust prop white key: ro.miui.cust_variant 1198[ 7.490935] init_hook_I: cust prop white key: ro.miui.region 1199[ 7.490949] init_hook_I: cust prop white key: ro.product.locale.language 1200[ 7.490963] init_hook_I: cust prop white key: ro.product.locale.region 1201[ 7.490977] init_hook_I: cust prop white key: ro.miui.mcc 1202[ 7.490991] init_hook_I: cust prop white key: ro.miui.mnc 1203[ 7.491001] init_hook_I: cust prop white key: ro.com.android.mobiledata 1204[ 7.491015] init_hook_I: cust prop white key: ro.build.hardware.version 1205[ 7.491066] init: (Loading properties from /data/miui/cts.prop took 0.00s.) 1206[ 7.492291] init: property_set("ro.cutoff_voltage_mv", "3400") failed 1207[ 7.492823] init: property_set("ro.product.mod_device", "mido_global") failed 1208[ 7.493004] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.) 1209[ 7.493392] init: property_set("ro.telephony.default_network", "22,20") failed 1210[ 7.493415] init: (Loading properties from /system/vendor/default.prop took 0.00s.) 1211[ 7.493443] init: (Loading properties from /system/vendor/power.prop took 0.00s.) 1212[ 7.493457] init: (Loading properties from /system/build.prop took 0.00s.) 1213[ 7.493489] init: (Loading properties from /vendor/build.prop took 0.00s.) 1214[ 7.493513] init: (Loading properties from /factory/factory.prop took 0.00s.) 1215[ 7.493640] init: /recovery not specified in fstab 1216[ 7.494175] init: Starting service 'debuggerd'... 1217[ 7.494772] init: Starting service 'debuggerd64'... 1218[ 7.495651] init: Starting service 'vold'... 1219[ 7.496429] init: Not bootcharting. 1220[ 7.881710] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'... 1221[ 7.896220] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 464) exited with status 0 1222[ 7.904986] init: Starting service 'perfd'... 1223[ 7.907676] init: write_file: Unable to open '/sys/block/dm-1/queue/read_ahead_kb': No such file or directory 1224[ 7.911815] init: Starting service 'carrier_switcher'... 1225[ 8.034599] init: SELinux: Could not stat /sys/hwconf: No such file or directory. 1226[ 8.035318] init: Service checkpath does not have a SELinux domain defined. 1227[ 8.036969] init_hook_E: Could not find /cust/cust_variant and /data/miui/cust_variant 1228[ 8.037022] init_hook_I: cust prop white key: persist.sys.timezone 1229[ 8.037035] init_hook_I: cust prop white key: ro.carrier.name 1230[ 8.037045] init_hook_I: cust prop white key: ro.miui.cust_variant 1231[ 8.037056] init_hook_I: cust prop white key: ro.miui.region 1232[ 8.037071] init_hook_I: cust prop white key: ro.product.locale.language 1233[ 8.037082] init_hook_I: cust prop white key: ro.product.locale.region 1234[ 8.037092] init_hook_I: cust prop white key: ro.miui.mcc 1235[ 8.037102] init_hook_I: cust prop white key: ro.miui.mnc 1236[ 8.037115] init_hook_I: cust prop white key: ro.com.android.mobiledata 1237[ 8.037126] init_hook_I: cust prop white key: ro.build.hardware.version 1238[ 8.037171] init: (Loading properties from /data/miui/cts.prop took 0.00s.) 1239[ 8.037213] init: (Loading properties from /cust/cust/miui_customized.prop took 0.00s.) 1240[ 8.037410] init: Starting service 'logd-reinit'... 1241[ 8.041258] subsys-pil-tz c200000.qcom,lpass: adsp: loading from 0x000000008d600000 to 0x000000008e700000 1242[ 8.049480] logd.daemon: reinit 1243[ 8.231447] subsys-pil-tz c200000.qcom,lpass: adsp: Brought out of reset 1244[ 8.268329] subsys-pil-tz c200000.qcom,lpass: adsp: Power/Clock ready interrupt received 1245[ 8.268334] subsys-pil-tz c200000.qcom,lpass: Subsystem error monitoring/handling services are up 1246[ 8.268394] L-Notify: Generel: 7 1247[ 8.268656] init: Service 'carrier_switcher' (pid 466) exited with status 0 1248[ 8.268774] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000 1249[ 8.268811] init: Service 'logd-reinit' (pid 475) exited with status 0 1250[ 8.268894] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: pil get failed, 1251[ 8.268901] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image loading failed 1252[ 8.268956] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'... 