• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * wpa_supplicant/hostapd control interface library
3  * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi>
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  */
8 
9 #ifndef WPA_CTRL_H
10 #define WPA_CTRL_H
11 
12 #ifdef  __cplusplus
13 extern "C" {
14 #endif
15 
16 /* wpa_supplicant control interface - fixed message prefixes */
17 
18 /** Interactive request for identity/password/pin */
19 #define WPA_CTRL_REQ "CTRL-REQ-"
20 
21 /** Response to identity/password/pin request */
22 #define WPA_CTRL_RSP "CTRL-RSP-"
23 
24 /* Event messages with fixed prefix */
25 /** Authentication completed successfully and data connection enabled */
26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27 /** Disconnected, data connection is not available */
28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
29 /** Association rejected during connection attempt */
30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
31 /** Authentication rejected during connection attempt */
32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
33 /** wpa_supplicant is exiting */
34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
35 /** Password change was completed successfully */
36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
37 /** EAP-Request/Notification received */
38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
39 /** EAP authentication started (EAP-Request/Identity received) */
40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
41 /** EAP method proposed by the server */
42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
43 /** EAP method selected */
44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
45 /** EAP peer certificate from TLS */
46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
47 /** EAP peer certificate alternative subject name component from TLS */
48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
49 /** EAP TLS certificate chain validation error */
50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
51 /** EAP status */
52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
53 /** Retransmit the previous request packet */
54 #define WPA_EVENT_EAP_RETRANSMIT "CTRL-EVENT-EAP-RETRANSMIT "
55 #define WPA_EVENT_EAP_RETRANSMIT2 "CTRL-EVENT-EAP-RETRANSMIT2 "
56 /** EAP authentication completed successfully */
57 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
58 #define WPA_EVENT_EAP_SUCCESS2 "CTRL-EVENT-EAP-SUCCESS2 "
59 /** EAP authentication failed (EAP-Failure received) */
60 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
61 #define WPA_EVENT_EAP_FAILURE2 "CTRL-EVENT-EAP-FAILURE2 "
62 /** EAP authentication failed due to no response received */
63 #define WPA_EVENT_EAP_TIMEOUT_FAILURE "CTRL-EVENT-EAP-TIMEOUT-FAILURE "
64 #define WPA_EVENT_EAP_TIMEOUT_FAILURE2 "CTRL-EVENT-EAP-TIMEOUT-FAILURE2 "
65 #define WPA_EVENT_EAP_ERROR_CODE "EAP-ERROR-CODE "
66 /** Network block temporarily disabled (e.g., due to authentication failure) */
67 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
68 /** Temporarily disabled network block re-enabled */
69 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
70 /** New scan started */
71 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
72 /** New scan results available */
73 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
74 /** Scan command failed */
75 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
76 /** wpa_supplicant state change */
77 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
78 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
79 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
80 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
81 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
82 /** No suitable network was found */
83 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
84 /** Change in the signal level was reported by the driver */
85 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
86 /** Beacon loss reported by the driver */
87 #define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS "
88 /** Regulatory domain channel */
89 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
