1<6>[ 0.000000] Initializing cgroup subsys cpu 2<5>[ 0.000000] Linux version 3.0.8-g6656123 (android-build@vpbs1.mtv.corp.google.com) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Feb 2 16:56:02 PST 2012 3<4>[ 0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f 4<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache 5<4>[ 0.000000] Machine: herring 6<6>[ 0.000000] Partition (from atag) bootloader -- Offset:0x00000000 Size:0x00200000 7<6>[ 0.000000] Partition (from atag) misc -- Offset:0x004c0000 Size:0x00140000 8<6>[ 0.000000] Partition (from atag) boot -- Offset:0x00600000 Size:0x00800000 9<6>[ 0.000000] Partition (from atag) recovery -- Offset:0x00e00000 Size:0x00800000 10<6>[ 0.000000] Partition (from atag) cache -- Offset:0x01600000 Size:0x1d580000 11<6>[ 0.000000] Partition (from atag) radio -- Offset:0x1eb80000 Size:0x00d80000 12<6>[ 0.000000] Partition (from atag) efs -- Offset:0x1f900000 Size:0x006c0000 13<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback 14<4>[ 0.000000] CPU S5PV210/S5PC110 (id 0x43110222) 15<7>[ 0.000000] s5pv210_init_clocks: initializing clocks 16<6>[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics 17<4>[ 0.000000] s3c24xx_register_clock: new clock sclk_csis, id -1, dev (null) uses same enable bit as mout_csis, id -1, dev (null) 18<4>[ 0.000000] s3c24xx_register_clock: new clock lcd, id -1, dev (null) uses same enable bit as sclk_fimd, id -1, dev (null) 19<4>[ 0.000000] s3c24xx_register_clock: new clock mfc, id -1, dev (null) uses same enable bit as sclk_mfc, id -1, dev (null) 20<4>[ 0.000000] s3c24xx_register_clock: new clock iis, id 0, dev (null) uses same enable bit as i2s_v50, id 0, dev (null) 21<7>[ 0.000000] s5pv210_setup_clocks: registering clocks 22<7>[ 0.000000] s5pv210_setup_clocks: clkdiv0 = 14131330, clkdiv1 = 00300400 23<7>[ 0.000000] s5pv210_setup_clocks: xtal is 24000000 24<6>[ 0.000000] S5PV210: PLL settings, A=800000000, M=667000000, E=96000000 V=54000000 25<6>[ 0.000000] S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000 26<6>[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000 27<6>[ 0.000000] sclk_dmc: source is mout_mpll (1), rate is 166750000 28<6>[ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000 29<6>[ 0.000000] sclk: source is mout_mpll (6), rate is 133400000 30<6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000 31<6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000 32<6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000 33<6>[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000 34<6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000 35<6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000 36<6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000 37<6>[ 0.000000] sclk_cam: source is xusbxti (1), rate is 24000000 38<6>[ 0.000000] sclk_cam: source is ext_xtal (0), rate is 24000000 39<6>[ 0.000000] sclk_fimd: source is mout_mpll (6), rate is 166750000 40<6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692 41<6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857 42<6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857 43<6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857 44<6>[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000 45<6>[ 0.000000] sclk_fimg2d: source is sclk_a2m (0), rate is 200000000 46<6>[ 0.000000] sclk: source is mout_mpll (1), rate is 66700000 47<6>[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000 48<6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000 49<6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000 50<6>[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000 51<6>[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000 52<6>[ 0.000000] sclk_mdnie: source is mout_mpll (6), rate is 166750000 53<6>[ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000 54<6>[ 0.000000] s5p: 37748736 bytes system memory reserved for mfc at 0x32c00000, 0-bank base(0x32c00000) 55<6>[ 0.000000] s5p: 37748736 bytes system memory reserved for mfc at 0x4dc00000, 1-bank base(0x4dc00000) 56<6>[ 0.000000] s5p: 6291456 bytes system memory reserved for fimc0 at 0x4d600000, 1-bank base(0x4d600000) 57<6>[ 0.000000] s5p: 10137600 bytes system memory reserved for fimc1 at 0x4cc55000, 1-bank base(0x4cc55000) 58<6>[ 0.000000] s5p: 6291456 bytes system memory reserved for fimc2 at 0x4c655000, 1-bank base(0x4c655000) 59<6>[ 0.000000] s5p: 8388608 bytes system memory reserved for jpeg at 0x32400000, 0-bank base(0x32400000) 60<6>[ 0.000000] s5p: 15360000 bytes system memory reserved for fimd at 0x4b7af000, 1-bank base(0x4b7af000) 61<7>[ 0.000000] On node 0 totalpages: 88751 62<7>[ 0.000000] Normal zone: 1278 pages used for memmap 63<7>[ 0.000000] Normal zone: 0 pages reserved 64<7>[ 0.000000] Normal zone: 87473 pages, LIFO batch:15 65<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 66<7>[ 0.000000] pcpu-alloc: [0] 0 67<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 87473 68<5>[ 0.000000] Kernel command line: console=ttyFIQ0 no_console_suspend androidboot.serialno=363581CC0B5F00EC androidboot.bootloader=D720SPRKE1 androidboot.baseband=D720SPRLC1 androidboot.info=0x1,0x0,0 androidboot.carrier=SPR