1 /*
2 * Linux host USB redirector
3 *
4 * Copyright (c) 2005 Fabrice Bellard
5 *
6 * Copyright (c) 2008 Max Krasnyansky
7 * Support for host device auto connect & disconnect
8 * Major rewrite to support fully async operation
9 *
10 * Copyright 2008 TJ <linux@tjworld.net>
11 * Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition
12 * to the legacy /proc/bus/usb USB device discovery and handling
13 *
14 * Permission is hereby granted, free of charge, to any person obtaining a copy
15 * of this software and associated documentation files (the "Software"), to deal
16 * in the Software without restriction, including without limitation the rights
17 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
18 * copies of the Software, and to permit persons to whom the Software is
19 * furnished to do so, subject to the following conditions:
20 *
21 * The above copyright notice and this permission notice shall be included in
22 * all copies or substantial portions of the Software.
23 *
24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
25 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
26 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
27 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
28 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
29 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
30 * THE SOFTWARE.
31 */
32
33 #include "qemu-common.h"
34 #include "qemu-timer.h"
35 #include "monitor.h"
36
37 #include <dirent.h>
38 #include <sys/ioctl.h>
39 #include <signal.h>
40
41 #include <linux/usbdevice_fs.h>
42 #include <linux/version.h>
43 #include "hw/usb.h"
44
45 /* We redefine it to avoid version problems */
46 struct usb_ctrltransfer {
47 uint8_t bRequestType;
48 uint8_t bRequest;
49 uint16_t wValue;
50 uint16_t wIndex;
51 uint16_t wLength;
52 uint32_t timeout;
53 void *data;
54 };
55
56 struct usb_ctrlrequest {
57 uint8_t bRequestType;
58 uint8_t bRequest;
59 uint16_t wValue;
60 uint16_t wIndex;
61 uint16_t wLength;
62 };
63
64 typedef int USBScanFunc(void *opaque, int bus_num, int addr, int class_id,
65 int vendor_id, int product_id,
66 const char *product_name, int speed);
67 static int usb_host_find_device(int *pbus_num, int *paddr,
68 char *product_name, int product_name_size,
69 const char *devname);
70 //#define DEBUG
71
72 #ifdef DEBUG
73 #define dprintf printf
74 #else
75 #define dprintf(...)
76 #endif
77
78 #define USBDBG_DEVOPENED "husb: opened %s/devices\n"
79
80 #define USBPROCBUS_PATH "/proc/bus/usb"
81 #define PRODUCT_NAME_SZ 32
82 #define MAX_ENDPOINTS 16
83 #define USBDEVBUS_PATH "/dev/bus/usb"
84 #define USBSYSBUS_PATH "/sys/bus/usb"
85
86 static char *usb_host_device_path;
87
88 #define USB_FS_NONE 0
89 #define USB_FS_PROC 1
90 #define USB_FS_DEV 2
91 #define USB_FS_SYS 3
92
93 static int usb_fs_type;
94
95 /* endpoint association data */
96 struct endp_data {
97 uint8_t type;
98 uint8_t halted;
99 };
100
101 enum {
102 CTRL_STATE_IDLE = 0,
103 CTRL_STATE_SETUP,
104 CTRL_STATE_DATA,
105 CTRL_STATE_ACK
106 };
107
108 /*
109 * Control transfer state.
110 * Note that 'buffer' _must_ follow 'req' field because
111 * we need contigious buffer when we submit control URB.
