valid: The DTD validation

Details

Macro XML_VCTXT_DTD_VALIDATED

#define XML_VCTXT_DTD_VALIDATED;

Set after xmlValidateDtdFinal was called.

Macro XML_VCTXT_USE_PCTXT

#define XML_VCTXT_USE_PCTXT;

Set if the validation context is part of a parser context.

Structure xmlAttributeTable

struct _xmlHashTable {
The content of this structure is not made public by the API.
} xmlAttributeTable;

Typedef xmlAttributeTablePtr

xmlAttributeTable * xmlAttributeTablePtr;

Structure xmlElementTable

struct _xmlHashTable {
The content of this structure is not made public by the API.
} xmlElementTable;

Typedef xmlElementTablePtr

xmlElementTable * xmlElementTablePtr;

Structure xmlIDTable

struct _xmlHashTable {
The content of this structure is not made public by the API.
} xmlIDTable;

Typedef xmlIDTablePtr

xmlIDTable * xmlIDTablePtr;

Structure xmlNotationTable

struct _xmlHashTable {
The content of this structure is not made public by the API.
} xmlNotationTable;

Typedef xmlNotationTablePtr

xmlNotationTable * xmlNotationTablePtr;

Structure xmlRefTable

struct _xmlHashTable {
The content of this structure is not made public by the API.
} xmlRefTable;

Typedef xmlRefTablePtr

xmlRefTable * xmlRefTablePtr;

Structure xmlValidCtxt

struct _xmlValidCtxt {
    void *	userData	: user specific data block
    xmlValidityErrorFunc	error	: the callback in case of errors
    xmlValidityWarningFunc	warning	: the callback in case of warning Node analysis stack used when validat
    xmlNodePtr	node	: Current parsed Node
    int	nodeNr	: Depth of the parsing stack
    int	nodeMax	: Max depth of the parsing stack
    xmlNodePtr *	nodeTab	: array of nodes
    unsigned int	flags	: internal flags
    xmlDocPtr	doc	: the document
    int	valid	: temporary validity check result state state used for non-determinist
    xmlValidState *	vstate	: current state
    int	vstateNr	: Depth of the validation stack
    int	vstateMax	: Max depth of the validation stack
    xmlValidState *	vstateTab	: array of validation states
    xmlAutomataPtr	am	: the automata
    xmlAutomataStatePtr	state	: used to build the automata
    void *	am
    void *	state
} xmlValidCtxt;

Typedef xmlValidCtxtPtr

xmlValidCtxt * xmlValidCtxtPtr;

Structure xmlValidState

struct _xmlValidState {
The content of this structure is not made public by the API.
} xmlValidState;

Typedef xmlValidStatePtr

xmlValidState * xmlValidStatePtr;

Function type xmlValidityErrorFunc

void	xmlValidityErrorFunc		(void * ctx, 
					 const char * msg, 
					 ... ...)

Callback called when a validity error is found. This is a message oriented function similar to an *printf function.

`ctx`:	usually an xmlValidCtxtPtr to a validity error context, but comes from ctxt->userData (which normally contains such a pointer); ctxt->userData can be changed by the user.
`msg`:	the string to format *printf like vararg
`...`:	remaining arguments to the format

Function type xmlValidityWarningFunc

void	xmlValidityWarningFunc		(void * ctx, 
					 const char * msg, 
					 ... ...)

Callback called when a validity warning is found. This is a message oriented function similar to an *printf function.

`ctx`:	usually an xmlValidCtxtPtr to a validity error context, but comes from ctxt->userData (which normally contains such a pointer); ctxt->userData can be changed by the user.
`msg`:	the string to format *printf like vararg
`...`:	remaining arguments to the format

xmlAddAttributeDecl ()

xmlAttributePtr	xmlAddAttributeDecl	(xmlValidCtxtPtr ctxt, 
					 xmlDtdPtr dtd, 
					 const xmlChar * elem, 
					 const xmlChar * name, 
					 const xmlChar * ns, 
					 xmlAttributeType type, 
					 xmlAttributeDefault def, 
					 const xmlChar * defaultValue, 
					 xmlEnumerationPtr tree)

