1 /** 2 ****************************************************************************** 3 * @file stm32l4xx_hal_conf.h 4 * @brief HAL configuration file. 5 ****************************************************************************** 6 * @attention 7 * 8 * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2> 9 * 10 * Redistribution and use in source and binary forms, with or without modification, 11 * are permitted provided that the following conditions are met: 12 * 1. Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright notice, 15 * this list of conditions and the following disclaimer in the documentation 16 * and/or other materials provided with the distribution. 17 * 3. Neither the name of STMicroelectronics nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 28 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 ****************************************************************************** 33 */ 34 35 /* Define to prevent recursive inclusion -------------------------------------*/ 36 #ifndef __STM32L4xx_HAL_CONF_H 37 #define __STM32L4xx_HAL_CONF_H 38 39 #ifdef __cplusplus 40 extern "C" { 41 #endif 42 43 #include "main.h" 44 /* Exported types ------------------------------------------------------------*/ 45 /* Exported constants --------------------------------------------------------*/ 46 47 /* ########################## Module Selection ############################## */ 48 /** 49 * @brief This is the list of modules to be used in the HAL driver 50 */ 51 52 #define HAL_MODULE_ENABLED 53 /*#define HAL_ADC_MODULE_ENABLED */ 54 /*#define HAL_CRYP_MODULE_ENABLED */ 55 /*#define HAL_CAN_MODULE_ENABLED */ 56 /*#define HAL_COMP_MODULE_ENABLED */ 57 /*#define HAL_CRC_MODULE_ENABLED */ 58 /*#define HAL_CRYP_MODULE_ENABLED */ 59 /*#define HAL_DAC_MODULE_ENABLED */ 60 /*#define HAL_DCMI_MODULE_ENABLED */ 61 /*#define HAL_DMA2D_MODULE_ENABLED */ 62 /*#define HAL_DFSDM_MODULE_ENABLED */ 63 /*#define HAL_DSI_MODULE_ENABLED */ 64 /*#define HAL_FIREWALL_MODULE_ENABLED */ 65 /*#define HAL_GFXMMU_MODULE_ENABLED */ 66 /*#define HAL_HCD_MODULE_ENABLED */ 67 /*#define HAL_HASH_MODULE_ENABLED */ 68 /*#define HAL_I2S_MODULE_ENABLED */ 69 /*#define HAL_IRDA_MODULE_ENABLED */ 70 /*#define HAL_IWDG_MODULE_ENABLED */ 71 /*#define HAL_LTDC_MODULE_ENABLED */ 72 /*#define HAL_LCD_MODULE_ENABLED */ 73 /*#define HAL_LPTIM_MODULE_ENABLED */ 74 /*#define HAL_NAND_MODULE_ENABLED */ 75 /*#define HAL_NOR_MODULE_ENABLED */ 76 /*#define HAL_OPAMP_MODULE_ENABLED */ 77 /*#define HAL_OSPI_MODULE_ENABLED */ 78 /*#define HAL_OSPI_MODULE_ENABLED */ 79 #define HAL_PCD_MODULE_ENABLED 80 /*#define HAL_QSPI_MODULE_ENABLED */ 81 /*#define HAL_QSPI_MODULE_ENABLED */ 82 #define HAL_RNG_MODULE_ENABLED 83 #define HAL_RTC_MODULE_ENABLED 84 /*#define HAL_SAI_MODULE_ENABLED */ 85 /*#define HAL_SD_MODULE_ENABLED */ 86 /*#define HAL_SMBUS_MODULE_ENABLED */ 87 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 88 /*#define HAL_SPI_MODULE_ENABLED */ 89 /*#define HAL_SRAM_MODULE_ENABLED */ 90 /*#define HAL_SWPMI_MODULE_ENABLED */ 91 /*#define HAL_TIM_MODULE_ENABLED */ 92 /*#define HAL_TSC_MODULE_ENABLED */ 93 #define HAL_UART_MODULE_ENABLED 94 /*#define HAL_USART_MODULE_ENABLED */ 95 /*#define HAL_WWDG_MODULE_ENABLED */ 96 #define HAL_GPIO_MODULE_ENABLED 97 #define HAL_I2C_MODULE_ENABLED 98 #define HAL_DMA_MODULE_ENABLED 99 #define HAL_RCC_MODULE_ENABLED 100 #define HAL_FLASH_MODULE_ENABLED 101 #define HAL_PWR_MODULE_ENABLED 102 #define HAL_CORTEX_MODULE_ENABLED 103 104 /* ########################## Oscillator Values adaptation ####################*/ 105 /** 106 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 107 * This value is used by the RCC HAL module to compute the system frequency 108 * (when HSE is used as system clock source, directly or through the PLL). 