1 /* Copyright (c) 2007-2008 CSIRO 2 Copyright (c) 2007-2009 Xiph.Org Foundation 3 Copyright (c) 2008-2012 Gregory Maxwell 4 Written by Jean-Marc Valin and Gregory Maxwell */ 5 /* 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions 8 are met: 9 10 - Redistributions of source code must retain the above copyright 11 notice, this list of conditions and the following disclaimer. 12 13 - Redistributions in binary form must reproduce the above copyright 14 notice, this list of conditions and the following disclaimer in the 15 documentation and/or other materials provided with the distribution. 16 17 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 18 ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 20 A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER 21 OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 22 EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 23 PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 24 PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 25 LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 26 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 27 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 28 */ 29 30 /** 31 @file opus_custom.h 32 @brief Opus-Custom reference implementation API 33 */ 34 35 #ifndef OPUS_CUSTOM_H 36 #define OPUS_CUSTOM_H 37 38 #include "opus_defines.h" 39 40 #ifdef __cplusplus 41 extern "C" { 42 #endif 43 44 #ifdef CUSTOM_MODES 45 # define OPUS_CUSTOM_EXPORT OPUS_EXPORT 46 # define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT 47 #else 48 # define OPUS_CUSTOM_EXPORT 49 # ifdef OPUS_BUILD 50 # define OPUS_CUSTOM_EXPORT_STATIC static OPUS_INLINE 51 # else 52 # define OPUS_CUSTOM_EXPORT_STATIC 53 # endif 54 #endif 55 56 /** @defgroup opus_custom Opus Custom 57 * @{ 58 * Opus Custom is an optional part of the Opus specification and 59 * reference implementation which uses a distinct API from the regular 60 * API and supports frame sizes that are not normally supported.\ Use 61 * of Opus Custom is discouraged for all but very special applications 62 * for which a frame size different from 2.5, 5, 10, or 20 ms is needed 63 * (for either complexity or latency reasons) and where interoperability 64 * is less important. 65 * 66 * In addition to the interoperability limitations the use of Opus custom 67 * disables a substantial chunk of the codec and generally lowers the 68 * quality available at a given bitrate. Normally when an application needs 69 * a different frame size from the codec it should buffer to match the 70 * sizes but this adds a small amount of delay which may be important 71 * in some very low latency applications. Some transports (especially 72 * constant rate RF transports) may also work best with frames of 73 * particular durations. 74 * 75 * Libopus only supports custom modes if they are enabled at compile time. 76 * 77 * The Opus Custom API is similar to the regular API but the 78 * @ref opus_encoder_create and @ref opus_decoder_create calls take 79 * an additional mode parameter which is a structure produced by 80 * a call to @ref opus_custom_mode_create. Both the encoder and decoder 81 * must create a mode using the same sample rate (fs) and frame size 82 * (frame size) so these parameters must either be signaled out of band 83 * or fixed in a particular implementation. 84 * 85 * Similar to regular Opus the custom modes support on the fly frame size 86 * switching, but the sizes available depend on the particular frame size in 87 * use. For some initial frame sizes on a single on the fly size is available. 88 */ 89 90 /** Contains the state of an encoder. One encoder state is needed 91 for each stream. It is initialized once at the beginning of the 92 stream. Do *not* re-initialize the state for every frame. 93 @brief Encoder state 94 */ 95 typedef struct OpusCustomEncoder OpusCustomEncoder; 96 97 /** State of the decoder. One decoder state is needed for each stream. 98 It is initialized once at the beginning of the stream. Do *not* 99 re-initialize the state for every frame. 100 @brief Decoder state 101 */ 102 typedef struct OpusCustomDecoder OpusCustomDecoder; 103 104 /** The mode contains all the information necessary to create an 105 encoder. Both the encoder and decoder need to be initialized 106 with exactly the same mode, otherwise the output will be 107 corrupted. The mode MUST NOT BE DESTROYED until the encoders and 108 decoders that use it are destroyed as well. 109 @brief Mode configuration 110 */ 111 typedef struct OpusCustomMode OpusCustomMode; 112 113 /** Creates a new mode struct. This will be passed to an encoder or 114 * decoder. The mode MUST NOT BE DESTROYED until the encoders and 115 * decoders that use it are destroyed as well. 116 * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz) 117 * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each 118 * packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes) 119 * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned) 120 * @return A newly created mode 121 */ 122 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error); 123 124 /** Destroys a mode struct. Only call this after all encoders and 125 * decoders using this mode are destroyed as well. 126 * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed. 127 */ 128 OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode); 129 130 131 #if !defined(OPUS_BUILD) || defined(CELT_ENCODER_C) 132 133 /* Encoder */ 134 /** Gets the size of an OpusCustomEncoder structure. 135 * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration 136 * @param [in] channels <tt>int</tt>: Number of channels 137 * @returns size 138 */ 139 OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size( 140 const OpusCustomMode *mode, 141 int channels 142 ) OPUS_ARG_NONNULL(1); 143 144 # ifdef CUSTOM_MODES 145 /** Initializes a previously allocated encoder state 146 * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size. 147 * This is intended for applications which use their own allocator instead of malloc. 148 * @see opus_custom_encoder_create(),opus_custom_encoder_get_size() 149 * To reset a previously initialized state use the OPUS_RESET_STATE CTL. 150 * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state 151 * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of 152 * the stream (must be the same characteristics as used for the 153 * decoder) 154 * @param [in] channels <tt>int</tt>: Number of channels 155 * @return OPUS_OK Success or @ref opus_errorcodes 156 */ 157 OPUS_CUSTOM_EXPORT int opus_custom_encoder_init( 158 OpusCustomEncoder *st, 159 const OpusCustomMode *mode, 160 int channels 161 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); 162 # endif 163 #endif 164 165 166 /** Creates a new encoder state. Each stream needs its own encoder 167 * state (can't be shared across simultaneous streams). 