1253[ 8.282510] msm8952-asoc-wcd c051000.sound: default codec configured 1254[ 8.286233] msm8952-asoc-wcd c051000.sound: ASoC: platform (null) not registered 1255[ 8.286266] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-517) 1256[ 8.298524] msm8952-asoc-wcd c051000.sound: default codec configured 1257[ 8.303444] wcd-spmi-core msm8x16_wcd_codec-11: Error: regulator not found:cdc-vdd-spkdrv 1258[ 8.308462] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer 1259[ 8.308477] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer 1260[ 8.308507] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer 1261[ 8.308514] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer 1262[ 8.308820] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for INT_FM_TX --> INTERNAL_FM_TX --> SEC_MI2S_RX Port Mixer 1263[ 8.308827] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT_FM_TX -> INTERNAL_FM_TX -> SEC_MI2S_RX Port Mixer 1264[ 8.313290] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer 1265[ 8.313303] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer 1266[ 8.313321] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer 1267[ 8.313327] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer 1268[ 8.315133] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX 1269[ 8.315140] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3 1270[ 8.318215] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer 1271[ 8.318223] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer 1272[ 8.318627] init: property_set("ro.sf.lcd_density", "480") failed 1273[ 8.318719] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer 1274[ 8.318726] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer 1275[ 8.319663] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX 1276[ 8.319670] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX 1277[ 8.341089] apr_tal:Q6 Is Up 1278[ 8.349136] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to create SEC_MI2S_RX Port Mixer debugfs file 1279[ 8.357068] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths 1280[ 8.361102] wcd-spmi-core msm8x16_wcd_codec-11: ASoC: mux RX3 MIX1 INP3 has no paths 1281[ 8.361228] wcd-spmi-core msm8x16_wcd_codec-11: ASoC: mux RX2 MIX1 INP3 has no paths 1282[ 8.378181] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service 1283[ 8.414762] msm8952-asoc-wcd c051000.sound: control 3:0:0:IEC958 Playback PCM Stream:0 is already present 1284[ 8.414777] msm-hdmi-dba-codec-rx soc:qcom,msm-hdmi-dba-codec-rx: ASoC: Failed to add IEC958 Playback PCM Stream: -16 1285[ 8.414785] msm_dba_get_probed_device: Device not found (adv7533, 0) 1286[ 8.414790] msm_dba_register_client: Device not found (adv7533, 0) 1287[ 8.414796] msm_hdmi_dba_codec_rx_init_dba: error in registering audio client 0 1288[ 8.431866] input: msm8953-snd-card-mtp Headset Jack as /devices/soc/c051000.sound/sound/card0/input6 1289[ 8.432067] input: msm8953-snd-card-mtp Button Jack as /devices/soc/c051000.sound/sound/card0/input7 1290[ 8.580686] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 492) exited with status 0 1291[ 8.583453] init: Starting service 'healthd'... 1292[ 8.584066] init: Starting service 'qcom-c_core-sh'... 1293[ 8.584705] init: Starting service 'irsc_util'... 1294[ 8.585330] init: Starting service 'rmt_storage'... 1295[ 8.585765] init: cannot find '/system/bin/rfs_access' (No such file or directory), disabling 'rfs_access' 1296[ 8.586029] init: Starting service 'tftp_server'... 1297[ 8.586717] init: Starting service 'config_bt_addr'... 1298[ 8.587359] init: Starting service 'config_bluetooth'... 1299[ 8.588098] init: Starting service 'sensor-sh'... 