1 /* SPDX-License-Identifier: GPL-2.0-only */
2
3 #include <console/console.h>
4 #include <device/device.h>
5 #include <device/pci.h>
6 #include <device/pci_ids.h>
7 #include <device/pci_ops.h>
8 #include <option.h>
9 #include <pc80/isa-dma.h>
10 #include <pc80/i8259.h>
11 #include <arch/io.h>
12 #include <arch/ioapic.h>
13 #include <acpi/acpi.h>
14 #include <acpi/acpigen.h>
15 #include <cpu/x86/smm.h>
16 #include <string.h>
17 #include "chip.h"
18 #include "pch.h"
19 #include <northbridge/intel/sandybridge/sandybridge.h>
20 #include <southbridge/intel/common/pciehp.h>
21 #include <southbridge/intel/common/acpi_pirq_gen.h>
22 #include <southbridge/intel/common/pmutil.h>
23 #include <southbridge/intel/common/rcba_pirq.h>
24 #include <southbridge/intel/common/rtc.h>
25 #include <southbridge/intel/common/spi.h>
26 #include <types.h>
27
28 #define NMI_OFF 0
29
30 typedef struct southbridge_intel_bd82x6x_config config_t;
31
32 /**
33 * Set miscellaneous static southbridge features.
34 *
35 * @param dev PCI device with I/O APIC control registers
36 */
pch_enable_ioapic(struct device * dev)37 static void pch_enable_ioapic(struct device *dev)
38 {
39 /* Assign unique bus/dev/fn for I/O APIC */
40 pci_write_config16(dev, LPC_IBDF,
41 PCH_IOAPIC_PCI_BUS << 8 | PCH_IOAPIC_PCI_SLOT << 3);
42
43 /* affirm full set of redirection table entries ("write once") */
44 ioapic_lock_max_vectors(IO_APIC_ADDR);
45
46 register_new_ioapic_gsi0(IO_APIC_ADDR);
47 }
48
pch_enable_serial_irqs(struct device * dev)49 static void pch_enable_serial_irqs(struct device *dev)
50 {
51 /* Set packet length and toggle silent mode bit for one frame. */
52 pci_write_config8(dev, SERIRQ_CNTL,
53 (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0));
54 #if !CONFIG(SERIRQ_CONTINUOUS_MODE)
55 pci_write_config8(dev, SERIRQ_CNTL,
56 (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0));
57 #endif
58 }
59
60 /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
61 * 0x00 - 0000 = Reserved
62 * 0x01 - 0001 = Reserved
63 * 0x02 - 0010 = Reserved
64 * 0x03 - 0011 = IRQ3
65 * 0x04 - 0100 = IRQ4
66 * 0x05 - 0101 = IRQ5
67 * 0x06 - 0110 = IRQ6
68 * 0x07 - 0111 = IRQ7
69 * 0x08 - 1000 = Reserved
70 * 0x09 - 1001 = IRQ9
71 * 0x0A - 1010 = IRQ10
72 * 0x0B - 1011 = IRQ11
73 * 0x0C - 1100 = IRQ12
74 * 0x0D - 1101 = Reserved
75 * 0x0E - 1110 = IRQ14
76 * 0x0F - 1111 = IRQ15
77 * PIRQ[n]_ROUT[7] - PIRQ Routing Control
78 * 0x80 - The PIRQ is not routed.
79 */
80
pch_pirq_init(struct device * dev)81 static void pch_pirq_init(struct device *dev)
82 {
83 struct device *irq_dev;
84 /* Interrupt 11 is not used by legacy devices and so can always be used for
85 PCI interrupts. Full legacy IRQ routing is complicated and hard to
86 get right. Fortunately all modern OS use MSI and so it's not that big of
87 an issue anyway. Still we have to provide a reasonable default. Using
88 interrupt 11 for it everywhere is a working default. ACPI-aware OS can
89 move it to any interrupt and others will just leave them at default.