gain_code=0 s3cfb.bootloaderfb=0x34a00000 mach-herring.lcd_type=0x00000000 oem_state=locked 69<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) 70<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) 71<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) 72<6>[ 0.000000] Memory: 36MB 183MB 127MB = 346MB total 73<5>[ 0.000000] Memory: 342568k/461676k available, 12436k reserved, 0K highmem 74<5>[ 0.000000] Virtual kernel memory layout: 75<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) 76<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) 77<5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) 78<5>[ 0.000000] vmalloc : 0xe8000000 - 0xfc000000 ( 320 MB) 79<5>[ 0.000000] lowmem : 0xc0000000 - 0xe7f00000 ( 639 MB) 80<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) 81<5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB) 82<5>[ 0.000000] .text : 0xc0032000 - 0xc065b000 (6308 kB) 83<5>[ 0.000000] .data : 0xc065c000 - 0xc06a2d80 ( 284 kB) 84<5>[ 0.000000] .bss : 0xc06a2da4 - 0xc07e1550 (1274 kB) 85<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 86<6>[ 0.000000] Preemptible hierarchical RCU implementation. 87<6>[ 0.000000] NR_IRQS:339 88<6>[ 0.000000] VIC @fc000000: id 0x00041192, vendor 0x41 89<6>[ 0.000000] VIC @fc010000: id 0x00041192, vendor 0x41 90<6>[ 0.000000] VIC @fc020000: id 0x00041192, vendor 0x41 91<6>[ 0.000000] VIC @fc030000: id 0x00041192, vendor 0x41 92<6>[ 0.000000] mult[140737] 93<6>[ 0.000000] max_delta_ns[2937815369] 94<6>[ 0.000000] min_delta_ns[30517] 95<6>[ 0.000000] rate[32768] 96<6>[ 0.000000] HZ[256] 97<6>[ 0.000082] Calibrating delay loop... 795.12 BogoMIPS (lpj=1554432) 98<6>[ 0.027254] pid_max: default: 32768 minimum: 301 99<6>[ 0.027422] Mount-cache hash table entries: 512 100<6>[ 0.027727] Initializing cgroup subsys debug 101<6>[ 0.027740] Initializing cgroup subsys cpuacct 102<6>[ 0.027758] Initializing cgroup subsys freezer 103<6>[ 0.027788] CPU: Testing write buffer coherency: ok 104<6>[ 0.029931] print_constraints: dummy: 105<6>[ 0.030063] NET: Registered protocol family 16 106<4>[ 0.032825] clk_get: could not find clock (null) for dev s5pv210_device_fiqdbg_uart2+0x8/0xd8 (fiq_debugger.2) 107<6>[ 0.036305] console [ttyFIQ0] enabled 108<6>[ 0.036382] Registered FIQ tty driver e7856cc0 109<6>[ 0.038338] ram_console: got buffer at 57f00000, size ff000 110<6>[ 0.038517] ram_console: uncorrectable error in header 111<6>[ 0.038527] ram_console: no valid data in buffer (sig = 0xfffffffc) 112<6>[ 0.049175] console [ram-1] enabled 113<6>[ 0.049403] S5PC110 Hardware version : EVT1 114<6>[ 0.049555] HWREV is 0x0 115<3>[ 0.050273] invalid media device 116<3>[ 0.050350] invalid media device 117<3>[ 0.050488] invalid media device 118<3>[ 0.050563] invalid media device 119<3>[ 0.050637] invalid media device 120<3>[ 0.050725] invalid media device 121<4>[ 0.050955] S3C Power Management, Copyright 2004 Simtec Electronics 122<6>[ 0.051037] pmstats at 57fff000 123<6>[ 0.052111] S5PV210: Initializing architecture 124<6>[ 0.052442] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0 125<6>[ 0.052619] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8 126<6>[ 0.052734] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12 127<6>[ 0.052910] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16 128<6>[ 0.053201] print_constraints: pd_audio_supply: 5000 mV normal 129<6>[ 0.053444] print_constraints: pd_cam_supply: 5000 mV normal 130<6>[ 0.053626] print_constraints: pd_tv_supply: 5000 mV normal 131<6>[ 0.053859] print_constraints: pd_lcd_supply: 5000 mV normal 132<6>[ 0.054029] print_constraints: pd_g3d_supply: 5000 mV normal 133<6>[ 0.054263] print_constraints: pd_mfc_supply: 5000 mV normal 134<6>[ 0.059056] bio: create slab <bio-0> at 0 135<5>[ 0.059756] SCSI subsystem initialized 136<6>[ 0.060018] usbcore: registered new interface driver usbfs 137<6>[ 0.060175] usbcore: registered new interface driver hub 138<6>[ 0.060414] usbcore: registered new device driver usb 139<6>[ 0.060760] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL) 140<3>[ 0.061095] max8998 6-0066: No interrupt base specified, no interrupts 141<3>[ 0.062807] i2:10, buck2_idx:0 142<6>[ 0.064303] print_constraints: VALIVE_1.2V: 1200 mV 143<6>[ 0.064928] print_constraints: VUSB_1.1V: 1100 mV 144<6>[ 0.065996] print_constraints: VADC_3.3V: 3300 mV 145<6>[ 0.067164] print_constraints: VLCD_1.8V: 1800 mV 146<6>[ 0.067790] print_constraints: VUSB_3.3V: 3300 mV 147<6>[ 0.068928] print_constraints: VCC_2.8V_PDA: 2800 mV 148<6>[ 0.069556] print_constraints: CAM_AF_3.0V: 3000 mV 149<6>[ 0.070269] print_constraints: VGA_VDDIO_2.8V: 2800 mV 150<6>[ 0.070899] print_constraints: VGA_DVDD_1.8V: 1800 mV 151<6>[ 0.071524] print_constraints: CAM_ISP_HOST_2.8V: 2800 mV 152<6>[ 0.072220] print_constraints: VGA_AVDD_2.8V: 2800 mV 153<6>[ 0.073303] print_constraints: VCC_3.0V_LCD: 3000 mV 154<6>[ 0.073807] print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV 155<6>[ 0.074263] print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV 156<6>[ 0.075217] print_constraints: VCC_1.8V: 1800 mV 157<6>[ 0.075654] print_constraints: CAM_ISP_CORE_1.2V: 1200 mV 158<3>[ 0.075976] i2c