1--- ref 2+++ di 3@@ -105,15 +105,6 @@ 4 PT scan behavior: No Data 5 IT scan behavior: Always Underscanned 6 CE scan behavior: Supports both over- and underscan 7- Vendor-Specific Data Block (HDMI), OUI 00-0C-03: 8- Source physical address: 1.0.0.0 9- Supports_AI 10- DC_36bit 11- DC_30bit 12- DC_Y444 13- Maximum TMDS clock: 340 MHz 14- Supported Content Types: 15- Graphics 16 Detailed Timing Descriptors: 17 DTD 3: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (1209 mm x 680 mm) 18 Hfront 88 Hsync 44 Hback 148 Hpol P 19@@ -121,31 +112,13 @@ 20 DTD 4: 1280x720 60.000000 Hz 16:9 45.000 kHz 74.250000 MHz (1209 mm x 680 mm) 21 Hfront 110 Hsync 40 Hback 220 Hpol P 22 Vfront 5 Vsync 5 Vback 20 Vpol P 23-Checksum: 0xde Unused space in Extension Block: 26 bytes 24+Checksum: 0xde 25 26 ---------------- 27 28-Warnings: 29- 30-Block 0, Base EDID: 31- Standard Timings: Standard Timing 1360x765 has a dubious odd vertical resolution. 32- Detailed Timing Descriptor #2: DTD is similar but not identical to DMT 0x51. 33-Block 1, CTA-861 Extension Block: 34- Video Capability Data Block: Set Selectable YCbCr Quantization to avoid interop issues. 35- Add a Colorimetry Data Block with the sRGB colorimetry bit set to avoid interop issues. 36-EDID: 37- Base EDID: Some timings are out of range of the Monitor Ranges: 38- Vertical Freq: 24.000 - 60.317 Hz (Monitor: 50.000 - 75.000 Hz) 39- Horizontal Freq: 15.625 - 75.000 kHz (Monitor: 30.000 - 80.000 kHz) 40- 41 Failures: 42 43-Block 0, Base EDID: 44- Detailed Timing Descriptor #1: Mismatch of image size 800x450 mm vs display size 1210x680 mm. 45 Block 1, CTA-861 Extension Block: 46 HDMI Audio Data Block: MS NonMixed support indicated but Max Stream Count == 0. 47 Video Capability Data Block: Set Selectable RGB Quantization to avoid interop issues. 48-EDID: 49- CTA-861: Native progressive timings are a mix of several resolutions. 50- 51 EDID conformity: FAIL 52