90 */
91 const u8 pirq_routing = 11;
92
93 pci_write_config8(dev, PIRQA_ROUT, pirq_routing);
94 pci_write_config8(dev, PIRQB_ROUT, pirq_routing);
95 pci_write_config8(dev, PIRQC_ROUT, pirq_routing);
96 pci_write_config8(dev, PIRQD_ROUT, pirq_routing);
97
98 pci_write_config8(dev, PIRQE_ROUT, pirq_routing);
99 pci_write_config8(dev, PIRQF_ROUT, pirq_routing);
100 pci_write_config8(dev, PIRQG_ROUT, pirq_routing);
101 pci_write_config8(dev, PIRQH_ROUT, pirq_routing);
102
103 for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
104 u8 int_pin=0;
105
106 if (!is_enabled_pci(irq_dev))
107 continue;
108
109 int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
110
111 if (int_pin == 0)
112 continue;
113
114 pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, pirq_routing);
115 }
116 }
117
pch_gpi_routing(struct device * dev)118 static void pch_gpi_routing(struct device *dev)
119 {
120 /* Get the chip configuration */
121 config_t *config = dev->chip_info;
122 u32 reg32 = 0;
123
124 /* An array would be much nicer here, or some
125 * other method of doing this.
126 */
127 reg32 |= (config->gpi0_routing & 0x03) << 0;
128 reg32 |= (config->gpi1_routing & 0x03) << 2;
129 reg32 |= (config->gpi2_routing & 0x03) << 4;
130 reg32 |= (config->gpi3_routing & 0x03) << 6;
131 reg32 |= (config->gpi4_routing & 0x03) << 8;
132 reg32 |= (config->gpi5_routing & 0x03) << 10;
133 reg32 |= (config->gpi6_routing & 0x03) << 12;
134 reg32 |= (config->gpi7_routing & 0x03) << 14;
135 reg32 |= (config->gpi8_routing & 0x03) << 16;
136 reg32 |= (config->gpi9_routing & 0x03) << 18;
137 reg32 |= (config->gpi10_routing & 0x03) << 20;
138 reg32 |= (config->gpi11_routing & 0x03) << 22;
139 reg32 |= (config->gpi12_routing & 0x03) << 24;
140 reg32 |= (config->gpi13_routing & 0x03) << 26;
141 reg32 |= (config->gpi14_routing & 0x03) << 28;
142 reg32 |= (config->gpi15_routing & 0x03) << 30;
143
144 pci_write_config32(dev, GPIO_ROUT, reg32);
145 }
146
pch_power_options(struct device * dev)147 static void pch_power_options(struct device *dev)
148 {
149 u8 reg8;
150 u16 reg16, pmbase;
151 u32 reg32;
152 const char *state;
153 /* Get the chip configuration */
154 config_t *config = dev->chip_info;
155
156 /* Which state do we want to goto after g3 (power restored)?
157 * 0 == S0 Full On
158 * 1 == S5 Soft Off
159 *
160 * If the option is not existent (Laptops), use Kconfig setting.
161 */
162 const unsigned int pwr_on = get_uint_option("power_on_after_fail",
163 CONFIG_MAINBOARD_POWER_FAILURE_STATE);
164
165 reg16 = pci_read_config16(dev, GEN_PMCON_3);
166 reg16 &= 0xfffe;
167 switch (pwr_on) {
168 case MAINBOARD_POWER_OFF:
169 reg16 |= 1;
170 state = "off";
171 break;
172 case MAINBOARD_POWER_ON:
173 reg16 &= ~1;
174 state = "on";
175 break;
176 case MAINBOARD_POWER_KEEP:
177 reg16 &= ~1;
178 state = "state keep";
179 break;
180 default:
181 state = "undefined";
182 }
183
184 reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */
185 reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */
186
187 reg16 &= ~(1 << 10);
188 reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */
189
190 reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */
191
192 pci_write_config16(dev, GEN_PMCON_3, reg16);
193 printk(BIOS_INFO, "Set power %s after power failure.\n", state);
194
195 /* Set up NMI on errors. */
196 reg8 = inb(0x61);
197 reg8 &= 0x0f; /* Higher Nibble must be 0 */
198 reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */
199 // reg8 &= ~(1 << 2); /* PCI SERR# Enable */
200 reg8 |= (1 << 2); /* PCI SERR# Disable for now */
201 outb(reg8, 0x61);
202
203 reg8 = inb(0x70);
204 const unsigned int nmi_option = get_uint_option("nmi", NMI_OFF);
205 if (nmi_option) {
206 printk(BIOS_INFO, "NMI sources enabled.\n");
207 reg8 &= ~(1 << 7); /* Set NMI. */
208 } else {
209 printk(BIOS_INFO, "NMI sources disabled.\n");
210 reg8 |= (1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */
211 }
212 outb(reg8, 0x70);
213
214 /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */
215 reg16 = pci_read_config16(dev, GEN_PMCON_1);
216 reg16 &= ~(3 << 0); // SMI# rate 1 minute
217 reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME
218 if (CONFIG(DEBUG_PERIODIC_SMI))
219 reg16 |= (3 << 0); // Periodic SMI every 8s
220 pci_write_config16(dev, GEN_PMCON_1, reg16);
221
222 // Set the board's GPI routing.
