• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1#! /bin/sh
2#
3# sample script on using the ingress capabilities using u32 classifier
4# This script tags tcindex based on metering on the ingress
5# interface the result is used for fast classification and re-marking
6# on the egress interface
7# This is an example of a color blind mode marker with PIR configured
8# based on draft-wahjak-mcm-00.txt (section 3.2)
9#
10#path to various utilities;
11#change to reflect yours.
12#
13IPROUTE=/root/DS-6-beta/iproute2-990530-dsing
14TC=$IPROUTE/tc/tc
15IP=$IPROUTE/ip/ip
16INDEV=eth2
17EGDEV="dev eth1"
18CIR1=1000kbit
19CIR2=1000kbit
20# The PIR is the excess (in addition to the CIR i.e if always
21# going to the PIR --> average rate is CIR+PIR)
22PIR1=1000kbit
23PIR2=500kbit
24
25#The CBS is about 60 MTU sized packets
26CBS1=90k
27CBS2=90k
28#the EBS is about 10 max sized packets
29EBS1=15k
30EBS2=15k
31# The meters
32meter1=" police rate $CIR1 burst $CBS1 "
33meter1a=" police rate $PIR1 burst $EBS1 "
34meter2=" police rate $CIR2 burst $CBS1 "
35meter2a="police rate $PIR2 burst $CBS1 "
36meter3=" police rate $CIR2 burst $CBS2 "
37meter3a=" police rate $PIR2 burst $EBS2 "
38meter4=" police rate $CIR1 burst $CBS2 "
39meter5=" police rate $CIR1 burst $CBS2 "
40
41
42# install the ingress qdisc on the ingress interface
43############################################################
44$TC qdisc add dev $INDEV handle ffff: ingress
45############################################################
46#
47############################################################
48
49# All packets are marked with a tcindex value which is used on the egress
50# NOTE: tcindex 1 maps to AF41, 2->AF42, 3->AF43, 4->BE
51#
52#anything from subnet 10.2.0.2/24 is passed on with a tcindex value 1
53#if it doesnt exceed its CIR/CBS + PIR/EBS
54#
55$TC filter add dev $INDEV parent ffff: protocol ip prio 1 u32 \
56match ip src 10.2.0.0/24 $meter1 \
57continue flowid :1
58$TC filter add dev $INDEV parent ffff: protocol ip prio 2 u32 \
59match ip src 10.2.0.0/24 $meter1a \
60continue flowid :1
61
62#
63# if it exceeds the above but not the extra rate/burst below, it gets a
64#tcindex value  of 2
65#
66$TC filter add dev $INDEV parent ffff: protocol ip prio 3 u32 \
67match ip src 10.2.0.0/24 $meter2 \
68continue flowid :2
69$TC filter add dev $INDEV parent ffff: protocol ip prio 4 u32 \
70match ip src 10.2.0.0/24 $meter2a \
71continue flowid :2
72#
73# if it exceeds the above but not the rule below, it gets a tcindex value
74# of 3
75#
76$TC filter add dev $INDEV parent ffff: protocol ip prio 5 u32 \
77match ip src 10.2.0.0/24 $meter3 \
78continue flowid :3
79$TC filter add dev $INDEV parent ffff: protocol ip prio 6 u32 \
80match ip src 10.2.0.0/24 $meter3a \
81drop flowid :3
82#
83#
84# Anything else (not from the subnet 10.2.0.24/24) gets discarded if it
85# exceeds 1Mbps and by default goes to BE if it doesnt
86#
87$TC filter add dev $INDEV parent ffff: protocol ip prio 7 u32 \
88match ip src 0/0 $meter5 \
89drop flowid :4
90
91
92######################## Egress side ########################
93
94
95# attach a dsmarker
96#
97$TC qdisc add $EGDEV handle 1:0 root dsmark indices 64
98#
99# values of the DSCP to change depending on the class
100#note that the ECN bits are masked out
101#
102#AF41 (0x88 is 0x22 shifted to the right by two bits)
103#
104$TC class change $EGDEV classid 1:1 dsmark mask 0x3 \
105       value 0x88
106#AF42
107$TC class change $EGDEV classid 1:2 dsmark mask 0x3 \
108       value 0x90
109#AF43
110$TC class change $EGDEV classid 1:3 dsmark mask 0x3 \
111       value 0x98
112#BE
113$TC class change $EGDEV classid 1:3 dsmark mask 0x3 \
114       value 0x0
115#
116#
117# The class mapping
118#
119$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
120          handle 1 tcindex classid 1:1
121$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
122          handle 2 tcindex  classid 1:2
123$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
124          handle 3 tcindex  classid 1:3
125$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
126          handle 4 tcindex  classid 1:4
127#
128
129#
130echo "---- qdisc parameters Ingress  ----------"
131$TC qdisc ls dev $INDEV
132echo "---- Class parameters Ingress  ----------"
133$TC class ls dev $INDEV
134echo "---- filter parameters Ingress ----------"
135$TC filter ls dev $INDEV parent ffff:
136
137echo "---- qdisc parameters Egress  ----------"
138$TC qdisc ls $EGDEV
139echo "---- Class parameters Egress  ----------"
140$TC class ls $EGDEV
141echo "---- filter parameters Egress ----------"
142$TC filter ls $EGDEV parent 1:0
143#
144#deleting the ingress qdisc
145#$TC qdisc del $INDEV ingress
146