109 */ 110 #if !defined (HSE_VALUE) 111 #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ 112 #endif /* HSE_VALUE */ 113 114 #if !defined (HSE_STARTUP_TIMEOUT) 115 #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ 116 #endif /* HSE_STARTUP_TIMEOUT */ 117 118 /** 119 * @brief Internal Multiple Speed oscillator (MSI) default value. 120 * This value is the default MSI range value after Reset. 121 */ 122 #if !defined (MSI_VALUE) 123 #define MSI_VALUE ((uint32_t)48000000U) /*!< Value of the Internal oscillator in Hz*/ 124 #endif /* MSI_VALUE */ 125 /** 126 * @brief Internal High Speed oscillator (HSI) value. 127 * This value is used by the RCC HAL module to compute the system frequency 128 * (when HSI is used as system clock source, directly or through the PLL). 129 */ 130 #if !defined (HSI_VALUE) 131 #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ 132 #endif /* HSI_VALUE */ 133 134 /** 135 * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. 136 * This internal oscillator is mainly dedicated to provide a high precision clock to 137 * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. 138 * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency 139 * which is subject to manufacturing process variations. 140 */ 141 #if !defined (HSI48_VALUE) 142 #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. 143 The real value my vary depending on manufacturing process variations.*/ 144 #endif /* HSI48_VALUE */ 145 146 /** 147 * @brief Internal Low Speed oscillator (LSI) value. 148 */ 149 #if !defined (LSI_VALUE) 150 #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ 151 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 152 The real value may vary depending on the variations 153 in voltage and temperature.*/ 154 155 /** 156 * @brief External Low Speed oscillator (LSE) value. 157 * This value is used by the UART, RTC HAL module to compute the system frequency 158 */ 159 #if !defined (LSE_VALUE) 160 #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ 161 #endif /* LSE_VALUE */ 162 163 #if !defined (LSE_STARTUP_TIMEOUT) 164 #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ 165 #endif /* HSE_STARTUP_TIMEOUT */ 166 167 /** 168 * @brief External clock source for SAI1 peripheral 169 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 170 * frequency. 171 */ 172 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 173 #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI1 External clock source in Hz*/ 174 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 175 176 /** 177 * @brief External clock source for SAI2 peripheral 178 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 179 * frequency. 180 */ 181 #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) 182 #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)2097000U) /*!< Value of the SAI2 External clock source in Hz*/ 183 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */ 184 185 /* Tip: To avoid modifying this file each time you need to use different HSE, 186 === you can define the HSE value in your toolchain compiler preprocessor. */ 187 188 /* ########################### System Configuration ######################### */ 189 /** 190 * @brief This is the HAL system configuration section 191 */ 192 193 #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ 194 #define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ 195 #define USE_RTOS 0U 196 #define PREFETCH_ENABLE 1U 197 #define INSTRUCTION_CACHE_ENABLE 1U 198 #define DATA_CACHE_ENABLE 1U 199 200 /* ########################## Assert Selection ############################## */ 201 /** 202 * @brief Uncomment the line below to expanse the "assert_param" macro in the 203 * HAL drivers code 204 */ 205 /* #define USE_FULL_ASSERT 1U */ 206 207 /* ################## SPI peripheral configuration ########################## */ 208 209 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 210 * Activated: CRC code is present inside driver 211 * Deactivated: CRC code cleaned from driver 212 */ 213 214 #define USE_SPI_CRC 0U 215 216 /* Includes ------------------------------------------------------------------*/ 217 /** 218 * @brief Include module's header file 219 */ 220 221 #ifdef HAL_RCC_MODULE_ENABLED 222 #include "stm32l4xx_hal_rcc.h" 223 #include "stm32l4xx_hal_rcc_ex.h" 224 #endif /* HAL_RCC_MODULE_ENABLED */ 225 226 #ifdef HAL_GPIO_MODULE_ENABLED 227 #include "stm32l4xx_hal_gpio.h" 228 #endif /* HAL_GPIO_MODULE_ENABLED */ 229 230 #ifdef HAL_DMA_MODULE_ENABLED 231 #include "stm32l4xx_hal_dma.h" 232 #include "stm32l4xx_hal_dma_ex.h" 233 #endif /* HAL_DMA_MODULE_ENABLED */ 234 235 #ifdef HAL_DFSDM_MODULE_ENABLED 236 #include "stm32l4xx_hal_dfsdm.h" 237 #endif /* HAL_DFSDM_MODULE_ENABLED */ 238 239 #ifdef HAL_CORTEX_MODULE_ENABLED 240 #include "stm32l4xx_hal_cortex.h" 241 #endif /* HAL_CORTEX_MODULE_ENABLED */ 242 243 #ifdef HAL_ADC_MODULE_ENABLED 244 #include "stm32l4xx_hal_adc.h" 245 #endif /* HAL_ADC_MODULE_ENABLED */ 246 247 #ifdef HAL_CAN_MODULE_ENABLED 248 #include "stm32l4xx_hal_can.h" 249 #endif /* HAL_CAN_MODULE_ENABLED */ 250 251 #ifdef HAL_COMP_MODULE_ENABLED 252 #include "stm32l4xx_hal_comp.h" 253 #endif /* HAL_COMP_MODULE_ENABLED */ 254 255 #ifdef HAL_CRC_MODULE_ENABLED 256 #include "stm32l4xx_hal_crc.h" 257 #endif /* HAL_CRC_MODULE_ENABLED */ 258 259 #ifdef HAL_CRYP_MODULE_ENABLED 260 #include "stm32l4xx_hal_cryp.h" 261 #endif /* HAL_CRYP_MODULE_ENABLED */ 262 263 #ifdef HAL_DAC_MODULE_ENABLED 264 #include "stm32l4xx_hal_dac.h" 265 #endif /* HAL_DAC_MODULE_ENABLED */ 266 267 #ifdef HAL_DCMI_MODULE_ENABLED 268 #include "stm32l4xx_hal_dcmi.h" 269 #endif /* HAL_DCMI_MODULE_ENABLED */ 270 271 #ifdef HAL_DMA2D_MODULE_ENABLED 272 #include "stm32l4xx_hal_dma2d.h" 273 #endif /* HAL_DMA2D_MODULE_ENABLED */ 274 275 #ifdef HAL_DSI_MODULE_ENABLED 276 #include "stm32l4xx_hal_dsi.h" 277 #endif /* HAL_DSI_MODULE_ENABLED */ 278 279 #ifdef HAL_FIREWALL_MODULE_ENABLED 280 #include "stm32l4xx_hal_firewall.h" 281 #endif /* HAL_FIREWALL_MODULE_ENABLED */ 282 283 #ifdef HAL_FLASH_MODULE_ENABLED 284 #include "stm32l4xx_hal_flash.h" 285 #endif /* HAL_FLASH_MODULE_ENABLED */ 286 287 #ifdef HAL_HASH_MODULE_ENABLED 288 #include "stm32l4xx_hal_hash.h" 289 #endif /* HAL_HASH_MODULE_ENABLED */ 290 291 #ifdef HAL_SRAM_MODULE_ENABLED 292 #include "stm32l4xx_hal_sram.h" 293 #endif /* HAL_SRAM_MODULE_ENABLED */ 294 295 #ifdef HAL_NOR_MODULE_ENABLED 296 #include "stm32l4xx_hal_nor.h" 297 #endif /* HAL_NOR_MODULE_ENABLED */ 298 299 #ifdef HAL_NAND_MODULE_ENABLED 300 #include "stm32l4xx_hal_nand.h" 301 #endif /* HAL_NAND_MODULE_ENABLED */ 302 303 #ifdef HAL_I2C_MODULE_ENABLED 304 #include "stm32l4xx_hal_i2c.h" 305 #endif /* HAL_I2C_MODULE_ENABLED */ 306 307 #ifdef HAL_IWDG_MODULE_ENABLED 308 #include "stm32l4xx_hal_iwdg.h" 309 #endif /* HAL_IWDG_MODULE_ENABLED */ 310 311 #ifdef HAL_LCD_MODULE_ENABLED 312 #include "stm32l4xx_hal_lcd.h" 313 #endif /* HAL_LCD_MODULE_ENABLED */ 314 315 #ifdef HAL_LPTIM_MODULE_ENABLED 316 #include "stm32l4xx_hal_lptim.h" 317 #endif /* HAL_LPTIM_MODULE_ENABLED */ 318 319 #ifdef HAL_LTDC_MODULE_ENABLED 320 #include "stm32l4xx_hal_ltdc.h" 321 #endif /* HAL_LTDC_MODULE_ENABLED */ 322 323 #ifdef HAL_OPAMP_MODULE_ENABLED 324 #include "stm32l4xx_hal_opamp.h" 325 #endif /* HAL_OPAMP_MODULE_ENABLED */ 326 327 #ifdef HAL_OSPI_MODULE_ENABLED 328 #include "stm32l4xx_hal_ospi.h" 329 #endif /* HAL_OSPI_MODULE_ENABLED */ 330 331 #ifdef HAL_PWR_MODULE_ENABLED 332 #include "stm32l4xx_hal_pwr.h" 333 #endif /* HAL_PWR_MODULE_ENABLED */ 334 335 #ifdef HAL_QSPI_MODULE_ENABLED 336 #include "stm32l4xx_hal_qspi.h" 337 #endif /* HAL_QSPI_MODULE_ENABLED */ 338 339 #ifdef HAL_RNG_MODULE_ENABLED 340 #include "stm32l4xx_hal_rng.h" 341 #endif /* HAL_RNG_MODULE_ENABLED */ 342 343 #ifdef HAL_RTC_MODULE_ENABLED 344 #include "stm32l4xx_hal_rtc.h" 345 #endif /* HAL_RTC_MODULE_ENABLED */ 346 347 #ifdef HAL_SAI_MODULE_ENABLED 348 #include "stm32l4xx_hal_sai.h" 349 #endif /* HAL_SAI_MODULE_ENABLED */ 350 351 #ifdef HAL_SD_MODULE_ENABLED 352 #include "stm32l4xx_hal_sd.h" 353 #endif /* HAL_SD_MODULE_ENABLED */ 354 355 #ifdef HAL_SMBUS_MODULE_ENABLED 356 #include "stm32l4xx_hal_smbus.h" 357 #endif /* HAL_SMBUS_MODULE_ENABLED */ 358 359 #ifdef HAL_SPI_MODULE_ENABLED 360 #include "stm32l4xx_hal_spi.h" 361 #endif /* HAL_SPI_MODULE_ENABLED */ 362 363 #ifdef HAL_SWPMI_MODULE_ENABLED 364 #include "stm32l4xx_hal_swpmi.h" 365 #endif /* HAL_SWPMI_MODULE_ENABLED */ 366 367 #ifdef HAL_TIM_MODULE_ENABLED 368 #include "stm32l4xx_hal_tim.h" 369 #endif /* HAL_TIM_MODULE_ENABLED */ 370 371 #ifdef HAL_TSC_MODULE_ENABLED 372 #include "stm32l4xx_hal_tsc.h" 373 #endif /* HAL_TSC_MODULE_ENABLED */ 374 375 #ifdef HAL_UART_MODULE_ENABLED 376 #include "stm32l4xx_hal_uart.h" 377 #endif /* HAL_UART_MODULE_ENABLED */ 378 379 #ifdef HAL_USART_MODULE_ENABLED 380 #include "stm32l4xx_hal_usart.h" 381 #endif /* HAL_USART_MODULE_ENABLED */ 382 383 #ifdef HAL_IRDA_MODULE_ENABLED 384 #include "stm32l4xx_hal_irda.h" 385 #endif /* HAL_IRDA_MODULE_ENABLED */ 386 387 #ifdef HAL_SMARTCARD_MODULE_ENABLED 388 #include "stm32l4xx_hal_smartcard.h" 389 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 390 391 #ifdef HAL_WWDG_MODULE_ENABLED 392 #include "stm32l4xx_hal_wwdg.h" 393 #endif /* HAL_WWDG_MODULE_ENABLED */ 394 395 #ifdef HAL_PCD_MODULE_ENABLED 396 #include "stm32l4xx_hal_pcd.h" 397 #endif /* HAL_PCD_MODULE_ENABLED */ 398 399 #ifdef HAL_HCD_MODULE_ENABLED 400 #include "stm32l4xx_hal_hcd.h" 401 #endif /* HAL_HCD_MODULE_ENABLED */ 402 403 #ifdef HAL_GFXMMU_MODULE_ENABLED 404 #include "stm32l4xx_hal_gfxmmu.h" 405 #endif /* HAL_GFXMMU_MODULE_ENABLED */ 406 407 /* Exported macro ------------------------------------------------------------*/ 408 #ifdef USE_FULL_ASSERT 409 /** 410 * @brief The assert_param macro is used for function's parameters check. 411 * @param expr: If expr is false, it calls assert_failed function 412 * which reports the name of the source file and the source 413 * line number of the call that failed. 414 * If expr is true, it returns no value. 415 * @retval None 416 */ 417 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 418 /* Exported functions ------------------------------------------------------- */ 419 void assert_failed(uint8_t* file, uint32_t line); 420 #else 421 #define assert_param(expr) ((void)0U) 422 #endif /* USE_FULL_ASSERT */ 423 424 #ifdef __cplusplus 425 } 426 #endif 427 428 #endif /* __STM32L4xx_HAL_CONF_H */ 429 430 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 431