1300[ 8.588808] init: Starting service 'cs-early-boot'... 1301[ 8.589504] init: Starting service 'qcom-usb-sh'... 1302[ 8.590453] init: Starting service 'qseecomd'... 1303[ 8.591337] init: Starting service 'per_mgr'... 1304[ 8.592168] init: Starting service 'getcolorid'... 1305[ 8.592752] init: Starting service 'setlockstate'... 1306[ 8.593691] init: Starting service 'ssService'... 1307[ 8.594525] init: Starting service 'lmkd'... 1308[ 8.595409] init: Starting service 'servicemanager'... 1309[ 8.596226] init: Starting service 'surfaceflinger'... 1310[ 8.596772] init: couldn't write 557 to /sys/fs/cgroup/stune/foreground/tasks: No such file or directory 1311[ 8.597743] init: Service 'setlockstate' (pid 553) exited with status 0 1312[ 8.602250] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory 1313[ 8.602295] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory 1314[ 8.602329] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory 1315[ 8.602362] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory 1316[ 8.602396] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory 1317[ 8.602429] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory 1318[ 8.602463] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory 1319[ 8.602496] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory 1320[ 8.602529] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory 1321[ 8.602562] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory 1322[ 8.602596] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory 1323[ 8.602660] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory 1324[ 8.602853] init: Service 'getcolorid' (pid 551) exited with status 0 1325[ 8.602925] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory 1326[ 8.602962] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory 1327[ 8.602995] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory 1328[ 8.603027] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory 1329[ 8.603064] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory 1330[ 8.603096] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory 1331[ 8.603128] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory 1332[ 8.603160] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory 1333[ 8.603396] init: sanitize_path: Failed to locate path /dev/block/bootdevice/by-name/rawdump: No such file or directory 1334[ 8.603410] init: do_chown: sanitize_path failed for path: /dev/block/bootdevice/by-name/rawdump prefix:/dev/block/ 1335[ 8.603445] init: sanitize_path: Failed to locate path /dev/block/bootdevice/by-name/rawdump: No such file or directory 1336[ 8.603458] init: do_chmod: failed for /dev/block/bootdevice/by-name/rawdump..prefix(/dev/block/) match err 1337[ 8.604398] init: write_file: Unable to open '/config/usb_gadget/g1/bcdUSB': No such file or directory 1338[ 8.604430] init: write_file: Unable to open '/config/usb_gadget/g1/os_desc/use': No such file or directory 1339[ 8.604465] init: write_file: Unable to open '/config/usb_gadget/g1/strings/0x409/serialnumber': No such file or directory 1340[ 8.604499] init: write_file: Unable to open '/config/usb_gadget/g1/strings/0x409/manufacturer': No such file or directory 1341[ 8.604533] init: write_file: Unable to open '/config/usb_gadget/g1/strings/0x409/product': No such file or directory 1342[ 8.605660] init: write_file: Unable to open '/config/usb_gadget/g1/os_desc/b_vendor_code': No such file or directory 1343[ 8.605693] init: write_file: Unable to open '/config/usb_gadget/g1/os_desc/qw_sign': No such file or directory 1344[ 8.605944] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts 1345[ 8.615060] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: write_file: Unable to open '/sys/devices/soc.0/78b8000.i2c/i2c-4/4-0020/input/input0/fw_name': No such file or directory 1346[ 8.615344] init: write_file: Unable to open '/sys/devices/soc.0/78b8000.i2c/i2c-4/4-0020/input/input0/update_fw': No such file or directory 1347[ 8.620444] init: Starting service 'ppd'... 