i2c-6: Failed to register i2c client rtc_max8998 at 0x06 (-16) 159<3>[ 0.076060] i2c i2c-6: Can't create device at 0x06 160<6>[ 0.076146] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL) 161<6>[ 0.076356] i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL) 162<6>[ 0.076577] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL) 163<6>[ 0.076849] i2c-gpio i2c-gpio.9: using pins 245 (SDA) and 244 (SCL) 164<6>[ 0.077063] i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL) 165<6>[ 0.077288] i2c-gpio i2c-gpio.12: using pins 173 (SDA) and 172 (SCL) 166<6>[ 0.077497] i2c-gpio i2c-gpio.14: using pins 240 (SDA) and 239 (SCL) 167<6>[ 0.077775] i2c-gpio i2c-gpio.10: using pins 197 (SDA) and 198 (SCL) 168<6>[ 0.077943] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL) 169<6>[ 0.078686] print_constraints: max8893_buck: 1200 mV 170<6>[ 0.079236] print_constraints: max8893_ldo1: 2800 mV 171<6>[ 0.079839] print_constraints: max8893_ldo2: 2800 mV 172<6>[ 0.080386] print_constraints: max8893_ldo3: 3300 mV 173<6>[ 0.080986] print_constraints: max8893_ldo4: 2900 mV 174<6>[ 0.081513] print_constraints: max8893_ldo5: 2800 mV 175<6>[ 0.081680] max8893 15-003e: Maxim 8893 regulator driver loaded 176<6>[ 0.081769] i2c-gpio i2c-gpio.15: using pins 29 (SDA) and 31 (SCL) 177<6>[ 0.082168] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter 178<6>[ 0.082442] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter 179<6>[ 0.082728] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter 180<6>[ 0.083019] Advanced Linux Sound Architecture Driver Version 1.0.24. 181<6>[ 0.083521] Bluetooth: Core ver 2.16 182<6>[ 0.083636] NET: Registered protocol family 31 183<6>[ 0.083716] Bluetooth: HCI device and connection manager initialized 184<6>[ 0.083862] Bluetooth: HCI socket layer initialized 185<6>[ 0.083942] Bluetooth: L2CAP socket layer initialized 186<6>[ 0.084094] Bluetooth: SCO socket layer initialized 187<6>[ 0.084271] Switching to clocksource clock_source_systimer 188<6>[ 0.085188] NET: Registered protocol family 2 189<6>[ 0.085422] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) 190<6>[ 0.085884] Switched to NOHz mode on CPU #0 191<6>[ 0.086226] TCP established hash table entries: 16384 (order: 5, 131072 bytes) 192<6>[ 0.086624] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) 193<6>[ 0.086850] TCP: Hash tables configured (established 16384 bind 16384) 194<6>[ 0.086992] TCP reno registered 195<6>[ 0.087074] UDP hash table entries: 256 (order: 0, 4096 bytes) 196<6>[ 0.087227] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) 197<6>[ 0.087561] NET: Registered protocol family 1 198<6>[ 0.087864] Trying to unpack rootfs image as initramfs... 199<6>[ 0.098882] Freeing initrd memory: 160K 200<6>[ 0.099108] PMU: registered new PMU device of type 0 201<4>[ 0.099522] clk_get: could not find clock emu_src_ck for dev s5pv210_etb_device+0x0/0x100 (etb) 202<6>[ 0.256393] wake enabled for irq 165 203<6>[ 0.256609] wake disabled for irq 165 204<6>[ 0.256985] S5PV210 ADC driver, (c) 2010 Samsung Electronics 205<6>[ 0.257394] Loaded driver for PL330 DMAC-0 s3c-pl330 206<6>[ 0.257478] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32 207<6>[ 0.257685] Loaded driver for PL330 DMAC-1 s3c-pl330 208<6>[ 0.257766] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 209<6>[ 0.257972] Loaded driver for PL330 DMAC-2 s3c-pl330 210<6>[ 0.258053] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 211<6>[ 0.265485] ashmem: initialized 212<6>[ 0.272892] ROMFS MTD (C) 2007 Red Hat, Inc. 213<7>[ 0.273093] yaffs: yaffs built Feb 2 2012 16:55:41 Installing. 214<6>[ 0.273258] msgmni has been set to 669 215<6>[ 0.274370] io scheduler noop registered 216<6>[ 0.274517] io scheduler deadline registered 217<6>[ 0.274644] io scheduler cfq registered (default) 218<6>[ 0.276079] s3cfb s3cfb: [fb2] dma: 0x4bc14000, cpu: 0xe9000000, size: 0x00a41000 219<6>[ 0.307818] FIMD src sclk = 166750000 220<6>[ 0.307905] s3cfb s3cfb: pixclock adjusted from 39019 to 41979 221<6>[ 0.308076] s3cfb s3cfb: registered successfully 222<6>[ 0.308449] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10 223<6>[ 0.315018] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10 224<6>[ 0.322846] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10 225<4>[ 0.331320] PA FB = 0x4BC14000, bits per pixel = 32 226<4>[ 0.331467] screen width=480 height=800 va=0xdbc14000 pa=0x4bc14000 227<4>[ 0.331549] xres_virtual = 480, yres_virtual = 5600, xoffset = 0, yoffset = 0 228<4>[ 0.331691] fb_size=10752000 229<4>[ 0.331772] Back frameBuffer[0].VAddr=dbd8b000 PAddr=4bd8b000 size=1536000 230<4>[ 0.331917] Back frameBuffer[1].VAddr=dbf02000 PAddr=4bf02000 size=1536000 231<4>[ 0.332013] Video Y Buffer[0].VAddr=dc079000 PAddr=4c079000 size=921600 232<4>[ 0.332158] Video Y Buffer[1].VAddr=dc15a000 PAddr=4c15a000 size=921600 233<4>[ 0.332302] Video Y Buffer[2].VAddr=dc23b000 PAddr=4c23b000 size=921600 234<4>[ 0.332383] Video UV Buffer[0].VAddr=dc31c000 PAddr=4c31c000 size=462848 235<4>[ 0.332527] Video UV Buffer[1].VAddr=dc38d000 PAddr=4c38d000 size=462848 236<4>[ 0.332607] Video UV Buffer[2].VAddr=dc3fe000 PAddr=4c3fe000 size=462848 237<6>[ 0.336607] brd: module loaded 238<6>[ 0.338560] loop: module loaded 239<6>[ 0.338750] pmem: 1 init 240<1>[ 0.338826] Unable to register pmem driver! 