`ctxt`:	the validation context
`dtd`:	pointer to the DTD
`elem`:	the element name
`name`:	the attribute name
`ns`:	the attribute namespace prefix
`type`:	the attribute type
`def`:	the attribute default type
`defaultValue`:	the attribute default value
`tree`:	if it's an enumeration, the associated list
`Returns`:	NULL if not new, otherwise the attribute decl

xmlAddElementDecl ()

xmlElementPtr	xmlAddElementDecl	(xmlValidCtxtPtr ctxt, 
					 xmlDtdPtr dtd, 
					 const xmlChar * name, 
					 xmlElementTypeVal type, 
					 xmlElementContentPtr content)

`ctxt`:	the validation context
`dtd`:	pointer to the DTD
`name`:	the entity name
`type`:	the element type
`content`:	the element content tree or NULL
`Returns`:	NULL if not, otherwise the entity

xmlAddID ()

xmlIDPtr	xmlAddID		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 const xmlChar * value, 
					 xmlAttrPtr attr)

`ctxt`:	the validation context
`doc`:	pointer to the document
`value`:	the value name
`attr`:	the attribute holding the ID
`Returns`:	NULL if not, otherwise the new xmlIDPtr

xmlAddNotationDecl ()

xmlNotationPtr	xmlAddNotationDecl	(xmlValidCtxtPtr ctxt, 
					 xmlDtdPtr dtd, 
					 const xmlChar * name, 
					 const xmlChar * PublicID, 
					 const xmlChar * SystemID)

`ctxt`:	the validation context
`dtd`:	pointer to the DTD
`name`:	the entity name
`PublicID`:	the public identifier or NULL
`SystemID`:	the system identifier or NULL
`Returns`:	NULL if not, otherwise the entity

xmlAddRef ()

xmlRefPtr	xmlAddRef		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 const xmlChar * value, 
					 xmlAttrPtr attr)

DEPRECATED, do not use. This function will be removed from the public API. Register a new ref declaration

`ctxt`:	the validation context
`doc`:	pointer to the document
`value`:	the value name
`attr`:	the attribute holding the Ref
`Returns`:	NULL if not, otherwise the new xmlRefPtr

xmlCopyAttributeTable ()

xmlAttributeTablePtr	xmlCopyAttributeTable	(xmlAttributeTablePtr table)

Build a copy of an attribute table.

`table`:	An attribute table
`Returns`:	the new xmlAttributeTablePtr or NULL in case of error.

xmlCopyDocElementContent ()

xmlElementContentPtr	xmlCopyDocElementContent	(xmlDocPtr doc, 
							 xmlElementContentPtr cur)

Build a copy of an element content description.

`doc`:	the document owning the element declaration
`cur`:	An element content pointer.
`Returns`:	the new xmlElementContentPtr or NULL in case of error.

xmlCopyElementContent ()

xmlElementContentPtr	xmlCopyElementContent	(xmlElementContentPtr cur)

Build a copy of an element content description. Deprecated, use xmlCopyDocElementContent instead

`cur`:	An element content pointer.
`Returns`:	the new xmlElementContentPtr or NULL in case of error.

xmlCopyElementTable ()

xmlElementTablePtr	xmlCopyElementTable	(xmlElementTablePtr table)

Build a copy of an element table.

`table`:	An element table
`Returns`:	the new xmlElementTablePtr or NULL in case of error.

xmlCopyEnumeration ()

xmlEnumerationPtr	xmlCopyEnumeration	(xmlEnumerationPtr cur)

Copy an enumeration attribute node (recursive).

`cur`:	the tree to copy.
`Returns`:	the xmlEnumerationPtr just created or NULL in case of error.

xmlCopyNotationTable ()

xmlNotationTablePtr	xmlCopyNotationTable	(xmlNotationTablePtr table)

Build a copy of a notation table.

`table`:	A notation table
`Returns`:	the new xmlNotationTablePtr or NULL in case of error.

xmlCreateEnumeration ()

xmlEnumerationPtr	xmlCreateEnumeration	(const xmlChar * name)

create and initialize an enumeration attribute node.