223 pch_gpi_routing(dev);
224
225 pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
226
227 outl(config->gpe0_en, pmbase + GPE0_EN);
228 outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN);
229
230 /* Set up power management block and determine sleep mode */
231 reg32 = inl(pmbase + 0x04); // PM1_CNT
232 reg32 &= ~(7 << 10); // SLP_TYP
233 reg32 |= (1 << 0); // SCI_EN
234 outl(reg32, pmbase + 0x04);
235
236 /* Clear magic status bits to prevent unexpected wake */
237 reg32 = RCBA32(PRSTS);
238 reg32 |= (1 << 4)|(1 << 5)|(1 << 0);
239 RCBA32(PRSTS) = reg32;
240
241 reg32 = RCBA32(0x3f02);
242 reg32 &= ~0xf;
243 RCBA32(0x3f02) = reg32;
244 }
245
246 /* CougarPoint PCH Power Management init */
cpt_pm_init(struct device * dev)247 static void cpt_pm_init(struct device *dev)
248 {
249 printk(BIOS_DEBUG, "CougarPoint PM init\n");
250 pci_write_config8(dev, 0xa9, 0x47);
251 RCBA32_AND_OR(CIR30, ~0U, (1 << 6)|(1 << 0));
252 RCBA32_AND_OR(CIR5, ~0U, (1 << 0));
253 RCBA16_AND_OR(CIR3, ~0U, (1 << 13)|(1 << 14));
254 RCBA16_AND_OR(CIR2, ~0U, (1 << 14));
255 RCBA32(DMC) = 0xc0388400;
256 RCBA32_AND_OR(CIR6, ~0U, (1 << 5)|(1 << 18));
257 RCBA32_AND_OR(CIR9, ~0U, (1 << 15)|(1 << 1));
258 RCBA32_AND_OR(CIR7, ~0x1f, 0xf);
259 RCBA32(PM_CFG) = 0x050f0000;
260 RCBA32(CIR8) = 0x04000000;
261 RCBA32_AND_OR(CIR10, ~0U, 0xfffff);
262 RCBA32_AND_OR(CIR11, ~0U, (1 << 1));
263 RCBA32(CIR12) = 0x0001c000;
264 RCBA32(CIR14) = 0x00061100;
265 RCBA32(CIR15) = 0x7f8fdfff;
266 RCBA32(CIR13) = 0x000003fc;
267 RCBA32(CIR16) = 0x00001000;
268 RCBA32(CIR18) = 0x0001c000;
269 RCBA32(CIR17) = 0x00000800;
270 RCBA32(CIR23) = 0x00001000;
271 RCBA32(CIR19) = 0x00093900;
272 RCBA32(CIR20) = 0x24653002;
273 RCBA32(CIR21) = 0x062108fe;
274 RCBA32_AND_OR(CIR22, 0xf000f000, 0x00670060);
275 RCBA32(CIR24) = 0x01010000;
276 RCBA32(CIR25) = 0x01010404;
277 RCBA32(CIR27) = 0x01041041;
278 RCBA32_AND_OR(CIR28, ~0x0000ffff, 0x00001001);
279 RCBA32_AND_OR(CIR28, ~0UL, (1 << 24)); /* SATA 2/3 disabled */
280 RCBA32_AND_OR(CIR29, ~0UL, (1 << 0)); /* SATA 4/5 disabled */
281 RCBA32(CIR26) = 0x00000001;
282 RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c);
283 RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20);
284 RCBA32(PMSYNC_CFG) = 0;
285 RCBA32_AND_OR(0x21b0, ~0UL, 0xf);
286 }
287
288 /* PantherPoint PCH Power Management init */
ppt_pm_init(struct device * dev)289 static void ppt_pm_init(struct device *dev)
290 {
291 printk(BIOS_DEBUG, "PantherPoint PM init\n");
292 pci_write_config8(dev, 0xa9, 0x47);
293 RCBA32_AND_OR(CIR30, ~0UL, (1 << 0));
294 RCBA32_AND_OR(CIR5, ~0UL, (1 << 0));
295 RCBA16_AND_OR(CIR3, ~0UL, (1 << 13)|(1 << 14));
296 RCBA16_AND_OR(CIR2, ~0UL, (1 << 14));
297 RCBA32(DMC) = 0xc03b8400;
298 RCBA32_AND_OR(CIR6, ~0UL, (1 << 5)|(1 << 18));
299 RCBA32_AND_OR(CIR9, ~0UL, (1 << 15)|(1 << 1));