241<4>[ 0.338913] android_pmem: probe of android_pmem.0 failed with error -1 242<6>[ 0.339066] pmem_gpu1: 1 init 243<4>[ 0.339256] android_pmem: probe of android_pmem.1 failed with error -1 244<6>[ 0.339410] pmem_adsp: 1 init 245<4>[ 0.339578] android_pmem: probe of android_pmem.2 failed with error -1 246<6>[ 0.339721] Android kernel panic handler initialized (bind=kpanic) 247<6>[ 0.346879] Loading pn544 driver 248<6>[ 0.347033] pn544_probe : requesting IRQ 44 249<6>[ 0.347256] sec_jack_probe : Registering jack driver 250<6>[ 0.347558] wake enabled for irq 38 251<6>[ 0.348935] wake enabled for irq 167 252<6>[ 0.349453] fsa9480 7-0025: dev1: 0x4, dev2: 0x0 253<4>[ 0.349565] i2c-core: driver [fsa9480] using legacy resume method 254<6>[ 0.350949] [MODEM] bp_irq() PHONE_ACTIVE_PIN=0 255<6>[ 0.351051] wake enabled for irq 47 256<6>[ 0.351130] wake enabled for irq 43 257<6>[ 0.351857] Muxed OneNAND 512MB 1.8V 16-bit (0x50) 258<6>[ 0.351938] OneNAND version = 0x0241 259<7>[ 0.352015] Chip support all block unlock 260<7>[ 0.352154] Chip has 4KiB pagesize 261<7>[ 0.352230] Chip has cache program feature 262<6>[ 0.352323] Scanning device for bad blocks 263<6>[ 2.048537] OneNAND eraseblock 2047 is an initial bad block 264<5>[ 2.048623] Creating 7 MTD partitions on "(null)": 265<5>[ 2.048772] 0x000000000000-0x000000200000 : "bootloader" 266<5>[ 2.049504] 0x0000004c0000-0x000000600000 : "misc" 267<5>[ 2.050194] 0x000000600000-0x000000e00000 : "boot" 268<5>[ 2.050838] 0x000000e00000-0x000001600000 : "recovery" 269<5>[ 2.051399] 0x000001600000-0x00001eb80000 : "cache" 270<5>[ 2.052966] 0x00001eb80000-0x00001f900000 : "radio" 271<5>[ 2.053596] 0x00001f900000-0x00001ffc0000 : "efs" 272<6>[ 2.147053] tl2796: c0, b-93b4111a, got v 1880054, factory wants 1925000 273<6>[ 2.147141] tl2796: c1, b-97bd18b9, got v 1947186, factory wants 1939000 274<6>[ 2.147288] tl2796: c2, b-7f02c214, got v 1717805, factory wants 1568000 275<6>[ 2.291579] tl2796_probe successfully proved 276<6>[ 2.291780] PPP generic driver version 2.4.2 277<6>[ 2.291964] PPP Deflate Compression module registered 278<6>[ 2.292107] PPP BSD Compression module registered 279<6>[ 2.292752] PPP MPPE Compression module registered 280<6>[ 2.292839] NET: Registered protocol family 24 281<6>[ 2.294265] tun: Universal TUN/TAP device driver, 1.6 282<6>[ 2.294348] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 283<6>[ 3.115969] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics 284<6>[ 3.115978] s3c-udc : version 15 March 2009 (DMA Mode) 285<6>[ 3.117121] android_usb gadget: Mass Storage Function, version: 2009/09/11 286<6>[ 3.117269] android_usb gadget: Number of LUNs=1 287<6>[ 3.117351] lun0: LUN: removable file: (no medium) 288<6>[ 3.117622] android_usb gadget: android_usb ready 289<7>[ 3.132422] Registered gadget driver 'android_usb' 290<6>[ 3.132588] usbcore: registered new interface driver xpad 291<6>[ 3.132779] usbcore: registered new interface driver usb_acecad 292<6>[ 3.132860] acecad: v3.2:USB Acecad Flair tablet driver 293<6>[ 3.133040] usbcore: registered new interface driver aiptek 294<6>[ 3.133120] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) 295<6>[ 3.133264] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen 296<6>[ 3.133445] usbcore: registered new interface driver gtco 297<4>[ 3.133525] GTCO usb driver version: 2.00.0006 298<6>[ 3.133706] usbcore: registered new interface driver hanwang 299<6>[ 3.133894] usbcore: registered new interface driver kbtab 300<6>[ 3.134037] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver 301<6>[ 3.134155] usbcore: registered new interface driver wacom 302<6>[ 3.134235] wacom: v1.52:USB Wacom tablet driver 303<6>[ 3.134517] input: mxt224_ts_input as /devices/virtual/input/input0 304<6>[ 3.175205] Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171 305<6>[ 3.252886] input: gyro as /devices/virtual/input/input1 306<6>[ 3.253298] wake enabled for irq 166 307<6>[ 3.253401] wake enabled for irq 169 308<6>[ 3.253500] wake enabled for irq 170 309<6>[ 3.253643] GPIO Input Driver: Start gpio inputs for herring-keypad in interrupt mode 310<6>[ 3.253872] input: herring-keypad as /devices/virtual/input/input2 311<6>[ 3.254448] input: proximity as /devices/virtual/input/input3 312<6>[ 3.254832] input: lightsensor-level as /devices/virtual/input/input4 313<6>[ 3.255263] max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc 314<4>[ 3.255371] S3C24XX RTC, (c) 2004,2006 Simtec Electronics 315<6>[ 3.256286] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling 316<6>[ 3.256427] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling 317<6>[ 3.256579] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling 318<6>[ 3.256664] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling 319<6>[ 3.257039] using rtc device, s3c, for alarms 320<6>[ 3.257142] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 321<6>[ 3.257404] i2c /dev entries driver 322<6>[ 3.258492] lirc_dev: IR Remote Control driver registered, major 250 323<6>[ 