1348[ 8.621229] init: Starting service 'per_proxy'... 1349[ 8.623340] init: Starting service 'exec 3 (/system/bin/vdc)'... 1350[ 8.624113] init: Service 'irsc_util' (pid 541) exited with status 0 1351[ 8.638634] type=1400 audit(5264355.669:15): avc: denied { write } for pid=542 comm="rmt_storage" name="rmts" dev="debugfs" ino=12816 scontext=u:r:rmt_storage:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0 1352[ 8.641069] init: Service 'exec 3 (/system/bin/vdc)' (pid 569) exited with status 0 1353[ 8.650226] of_batterydata_get_best_profile: qrd_msm8953_desay_4100mah found 1354[ 8.662325] FG: fg_batt_profile_init: Battery SOC: 49, V: 3860145uV 1355[ 8.662834] of_batterydata_get_best_profile: qrd_msm8953_desay_4100mah found 1356[ 8.692321] type=1400 audit(5264355.729:16): avc: denied { net_raw } for pid=589 comm="pm-service" capability=13 scontext=u:r:per_mgr:s0 tcontext=u:r:per_mgr:s0 tclass=capability permissive=0 1357[ 8.692944] type=1400 audit(5264355.729:17): avc: denied { write } for pid=547 comm="sh" name="/" dev="tmpfs" ino=13304 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=0 1358[ 8.710719] capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use) 1359[ 8.758316] init: Service 'qcom-c_core-sh' (pid 540) exited with status 0 1360[ 8.758525] init: Service 'config_bt_addr' (pid 544) exited with status 0 1361[ 8.761895] init: Starting service 'sensors'... 1362[ 8.763947] init: Service 'sensor-sh' (pid 546) exited with status 0 1363[ 8.764208] enable_store: android_usb: already disabled 1364[ 8.764563] init: avc: denied { set } for property=ro.dbg.coresight.cfg_file pid=592 uid=0 gid=0 scontext=u:r:qti_init_shell:s0 tcontext=u:object_r:coresight_prop:s0 tclass=property_service permissive=0 1365[ 8.764579] init: sys_prop: permission denied uid:0 name:ro.dbg.coresight.cfg_file 1366[ 8.773812] init: Service 'cs-early-boot' (pid 547) exited with status 0 1367[ 8.791668] healthd: BatteryCycleCountPath not found 1368[ 8.804053] init: Service 'qcom-usb-sh' (pid 548) exited with status 0 1369[ 8.804345] type=1400 audit(5264355.839:18): avc: denied { read write } for pid=615 comm="sensors.qcom" name="diag" dev="tmpfs" ino=13763 scontext=u:r:sensors:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1370[ 8.897330] subsys-pil-tz soc:qcom,kgsl-hyp: a506_zap: loading from 0x000000008f000000 to 0x000000008f002000 1371[ 8.908084] init: Service 'config_bluetooth' (pid 545) exited with status 0 1372[ 8.915826] subsys-pil-tz soc:qcom,kgsl-hyp: a506_zap: Brought out of reset 1373[ 8.916986] devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information. 1374[ 8.957803] type=1400 audit(5264355.989:19): avc: denied { read write } for pid=557 comm="surfaceflinger" name="diag" dev="tmpfs" ino=13763 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1375[ 8.977695] init: Starting service 'bootanim'... 1376[ 8.977881] [info] goodix_fb_state_chg_callback go to the goodix_fb_state_chg_callback value = 16 1377[ 9.687411] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem 1378[ 9.688730] IPA received MPSS BEFORE_POWERUP 1379[ 9.689133] ipa ipa2_uc_state_check:301 uC is not loaded 1380[ 9.689154] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. 