`name`:	the enumeration name or NULL
`Returns`:	the xmlEnumerationPtr just created or NULL in case of error.

xmlDumpAttributeDecl ()

void	xmlDumpAttributeDecl		(xmlBufferPtr buf, 
					 xmlAttributePtr attr)

This will dump the content of the attribute declaration as an XML DTD definition

`buf`:	the XML buffer output
`attr`:	An attribute declaration

xmlDumpAttributeTable ()

void	xmlDumpAttributeTable		(xmlBufferPtr buf, 
					 xmlAttributeTablePtr table)

This will dump the content of the attribute table as an XML DTD definition

`buf`:	the XML buffer output
`table`:	An attribute table

xmlDumpElementDecl ()

void	xmlDumpElementDecl		(xmlBufferPtr buf, 
					 xmlElementPtr elem)

This will dump the content of the element declaration as an XML DTD definition

`buf`:	the XML buffer output
`elem`:	An element table

xmlDumpElementTable ()

void	xmlDumpElementTable		(xmlBufferPtr buf, 
					 xmlElementTablePtr table)

This will dump the content of the element table as an XML DTD definition

`buf`:	the XML buffer output
`table`:	An element table

xmlDumpNotationDecl ()

void	xmlDumpNotationDecl		(xmlBufferPtr buf, 
					 xmlNotationPtr nota)

This will dump the content the notation declaration as an XML DTD definition

`buf`:	the XML buffer output
`nota`:	A notation declaration

xmlDumpNotationTable ()

void	xmlDumpNotationTable		(xmlBufferPtr buf, 
					 xmlNotationTablePtr table)

This will dump the content of the notation table as an XML DTD definition

`buf`:	the XML buffer output
`table`:	A notation table

xmlFreeAttributeTable ()

void	xmlFreeAttributeTable		(xmlAttributeTablePtr table)

Deallocate the memory used by an entities hash table.

table: An attribute table

xmlFreeDocElementContent ()

void	xmlFreeDocElementContent	(xmlDocPtr doc, 
					 xmlElementContentPtr cur)

Free an element content structure. The whole subtree is removed.

`doc`:	the document owning the element declaration
`cur`:	the element content tree to free

xmlFreeElementContent ()

void	xmlFreeElementContent		(xmlElementContentPtr cur)

Free an element content structure. The whole subtree is removed. Deprecated, use xmlFreeDocElementContent instead

cur: the element content tree to free

xmlFreeElementTable ()

void	xmlFreeElementTable		(xmlElementTablePtr table)

Deallocate the memory used by an element hash table.

table: An element table

xmlFreeEnumeration ()

void	xmlFreeEnumeration		(xmlEnumerationPtr cur)

free an enumeration attribute node (recursive).

cur: the tree to free.

xmlFreeIDTable ()

void	xmlFreeIDTable			(xmlIDTablePtr table)

Deallocate the memory used by an ID hash table.

table: An id table

xmlFreeNotationTable ()

void	xmlFreeNotationTable		(xmlNotationTablePtr table)

Deallocate the memory used by an entities hash table.

table: An notation table

xmlFreeRefTable ()

void	xmlFreeRefTable			(xmlRefTablePtr table)

DEPRECATED, do not use. This function will be removed from the public API. Deallocate the memory used by an Ref hash table.

table: An ref table

xmlFreeValidCtxt ()

void	xmlFreeValidCtxt		(xmlValidCtxtPtr cur)

Free a validation context structure.

cur: the validation context to free

xmlGetDtdAttrDesc ()

xmlAttributePtr	xmlGetDtdAttrDesc	(xmlDtdPtr dtd, 
					 const xmlChar * elem, 
					 const xmlChar * name)

Search the DTD for the description of this attribute on this element.

`dtd`:	a pointer to the DtD to search
`elem`:	the element name
`name`:	the attribute name
`Returns`:	the xmlAttributePtr if found or NULL

xmlGetDtdElementDesc ()

xmlElementPtr	xmlGetDtdElementDesc	(xmlDtdPtr dtd, 
					 const xmlChar * name)

Search the DTD for the description of this element

`dtd`:	a pointer to the DtD to search
`name`:	the element name
`Returns`:	the xmlElementPtr if found or NULL

xmlGetDtdNotationDesc ()

xmlNotationPtr	xmlGetDtdNotationDesc	(xmlDtdPtr dtd, 
					 const xmlChar * name)

Search the DTD for the description of this notation

`dtd`:	a pointer to the DtD to search
`name`:	the notation name
`Returns`:	the xmlNotationPtr if found or NULL

xmlGetDtdQAttrDesc ()

xmlAttributePtr	xmlGetDtdQAttrDesc	(xmlDtdPtr dtd, 
					 const xmlChar * elem, 
					 const xmlChar * name, 
					 const xmlChar * prefix)

Search the DTD for the description of this qualified attribute on this element.