3.258639] IR NEC protocol handler initialized 324<6>[ 3.258717] IR RC5(x) protocol handler initialized 325<6>[ 3.258796] IR RC6 protocol handler initialized 326<6>[ 3.258937] IR JVC protocol handler initialized 327<6>[ 3.259015] IR Sony protocol handler initialized 328<6>[ 3.259156] IR RC5 (streamzap) protocol handler initialized 329<6>[ 3.259235] IR LIRC bridge handler initialized 330<6>[ 3.259375] Linux video capture interface: v2.00 331<6>[ 3.259559] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics 332<6>[ 3.259566] 333<6>[ 3.262823] S3C JPEG Driver, (c) 2007 Samsung Electronics 334<6>[ 3.262910] JPEG driver for S5PV210 335<6>[ 3.264948] max17040 9-0036: MAX17040 Fuel-Gauge Ver 02 336<6>[ 3.265905] device-mapper: uevent: version 1.0.3 337<6>[ 3.266243] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com 338<6>[ 3.266415] Bluetooth: HCI UART driver ver 2.2 339<6>[ 3.266497] Bluetooth: HCI H4 protocol initialized 340<6>[ 3.266699] cpuidle: using governor ladder 341<6>[ 3.266837] cpuidle: using governor menu 342<6>[ 3.267011] sdhci: Secure Digital Host Controller Interface driver 343<6>[ 3.267090] sdhci: Copyright(c) Pierre Ossman 344<6>[ 3.267316] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz) 345<6>[ 3.267413] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz) 346<4>[ 3.267591] ------------[ cut here ]------------ 347<4>[ 3.267686] WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x54/0x110() 348<4>[ 3.267830] autorequest GPIO-195 349<4>[ 3.267906] Modules linked in: 350<4>[ 3.268053] Backtrace: 351<4>[ 3.268283] [<c003c454>] (dump_backtrace+0x0/0x10c) from [<c04b3738>] (dump_stack+0x18/0x1c) 352<4>[ 3.268366] r7:00000009 r6:00000065 r5:c01eda48 r4:e7827d98 353<4>[ 3.268803] [<c04b3720>] (dump_stack+0x0/0x1c) from [<c005ecfc>] (warn_slowpath_common+0x54/0x6c) 354<4>[ 3.268959] [<c005eca8>] (warn_slowpath_common+0x0/0x6c) from [<c005edb8>] (warn_slowpath_fmt+0x38/0x40) 355<4>[ 3.269042] r9:00000000 r8:00000001 r7:000000c3 r6:00000000 r5:c06825b8 356<4>[ 3.269471] r4:c06d40a4 357<4>[ 3.269695] [<c005ed80>] (warn_slowpath_fmt+0x0/0x40) from [<c01eda48>] (gpio_ensure_requested+0x54/0x110) 358<4>[ 3.269839] r3:000000c3 r2:c05f4204 359<4>[ 3.270066] [<c01ed9f4>] (gpio_ensure_requested+0x0/0x110) from [<c01edccc>] (gpio_direction_output+0xb8/0x158) 360<4>[ 3.270210] r7:60000013 r6:e7826000 r5:c06d40a4 r4:c06825b8 361<4>[ 3.270651] [<c01edc14>] (gpio_direction_output+0x0/0x158) from [<c004cc40>] (s5pv210_setup_sdhci0_cfg_gpio+0x100/0x114) 362<4>[ 3.270807] [<c004cb40>] (s5pv210_setup_sdhci0_cfg_gpio+0x0/0x114) from [<c04b2564>] (sdhci_s3c_probe+0x270/0x598) 363<4>[ 3.270952] r5:e7acde40 r4:00000000 364<4>[ 3.271185] [<c04b22f4>] (sdhci_s3c_probe+0x0/0x598) from [<c023ccf4>] (platform_drv_probe+0x20/0x24) 365<4>[ 3.271339] [<c023ccd4>] (platform_drv_probe+0x0/0x24) from [<c023b8b8>] (driver_probe_device+0x100/0x18c) 366<4>[ 3.271491] [<c023b7b8>] (driver_probe_device+0x0/0x18c) from [<c023b9d8>] (__driver_attach+0x94/0x98) 367<4>[ 3.271636] r9:00000000 r8:00000000 r7:00000000 r6:c0671e84 r5:c0696334 368<4>[ 3.272003] r4:c0671e50 369<4>[ 3.272228] [<c023b944>] (__driver_attach+0x0/0x98) from [<c023afd4>] (bus_for_each_dev+0x68/0x94) 370<4>[ 3.272372] r7:00000000 r6:c023b944 r5:e7827ed0 r4:c0696334 371<4>[ 3.272809] [<c023af6c>] (bus_for_each_dev+0x0/0x94) from [<c023b6a8>] (driver_attach+0x24/0x28) 372<4>[ 3.272891] r7:00000000 r6:e7ae4280 r5:c0685280 r4:c0696334 373<4>[ 3.273327] [<c023b684>] (driver_attach+0x0/0x28) from [<c023a8f8>] (bus_add_driver+0x18c/0x264) 374<4>[ 3.273480] [<c023a76c>] (bus_add_driver+0x0/0x264) from [<c023c01c>] (driver_register+0x80/0x14c) 375<4>[ 3.273634] [<c023bf9c>] (driver_register+0x0/0x14c) from [<c023d164>] (platform_driver_register+0x4c/0x60) 376<4>[ 3.273716] r9:00000000 r8:00000000 r7:00000013 r6:00000000 r5:c06a2dc0 377<4>[ 3.274145] r4:c002d090 378<4>[ 3.274372] [<c023d118>] (platform_driver_register+0x0/0x60) from [<c0020bb4>] (sdhci_s3c_init+0x14/0x1c) 379<4>[ 3.274529] [<c0020ba0>] (sdhci_s3c_init+0x0/0x1c) from [<c0032400>] (do_one_initcall+0x44/0x1a4) 380<4>[ 3.274681] [<c00323bc>] (do_one_initcall+0x0/0x1a4) from [<c00083f0>] (kernel_init+0x7c/0x120) 381<4>[ 3.274835] [<c0008374>] (kernel_init+0x0/0x120) from [<c00629b4>] (do_exit+0x0/0x734) 382<4>[ 3.274916] r5:c0008374 r4:00000000 383<4>[ 3.275217] ---[ end trace def72bfc088655f8 ]--- 384<6>[ 3.275386] mmc0: no vmmc regulator found 385<6>[ 3.275632] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA 386<6>[ 3.275844] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz) 387<6>[ 3.276026] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz) 388<6>[ 3.276146] mmc1: no vmmc regulator found 389<6>[ 3.276378] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA 390<6>[ 3.276504] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz) 391<6>[ 3.276661] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz) 392<6>[ 3.276774] mmc2: no vmmc regulator found 393<6>[ 3.276997] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA 394<6>[ 3.279049] usbcore: registered new interface driver usbhid 395<6>[ 3.279195] usbhid: USB HID core driver 396<6>[ 3.279552] logger: created 256K log 'log_main' 397<6>[ 3.279773] logger: created 256K log 'log_events' 398<6>[ 3.279948] logger: created 256K log 'log_radio' 399<6>[ 3.280085] logger: created 256K log 'log_system' 400<6>[ 3.281163] WM8994 Audio Codec 0.1 401<6>[ 3.296362] s3c_idma_preallocate_buffer: VA-e8080000 PA-C0000000 163840bytes 402<6>[ 3.296789] asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok 403<6>[ 3.297182] ALSA device list: 404<6>[ 3.297262] #0: smdkc110 405<6>[ 3.297403] oprofile: hardware counters not available 406<6>[ 3.297480] oprofile: using timer interrupt. 