300 RCBA32_AND_OR(CIR7, ~0x1f, 0xf);
301 RCBA32(PM_CFG) = 0x054f0000;
302 RCBA32(CIR8) = 0x04000000;
303 RCBA32_AND_OR(CIR10, ~0UL, 0xfffff);
304 RCBA32_AND_OR(CIR11, ~0UL, (1 << 1)|(1 << 0));
305 RCBA32(CIR12) = 0x0001c000;
306 RCBA32(CIR14) = 0x00061100;
307 RCBA32(CIR15) = 0x7f8fdfff;
308 RCBA32(CIR13) = 0x000003fd;
309 RCBA32(CIR16) = 0x00001000;
310 RCBA32(CIR18) = 0x0001c000;
311 RCBA32(CIR17) = 0x00000800;
312 RCBA32(CIR23) = 0x00001000;
313 RCBA32(CIR19) = 0x00093900;
314 RCBA32(CIR20) = 0x24653002;
315 RCBA32(CIR21) = 0x067388fe;
316 RCBA32_AND_OR(CIR22, 0xf000f000, 0x00670060);
317 RCBA32(CIR24) = 0x01010000;
318 RCBA32(CIR25) = 0x01010404;
319 RCBA32(CIR27) = 0x01040000;
320 RCBA32_AND_OR(CIR28, ~0x0000ffff, 0x00001001);
321 RCBA32_AND_OR(CIR28, ~0UL, (1 << 24)); /* SATA 2/3 disabled */
322 RCBA32_AND_OR(CIR29, ~0UL, (1 << 0)); /* SATA 4/5 disabled */
323 RCBA32(CIR26) = 0x00000001;
324 RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c);
325 RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20);
326 RCBA32_AND_OR(0x33a4, ~0UL, (1 << 0));
327 RCBA32(PMSYNC_CFG) = 0;
328 RCBA32_AND_OR(0x21b0, ~0UL, 0xf);
329 }
330
enable_hpet(struct device * const dev)331 static void enable_hpet(struct device *const dev)
332 {
333 u32 reg32;
334 size_t i;
335
336 /* Assign unique bus/dev/fn for each HPET */
337 for (i = 0; i < 8; ++i)
338 pci_write_config16(dev, LPC_HnBDF(i),
339 PCH_HPET_PCI_BUS << 8 | PCH_HPET_PCI_SLOT << 3 | i);
340
341 /* Move HPET to default address 0xfed00000 and enable it */
342 reg32 = RCBA32(HPTC);
343 reg32 |= (1 << 7); // HPET Address Enable
344 reg32 &= ~(3 << 0);
345 RCBA32(HPTC) = reg32;
346 }
347
enable_clock_gating(struct device * dev)348 static void enable_clock_gating(struct device *dev)
349 {
350 u32 reg32;
351 u16 reg16;
352
353 RCBA32_AND_OR(DMIC, ~0UL, 0xf);
354
355 reg16 = pci_read_config16(dev, GEN_PMCON_1);
356 reg16 &= ~(3 << 2); /* Clear CLKRUN bits for mobile and desktop */
357 if (get_platform_type() == PLATFORM_MOBILE)
358 reg16 |= (1 << 2); /* CLKRUN_EN for mobile */
359 else if (get_platform_type() == PLATFORM_DESKTOP_SERVER)
360 reg16 |= (1 << 3); /* PSEUDO_CLKRUN_EN for desktop */
361 reg16 |= (1 << 11);
362 pci_write_config16(dev, GEN_PMCON_1, reg16);
363
364 pch_iobp_update(0xEB007F07, ~0U, (1 << 31));
365 pch_iobp_update(0xEB004000, ~0U, (1 << 7));
366 pch_iobp_update(0xEC007F07, ~0U, (1 << 31));
367 pch_iobp_update(0xEC004000, ~0U, (1 << 7));
368
369 reg32 = RCBA32(CG);
370 reg32 |= (1 << 31);
371 reg32 |= (1 << 29) | (1 << 28);
372 reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24);
373 reg32 |= (1 << 16);
374 reg32 |= (1 << 17);
375 reg32 |= (1 << 18);
376 reg32 |= (1 << 22);
377 reg32 |= (1 << 23);
378 reg32 &= ~(1 << 20);
379 reg32 |= (1 << 19);
380 reg32 |= (1 << 0);