`dtd`:	a pointer to the DtD to search
`elem`:	the element name
`name`:	the attribute name
`prefix`:	the attribute namespace prefix
`Returns`:	the xmlAttributePtr if found or NULL

xmlGetDtdQElementDesc ()

xmlElementPtr	xmlGetDtdQElementDesc	(xmlDtdPtr dtd, 
					 const xmlChar * name, 
					 const xmlChar * prefix)

Search the DTD for the description of this element

`dtd`:	a pointer to the DtD to search
`name`:	the element name
`prefix`:	the element namespace prefix
`Returns`:	the xmlElementPtr if found or NULL

xmlGetID ()

xmlAttrPtr	xmlGetID		(xmlDocPtr doc, 
					 const xmlChar * ID)

Search the attribute declaring the given ID

`doc`:	pointer to the document
`ID`:	the ID value
`Returns`:	NULL if not found, otherwise the xmlAttrPtr defining the ID

xmlGetRefs ()

xmlListPtr	xmlGetRefs		(xmlDocPtr doc, 
					 const xmlChar * ID)

DEPRECATED, do not use. This function will be removed from the public API. Find the set of references for the supplied ID.

`doc`:	pointer to the document
`ID`:	the ID value
`Returns`:	NULL if not found, otherwise node set for the ID.

xmlIsID ()

int	xmlIsID			(xmlDocPtr doc, 
					 xmlNodePtr elem, 
					 xmlAttrPtr attr)

Determine whether an attribute is of type ID. In case we have DTD(s) then this is done if DTD loading has been requested. In the case of HTML documents parsed with the HTML parser, then ID detection is done systematically.

`doc`:	the document
`elem`:	the element carrying the attribute
`attr`:	the attribute
`Returns`:	0 or 1 depending on the lookup result

xmlIsMixedElement ()

int	xmlIsMixedElement		(xmlDocPtr doc, 
					 const xmlChar * name)

Search in the DtDs whether an element accept Mixed content (or ANY) basically if it is supposed to accept text childs

`doc`:	the document
`name`:	the element name
`Returns`:	0 if no, 1 if yes, and -1 if no element description is available

xmlIsRef ()

int	xmlIsRef			(xmlDocPtr doc, 
					 xmlNodePtr elem, 
					 xmlAttrPtr attr)

DEPRECATED, do not use. This function will be removed from the public API. Determine whether an attribute is of type Ref. In case we have DTD(s) then this is simple, otherwise we use an heuristic: name Ref (upper or lowercase).

`doc`:	the document
`elem`:	the element carrying the attribute
`attr`:	the attribute
`Returns`:	0 or 1 depending on the lookup result

xmlNewDocElementContent ()

xmlElementContentPtr	xmlNewDocElementContent	(xmlDocPtr doc, 
						 const xmlChar * name, 
						 xmlElementContentType type)

Allocate an element content structure for the document.

`doc`:	the document
`name`:	the subelement name or NULL
`type`:	the type of element content decl
`Returns`:	NULL if not, otherwise the new element content structure

xmlNewElementContent ()

xmlElementContentPtr	xmlNewElementContent	(const xmlChar * name, 
						 xmlElementContentType type)

Allocate an element content structure. Deprecated in favor of xmlNewDocElementContent

`name`:	the subelement name or NULL
`type`:	the type of element content decl
`Returns`:	NULL if not, otherwise the new element content structure

xmlNewValidCtxt ()

xmlValidCtxtPtr	xmlNewValidCtxt		(void)

Allocate a validation context structure.

Returns: NULL if not, otherwise the new validation context structure

xmlRemoveID ()

int	xmlRemoveID			(xmlDocPtr doc, 
					 xmlAttrPtr attr)

Remove the given attribute from the ID table maintained internally.

`doc`:	the document
`attr`:	the attribute
`Returns`:	-1 if the lookup failed and 0 otherwise

xmlRemoveRef ()

int	xmlRemoveRef			(xmlDocPtr doc, 
					 xmlAttrPtr attr)

DEPRECATED, do not use. This function will be removed from the public API. Remove the given attribute from the Ref table maintained internally.