1381[ 9.690523] IPA BEFORE_POWERUP handling is complete 1382[ 9.696187] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x0000000086c00000 to 0x000000008c200000 1383[ 9.713863] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue. 1384[ 9.716569] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f4b00000 to 0x00000000f4c00000 size 100000 1385[ 9.853394] pil-q6v5-mss 4080000.qcom,mss: MBA boot done 1386[ 10.329606] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288 1387[ 10.329632] get_ice_device_from_storage_type: found ice device ffffffc0acc62800 1388[ 10.447405] get_ice_device_from_storage_type: found ice device ffffffc0acc62800 1389[ 10.450076] QSEECOM: qseecom_create_key: Set the key successfully 1390[ 10.451170] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset 1391[ 10.453769] device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/bootdevice/by-name/userdata to dm-req-crypt ok! 1392[ 10.453769] 1393[ 10.456819] EXT4-fs (dm-1): Ignoring removed nomblk_io_submit option 1394[ 10.461437] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit 1395[ 10.461458] SELinux: initialized (dev dm-1, type ext4), uses xattr 1396[ 10.461577] fs_mgr: check_fs(): mount(/dev/block/dm-1,/data,ext4)=0: Success 1397[ 10.462893] fs_mgr: check_fs(): unmount(/data) succeeded 1398[ 10.462945] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-1 1399[ 10.533256] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received 1400[ 10.533272] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up 1401[ 10.533948] M-Notify: General: 7 1402[ 10.534378] IPA received MPSS AFTER_POWERUP 1403[ 10.534385] IPA AFTER_POWERUP handling is complete 1404[ 10.641279] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service 1405[ 10.733168] apr_tal:Modem Is Up 1406[ 10.743812] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000 1407[ 10.778661] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 1408[ 10.780068] ipa-wan handle_indication_req:133 not send indication 1409[ 10.782107] ipa ipa_uc_response_hdlr:461 IPA uC loaded 1410[ 10.782146] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. 1411[ 10.782549] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received 1412[ 10.784787] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. 1413[ 10.785582] ipa ipa_uc_wdi_event_log_info_handler:322 WDI feature missing 0x1 1414[ 10.785590] ipa ipa_uc_ntn_event_log_info_handler:39 NTN feature missing 0x1 1415[ 10.785618] ipa ipa_sps_irq_control_all:938 EP (5) not allocated. 1416[ 10.937925] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1417[ 10.937925] 1418[ 10.937966] e2fsck: Pass 1: Checking inodes, blocks, and sizes 1419[ 10.937966] 1420[ 10.937978] e2fsck: Pass 2: Checking directory structure 1421[ 10.937978] 1422[ 10.937989] e2fsck: Pass 3: Checking directory connectivity 1423[ 10.937989] 1424[ 10.938000] e2fsck: Pass 4: Checking reference counts 1425[ 10.938000] 1426[ 10.938011] e2fsck: Pass 5: Checking group summary information 1427[ 10.938011] 1428[ 10.938023] e2fsck: data: 4677/1563648 files (11.9% non-contiguous), 694871/6290041 blocks 1429[ 10.938023] 1430[ 10.942135] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard 1431[ 10.942165] SELinux: initialized (dev dm-1, type ext4), uses xattr 1432[ 10.942316] fs_mgr: __mount(source=/dev/block/dm-1,target=/data,type=ext4)=0 1433[ 10.944768] init_hook_I: cust prop white key: persist.sys.timezone 1434[ 10.944796] init_hook_I: cust prop white key: ro.carrier.name 1435[ 10.944807] init_hook_I: cust prop white key: ro.miui.cust_variant 1436[ 10.944817] init_hook_I: cust prop white key: ro.miui.region 1437[ 10.944833] init_hook_I: cust prop white key: ro.product.locale.language 1438[ 10.944845] init_hook_I: cust prop white key: ro.product.locale.region 1439[ 10.944856] init_hook_I: cust prop white key: ro.miui.mcc 1440[ 10.944866] init_hook_I: cust prop white key: ro.miui.mnc 1441[ 10.944878] init_hook_I: cust prop white key: ro.com.android.mobiledata 1442[ 10.944889] init_hook_I: cust prop white key: ro.build.hardware.version 1443[ 10.945280] init: (Loading properties from /cust/cust/us/cust.prop took 0.00s.) 1444[ 10.945315] init: (Loading properties from /data/miui/cts.prop took 0.00s.) 1445[ 10.945337] init: (Loading properties from /cust/cust/miui_customized.prop took 0.00s.) 1446[ 11.139330] init: Starting service 'logd-reinit'... 1447[ 11.150231] logd.daemon: reinit 1448[ 11.158218] init: Service 'logd-reinit' (pid 696) exited with status 0 1449[ 11.160188] init: Starting service 'adbd'... 