381 reg32 |= (0xf << 1);
382 RCBA32(CG) = reg32;
383
384 RCBA32_OR(0x38c0, 0x7);
385 RCBA32_OR(0x36d4, 0x6680c004);
386 RCBA32_OR(0x3564, 0x3);
387 }
388
pch_set_acpi_mode(void)389 static void pch_set_acpi_mode(void)
390 {
391 if (!acpi_is_wakeup_s3()) {
392 apm_control(APM_CNT_ACPI_DISABLE);
393 }
394 }
395
pch_fixups(struct device * dev)396 static void pch_fixups(struct device *dev)
397 {
398 /* Indicate DRAM init done for MRC S3 to know it can resume */
399 pci_or_config8(dev, GEN_PMCON_2, 1 << 7);
400
401 /*
402 * Enable DMI ASPM in the PCH
403 */
404 RCBA32_AND_OR(DMC, ~(1 << 10), 0);
405 RCBA32_OR(LCAP, (1 << 11)|(1 << 10));
406 RCBA32_OR(LCTL, 0x3);
407 }
408
pch_spi_init(const struct device * const dev)409 static void pch_spi_init(const struct device *const dev)
410 {
411 const config_t *const config = dev->chip_info;
412
413 printk(BIOS_DEBUG, "%s\n", __func__);
414
415 if (config->spi_uvscc)
416 RCBA32(0x3800 + 0xc8) = config->spi_uvscc;
417 if (config->spi_lvscc)
418 RCBA32(0x3800 + 0xc4) = config->spi_lvscc;
419
420 if (config->spi_uvscc || config->spi_lvscc)
421 RCBA32_OR(0x3800 + 0xc4, 1 << 23); /* lock both UVSCC + LVSCC */
422 }
423
424 static const struct {
425 u16 dev_id;
426 const char *dev_name;
427 } pch_table[] = {
428 /* 6-series PCI ids from
429 * Intel® 6 Series Chipset and
430 * Intel® C200 Series Chipset
431 * Specification Update - NDA
432 * October 2013
433 * CDI / IBP#: 440377
434 */
435 {PCI_DID_INTEL_6_SERIES_MOBILE_SFF, "SFF Sample"},
436 {PCI_DID_INTEL_6_DESKTOP_SAMPLE, "Desktop Sample"},
437 {PCI_DID_INTEL_6_SERIES_MOBILE, "Mobile Sample"},
438 {PCI_DID_INTEL_6_SERIES_Z68, "Z68"},
439 {PCI_DID_INTEL_6_SERIES_P67, "P67"},
440 {PCI_DID_INTEL_6_SERIES_UM67, "UM67"},
441 {PCI_DID_INTEL_6_SERIES_HM65, "HM65"},
442 {PCI_DID_INTEL_6_SERIES_H67, "H67"},
443 {PCI_DID_INTEL_6_SERIES_HM67, "HM67"},
444 {PCI_DID_INTEL_6_SERIES_Q65, "Q65"},
445 {PCI_DID_INTEL_6_SERIES_QS67, "QS67"},
446 {PCI_DID_INTEL_6_SERIES_Q67, "Q67"},
447 {PCI_DID_INTEL_6_SERIES_QM67, "QM67"},
448 {PCI_DID_INTEL_6_SERIES_B65, "B65"},
449 {PCI_DID_INTEL_6_SERIES_C202, "C202"},
450 {PCI_DID_INTEL_6_SERIES_C204, "C204"},
451 {PCI_DID_INTEL_6_SERIES_C206, "C206"},
452 {PCI_DID_INTEL_6_SERIES_H61, "H61"},
453
454 /* 7-series PCI ids from Intel document 472178 */
455 {PCI_DID_INTEL_7_SERIES_DESKTOP_SAMPLE, "Desktop Sample"},
456 {PCI_DID_INTEL_7_SERIES_MOBILE, "Mobile Sample"},
457 {PCI_DID_INTEL_7_SERIES_MOBILE_SFF, "SFF Sample"},
458 {PCI_DID_INTEL_7_SERIES_Z77, "Z77"},
459 {PCI_DID_INTEL_7_SERIES_H71, "H71"},
460 {PCI_DID_INTEL_7_SERIES_Z75, "Z75"},
461 {PCI_DID_INTEL_7_SERIES_Q77, "Q77"},
462 {PCI_DID_INTEL_7_SERIES_Q75, "Q75"},
463 {PCI_DID_INTEL_7_SERIES_B75, "B75"},
464 {PCI_DID_INTEL_7_SERIES_H77, "H77"},
465 {PCI_DID_INTEL_7_SERIES_C216, "C216"},
466 {PCI_DID_INTEL_7_SERIES_QM77, "QM77"},