`doc`:	the document
`attr`:	the attribute
`Returns`:	-1 if the lookup failed and 0 otherwise

xmlSnprintfElementContent ()

void	xmlSnprintfElementContent	(char * buf, 
					 int size, 
					 xmlElementContentPtr content, 
					 int englob)

This will dump the content of the element content definition Intended just for the debug routine

`buf`:	an output buffer
`size`:	the buffer size
`content`:	An element table
`englob`:	1 if one must print the englobing parenthesis, 0 otherwise

xmlSprintfElementContent ()

void	xmlSprintfElementContent	(char * buf, 
					 xmlElementContentPtr content, 
					 int englob)

Deprecated, unsafe, use xmlSnprintfElementContent

`buf`:	an output buffer
`content`:	An element table
`englob`:	1 if one must print the englobing parenthesis, 0 otherwise

xmlValidBuildContentModel ()

int	xmlValidBuildContentModel	(xmlValidCtxtPtr ctxt, 
					 xmlElementPtr elem)

(Re)Build the automata associated to the content model of this element

`ctxt`:	a validation context
`elem`:	an element declaration node
`Returns`:	1 in case of success, 0 in case of error

xmlValidCtxtNormalizeAttributeValue ()

xmlChar *	xmlValidCtxtNormalizeAttributeValue	(xmlValidCtxtPtr ctxt, 
							 xmlDocPtr doc, 
							 xmlNodePtr elem, 
							 const xmlChar * name, 
							 const xmlChar * value)

Does the validation related extra step of the normalization of attribute values: If the declared value is not CDATA, then the XML processor must further process the normalized attribute value by discarding any leading and trailing space (#x20) characters, and by replacing sequences of space (#x20) characters by single space (#x20) character. Also check VC: Standalone Document Declaration in P32, and update ctxt->valid accordingly

`ctxt`:	the validation context or NULL
`doc`:	the document
`elem`:	the parent
`name`:	the attribute name
`value`:	the attribute value
`Returns`:	a new normalized string if normalization is needed, NULL otherwise the caller must free the returned value.

xmlValidGetPotentialChildren ()

int	xmlValidGetPotentialChildren	(xmlElementContent * ctree, 
					 const xmlChar ** names, 
					 int * len, 
					 int max)

Build/extend a list of potential children allowed by the content tree

`ctree`:	an element content tree
`names`:	an array to store the list of child names
`len`:	a pointer to the number of element in the list
`max`:	the size of the array
`Returns`:	the number of element in the list, or -1 in case of error.

xmlValidGetValidElements ()

int	xmlValidGetValidElements	(xmlNode * prev, 
					 xmlNode * next, 
					 const xmlChar ** names, 
					 int max)

This function returns the list of authorized children to insert within an existing tree while respecting the validity constraints forced by the Dtd. The insertion point is defined using @prev and @next in the following ways: to insert before 'node': xmlValidGetValidElements(node->prev, node, ... to insert next 'node': xmlValidGetValidElements(node, node->next, ... to replace 'node': xmlValidGetValidElements(node->prev, node->next, ... to prepend a child to 'node': xmlValidGetValidElements(NULL, node->childs, to append a child to 'node': xmlValidGetValidElements(node->last, NULL, ... pointers to the element names are inserted at the beginning of the array and do not need to be freed.

`prev`:	an element to insert after
`next`:	an element to insert next
`names`:	an array to store the list of child names
`max`:	the size of the array
`Returns`:	the number of element in the list, or -1 in case of error. If the function returns the value @max the caller is invited to grow the receiving array and retry.

xmlValidNormalizeAttributeValue ()

xmlChar *	xmlValidNormalizeAttributeValue	(xmlDocPtr doc, 
						 xmlNodePtr elem, 
						 const xmlChar * name, 
						 const xmlChar * value)

`doc`:	the document
`elem`:	the parent
`name`:	the attribute name
`value`:	the attribute value
`Returns`:	a new normalized string if normalization is needed, NULL otherwise the caller must free the returned value.

xmlValidateAttributeDecl ()

int	xmlValidateAttributeDecl	(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlAttributePtr attr)

Try to validate a single attribute definition basically it does the following checks as described by the XML-1.0 recommendation: - [ VC: Attribute Default Legal ] - [ VC: Enumeration ] - [ VC: ID Attribute Default ] The ID/IDREF uniqueness and matching are done separately