1450[ 11.163280] init: Not bootcharting. 1451[ 11.163963] read descriptors 1452[ 11.163976] read strings 1453[ 11.164000] mtp_bind_config 1454[ 11.178528] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 1455[ 11.178542] hyp_assign_table: Failed to assign memory protection, ret = -5 1456[ 11.178549] memshare: hyp_assign_phys failed size=2097152 err=-5 1457[ 11.205434] init: Starting service 'exec 4 (/system/bin/tzdatacheck)'... 1458[ 11.214355] init: Service 'exec 4 (/system/bin/tzdatacheck)' (pid 702) exited with status 0 1459[ 11.235271] init: Starting service 'carrier_switcher'... 1460[ 11.236585] init: SELinux: Could not stat /sys/hwconf: No such file or directory. 1461[ 11.236765] init: Service checkpath does not have a SELinux domain defined. 1462[ 11.239227] init: Starting service 'exec 5 (/system/bin/bootstat)'... 1463[ 11.249788] init: Service 'exec 5 (/system/bin/bootstat)' (pid 704) exited with status 0 1464[ 11.253044] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 6 (/system/bin/update_verifier)' 1465[ 11.253561] init: Starting service 'flash_recovery'... 1466[ 11.254314] init: Starting service 'displayfeature'... 1467[ 11.254935] init: Starting service 'qcom-c_main-sh'... 1468[ 11.255586] init: Starting service 'cnd'... 1469[ 11.256341] init: Starting service 'ptt_socket_app'... 1470[ 11.257078] init: Starting service 'cnss_diag'... 1471[ 11.257566] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon' 1472[ 11.257620] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd' 1473[ 11.257965] init: Starting service 'thermal-engine'... 1474[ 11.258795] init: Starting service 'time_daemon'... 1475[ 11.259677] init: Starting service 'wcnss-service'... 1476[ 11.260773] init: Starting service 'imsqmidaemon'... 1477[ 11.261779] init: Starting service 'adsprpcd'... 1478[ 11.262857] init: Starting service 'hvdcp_opti'... 1479[ 11.263741] init: Starting service 'energy-awareness'... 1480[ 11.264702] init: Starting service 'zygote'... 1481[ 11.265832] init: Starting service 'zygote_secondary'... 1482[ 11.266769] init: Starting service 'shelld'... 1483[ 11.267340] init: cannot find '/system/xbin/su' (No such file or directory), disabling 'su_daemon' 1484[ 11.267369] init: cannot find '/bin/otad' (No such file or directory), disabling 'otad' 1485[ 11.267566] init: Service checkpath does not have a SELinux domain defined. 1486[ 11.267773] init: Starting service 'fdpp'... 1487[ 11.268676] init: Starting service 'mqsasd'... 1488[ 11.269587] init: Starting service 'audioserver'... 1489[ 11.270625] init: Starting service 'cameraserver'... 1490[ 11.271041] type=1400 audit(5264358.309:20): avc: denied { read write } for pid=711 comm="cnss_diag" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1491[ 11.272206] type=1400 audit(5264358.309:21): avc: denied { setattr } for pid=710 comm="ptt_socket_app" name="WCNSS_qcom_wlan_nv.bin" dev="mmcblk0p26" ino=12 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:persist_file:s0 tclass=file permissive=0 1492[ 11.272663] type=1400 audit(5264358.309:22): avc: denied { setgid } for pid=710 comm="ptt_socket_app" capability=6 scontext=u:r:wcnss_service:s0 tcontext=u:r:wcnss_service:s0 tclass=capability permissive=0 1493[ 11.273235] init: Starting service 'drm'... 1494[ 11.274225] init: Starting service 'installd'... 1495[ 11.275158] init: Starting service 'keystore'... 1496[ 11.276186] init: Starting service 'mediacodec'... 1497[ 11.277263] init: Starting service 'mediadrm'... 1498[ 11.278265] init: Starting service 'mediaextractor'... 1499[ 11.279132] init: Starting service 'media'... 1500[ 11.280141] init: Starting service 'netd'... 1501[ 11.281255] init: couldn't write 721 to /sys/fs/cgroup/stune/foreground/tasks: No such file or directory 1502[ 11.281310] init: Starting service 'ril-daemon'... 