1--- ref 2+++ di 3@@ -60,23 +60,12 @@ 4 VIC 18: 720x576 50.000000 Hz 16:9 31.250 kHz 27.000000 MHz 5 VIC 17: 720x576 50.000000 Hz 4:3 31.250 kHz 27.000000 MHz 6 VIC 1: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz 7- Vendor-Specific Data Block (HDMI), OUI 00-0C-03: 8- Source physical address: 1.0.0.0 9- DC_36bit 10- DC_30bit 11- DC_Y444 12- Maximum TMDS clock: 310 MHz 13 Video Capability Data Block: 14 YCbCr quantization: No Data 15 RGB quantization: No Data 16 PT scan behavior: Always Underscanned 17 IT scan behavior: Always Underscanned 18 CE scan behavior: Supports both over- and underscan 19- Vendor-Specific Data Block (AMD), OUI 00-00-1A: 20- Version: 1.1 21- Minimum Refresh Rate: 46 Hz 22- Maximum Refresh Rate: 75 Hz 23- Flags 1.x: 0xed (MCCS) 24 Colorimetry Data Block: 25 BT2020cYCC 26 BT2020YCC 27@@ -104,22 +93,12 @@ 28 DTD 5: 1920x1080 74.972503 Hz 16:9 83.894 kHz 174.500000 MHz (597 mm x 339 mm) 29 Hfront 48 Hsync 32 Hback 80 Hpol P 30 Vfront 3 Vsync 5 Vback 31 Vpol N 31-Checksum: 0xa3 Unused space in Extension Block: 10 bytes 32+Checksum: 0xa3 33 34 ---------------- 35 36-Warnings: 37- 38-Block 0, Base EDID: 39- Vendor & Product Identification: The serial number is one of the known dummy values, it should probably be set to 0. 40-Block 1, CTA-861 Extension Block: 41- Video Capability Data Block: Set Selectable YCbCr Quantization to avoid interop issues. 42- Colorimetry Data Block: Set the sRGB colorimetry bit to avoid interop issues. 43- Display Product Serial Number is set, so the Serial Number in the Base EDID should be 0. 44- 45 Failures: 46 47 Block 1, CTA-861 Extension Block: 48 Video Capability Data Block: Set Selectable RGB Quantization to avoid interop issues. 49- 50 EDID conformity: FAIL 51