407<6>[ 3.297856] GACT probability NOT on 408<6>[ 3.297943] Mirror/redirect action on 409<6>[ 3.298023] u32 classifier 410<6>[ 3.298098] Actions configured 411<6>[ 3.298239] Netfilter messages via NETLINK v0.30. 412<6>[ 3.298369] nf_conntrack version 0.5.0 (5355 buckets, 21420 max) 413<6>[ 3.299275] ctnetlink v0.93: registering with nfnetlink. 414<6>[ 3.299434] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 415<6>[ 3.299578] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. 416<6>[ 3.299851] xt_time: kernel timezone is -0000 417<6>[ 3.301520] ip_tables: (C) 2000-2006 Netfilter Core Team 418<6>[ 3.301830] arp_tables: (C) 2002 David S. Miller 419<6>[ 3.302042] TCP cubic registered 420<6>[ 3.302977] NET: Registered protocol family 10 421<6>[ 3.311150] Mobile IPv6 422<6>[ 3.311257] ip6_tables: (C) 2000-2006 Netfilter Core Team 423<6>[ 3.311671] IPv6 over IPv4 tunneling driver 424<6>[ 3.316332] NET: Registered protocol family 17 425<6>[ 3.317550] NET: Registered protocol family 15 426<6>[ 3.317732] Bluetooth: RFCOMM TTY layer initialized 427<6>[ 3.319884] Bluetooth: RFCOMM socket layer initialized 428<6>[ 3.320028] Bluetooth: RFCOMM ver 1.11 429<6>[ 3.320108] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 430<6>[ 3.320251] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 431<6>[ 3.320443] NET: Registered protocol family 35 432<6>[ 3.320727] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 433<6>[ 3.320888] ThumbEE CPU extension supported. 434<6>[ 3.321284] s5pv210_cpufreq_init: S5PV210 cpu-freq driver 435<6>[ 3.326750] regulator_init_complete: pd_mfc_supply: disabling 436<6>[ 3.326903] regulator_init_complete: pd_tv_supply: disabling 437<6>[ 3.326986] regulator_init_complete: pd_cam_supply: disabling 438<6>[ 3.382337] cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0xa, rev2 = 0x9 439<6>[ 3.384057] input: cypress-touchkey as /devices/virtual/input/input5 440<6>[ 3.387684] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling 441<6>[ 3.388860] s3c-rtc s3c2410-rtc: setting system clock to 2017-09-12 22:51:21 UTC (1505256681) 442<6>[ 3.393219] FIMC0 registered successfully 443<6>[ 3.396685] FIMC1 registered successfully 444<6>[ 3.399860] FIMC2 registered successfully 445<6>[ 3.401390] max8998_charger_probe : MAX8998 Charger Driver Loading 446<6>[ 3.407445] max8998_charger_probe : pmic interrupt registered 447<6>[ 3.413022] wake enabled for irq 39 448<6>[ 3.415340] Freeing init memory: 168K 449<4>[ 3.417835] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. 450<6>[ 3.479198] keychord: using input dev herring-keypad for fevent 451<6>[ 3.495102] yaffs: dev is 32505860 name is "mtdblock4" rw 452<6>[ 3.495225] yaffs: passed flags "" 453<7>[ 3.495318] yaffs: Attempting MTD mount of 31.4,"mtdblock4" 454<7>[ 3.505341] yaffs: yaffs_read_super: is_checkpointed 0 455<6>[ 3.505685] yaffs: dev is 32505862 name is "mtdblock6" rw 456<6>[ 3.505838] yaffs: passed flags "" 457<7>[ 3.506104] yaffs: Attempting MTD mount of 31.6,"mtdblock6" 458<7>[ 3.558297] yaffs: yaffs_read_super: is_checkpointed 0 459<6>[ 3.617878] mmc0: new high speed MMC card at address 0001 460<6>[ 3.620641] mmcblk0: mmc0:0001 SEM16G 14.8 GiB 461<6>[ 3.622287] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB 462<6>[ 3.623403] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB 463<6>[ 3.644810] mmcblk0: p1 p2 p3 464<6>[ 3.662875] mmcblk0boot1: unknown partition table 465<6>[ 3.680717] mmcblk0boot0: unknown partition table 466<6>[ 3.688224] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) 467<6>[ 3.712638] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: nomblk_io_submit 468<3>[ 3.914605] android_usb: already disabled 469<6>[ 3.914933] adb_bind_config 470<6>[ 3.916490] warning: `adbd' uses 32-bit capabilities (legacy support in use) 471<6>[ 3.918432] adb_open 472<6>[ 3.922109] android_work: did not send uevent (0 0 (null)) 473<7>[ 4.066931] onenand_wait: correctable ECC error = 0x5555 474<7>[ 4.067431] onenand_wait: correctable ECC error = 0x5555 475<7>[ 4.068378] onenand_wait: correctable ECC error = 0x5555 476<7>[ 4.068856] onenand_wait: correctable ECC error = 0x5555 477<7>[ 4.071305] onenand_wait: correctable ECC error = 0x5555 478<7>[ 4.074539] onenand_wait: correctable ECC error = 0x5555 479<7>[ 4.074739] onenand_wait: correctable ECC error = 0x5555 480<7>[ 4.074934] onenand_wait: correctable ECC error = 0x5555 481<7>[ 4.076181] onenand_wait: correctable ECC error = 0x5555 482<7>[ 4.079709] onenand_wait: correctable ECC error = 0x5555 483<7>[ 4.079986] onenand_wait: correctable ECC error = 0x5555 484<7>[ 4.081376] onenand_wait: correctable ECC error = 0x5555 485<7>[ 4.083020] onenand_wait: correctable ECC error = 0x5555 486<6>[ 4.085416] android_work: sent uevent USB_STATE=CONNECTED 487<7>[ 4.087082] onenand_wait: correctable ECC error = 0x5555 488<7>[ 4.089523] onenand_wait: correctable ECC error = 0x5555 489<7>[ 4.092174] onenand_wait: correctable ECC error = 0x5555 490<7>[ 4.092881] onenand_wait: correctable ECC error = 0x5555 491<7>[ 4.093367] onenand_wait: correctable ECC error = 0x5555 492<7>[ 4.094340] onenand_wait: correctable ECC error = 0x5555 493<7>[ 4.094725] onenand_wait: correctable ECC error = 0x5555 494<7>[ 4.095365] onenand_wait: correctable ECC error = 0x5555 495<7>[ 4.096305] onenand_wait: correctable ECC error = 0x5555 496<7>[ 4.096835] onenand_wait: correctable ECC error = 0x5555 497<7>[ 4.099751] onenand_wait: correctable ECC error = 0x5555 498<7>[ 4.100651] onenand_wait: correctable ECC error = 0x5555 499<7>[ 4.103779] onenand_wait: correctable ECC error = 0x5555 500<7>[ 4.104064] onenand_wait: correctable ECC error = 0x5555 501<7>[ 4.105150] onenand_wait: correctable ECC error = 0x5555 502<7>[ 4.106705] onenand_wait: correctable ECC error = 0x5555 503<7>[ 4.107014] onenand_wait: correctable ECC error = 0x5555 504<7>[ 4.107608] onenand_wait: correctable ECC error = 0x5555 505<7>[ 4.110450] onenand_wait: correctable ECC error = 0x5555 506<7>[ 4.111255] onenand_wait: correctable ECC error = 0x5555 507<7>[ 4.111668] onenand_wait: correctable ECC error = 0x5555 508<7>[ 4.115268] onenand_wait: correctable ECC error = 0x5555 509<7>[ 4.116891] onenand_wait: correctable ECC error = 0x5555 510<7>[ 4.117385] onenand_wait: correctable ECC error = 0x5555 511<7>[ 4.118692] onenand_wait: correctable ECC error = 0x5555 512<7>[ 4.119222] onenand_wait: correctable ECC error = 0x5555 513<7>[ 4.122743] onenand_wait: correctable ECC error = 0x5555 514<7>[ 4.132697] onenand_wait: correctable ECC error = 0x5555 515<7>[ 4.133825] onenand_wait: correctable ECC error = 0x5555 516<7>[ 4.138619] onenand_wait: correctable ECC error = 0x5555 517<7>[ 4.138995] onenand_wait: correctable ECC error = 0x5555 518<7>[ 4.140519] onenand_wait: correctable ECC error = 0x5555 519<7>[ 4.141322] onenand_wait: correctable ECC error = 0x5555 520<7>[ 4.141733] onenand_wait: correctable ECC error = 0x5555 521<7>[ 4.142423] onenand_wait: correctable ECC error = 0x5555 522<7>[ 4.145802] onenand_wait: correctable ECC error = 0x5555 523<7>[ 4.146509] onenand_wait: correctable ECC error = 0x5555 524<7>[ 4.146706] onenand_wait: correctable ECC error = 0x5555 525<7>[ 4.151794] onenand_wait: correctable ECC error = 0x5555 526<7>[ 4.152922] onenand_wait: correctable ECC error = 0x5555 527<6>[ 4.156161] android_usb gadget: high speed config #1: android 528<6>[ 4.156363] android_work: sent uevent USB_STATE=CONFIGURED 529<7>[ 4.161343] onenand_wait: correctable ECC error = 0x5555 530<7>[ 4.162840] onenand_wait: correctable ECC error = 0x5555 531<7>[ 4.165762] onenand_wait: correctable ECC error = 0x5555 532<7>[ 4.166404] onenand_wait: correctable ECC error = 0x5555 533<7>[ 4.182673] onenand_wait: correctable ECC error = 0x5555 534<7>[ 4.184789] onenand_wait: correctable ECC error = 0x5555 535<7>[ 4.186320] onenand_wait: correctable ECC error = 0x5555 536<7>[ 4.189326] onenand_wait: correctable ECC error = 0x5555 537<7>[ 4.195019] onenand_wait: correctable ECC error = 0x5555 538<7>[ 4.197580] onenand_wait: correctable ECC error = 0x5555 539<7>[ 4.197795] onenand_wait: correctable ECC error = 0x5555 540<7>[ 4.198254] onenand_wait: correctable ECC error = 0x5555 541<7>[ 4.198558] onenand_wait: correctable ECC error = 0x5555 542<7>[ 4.198923] onenand_wait: correctable ECC error = 0x5555 543<7>[ 4.199441] onenand_wait: correctable ECC error = 0x5555 544<7>[ 4.199695] onenand_wait: correctable ECC error = 0x5555 545<7>[ 4.200105] onenand_wait: correctable ECC error = 0x5555 546<7>[ 4.200840] onenand_wait: correctable ECC error = 0x5555 547<7>[ 4.209862] onenand_wait: correctable ECC error = 0x5555 548<7>[ 4.214959] onenand_wait: correctable ECC error = 0x5555 549<7>[ 4.215562] onenand_wait: correctable ECC error = 0x5555 550<7>[ 4.216206] onenand_wait: correctable ECC error = 0x5555 551<7>[ 4.219625] onenand_wait: correctable ECC error = 0x5555 552<7>[ 4.220267] onenand_wait: correctable ECC error = 0x5555 553<7>[ 4.221747] onenand_wait: correctable ECC error = 0x5555 554<7>[ 4.221930] onenand_wait: correctable ECC error = 0x5555 555<7>[ 4.222266] onenand_wait: correctable ECC error = 0x5555 556<7>[ 4.222870] onenand_wait: correctable ECC error = 0x5555 557<7>[ 4.223538] onenand_wait: correctable ECC error = 0x5555 558<7>[ 4.225749] onenand_wait: correctable ECC error = 0x5555 559<7>[ 4.228328] onenand_wait: correctable ECC error = 0x5555 560<7>[ 4.229312] onenand_wait: correctable ECC error = 0x5555 561<7>[ 4.229710] onenand_wait: correctable ECC error = 0x5555 562<7>[ 4.229997] onenand_wait: correctable ECC error = 0x5555 563<7>[ 4.230605] onenand_wait: correctable ECC error = 0x5555 564<7>[ 4.234382] onenand_wait: correctable ECC error = 0x5555 565<7>[ 4.234883] onenand_wait: correctable ECC error = 0x5555 566<7>[ 