`ctxt`:	the validation context
`doc`:	a document instance
`attr`:	an attribute definition
`Returns`:	1 if valid or 0 otherwise

xmlValidateAttributeValue ()

int	xmlValidateAttributeValue	(xmlAttributeType type, 
					 const xmlChar * value)

Validate that the given attribute value match the proper production [ VC: ID ] Values of type ID must match the Name production.... [ VC: IDREF ] Values of type IDREF must match the Name production, and values of type IDREFS must match Names ... [ VC: Entity Name ] Values of type ENTITY must match the Name production, values of type ENTITIES must match Names ... [ VC: Name Token ] Values of type NMTOKEN must match the Nmtoken production; values of type NMTOKENS must match Nmtokens.

`type`:	an attribute type
`value`:	an attribute value
`Returns`:	1 if valid or 0 otherwise

xmlValidateDocument ()

int	xmlValidateDocument		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc)

Try to validate the document instance basically it does the all the checks described by the XML Rec i.e. validates the internal and external subset (if present) and validate the document tree.

`ctxt`:	the validation context
`doc`:	a document instance
`Returns`:	1 if valid or 0 otherwise

xmlValidateDocumentFinal ()

int	xmlValidateDocumentFinal	(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc)

Does the final step for the document validation once all the incremental validation steps have been completed basically it does the following checks described by the XML Rec Check all the IDREF/IDREFS attributes definition for validity

`ctxt`:	the validation context
`doc`:	a document instance
`Returns`:	1 if valid or 0 otherwise

xmlValidateDtd ()

int	xmlValidateDtd			(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlDtdPtr dtd)

Try to validate the document against the dtd instance Basically it does check all the definitions in the DtD. Note the the internal subset (if present) is de-coupled (i.e. not used), which could give problems if ID or IDREF is present.

`ctxt`:	the validation context
`doc`:	a document instance
`dtd`:	a dtd instance
`Returns`:	1 if valid or 0 otherwise

xmlValidateDtdFinal ()

int	xmlValidateDtdFinal		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc)

Does the final step for the dtds validation once all the subsets have been parsed basically it does the following checks described by the XML Rec - check that ENTITY and ENTITIES type attributes default or possible values matches one of the defined entities. - check that NOTATION type attributes default or possible values matches one of the defined notations.

`ctxt`:	the validation context
`doc`:	a document instance
`Returns`:	1 if valid or 0 if invalid and -1 if not well-formed

xmlValidateElement ()

int	xmlValidateElement		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlNodePtr elem)

Try to validate the subtree under an element

`ctxt`:	the validation context
`doc`:	a document instance
`elem`:	an element instance
`Returns`:	1 if valid or 0 otherwise

xmlValidateElementDecl ()

int	xmlValidateElementDecl		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlElementPtr elem)

Try to validate a single element definition basically it does the following checks as described by the XML-1.0 recommendation: - [ VC: One ID per Element Type ] - [ VC: No Duplicate Types ] - [ VC: Unique Element Type Declaration ]

`ctxt`:	the validation context
`doc`:	a document instance
`elem`:	an element definition
`Returns`:	1 if valid or 0 otherwise

xmlValidateNameValue ()

int	xmlValidateNameValue		(const xmlChar * value)

Validate that the given value match Name production

`value`:	an Name value
`Returns`:	1 if valid or 0 otherwise

xmlValidateNamesValue ()

int	xmlValidateNamesValue		(const xmlChar * value)

Validate that the given value match Names production

`value`:	an Names value
`Returns`:	1 if valid or 0 otherwise

xmlValidateNmtokenValue ()

int	xmlValidateNmtokenValue		(const xmlChar * value)

Validate that the given value match Nmtoken production [ VC: Name Token ]

`value`:	an Nmtoken value
`Returns`:	1 if valid or 0 otherwise

xmlValidateNmtokensValue ()

int	xmlValidateNmtokensValue	(const xmlChar * value)

Validate that the given value match Nmtokens production [ VC: Name Token ]

`value`:	an Nmtokens value
`Returns`:	1 if valid or 0 otherwise

xmlValidateNotationDecl ()

int	xmlValidateNotationDecl		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlNotationPtr nota)

Try to validate a single notation definition basically it does the following checks as described by the XML-1.0 recommendation: - it seems that no validity constraint exists on notation declarations But this function get called anyway ...