90 /** Channel switch started (followed by freq=<MHz> and other channel parameters)
91  */
92 #define WPA_EVENT_CHANNEL_SWITCH_STARTED "CTRL-EVENT-STARTED-CHANNEL-SWITCH "
93 /** Channel switch (followed by freq=<MHz> and other channel parameters) */
94 #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
95 /** MLO link channel switch started (followed by freq=<MHz> and other channel
96  * parameters)
97  */
98 #define WPA_EVENT_LINK_CHANNEL_SWITCH_STARTED \
99 	"CTRL-EVENT-STARTED-LINK-CHANNEL-SWITCH "
100 /** MLO link channel switch (followed by freq=<MHz> and other channel
101  * parameters)
102  */
103 #define WPA_EVENT_LINK_CHANNEL_SWITCH "CTRL-EVENT-LINK-CHANNEL-SWITCH "
104 /** SAE authentication failed due to unknown password identifier */
105 #define WPA_EVENT_SAE_UNKNOWN_PASSWORD_IDENTIFIER \
106 	"CTRL-EVENT-SAE-UNKNOWN-PASSWORD-IDENTIFIER "
107 /** Unprotected Beacon frame dropped */
108 #define WPA_EVENT_UNPROT_BEACON "CTRL-EVENT-UNPROT-BEACON "
109 /** Decision made to do a within-ESS roam */
110 #define WPA_EVENT_DO_ROAM "CTRL-EVENT-DO-ROAM "
111 /** Decision made to skip a within-ESS roam */
112 #define WPA_EVENT_SKIP_ROAM "CTRL-EVENT-SKIP-ROAM "
113 /** TID-to-link mapping response event */
114 #define WPA_EVENT_T2LM_UPDATE "CTRL-EVENT-T2LM-UPDATE "
115 /** MLO link reconfiguration event */
116 #define WPA_EVENT_LINK_RECONFIG "CTRL-EVENT-LINK-RECONFIG "
117 
118 /** IP subnet status change notification
119  *
120  * When using an offloaded roaming mechanism where driver/firmware takes care
121  * of roaming and IP subnet validation checks post-roaming, this event can
122  * indicate whether IP subnet has changed.
123  *
124  * The event has a status=<0/1/2> parameter where
125  * 0 = unknown
126  * 1 = IP subnet unchanged (can continue to use the old IP address)
127  * 2 = IP subnet changed (need to get a new IP address)
128  */
129 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
130 
131 /** RSN IBSS 4-way handshakes completed with specified peer */
132 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
133 
134 /** Notification of frequency conflict due to a concurrent operation.
135  *
136  * The indicated network is disabled and needs to be re-enabled before it can
137  * be used again.
138  */
139 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
140 /** Frequency ranges that the driver recommends to avoid */
141 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
142 /** A new network profile was added (followed by network entry id) */
143 #define WPA_EVENT_NETWORK_ADDED "CTRL-EVENT-NETWORK-ADDED "
144 /** A network profile was removed (followed by prior network entry id) */
145 #define WPA_EVENT_NETWORK_REMOVED "CTRL-EVENT-NETWORK-REMOVED "
146 /** Result of MSCS setup */
147 #define WPA_EVENT_MSCS_RESULT "CTRL-EVENT-MSCS-RESULT "
148 /** WPS overlap detected in PBC mode */
149 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
150 /** Available WPS AP with active PBC found in scan results */
151 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
152 /** Available WPS AP with our address as authorized in scan results */
153 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
154 /** Available WPS AP with recently selected PIN registrar found in scan results
155  */
156 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
157 /** Available WPS AP found in scan results */
158 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
159 /** A new credential received */
160 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
161 /** M2D received */
162 #define WPS_EVENT_M2D "WPS-M2D "
163 /** WPS registration failed after M2/M2D */
164 #define WPS_EVENT_FAIL "WPS-FAIL "
165 /** WPS registration completed successfully */
166 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
167 /** WPS enrollment attempt timed out and was terminated */
168 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
169 /* PBC mode was activated */
170 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
171 /* PBC mode was disabled */
172 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
173 
174 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