4.235786] onenand_wait: correctable ECC error = 0x5555 567<7>[ 4.244286] onenand_wait: correctable ECC error = 0x5555 568<7>[ 4.247527] onenand_wait: correctable ECC error = 0x5555 569<6>[ 4.251049] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [529, drivers/gpu/pvr/s5pc110/sysconfig.c] 570<7>[ 4.253046] onenand_wait: correctable ECC error = 0x5555 571<7>[ 4.253812] onenand_wait: correctable ECC error = 0x5555 572<7>[ 4.254521] onenand_wait: correctable ECC error = 0x5555 573<7>[ 4.254753] onenand_wait: correctable ECC error = 0x5555 574<7>[ 4.255144] onenand_wait: correctable ECC error = 0x5555 575<7>[ 4.256427] onenand_wait: correctable ECC error = 0x5555 576<7>[ 4.269687] onenand_wait: correctable ECC error = 0x5555 577<7>[ 4.270237] onenand_wait: correctable ECC error = 0x5555 578<7>[ 4.271811] onenand_wait: correctable ECC error = 0x5555 579<7>[ 4.272608] onenand_wait: correctable ECC error = 0x5555 580<7>[ 4.273162] onenand_wait: correctable ECC error = 0x5555 581<7>[ 4.273777] onenand_wait: correctable ECC error = 0x5555 582<7>[ 4.274631] onenand_wait: correctable ECC error = 0x5555 583<7>[ 4.275224] onenand_wait: correctable ECC error = 0x5555 584<7>[ 4.275868] onenand_wait: correctable ECC error = 0x5555 585<7>[ 4.276188] onenand_wait: correctable ECC error = 0x5555 586<7>[ 4.277185] onenand_wait: correctable ECC error = 0x5555 587<7>[ 4.277884] onenand_wait: correctable ECC error = 0x5555 588<7>[ 4.278846] onenand_wait: correctable ECC error = 0x5555 589<7>[ 4.279125] onenand_wait: correctable ECC error = 0x5555 590<7>[ 4.280370] onenand_wait: correctable ECC error = 0x5555 591<7>[ 4.281086] onenand_wait: correctable ECC error = 0x5555 592<7>[ 4.282184] onenand_wait: correctable ECC error = 0x5555 593<7>[ 4.282626] onenand_wait: correctable ECC error = 0x5555 594<7>[ 4.283218] onenand_wait: correctable ECC error = 0x5555 595<7>[ 4.300365] onenand_wait: correctable ECC error = 0x5555 596<7>[ 4.300976] onenand_wait: correctable ECC error = 0x5555 597<7>[ 4.301849] onenand_wait: correctable ECC error = 0x5555 598<7>[ 4.302900] onenand_wait: correctable ECC error = 0x5555 599<7>[ 4.303141] onenand_wait: correctable ECC error = 0x5555 600<7>[ 4.304099] onenand_wait: correctable ECC error = 0x5555 601<7>[ 4.304329] onenand_wait: correctable ECC error = 0x5555 602<7>[ 4.304728] onenand_wait: correctable ECC error = 0x5555 603<7>[ 4.305802] onenand_wait: correctable ECC error = 0x5555 604<7>[ 4.309700] onenand_wait: correctable ECC error = 0x5555 605<7>[ 4.310684] onenand_wait: correctable ECC error = 0x5555 606<7>[ 4.310980] onenand_wait: correctable ECC error = 0x5555 607<7>[ 4.311349] onenand_wait: correctable ECC error = 0x5555 608<7>[ 4.311746] onenand_wait: correctable ECC error = 0x5555 609<7>[ 4.312036] onenand_wait: correctable ECC error = 0x5555 610<7>[ 4.312471] onenand_wait: correctable ECC error = 0x5555 611<7>[ 4.313820] onenand_wait: correctable ECC error = 0x5555 612<7>[ 4.314160] onenand_wait: correctable ECC error = 0x5555 613<7>[ 4.314439] onenand_wait: correctable ECC error = 0x5555 614<7>[ 4.314994] onenand_wait: correctable ECC error = 0x5555 615<7>[ 4.315287] onenand_wait: correctable ECC error = 0x5555 616<7>[ 4.316152] onenand_wait: correctable ECC error = 0x5555 617<7>[ 4.317084] onenand_wait: correctable ECC error = 0x5555 618<7>[ 4.317526] onenand_wait: correctable ECC error = 0x5555 619<7>[ 4.317915] onenand_wait: correctable ECC error = 0x5555 620<7>[ 4.318461] onenand_wait: correctable ECC error = 0x5555 621<7>[ 4.323019] onenand_wait: correctable ECC error = 0x5555 622<7>[ 4.323378] onenand_wait: correctable ECC error = 0x5555 623<7>[ 4.325278] onenand_wait: correctable ECC error = 0x5555 624<7>[ 4.327520] onenand_wait: correctable ECC error = 0x5555 625<7>[ 4.327755] onenand_wait: correctable ECC error = 0x5555 626<7>[ 4.328576] onenand_wait: correctable ECC error = 0x5555 627<6>[ 4.329424] [MODEM] modem_reset() 628<7>[ 4.336289] onenand_wait: correctable ECC error = 0x5555 629<7>[ 4.336630] onenand_wait: correctable ECC error = 0x5555 630<7>[ 4.337141] onenand_wait: correctable ECC error = 0x5555 631<7>[ 4.337580] onenand_wait: correctable ECC error = 0x5555 632<7>[ 4.338274] onenand_wait: correctable ECC error = 0x5555 633<7>[ 4.340298] onenand_wait: correctable ECC error = 0x5555 634<6>[ 4.529738] [MODEM] bp_irq() PHONE_ACTIVE_PIN=1 635<6>[ 4.990939] modemctl_ioctl() 0 636<6>[ 5.329775] s3cfb s3cfb: [fb0] dma: 0x4b7af000, cpu: 0xeb800000, size: 0x00465000 637<6>[ 5.391585] [MODEM] modem_start() normal 638<6>[ 5.391875] [MODEM] modem_start() DONE 639<6>[ 5.392023] modemctl_ioctl() 0 640<6>[ 14.956155] wake enabled for irq 34 641<6>[ 14.964007] input: compass as /devices/virtual/input/input6 642<6>[ 15.027839] wake disabled for irq 34 643<6>[ 20.604561] request_suspend_state: wakeup (3->0) at 20594375241 (2017-09-12 22:51:38.714914007 UTC) 644<6>[ 20.881401] wake enabled for irq 165 645<6>[ 21.250662] acc_open 646<6>[ 21.250803] acc_release 647<6>[ 23.922298] pn544_dev_ioctl power on 648<6>[ 23.947776] pn544_dev_ioctl power off 649<6>[ 24.014196] pn544_dev_ioctl power on 650<6>[ 25.873966] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling