1# OpenThread Factory Tool Reference 2 3## Overview 4 5The ot-fct is used to store the power calibration table into the factory configuration file and show the power related tables. 6 7## Command List 8 9- [powercalibrationtable](#powercalibrationtable) 10- [regiondomaintable](#regiondomaintable) 11- [targetpowertable](#targetpowertable) 12 13#### powercalibrationtable 14 15Show the power calibration table. 16 17```bash 18> powercalibrationtable 19| ChStart | ChEnd | ActualPower(0.01dBm) | RawPowerSetting | 20+---------+---------+----------------------+-----------------+ 21| 11 | 25 | 1900 | 112233 | 22| 11 | 25 | 1000 | 223344 | 23| 26 | 26 | 1500 | 334455 | 24| 26 | 26 | 700 | 445566 | 25Done 26``` 27 28#### powercalibrationtable add -b \<channelstart\>,\<channelend\> -c \<actualpower\>,\<rawpowersetting\>/... ... 29 30Add power calibration table entry. 31 32- channelstart: Sub-band start channel. 33- channelend: Sub-band end channel. 34- actualpower: The actual power in 0.01 dBm. 35- rawpowersetting: The raw power setting hex string. 36 37```bash 38> powercalibrationtable add -b 11,25 -c 1900,112233/1000,223344 -b 26,26 -c 1500,334455/700,445566 39Done 40``` 41 42#### powercalibrationtable clear 43 44Clear the power calibration table. 45 46```bash 47> powercalibrationtable clear 48Done 49``` 50 51#### regiondomaintable 52 53Show the region and regulatory domain mapping table. 54 55```bash 56> regiondomaintable 57FCC,AU,CA,CL,CO,IN,MX,PE,TW,US 58ETSI,WW 59Done 60``` 61 62#### targetpowertable 63 64Show the target power table. 65 66```bash 67> targetpowertable 68| Domain | ChStart | ChEnd | TargetPower(0.01dBm) | 69+----------+---------+---------+----------------------+ 70| FCC | 11 | 14 | 1700 | 71| FCC | 15 | 24 | 2000 | 72| FCC | 25 | 26 | 1600 | 73| ETSI | 11 | 26 | 1000 | 74Done 75``` 76