175 
176 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
177 /** Result of SCS setup */
178 #define WPA_EVENT_SCS_RESULT "CTRL-EVENT-SCS-RESULT "
179 /* Event indicating DSCP policy */
180 #define WPA_EVENT_DSCP_POLICY "CTRL-EVENT-DSCP-POLICY "
181 
182 /* WPS ER events */
183 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
184 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
185 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
186 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
187 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
188 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
189 
190 /* DPP events */
191 #define DPP_EVENT_AUTH_SUCCESS "DPP-AUTH-SUCCESS "
192 #define DPP_EVENT_AUTH_INIT_FAILED "DPP-AUTH-INIT-FAILED "
193 #define DPP_EVENT_NOT_COMPATIBLE "DPP-NOT-COMPATIBLE "
194 #define DPP_EVENT_RESPONSE_PENDING "DPP-RESPONSE-PENDING "
195 #define DPP_EVENT_SCAN_PEER_QR_CODE "DPP-SCAN-PEER-QR-CODE "
196 #define DPP_EVENT_AUTH_DIRECTION "DPP-AUTH-DIRECTION "
197 #define DPP_EVENT_CONF_RECEIVED "DPP-CONF-RECEIVED "
198 #define DPP_EVENT_CONF_SENT "DPP-CONF-SENT "
199 #define DPP_EVENT_CONF_FAILED "DPP-CONF-FAILED "
200 #define DPP_EVENT_CONN_STATUS_RESULT "DPP-CONN-STATUS-RESULT "
201 #define DPP_EVENT_CONFOBJ_AKM "DPP-CONFOBJ-AKM "
202 #define DPP_EVENT_CONFOBJ_SSID "DPP-CONFOBJ-SSID "
203 #define DPP_EVENT_CONFOBJ_SSID_CHARSET "DPP-CONFOBJ-SSID-CHARSET "
204 #define DPP_EVENT_CONFOBJ_PASS "DPP-CONFOBJ-PASS "
205 #define DPP_EVENT_CONFOBJ_PSK "DPP-CONFOBJ-PSK "
206 #define DPP_EVENT_CONNECTOR "DPP-CONNECTOR "
207 #define DPP_EVENT_C_SIGN_KEY "DPP-C-SIGN-KEY "
208 #define DPP_EVENT_PP_KEY "DPP-PP-KEY "
209 #define DPP_EVENT_NET_ACCESS_KEY "DPP-NET-ACCESS-KEY "
210 #define DPP_EVENT_SERVER_NAME "DPP-SERVER-NAME "
211 #define DPP_EVENT_CERTBAG "DPP-CERTBAG "
212 #define DPP_EVENT_CACERT "DPP-CACERT "
213 #define DPP_EVENT_MISSING_CONNECTOR "DPP-MISSING-CONNECTOR "
214 #define DPP_EVENT_NETWORK_ID "DPP-NETWORK-ID "
215 #define DPP_EVENT_CONFIGURATOR_ID "DPP-CONFIGURATOR-ID "
216 #define DPP_EVENT_RX "DPP-RX "
217 #define DPP_EVENT_TX "DPP-TX "
218 #define DPP_EVENT_TX_STATUS "DPP-TX-STATUS "
219 #define DPP_EVENT_FAIL "DPP-FAIL "
220 #define DPP_EVENT_PKEX_T_LIMIT "DPP-PKEX-T-LIMIT "
221 #define DPP_EVENT_INTRO "DPP-INTRO "
222 #define DPP_EVENT_CONF_REQ_RX "DPP-CONF-REQ-RX "
223 #define DPP_EVENT_CHIRP_STOPPED "DPP-CHIRP-STOPPED "
224 #define DPP_EVENT_MUD_URL "DPP-MUD-URL "
225 #define DPP_EVENT_BAND_SUPPORT "DPP-BAND-SUPPORT "
226 #define DPP_EVENT_CSR "DPP-CSR "
227 #define DPP_EVENT_CHIRP_RX "DPP-CHIRP-RX "
228 #define DPP_EVENT_CONF_NEEDED "DPP-CONF-NEEDED "
229 #define DPP_EVENT_PB_STATUS "DPP-PB-STATUS "
230 #define DPP_EVENT_PB_RESULT "DPP-PB-RESULT "
231 #define DPP_EVENT_RELAY_NEEDS_CONTROLLER "DPP-RELAY-NEEDS-CONTROLLER "
232 
233 /* MESH events */
234 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
235 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
236 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
237 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
238 /** Mesh SAE authentication failure. Wrong password suspected. */
239 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
240 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
241 
242 /* WMM AC events */
243 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
244 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
245 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
246 
247 /** P2P device found */
248 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
249 
250 /** P2P device lost */
251 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
252 
253 /** A P2P device requested GO negotiation, but we were not ready to start the
254  * negotiation */
255 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
256 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
257 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
258 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
259 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
260 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
