1 2 Using a Borland compiler product 3 4The files in this directory support using both the free Borland command-line 5compiler tools and the Borland C++ Builder IDE. The project files have been 6tested with both versions 5 and 6 of the C++ Builder product. 7 8 Using the free BCC32 command line compiler 9 10After downloading and installing the free C++ Builder commandline version, 11perform the following steps (assuming it was installed under C:\Borland\BCC55): 12 131) Add "C:\Borland\BCC55\BIN" to your path 142) Set the environment variable BCB to "C:\Borland\BCC55". 153) edit makefile.mak: enable or comment out the appropriate commands under 16 clean & distclean, depending on whether your OS can use deltree /y or 17 del /s/f/q. 18 19After that, you should simply cd to the bcb5 directory in your Expat directory 20tree (same structure as CVS) and run "make all" or just "make". 21 22 Naming 23 24The libraries have the base name "libexpat" followed optionally by an "s" 25(static) or a "w" (unicode version), then an underscore and optionally 26"mt" (multi-threaded) and "d" (dynamic RTL). 27 28To change the name of the library a project file produces, edit the project 29option source (see step 1 under Unicode below) and change the name contained in 30the PROJECT tag. In a make file, change the value assigned to the PROJECT 31variable. Also, the LIBRARY entry in the .def file has to be changed to 32correspond to the new executable name. 33 34 35 Unicode Considerations 36 37There are no facilities in the BCB 5 GUI to create a unicode-enabled 38application. Fortunately, it is not hard to do by hand. 39 401. The startup .obj system file must be changed to the unicode version. 41 Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change 42 c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the 43 following kludge will make the change stick. Close and save the file 44 (CTRL-F4) then open the options dialog (CTRL-Shift-F11), then click OK on 45 the dialog immediately without changing anything in it. If this doesn't work, 46 you will have to close the project completely and edit the .bpr file by hand. 47 48 If you are using a make file, just change the startup .obj file assigned 49 to the ALLOBJ variable. 50 512. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the options 52 dialog, Directories/Conditionals tab, in the Conditional define box. In a 53 make file, put it in the USERDEFINES variable. 54 553. Of course, your code has to be written for unicode. As a start, the "main" 56 function is called "wmain". The tchar macros are an interesting way to 57 write code that can easily switch between unicode and utf-8. If these macros 58 are used, then simply adding the conditional define _UNICODE as well as 59 XML_UNICODE_WCHAR_T will bring in the unicode versions of the tchar macros. 60 Otherwise the utf-8 versions are used. xmlwf uses its own versions of the 61 tchar macros which are switched on and off by the XML_UNICODE macro, which 62 itself is set by the XML_UNICODE_WCHAR_T define. 63 64 Threading 65 66The libexpat libraries are all built to link with the multi-threaded dynamic RTL's. 67That means they require CC32xxMT.DLL present on the installation target. 68To create single-threaded libs, do the following: 69 701. The compiler option for multi-threading must be turned off. Following the 71 instructions above to edit the option source, remove the -tWM option from 72 the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable. 73 742. The single threaded RTL must be called. change the RTL in the ALLLIB tag or 75 variable (GUI or makefile repectively) to the version without the "mt" in the 76 name. For example, change cw32mti.lib to cw32i.lib. 77 78 Static RTL's 79 80To build the libs with static RTL's do the following, 81 821. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the 83 "Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the 84 options dialog, uncheck "Use dynamic RTL". If you are using a make file, 85 remove the _RTLDLL assignment to the SYSDEFINES variable, and change the RTL 86 to the version without an "i" in the ALLLIB variable. For example, 87 cw32mti.lib would become cw32mt.lib. 88