1 /*
2 * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #include <assert.h>
8
9 #include <platform_def.h>
10
11 #include <arch_helpers.h>
12 #include <common/bl_common.h>
13 #include <common/debug.h>
14 #include <common/desc_image_load.h>
15 #include <drivers/mmc.h>
16 #include <lib/xlat_tables/xlat_mmu_helpers.h>
17 #include <lib/xlat_tables/xlat_tables_defs.h>
18 #include <lib/mmio.h>
19 #include <lib/optee_utils.h>
20 #include <lib/utils.h>
21
22 #include <imx_aips.h>
23 #include <imx_caam.h>
24 #include <imx_clock.h>
25 #include <imx_csu.h>
26 #include <imx_gpt.h>
27 #include <imx_uart.h>
28 #include <imx_snvs.h>
29 #include <imx_wdog.h>
30 #include <imx7_def.h>
31
32 #ifndef AARCH32_SP_OPTEE
33 #error "Must build with OPTEE support included"
34 #endif
35
plat_get_ns_image_entrypoint(void)36 uintptr_t plat_get_ns_image_entrypoint(void)
37 {
38 return IMX7_UBOOT_BASE;
39 }
40
imx7_get_spsr_for_bl32_entry(void)41 static uint32_t imx7_get_spsr_for_bl32_entry(void)
42 {
43 return SPSR_MODE32(MODE32_svc, SPSR_T_ARM, SPSR_E_LITTLE,
44 DISABLE_ALL_EXCEPTIONS);
45 }
46
imx7_get_spsr_for_bl33_entry(void)47 static uint32_t imx7_get_spsr_for_bl33_entry(void)
48 {
49 return SPSR_MODE32(MODE32_svc,
50 plat_get_ns_image_entrypoint() & 0x1,
51 SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
52 }
53
bl2_plat_handle_post_image_load(unsigned int image_id)54 int bl2_plat_handle_post_image_load(unsigned int image_id)
55 {
56 int err = 0;
57 bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
58 bl_mem_params_node_t *hw_cfg_mem_params = NULL;
59
60 bl_mem_params_node_t *pager_mem_params = NULL;
61 bl_mem_params_node_t *paged_mem_params = NULL;
62
63 assert(bl_mem_params);
64
65 switch (image_id) {
66 case BL32_IMAGE_ID:
67 pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
68 assert(pager_mem_params);
69
70 paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
71 assert(paged_mem_params);
72
73 err = parse_optee_header(&bl_mem_params->ep_info,
74 &pager_mem_params->image_info,
75 &paged_mem_params->image_info);
76 if (err != 0)
77 WARN("OPTEE header parse error.\n");
78
79 /*
80 * When ATF loads the DTB the address of the DTB is passed in
81 * arg2, if an hw config image is present use the base address
82 * as DTB address an pass it as arg2
83 */
84 hw_cfg_mem_params = get_bl_mem_params_node(HW_CONFIG_ID);
85
86 bl_mem_params->ep_info.args.arg0 =
87 bl_mem_params->ep_info.args.arg1;
88 bl_mem_params->ep_info.args.arg1 = 0;
89 if (hw_cfg_mem_params)
90 bl_mem_params->ep_info.args.arg2 =
91 hw_cfg_mem_params->image_info.image_base;
92 else
93 bl_mem_params->ep_info.args.arg2 = 0;
94 bl_mem_params->ep_info.args.arg3 = 0;
95 bl_mem_params->ep_info.spsr = imx7_get_spsr_for_bl32_entry();
96 break;
97
98 case BL33_IMAGE_ID:
99 /* AArch32 only core: OP-TEE expects NSec EP in register LR */
100 pager_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID);
101 assert(pager_mem_params);
102 pager_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc;
103