261 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
262 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
263 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
264 /* parameters: <peer address> <PIN> */
265 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
266 /* parameters: <peer address> */
267 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
268 /* parameters: <peer address> */
269 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
270 /* parameters: <peer address> */
271 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
272 /* parameters: <peer address> <status> */
273 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
274 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
275 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
276 /* parameters: <src addr> <update indicator> <TLVs> */
277 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
278 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
279 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
280 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
281 #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
282 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
283 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
284 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
285 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
286 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
287 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
288 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
289 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
290 
291 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
292 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
293 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
294 
295 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
296 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
297 
298 #define INTERWORKING_AP "INTERWORKING-AP "
299 #define INTERWORKING_EXCLUDED "INTERWORKING-BLACKLISTED "
300 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
301 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
302 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
303 
304 /* Credential block added; parameters: <id> */
305 #define CRED_ADDED "CRED-ADDED "
306 /* Credential block modified; parameters: <id> <field> */
307 #define CRED_MODIFIED "CRED-MODIFIED "
308 /* Credential block removed; parameters: <id> */
309 #define CRED_REMOVED "CRED-REMOVED "
310 
311 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
312 /* parameters: <addr> <dialog_token> <freq> */
313 #define GAS_QUERY_START "GAS-QUERY-START "
314 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
315 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
316 
317 /* parameters: <addr> <result> */
318 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
319 
320 #define RX_ANQP "RX-ANQP "
321 #define RX_HS20_ANQP "RX-HS20-ANQP "
322 #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
323 #define RX_HS20_ICON "RX-HS20-ICON "
324 #define RX_MBO_ANQP "RX-MBO-ANQP "
325 
326 /* parameters: <Venue Number> <Venue URL> */
327 #define RX_VENUE_URL "RX-VENUE-URL "
328 
329 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
330 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
331 #define HS20_T_C_ACCEPTANCE "HS20-T-C-ACCEPTANCE "
332 
333 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
334 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
335 
336 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
337 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
338 
339 /* hostapd control interface - fixed message prefixes */
340 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
341 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
342 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
343 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
344 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
345 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
346 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
347 #define WPS_EVENT_PIN_ACTIVE "WPS-PIN-ACTIVE "
348 #define WPS_EVENT_CANCEL "WPS-CANCEL "
349 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