1503[ 11.282320] init: Service 'carrier_switcher' (pid 703) exited with status 0 1504[ 11.282589] init: Service 'ptt_socket_app' (pid 710) exited with status 1 1505[ 11.282746] init: Service 'cnss_diag' (pid 711) exited with status 255 1506[ 11.283331] init: Starting service 'gx_fpd'... 1507[ 11.284361] init: Starting service 'dpmd'... 1508[ 11.285377] init: Starting service 'cnss-daemon'... 1509[ 11.286421] init: Starting service 'loc_launcher'... 1510[ 11.287376] init: Starting service 'qcom-sh'... 1511[ 11.288039] 'opened /dev/adsprpc-smd c 228 0' 1512[ 11.289370] init: Starting service 'atfwd'... 1513[ 11.292082] init: Starting service 'qseeproxydaemon'... 1514[ 11.292765] init: cannot find '/system/vendor/bin/seemp_healthd' (No such file or directory), disabling 'seemp_healthd' 1515[ 11.293133] init: Starting service 'qcamerasvr'... 1516[ 11.293627] init: cannot find '/system/bin/qfp-daemon' (No such file or directory), disabling 'qfp-daemon' 1517[ 11.293961] init: Starting service 'audiod'... 1518[ 11.294526] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator' 1519[ 11.294933] init: Starting service 'mtservice'... 1520[ 11.295947] init: Starting service 'vsimservice'... 1521[ 11.296853] init: Starting service 'mlipayservice'... 1522[ 11.297927] init: Starting service 'gatekeeperd'... 1523[ 11.299379] init: Starting service 'config_bt_addr'... 1524[ 11.301170] init: Starting service 'config_bluetooth'... 1525[ 11.302419] init: Starting service 'cnss_diag'... 1526[ 11.304030] type=1400 audit(5264358.319:23): avc: denied { read write } for pid=715 comm="imsqmidaemon" name="diag" dev="tmpfs" ino=13763 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1527[ 11.309136] init: Service 'time_daemon' is being killed... 1528[ 11.333389] type=1400 audit(5264358.349:24): avc: denied { write } for pid=720 comm="energy-awarenes" name="ptable" dev="debugfs" ino=13022 scontext=u:r:energyawareness:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0 1529[ 11.333892] type=1400 audit(5264358.359:25): avc: denied { read write } for pid=714 comm="wcnss_service" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1530[ 11.336061] init: Service 'time_daemon' (pid 713) killed by signal 9 1531[ 11.336094] init: Service 'time_daemon' (pid 713) killing any children in process group 1532[ 11.336368] init: Service 'energy-awareness' (pid 720) exited with status 0 1533[ 11.337500] init: Starting service 'mcd_init'... 1534[ 11.338492] init: Service checksdkpath does not have a SELinux domain defined. 1535[ 11.339825] type=1400 audit(5264358.369:26): avc: denied { read write } for pid=709 comm="cnd" name="diag" dev="tmpfs" ino=13763 scontext=u:r:cnd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1536[ 11.353177] fdpp: main: start daemon. fdpp: startAsDaemon: called. 1537[ 11.359197] type=1400 audit(5264358.389:27): avc: denied { read write } for pid=759 comm="cnss-daemon" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1538[ 11.371460] wcnss_wlan triggered by userspace 1539[ 11.372166] wcnss_pm_qos_add_request: add request 1540[ 11.372196] wcnss_pm_qos_update_request: update request 100 1541[ 11.377275] type=1400 audit(5264358.409:28): avc: denied { read write } for pid=754 comm="cnss_diag" name="diag" dev="tmpfs" ino=13763 scontext=u:r:wcnss_service:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1542[ 11.378071] wcnss_notif_cb: wcnss notification event: 2 1543[ 11.379815] type=1400 audit(5264358.409:29): avc: denied { read write } for pid=768 comm="thermal-engine" name="diag" dev="tmpfs" ino=13763 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1544[ 11.383563] init: Starting service 'imsdatadaemon'... 1545[ 11.384847] init: Service 'config_bt_addr' (pid 752) exited with status 0 1546[ 11.385045] init: Service 'cnss_diag' (pid 754) exited with status 255 1547[ 11.408654] init: cannot find '/system/bin/qmuxd' (No such file or directory), disabling 'qmuxd' 1548[ 11.417047] init: Starting service 'msm_irqbalance'... 