467 {PCI_DID_INTEL_7_SERIES_QS77, "QS77"},
468 {PCI_DID_INTEL_7_SERIES_UM77, "UM77"},
469 {PCI_DID_INTEL_7_SERIES_HM77, "HM77"},
470 {PCI_DID_INTEL_7_SERIES_HM76, "HM76"},
471 {PCI_DID_INTEL_7_SERIES_HM75, "HM75"},
472 {PCI_DID_INTEL_7_SERIES_HM70, "HM70"},
473 {PCI_DID_INTEL_7_SERIES_NM70, "NM70"},
474 };
475
report_pch_info(struct device * dev)476 static void report_pch_info(struct device *dev)
477 {
478 const u16 dev_id = pci_read_config16(dev, PCI_DEVICE_ID);
479 int i;
480
481 const char *pch_type = "Unknown";
482 for (i = 0; i < ARRAY_SIZE(pch_table); i++) {
483 if (pch_table[i].dev_id == dev_id) {
484 pch_type = pch_table[i].dev_name;
485 break;
486 }
487 }
488 printk(BIOS_INFO, "PCH: detected %s, device id: 0x%x, rev id 0x%x\n",
489 pch_type, dev_id, pci_read_config8(dev, PCI_CLASS_REVISION));
490 }
491
lpc_init(struct device * dev)492 static void lpc_init(struct device *dev)
493 {
494 printk(BIOS_DEBUG, "pch: %s\n", __func__);
495
496 /* Print detected platform */
497 report_pch_info(dev);
498
499 /* IO APIC initialization. */
500 pch_enable_ioapic(dev);
501
502 pch_enable_serial_irqs(dev);
503
504 /* Setup the PIRQ. */
505 pch_pirq_init(dev);
506
507 /* Setup power options. */
508 pch_power_options(dev);
509
510 /* Initialize power management */
511 switch (pch_silicon_type()) {
512 case PCH_TYPE_CPT: /* CougarPoint */
513 cpt_pm_init(dev);
514 break;
515 case PCH_TYPE_PPT: /* PantherPoint */
516 ppt_pm_init(dev);
517 break;
518 default:
519 printk(BIOS_ERR, "Unknown Chipset: 0x%04x\n", dev->device);
520 }
521
522 /* Initialize the real time clock. */
523 sb_rtc_init();
524
525 /* Initialize ISA DMA. */
526 isa_dma_init();
527
528 /* Initialize the High Precision Event Timers, if present. */
529 enable_hpet(dev);
530
531 /* Initialize Clock Gating */
532 enable_clock_gating(dev);
533
534 setup_i8259();
535
536 /* The OS should do this? */
537 /* Interrupt 9 should be level triggered (SCI) */
538 i8259_configure_irq_trigger(9, 1);
539
540 pch_set_acpi_mode();
541
542 pch_fixups(dev);
543
544 pch_spi_init(dev);
545 }
546
pch_lpc_read_resources(struct device * dev)547 static void pch_lpc_read_resources(struct device *dev)
548 {
549 struct resource *res;
550 config_t *config = dev->chip_info;
551 u8 io_index = 0;
552
553 /* Get the normal PCI resources of this device. */
554 pci_dev_read_resources(dev);
555
556 /* Add an extra subtractive resource for both memory and I/O. */
557 res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
558 res->base = 0;
559 res->size = 0x1000;
560 res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
561 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
562
563 res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
564 res->base = 0xff000000;
565 /* Some systems (e.g. X230) have 12 MiB flash.