168 * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of 169 * the stream (must be the same characteristics as used for the 170 * decoder) 171 * @param [in] channels <tt>int</tt>: Number of channels 172 * @param [out] error <tt>int*</tt>: Returns an error code 173 * @return Newly created encoder state. 174 */ 175 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create( 176 const OpusCustomMode *mode, 177 int channels, 178 int *error 179 ) OPUS_ARG_NONNULL(1); 180 181 182 /** Destroys an encoder state. 183 * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed. 184 */ 185 OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st); 186 187 /** Encodes a frame of audio. 188 * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state 189 * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0. 190 * Samples with a range beyond +/-1.0 are supported but will 191 * be clipped by decoders using the integer API and should 192 * only be used if it is known that the far end supports 193 * extended dynamic range. There must be exactly 194 * frame_size samples per channel. 195 * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal 196 * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. 197 * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame 198 * (can change from one frame to another) 199 * @return Number of bytes written to "compressed". 200 * If negative, an error has occurred (see error codes). It is IMPORTANT that 201 * the length returned be somehow transmitted to the decoder. Otherwise, no 202 * decoding is possible. 203 */ 204 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float( 205 OpusCustomEncoder *st, 206 const float *pcm, 207 int frame_size, 208 unsigned char *compressed, 209 int maxCompressedBytes 210 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); 211 212 /** Encodes a frame of audio. 213 * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state 214 * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian). 215 * There must be exactly frame_size samples per channel. 216 * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal 217 * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. 218 * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame 219 * (can change from one frame to another) 220 * @return Number of bytes written to "compressed". 221 * If negative, an error has occurred (see error codes). It is IMPORTANT that 222 * the length returned be somehow transmitted to the decoder. Otherwise, no 223 * decoding is possible. 224 */ 225 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode( 226 OpusCustomEncoder *st, 227 const opus_int16 *pcm, 228 int frame_size, 229 unsigned char *compressed, 230 int maxCompressedBytes 231 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); 232 233 /** Perform a CTL function on an Opus custom encoder. 234 * 235 * Generally the request and subsequent arguments are generated 236 * by a convenience macro. 237 * @see opus_encoderctls 238 */ 239 OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); 240 241 242 #if !defined(OPUS_BUILD) || defined(CELT_DECODER_C) 243 /* Decoder */ 244 245 /** Gets the size of an OpusCustomDecoder structure. 246 * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration 247 * @param [in] channels <tt>int</tt>: Number of channels 248 * @returns size 249 */ 250 OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size( 251 const OpusCustomMode *mode, 252 int channels 253 ) OPUS_ARG_NONNULL(1); 254 255 /** Initializes a previously allocated decoder state 256 * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size. 257 * This is intended for applications which use their own allocator instead of malloc. 258 * @see opus_custom_decoder_create(),opus_custom_decoder_get_size() 259 * To reset a previously initialized state use the OPUS_RESET_STATE CTL. 260 * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state 261 * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of 262 * the stream (must be the same characteristics as used for the 263 * encoder) 264 * @param [in] channels <tt>int</tt>: Number of channels 265 * @return OPUS_OK Success or @ref opus_errorcodes 266 */ 267 OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init( 268 OpusCustomDecoder *st, 269 const OpusCustomMode *mode, 270 int channels 271 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); 272 273 #endif 274 275 276 /** Creates a new decoder state. Each stream needs its own decoder state (can't 277 * be shared across simultaneous streams). 278 * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the 279 * stream (must be the same characteristics as used for the encoder) 280 * @param [in] channels <tt>int</tt>: Number of channels 281 * @param [out] error <tt>int*</tt>: Returns an error code 282 * @return Newly created decoder state. 283 */ 284 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create( 285 const OpusCustomMode *mode, 286 int channels, 287 int *error 288 ) OPUS_ARG_NONNULL(1); 289 290 /** Destroys a decoder state. 291 * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed. 292 */ 293 OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st); 294 295 /** Decode an opus custom frame with floating point output 296 * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state 297 * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss 298 * @param [in] len <tt>int</tt>: Number of bytes in payload 299 * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length 300 * is frame_size*channels*sizeof(float) 301 * @param [in] frame_size Number of samples per channel of available space in *pcm. 302 * @returns Number of decoded samples or @ref opus_errorcodes 303 */ 304 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float( 305 OpusCustomDecoder *st, 306 const unsigned char *data, 307 int len, 308 float *pcm, 309 int frame_size 310 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); 311 312 /** Decode an opus custom frame 313 * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state 314 * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss 315 * @param [in] len <tt>int</tt>: Number of bytes in payload 316 * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length 317 * is frame_size*channels*sizeof(opus_int16) 318 * @param [in] frame_size Number of samples per channel of available space in *pcm. 319 * @returns Number of decoded samples or @ref opus_errorcodes 320 */ 321 OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode( 322 OpusCustomDecoder *st, 323 const unsigned char *data, 324 int len, 325 opus_int16 *pcm, 326 int frame_size 327 ) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); 328 329 /** Perform a CTL function on an Opus custom decoder. 330 * 331 * Generally the request and subsequent arguments are generated 332 * by a convenience macro. 333 * @see opus_genericctls 334 */ 335 OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); 336 337 /**@}*/ 338 339 #ifdef __cplusplus 340 } 341 #endif 342 343 #endif /* OPUS_CUSTOM_H */ 344