1549[ 11.420510] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x000000008e700000 to 0x000000008ed43000 1550[ 11.423331] wcnss_notif_cb: wcnss notification event: 6 1551[ 11.431568] wcnss: IRIS Reg: 04000004 1552[ 11.432077] type=1400 audit(5264358.459:30): avc: denied { read write } for pid=738 comm="dpmd" name="diag" dev="tmpfs" ino=13763 scontext=u:r:dpmd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1553[ 11.432537] android_work: android_work: sent uevent USB_STATE=CONNECTED 1554[ 11.437574] init: Starting service 'ipacm-diag'... 1555[ 11.473386] msm_thermal:set_enabled enabled = 0 1556[ 11.501722] android_usb gadget: high-speed config #1: 86000c8.android_usb 1557[ 11.504245] init: Starting service 'ipacm'... 1558[ 11.519035] type=1400 audit(5264358.529:31): avc: denied { read write } for pid=838 comm="ipacm-diag" name="diag" dev="tmpfs" ino=13763 scontext=u:r:ipacm-diag:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1559[ 11.560259] android_work: android_work: sent uevent USB_STATE=CONFIGURED 1560[ 11.568381] octvm: [760][arg_idx 3]: /system/bin/mcd init 4 1561[ 11.578188] octvm: try memsw_state device... 1562[ 11.578409] octvm: memsw_state device path:/dev/xiaomi_memsw_state 1563[ 11.606155] type=1400 audit(5264358.639:32): avc: denied { read write } for pid=777 comm="imsdatadaemon" name="diag" dev="tmpfs" ino=13763 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1564[ 11.616927] type=1400 audit(5264358.649:33): avc: denied { net_raw } for pid=777 comm="imsdatadaemon" capability=13 scontext=u:r:ims:s0 tcontext=u:r:ims:s0 tclass=capability permissive=0 1565[ 11.675294] octvm: default config swap off 1566[ 11.675329] octvm: persist.sys.whetstone.level:[2] 1567[ 11.675340] octvm: config swap on 1568[ 11.675436] octvm: discover 1 zram devices, init 1 1569[ 11.676933] init: Starting service 'ril-daemon2'... 1570[ 11.677544] zram0: detected capacity change from 0 to 1073741824 1571[ 11.677597] octvm: config /sys/block/zram0/disksize to 1073741824 success 1572[ 11.677701] octvm: config sysctl /proc/sys/vm/page-cluster to 0 success 1573[ 11.677748] octvm: config sysctl /proc/sys/vm/swappiness to 60 success 1574[ 11.678483] Adding 1048572k swap on /dev/block/zram0. Priority:0 extents:1 across:1048572k SS 1575[ 11.683704] init: property_set("ro.qualcomm.bluetooth.opp", "true") failed 1576[ 11.759936] init: Starting service 'qti'... 1577[ 11.761247] init: property_set("ro.qualcomm.bluetooth.hfp", "true") failed 1578[ 11.770675] init: Service 'mcd_init' (pid 760) exited with status 0 1579[ 11.777528] type=1400 audit(5264358.809:34): avc: denied { read write } for pid=736 comm="rild" name="diag" dev="tmpfs" ino=13763 scontext=u:r:rild:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1580[ 11.830233] type=1400 audit(5264358.859:35): avc: denied { read write } for pid=868 comm="qti" name="diag" dev="tmpfs" ino=13763 scontext=u:r:qti:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1581[ 11.886710] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset 1582[ 11.942050] init: Starting service 'netmgrd'... 1583[ 11.943523] init: Service 'flash_recovery' (pid 706) exited with status 0 1584[ 11.944283] init: property_set("ro.qualcomm.bluetooth.hsp", "true") failed 1585[ 11.994713] type=1400 audit(5264359.029:36): avc: denied { read write } for pid=858 comm="rild" name="diag" dev="tmpfs" ino=13763 scontext=u:r:rild:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1586[ 12.028479] type=1400 audit(5264359.059:37): avc: denied { read write } for pid=883 comm="netmgrd" name="diag" dev="tmpfs" ino=13763 scontext=u:r:netmgrd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1587[ 12.125719] init: property_set("ro.qualcomm.bluetooth.pbap", "true") failed 1588[ 12.126750] init: Starting service 'port-bridge'... 1589