566 SPI controller supports up to 2 x 16 MiB of flash but
567 address map limits this to 16MiB. */
568 res->size = 0x01000000; /* 16 MB for flash */
569 res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE |
570 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
571
572 res = new_resource(dev, 3); /* IOAPIC */
573 res->base = IO_APIC_ADDR;
574 res->size = 0x00001000;
575 res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
576
577 /* Set PCH IO decode ranges if required.*/
578 if ((config->gen1_dec & 0xFFFC) > 0x1000) {
579 res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
580 res->base = config->gen1_dec & 0xFFFC;
581 res->size = (config->gen1_dec >> 16) & 0xFC;
582 res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
583 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
584 }
585
586 if ((config->gen2_dec & 0xFFFC) > 0x1000) {
587 res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
588 res->base = config->gen2_dec & 0xFFFC;
589 res->size = (config->gen2_dec >> 16) & 0xFC;
590 res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
591 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
592 }
593
594 if ((config->gen3_dec & 0xFFFC) > 0x1000) {
595 res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
596 res->base = config->gen3_dec & 0xFFFC;
597 res->size = (config->gen3_dec >> 16) & 0xFC;
598 res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE |
599 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
600 }
601
602 if ((config->gen4_dec & 0xFFFC) > 0x1000) {
603 res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0));
604 res->base = config->gen4_dec & 0xFFFC;
605 res->size = (config->gen4_dec >> 16) & 0xFC;
606 res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE |
607 IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
608 }
609 }
610
pch_lpc_enable(struct device * dev)611 static void pch_lpc_enable(struct device *dev)
612 {
613 /* Enable PCH Display Port */
614 RCBA16(DISPBDF) = 0x0010;
615 RCBA32_OR(FD2, PCH_ENABLE_DBDF);
616
617 pch_enable(dev);
618 }
619
lpc_acpi_name(const struct device * dev)620 static const char *lpc_acpi_name(const struct device *dev)
621 {
622 return "LPCB";
623 }
624
southbridge_fill_ssdt(const struct device * device)625 static void southbridge_fill_ssdt(const struct device *device)
626 {
627 struct device *dev = pcidev_on_root(0x1f, 0);
628 config_t *chip = dev->chip_info;
629
630 intel_acpi_pcie_hotplug_generator(chip->pcie_hotplug_map, 8);
631 intel_acpi_gen_def_acpi_pirq(dev);
632 }
633
lpc_final(struct device * dev)634 static void lpc_final(struct device *dev)
635 {
636 spi_finalize_ops();
637
638 /* Call SMM finalize() handlers before resume */
639 if (CONFIG(INTEL_CHIPSET_LOCKDOWN) ||
640 acpi_is_wakeup_s3()) {
641 apm_control(APM_CNT_FINALIZE);
642 }
643 }
644
intel_southbridge_override_spi(struct intel_swseq_spi_config * spi_config)645 void intel_southbridge_override_spi(
646 struct intel_swseq_spi_config *spi_config)
647 {
648 struct device *dev = pcidev_on_root(0x1f, 0);
649
650 if (!dev)
651 return;
652 /* Devicetree may override defaults. */
653 const config_t *const config = dev->chip_info;
654
655 if (!config)
656 return;
657
658 if (config->spi.ops[0].op != 0)
659 memcpy(spi_config, &config->spi, sizeof(*spi_config));
660 }
661
662 struct device_operations bd82x6x_lpc_bridge_ops = {
663 .read_resources = pch_lpc_read_resources,
664 .set_resources = pci_dev_set_resources,
665 .enable_resources = pci_dev_enable_resources,
666 .write_acpi_tables = acpi_write_hpet,
667 .acpi_fill_ssdt = southbridge_fill_ssdt,
668 .acpi_name = lpc_acpi_name,
669 .init = lpc_init,
670 .final = lpc_final,
671 .enable = pch_lpc_enable,
672 .scan_bus = scan_static_bus,
673 .ops_pci = &pci_dev_ops_pci,
674 };
675