104 /* BL33 expects to receive the primary CPU MPID (through r0) */
105 bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
106 bl_mem_params->ep_info.spsr = imx7_get_spsr_for_bl33_entry();
107 break;
108
109 default:
110 /* Do nothing in default case */
111 break;
112 }
113
114 return err;
115 }
116
bl2_el3_plat_arch_setup(void)117 void bl2_el3_plat_arch_setup(void)
118 {
119 /* Setup the MMU here */
120 }
121
imx7_setup_system_counter(void)122 static void imx7_setup_system_counter(void)
123 {
124 unsigned long freq = SYS_COUNTER_FREQ_IN_TICKS;
125
126 /* Set the frequency table index to our target frequency */
127 write_cntfrq(freq);
128
129 /* Enable system counter @ frequency table index 0, halt on debug */
130 mmio_write_32(SYS_CNTCTL_BASE + CNTCR_OFF,
131 CNTCR_FCREQ(0) | CNTCR_HDBG | CNTCR_EN);
132 }
133
imx7_setup_wdog_clocks(void)134 static void imx7_setup_wdog_clocks(void)
135 {
136 uint32_t wdog_en_bits = (uint32_t)WDOG_DEFAULT_CLK_SELECT;
137
138 imx_clock_set_wdog_clk_root_bits(wdog_en_bits);
139 imx_clock_enable_wdog(0);
140 imx_clock_enable_wdog(1);
141 imx_clock_enable_wdog(2);
142 imx_clock_enable_wdog(3);
143 }
144
145
146 /*
147 * bl2_el3_early_platform_setup()
148 * MMU off
149 */
bl2_el3_early_platform_setup(u_register_t arg1,u_register_t arg2,u_register_t arg3,u_register_t arg4)150 void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
151 u_register_t arg3, u_register_t arg4)
152 {
153 static console_t console;
154 int console_scope = CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME;
155
156 /* Initialize common components */
157 imx_aips_init();
158 imx_csu_init();
159 imx_snvs_init();
160 imx_gpt_ops_init(GPT1_BASE_ADDR);
161 imx_clock_init();
162 imx7_setup_system_counter();
163 imx7_setup_wdog_clocks();
164
165 /* Platform specific setup */
166 imx7_platform_setup(arg1, arg2, arg3, arg4);
167
168 /* Init UART, clock should be enabled in imx7_platform_setup() */
169 console_imx_uart_register(PLAT_IMX7_BOOT_UART_BASE,
170 PLAT_IMX7_BOOT_UART_CLK_IN_HZ,
171 PLAT_IMX7_CONSOLE_BAUDRATE,
172 &console);
173 console_set_scope(&console, console_scope);
174
175 /* Open handles to persistent storage */
176 plat_imx_io_setup();
177
178 /* Setup higher-level functionality CAAM, RTC etc */
179 imx_caam_init();
180 imx_wdog_init();
181
182 /* Print out the expected memory map */
183 VERBOSE("\tOPTEE 0x%08x-0x%08x\n", IMX7_OPTEE_BASE, IMX7_OPTEE_LIMIT);
184 VERBOSE("\tATF/BL2 0x%08x-0x%08x\n", BL2_RAM_BASE, BL2_RAM_LIMIT);
185 VERBOSE("\tSHRAM 0x%08x-0x%08x\n", SHARED_RAM_BASE, SHARED_RAM_LIMIT);
186 VERBOSE("\tFIP 0x%08x-0x%08x\n", IMX_FIP_BASE, IMX_FIP_LIMIT);
187 VERBOSE("\tDTB-OVERLAY 0x%08x-0x%08x\n", IMX7_DTB_OVERLAY_BASE, IMX7_DTB_OVERLAY_LIMIT);
188 VERBOSE("\tDTB 0x%08x-0x%08x\n", IMX7_DTB_BASE, IMX7_DTB_LIMIT);
189 VERBOSE("\tUBOOT/BL33 0x%08x-0x%08x\n", IMX7_UBOOT_BASE, IMX7_UBOOT_LIMIT);
190 }
191
192 /*
193 * bl2_platform_setup()
194 * MMU on - enabled by bl2_el3_plat_arch_setup()
195 */
bl2_platform_setup(void)196 void bl2_platform_setup(void)
197 {
198 }
199