1# Settings used by Prodrive to build coreboot for the Hermes but with x86_64 enabled 2CONFIG_VENDOR_PRODRIVE=y 3CONFIG_BOARD_PRODRIVE_HERMES=y 4CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Prodrive Technologies B.V." 5CONFIG_POST_IO=y 6CONFIG_USE_LEGACY_8254_TIMER=y 7CONFIG_HERMES_USES_SPS_FIRMWARE=y 8CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y 9CONFIG_SMMSTORE=y 10CONFIG_SMMSTORE_V2=y 11CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3=y 12CONFIG_POST_DEVICE_LPC=y 13CONFIG_MAINBOARD_SERIAL_NUMBER="N/A" 14CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS=y 15CONFIG_PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS=36 16CONFIG_RUN_FSP_GOP=y 17CONFIG_USE_X86_64_SUPPORT=y 18