350 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
351 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
352 #define AP_STA_POLL_OK "AP-STA-POLL-OK "
353 
354 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
355 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
356 
357 #define HS20_T_C_FILTERING_ADD "HS20-T-C-FILTERING-ADD "
358 #define HS20_T_C_FILTERING_REMOVE "HS20-T-C-FILTERING-REMOVE "
359 
360 #define AP_EVENT_ENABLED "AP-ENABLED "
361 #define AP_EVENT_DISABLED "AP-DISABLED "
362 
363 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
364 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
365 
366 #define ACS_EVENT_STARTED "ACS-STARTED "
367 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
368 #define ACS_EVENT_FAILED "ACS-FAILED "
369 
370 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
371 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
372 #define DFS_EVENT_CAC_START "DFS-CAC-START "
373 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
374 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
375 #define DFS_EVENT_PRE_CAC_EXPIRED "DFS-PRE-CAC-EXPIRED "
376 
377 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
378 
379 #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
380 #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
381 
382 /* BSS Transition Management Query frame received */
383 #define BSS_TM_QUERY "BSS-TM-QUERY "
384 
385 /* BSS Transition Management Response frame received */
386 #define BSS_TM_RESP "BSS-TM-RESP "
387 
388 /* Collocated Interference Request frame received;
389  * parameters: <dialog token> <automatic report enabled> <report timeout> */
390 #define COLOC_INTF_REQ "COLOC-INTF-REQ "
391 /* Collocated Interference Report frame received;
392  * parameters: <STA address> <dialog token> <hexdump of report elements> */
393 #define COLOC_INTF_REPORT "COLOC-INTF-REPORT "
394 
395 /* MBO IE with cellular data connection preference received */
396 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
397 
398 /* BSS Transition Management Request received with MBO transition reason */
399 #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
400 
401 /* parameters: <STA address> <dialog token> <ack=0/1> */
402 #define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS "
403 /* parameters: <STA address> <dialog token> <report mode> <beacon report> */
404 #define BEACON_RESP_RX "BEACON-RESP-RX "
405 
406 /* PMKSA cache entry added; parameters: <BSSID> <network_id> */
407 #define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED "
408 /* PMKSA cache entry removed; parameters: <BSSID> <network_id> */
409 #define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED "
410 
411 /* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump>
412  */
413 #define FILS_HLP_RX "FILS-HLP-RX "
414 
415 /* Event to indicate Probe Request frame;
416  * parameters: sa=<STA MAC address> signal=<signal> */
417 #define RX_PROBE_REQUEST "RX-PROBE-REQUEST "
418 
419 /* Event to indicate station's HT/VHT operation mode change information */
420 #define STA_OPMODE_MAX_BW_CHANGED "STA-OPMODE-MAX-BW-CHANGED "
421 #define STA_OPMODE_SMPS_MODE_CHANGED "STA-OPMODE-SMPS-MODE-CHANGED "
422 #define STA_OPMODE_N_SS_CHANGED "STA-OPMODE-N_SS-CHANGED "
423 
424 /* New interface addition or removal for 4addr WDS SDA */
425 #define WDS_STA_INTERFACE_ADDED "WDS-STA-INTERFACE-ADDED "
426 #define WDS_STA_INTERFACE_REMOVED "WDS-STA-INTERFACE-REMOVED "
427 
428 /* Transition mode disabled indication - followed by bitmap */
429 #define TRANSITION_DISABLE "TRANSITION-DISABLE "
430 
431 /* OCV validation failure; parameters: addr=<src addr>
432  * frame=<saqueryreq/saqueryresp> error=<error string> */
433 #define OCV_FAILURE "OCV-FAILURE "
434 
435 /* Event triggered for received management frame */
436 #define AP_MGMT_FRAME_RECEIVED "AP-MGMT-FRAME-RECEIVED "
437 
438 #ifndef BIT
439 #define BIT(x) (1U << (x))
440 #endif
441 
442 /* PASN authentication status */
443 #define PASN_AUTH_STATUS "PASN-AUTH-STATUS "
444 
445 /* BSS command information masks */
446 
447 #define WPA_BSS_MASK_ALL		0xFFFDFFFF
448 #define WPA_BSS_MASK_ID			BIT(0)
449 #define WPA_BSS_MASK_BSSID		BIT(1)
450 #define WPA_BSS_MASK_FREQ		BIT(2)
451 #define WPA_BSS_MASK_BEACON_INT		BIT(3)
452 #define WPA_BSS_MASK_CAPABILITIES	BIT(4)
453 #define WPA_BSS_MASK_QUAL		BIT(5)
454 #define WPA_BSS_MASK_NOISE		BIT(6)
455 #define WPA_BSS_MASK_LEVEL		BIT(7)
456 #define WPA_BSS_MASK_TSF		BIT(8)
457 #define WPA_BSS_MASK_AGE		BIT(9)
458 #define WPA_BSS_MASK_IE			BIT(10)
459 #define WPA_BSS_MASK_FLAGS		BIT(11)
460 #define WPA_BSS_MASK_SSID		BIT(12)
461 #define WPA_BSS_MASK_WPS_SCAN		BIT(13)
462 #define WPA_BSS_MASK_P2P_SCAN		BIT(14)
463 #define WPA_BSS_MASK_INTERNETW		BIT(15)
464 #define WPA_BSS_MASK_WIFI_DISPLAY	BIT(16)
465 #define WPA_BSS_MASK_DELIM		BIT(17)
466 #define WPA_BSS_MASK_MESH_SCAN		BIT(18)
467 #define WPA_BSS_MASK_SNR		BIT(19)
468 #define WPA_BSS_MASK_EST_THROUGHPUT	BIT(20)
469 #define WPA_BSS_MASK_FST		BIT(21)
470 #define WPA_BSS_MASK_UPDATE_IDX		BIT(22)
471 #define WPA_BSS_MASK_BEACON_IE		BIT(23)
472 #define WPA_BSS_MASK_FILS_INDICATION	BIT(24)
473 #define WPA_BSS_MASK_RNR		BIT(25)
474 #define WPA_BSS_MASK_ML			BIT(26)
475 
476 
477 /* VENDOR_ELEM_* frame id values */
478 enum wpa_vendor_elem_frame {
479 	VENDOR_ELEM_PROBE_REQ_P2P = 0,
480 	VENDOR_ELEM_PROBE_RESP_P2P = 1,
481 	VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
482 	VENDOR_ELEM_BEACON_P2P_GO = 3,
483 	VENDOR_ELEM_P2P_PD_REQ = 4,
484 	VENDOR_ELEM_P2P_PD_RESP = 5,
485 	VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
486 	VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
487 	VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
488 	VENDOR_ELEM_P2P_INV_REQ = 9,
489 	VENDOR_ELEM_P2P_INV_RESP = 10,
490 	VENDOR_ELEM_P2P_ASSOC_REQ = 11,
491 	VENDOR_ELEM_P2P_ASSOC_RESP = 12,
492 	VENDOR_ELEM_ASSOC_REQ = 13,
493 	VENDOR_ELEM_PROBE_REQ = 14,
494 	NUM_VENDOR_ELEM_FRAMES
495 };
496 
497 
498 /* wpa_supplicant/hostapd control interface access */
499 
500 /**
501  * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
502  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
503  * Returns: Pointer to abstract control interface data or %NULL on failure
504  *
505  * This function is used to open a control interface to wpa_supplicant/hostapd.
506  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
507  * is configured in wpa_supplicant/hostapd and other programs using the control
508  * interface need to use matching path configuration.
509  */
510 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
511 
512 /**
513  * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
514  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
515  * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
516  *            is used.
517  * Returns: Pointer to abstract control interface data or %NULL on failure
518  *
519  * This function is used to open a control interface to wpa_supplicant/hostapd
520  * when the socket path for client need to be specified explicitly. Default
521  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
522  * socket path is /tmp.
523  */
524 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
525 
526 
527 /**
528  * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
529  * @ctrl: Control interface data from wpa_ctrl_open()
530  *
531  * This function is used to close a control interface.
532  */
533 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
534 
535 
536 /**
537  * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
538  * @ctrl: Control interface data from wpa_ctrl_open()
539  * @cmd: Command; usually, ASCII text, e.g., "PING"
540  * @cmd_len: Length of the cmd in bytes
541  * @reply: Buffer for the response
542  * @reply_len: Reply buffer length
543  * @msg_cb: Callback function for unsolicited messages or %NULL if not used
544  * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
545  *
546  * This function is used to send commands to wpa_supplicant/hostapd. Received
547  * response will be written to reply and reply_len is set to the actual length
548  * of the reply. This function will block for up to 10 seconds while waiting
549  * for the reply. If unsolicited messages are received, the blocking time may
550  * be longer.
551  *
552  * msg_cb can be used to register a callback function that will be called for
553  * unsolicited messages received while waiting for the command response. These
554  * messages may be received if wpa_ctrl_request() is called at the same time as
555  * wpa_supplicant/hostapd is sending such a message. This can happen only if
556  * the program has used wpa_ctrl_attach() to register itself as a monitor for
557  * event messages. Alternatively to msg_cb, programs can register two control
558  * interface connections and use one of them for commands and the other one for
559  * receiving event messages, in other words, call wpa_ctrl_attach() only for
560  * the control interface connection that will be used for event messages.
561  */
562 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
563 		     char *reply, size_t *reply_len,
564 		     void (*msg_cb)(char *msg, size_t len));
565 
566 
567 /**
568  * wpa_ctrl_attach - Register as an event monitor for the control interface
569  * @ctrl: Control interface data from wpa_ctrl_open()
570  * Returns: 0 on success, -1 on failure, -2 on timeout
571  *
572  * This function registers the control interface connection as a monitor for
573  * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
574  * control interface connection starts receiving event messages that can be
575  * read with wpa_ctrl_recv().
576  */
577 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
578 
579 
580 /**
581  * wpa_ctrl_detach - Unregister event monitor from the control interface
582  * @ctrl: Control interface data from wpa_ctrl_open()
583  * Returns: 0 on success, -1 on failure, -2 on timeout
584  *
585  * This function unregisters the control interface connection as a monitor for
586  * wpa_supplicant/hostapd events, i.e., cancels the registration done with
587  * wpa_ctrl_attach().
588  */
589 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
590 
591 
592 /**
593  * wpa_ctrl_recv - Receive a pending control interface message
594  * @ctrl: Control interface data from wpa_ctrl_open()
595  * @reply: Buffer for the message data
596  * @reply_len: Length of the reply buffer
597  * Returns: 0 on success, -1 on failure
598  *
599  * This function will receive a pending control interface message. The received
600  * response will be written to reply and reply_len is set to the actual length
601  * of the reply.
602 
603  * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
604  * must have been used to register the control interface as an event monitor.
605  */
606 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
607 
608 
609 /**
610  * wpa_ctrl_pending - Check whether there are pending event messages
611  * @ctrl: Control interface data from wpa_ctrl_open()
612  * Returns: 1 if there are pending messages, 0 if no, or -1 on error
613  *
614  * This function will check whether there are any pending control interface
615  * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
616  * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
617  * register the control interface as an event monitor.
618  */
619 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
620 
621 
622 /**
623  * wpa_ctrl_get_fd - Get file descriptor used by the control interface
624  * @ctrl: Control interface data from wpa_ctrl_open()
625  * Returns: File descriptor used for the connection
626  *
627  * This function can be used to get the file descriptor that is used for the
628  * control interface connection. The returned value can be used, e.g., with
629  * select() while waiting for multiple events.
630  *
631  * The returned file descriptor must not be used directly for sending or
632  * receiving packets; instead, the library functions wpa_ctrl_request() and
633  * wpa_ctrl_recv() must be used for this.
634  */
635 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
636 
637 #ifdef ANDROID
638 /**
639  * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
640  * may be left over from clients that were previously connected to
641  * wpa_supplicant. This keeps these files from being orphaned in the
642  * event of crashes that prevented them from being removed as part
643  * of the normal orderly shutdown.
644  */
645 void wpa_ctrl_cleanup(void);
646 #endif /* ANDROID */
647 
648 #ifdef CONFIG_CTRL_IFACE_UDP
649 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
650 #define WPA_CTRL_IFACE_PORT 9877
651 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
652 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
653 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
654 
655 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
656 #endif /* CONFIG_CTRL_IFACE_UDP */
657 
658 
659 #ifdef  __cplusplus
660 }
661 #endif
662 
663 #endif /* WPA_CTRL_H */
664