1Description: 2------------ 3Tool 'create_pbl' is a standalone tool to create the PBL images. 4 where, 5 On the basis of Chassis, 6 RCW image is placed first followed by the, 7 PBI commands to copy the, 8 Input BL2 image stored on the, 9 Specified boot source (QSPI or SD or NOR) to the, 10 Specified destination address. 11 12 13Usage in standalone way: 14----------------------- 15 16./create_pbl [options] (mentioned below): 17 18 -r <RCW file-name> - name of RCW binary file. 19 -i <BL2 Bin file-name> - file to be added to rcw file. 20 -c <SoC Number> - SoC numeric identifier, may be one of 21 1012,1023,1026.1028, 22 1043,1046,1088,2080, 23 2088,2160 24 -b <boot source id> - Boot source id string, may be one of 25 "qspi", "nor", "nand", "sd", "emmc" 26 -d <Address> - Destination address where BL2 27 image is to be copied 28 -o <output filename> - Name of PBL image generated 29 as an output of the tool. 30 -e <Address> - [Optional] Entry Point Address 31 of the BL2.bin 32 -f <Address> - BL2 image offset 33 on Boot Source for block copy. 34 command for chassis >=3.) 35 (Must for Ch3, Ignored for Ch2) 36 -h Help. 37 -s Secure boot. 38 39 -s secure boot 40 -c SoC Number (see description above) 41 -b Boot source. 42 -r RCW binary file. 43 -i Input file that is to be added to rcw file. 44 -o Name of output file 45 -f Source Offset (Block Copy) 46 -d Destination address to which file has to be copied 47 -h Help. 48 49Example: 50 ./create_pbl -r <RCW file> -i <bl2.bin> -c <chassis_no> -b <boot_source = sd/qspi/nor> -d <Destination_Addr> -o <pbl_image_name> 51 52 53 54Usage at compilation time: 55-------------------------------- 56 57 make <compilation command......> pbl RCW=<Path_to_RCW_File>/<rcw_file_name.bin> 58 59Example: QSPI Boot For LS1046ARDB- 60 61 make PLAT=ls1046rdb all fip BOOT_MODE=qspi SPD=opteed BL32=tee.bin BL33=u-boot-ls1046.bin pbl RCW=/home/pankaj/flexbuild/packages/firmware/dash-rcw/ls1046ardb/RR_FFSSPPPN_1133_5506/rcw_1600_qspiboot.bin 62 63Example: QSPI Boot For LX2160ARDB- 64 65 make PLAT=lx2160ardb all fip BOOT_MODE=flexspi_nor SPD=opteed BL32=tee_lx2.bin BL33=u-boot_lx2160.bin pbl RCW=plat/nxp/soc-lx2160/lx2160ardb/rcw_1900_600_1600_19_5_2.bin 66