`ctxt`:	the validation context
`doc`:	a document instance
`nota`:	a notation definition
`Returns`:	1 if valid or 0 otherwise

xmlValidateNotationUse ()

int	xmlValidateNotationUse		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 const xmlChar * notationName)

Validate that the given name match a notation declaration. - [ VC: Notation Declared ]

`ctxt`:	the validation context
`doc`:	the document
`notationName`:	the notation name to check
`Returns`:	1 if valid or 0 otherwise

xmlValidateOneAttribute ()

int	xmlValidateOneAttribute		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlNodePtr elem, 
					 xmlAttrPtr attr, 
					 const xmlChar * value)

Try to validate a single attribute for an element basically it does the following checks as described by the XML-1.0 recommendation: - [ VC: Attribute Value Type ] - [ VC: Fixed Attribute Default ] - [ VC: Entity Name ] - [ VC: Name Token ] - [ VC: ID ] - [ VC: IDREF ] - [ VC: Entity Name ] - [ VC: Notation Attributes ] The ID/IDREF uniqueness and matching are done separately

`ctxt`:	the validation context
`doc`:	a document instance
`elem`:	an element instance
`attr`:	an attribute instance
`value`:	the attribute value (without entities processing)
`Returns`:	1 if valid or 0 otherwise

xmlValidateOneElement ()

int	xmlValidateOneElement		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlNodePtr elem)

Try to validate a single element and it's attributes, basically it does the following checks as described by the XML-1.0 recommendation: - [ VC: Element Valid ] - [ VC: Required Attribute ] Then call xmlValidateOneAttribute() for each attribute present. The ID/IDREF checkings are done separately

`ctxt`:	the validation context
`doc`:	a document instance
`elem`:	an element instance
`Returns`:	1 if valid or 0 otherwise

xmlValidateOneNamespace ()

int	xmlValidateOneNamespace		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlNodePtr elem, 
					 const xmlChar * prefix, 
					 xmlNsPtr ns, 
					 const xmlChar * value)

Try to validate a single namespace declaration for an element basically it does the following checks as described by the XML-1.0 recommendation: - [ VC: Attribute Value Type ] - [ VC: Fixed Attribute Default ] - [ VC: Entity Name ] - [ VC: Name Token ] - [ VC: ID ] - [ VC: IDREF ] - [ VC: Entity Name ] - [ VC: Notation Attributes ] The ID/IDREF uniqueness and matching are done separately

`ctxt`:	the validation context
`doc`:	a document instance
`elem`:	an element instance
`prefix`:	the namespace prefix
`ns`:	an namespace declaration instance
`value`:	the attribute value (without entities processing)
`Returns`:	1 if valid or 0 otherwise

xmlValidatePopElement ()

int	xmlValidatePopElement		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlNodePtr elem, 
					 const xmlChar * qname)

Pop the element end from the validation stack.

`ctxt`:	the validation context
`doc`:	a document instance
`elem`:	an element instance
`qname`:	the qualified name as appearing in the serialization
`Returns`:	1 if no validation problem was found or 0 otherwise

xmlValidatePushCData ()

int	xmlValidatePushCData		(xmlValidCtxtPtr ctxt, 
					 const xmlChar * data, 
					 int len)

check the CData parsed for validation in the current stack

`ctxt`:	the validation context
`data`:	some character data read
`len`:	the length of the data
`Returns`:	1 if no validation problem was found or 0 otherwise

xmlValidatePushElement ()

int	xmlValidatePushElement		(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc, 
					 xmlNodePtr elem, 
					 const xmlChar * qname)

Push a new element start on the validation stack.

`ctxt`:	the validation context
`doc`:	a document instance
`elem`:	an element instance
`qname`:	the qualified name as appearing in the serialization
`Returns`:	1 if no validation problem was found or 0 otherwise

xmlValidateRoot ()

int	xmlValidateRoot			(xmlValidCtxtPtr ctxt, 
					 xmlDocPtr doc)

Try to validate a the root element basically it does the following check as described by the XML-1.0 recommendation: - [ VC: Root Element Type ] it doesn't try to recurse or apply other check to the element

`ctxt`:	the validation context
`doc`:	a document instance
`Returns`:	1 if valid or 0 otherwise

valid

Synopsis

Description