112 */
113 struct ctrl_struct {
114 uint16_t len;
115 uint16_t offset;
116 uint8_t state;
117 struct usb_ctrlrequest req;
118 uint8_t buffer[1024];
119 };
120
121 typedef struct USBHostDevice {
122 USBDevice dev;
123 int fd;
124
125 uint8_t descr[1024];
126 int descr_len;
127 int configuration;
128 int ninterfaces;
129 int closing;
130
131 struct ctrl_struct ctrl;
132 struct endp_data endp_table[MAX_ENDPOINTS];
133
134 /* Host side address */
135 int bus_num;
136 int addr;
137
138 struct USBHostDevice *next;
139 } USBHostDevice;
140
is_isoc(USBHostDevice * s,int ep)141 static int is_isoc(USBHostDevice *s, int ep)
142 {
143 return s->endp_table[ep - 1].type == USBDEVFS_URB_TYPE_ISO;
144 }
145
is_halted(USBHostDevice * s,int ep)146 static int is_halted(USBHostDevice *s, int ep)
147 {
148 return s->endp_table[ep - 1].halted;
149 }
150
clear_halt(USBHostDevice * s,int ep)151 static void clear_halt(USBHostDevice *s, int ep)
152 {
153 s->endp_table[ep - 1].halted = 0;
154 }
155
set_halt(USBHostDevice * s,int ep)156 static void set_halt(USBHostDevice *s, int ep)
157 {
158 s->endp_table[ep - 1].halted = 1;
159 }
160
161 static USBHostDevice *hostdev_list;
162
hostdev_link(USBHostDevice * dev)163 static void hostdev_link(USBHostDevice *dev)
164 {
165 dev->next = hostdev_list;
166 hostdev_list = dev;
167 }
168
hostdev_unlink(USBHostDevice * dev)169 static void hostdev_unlink(USBHostDevice *dev)
170 {
171 USBHostDevice *pdev = hostdev_list;
172 USBHostDevice **prev = &hostdev_list;
173
174 while (pdev) {
175 if (pdev == dev) {
176 *prev = dev->next;
177 return;
178 }
179
180 prev = &pdev->next;
181 pdev = pdev->next;
182 }
183 }
184
hostdev_find(int bus_num,int addr)185 static USBHostDevice *hostdev_find(int bus_num, int addr)
186 {
187 USBHostDevice *s = hostdev_list;
188 while (s) {
189 if (s->bus_num == bus_num && s->addr == addr)
190 return s;
191 s = s->next;
192 }
193 return NULL;
194 }
195
196 /*
197 * Async URB state.
198 * We always allocate one isoc descriptor even for bulk transfers
199 * to simplify allocation and casts.
200 */
201 typedef struct AsyncURB
202 {
203 struct usbdevfs_urb urb;
204 struct usbdevfs_iso_packet_desc isocpd;
205
206 USBPacket *packet;
207 USBHostDevice *hdev;
208 } AsyncURB;
209
async_alloc(void)210 static AsyncURB *async_alloc(void)
211 {
212 return (AsyncURB *) qemu_mallocz(sizeof(AsyncURB));
213 }
214
async_free(AsyncURB * aurb)215 static void async_free(AsyncURB *aurb)
216 {
217 qemu_free(aurb);
218 }
219
async_complete_ctrl(USBHostDevice * s,USBPacket * p)220 static void async_complete_ctrl(USBHostDevice *s, USBPacket *p)
221 {
222 switch(s->ctrl.state) {
223 case CTRL_STATE_SETUP:
224 if (p->len < s->ctrl.len)
225 s->ctrl.len = p->len;
226 s->ctrl.state = CTRL_STATE_DATA;
227 p->len = 8;
228 break;
229
230 case CTRL_STATE_ACK:
231 s->ctrl.state = CTRL_STATE_IDLE;
232 p->len = 0;
233 break;
234
235 default:
236 break;
237 }
238 }
239
async_complete(void * opaque)240 static void async_complete(void *opaque)
241 {
242 USBHostDevice *s = opaque;
243 AsyncURB *aurb;
244
245 while (1) {
246 USBPacket *p;
247
248 int r = ioctl(s->fd, USBDEVFS_REAPURBNDELAY, &aurb);
249 if (r < 0) {
250 if (errno == EAGAIN)
251 return;
252
253 if (errno == ENODEV && !s->closing) {
254 printf("husb: device %d.%d disconnected\n", s->bus_num, s->addr);
255 usb_device_del_addr(0, s->dev.addr);
256 return;
257 }
258
259 dprintf("husb: async. reap urb failed errno %d\n", errno);
260 return;
261 }
262
263 p = aurb->packet;
264
265 dprintf("husb: async completed. aurb %p status %d alen %d\n",
266 aurb, aurb->urb.status, aurb->urb.actual_length);
267
268 if (p) {
269 switch (aurb->urb.status) {
270 case 0:
271 p->len = aurb->urb.actual_length;
272 if (aurb->urb.type == USBDEVFS_URB_TYPE_CONTROL)
273 async_complete_ctrl(s, p);
274 break;
275
276 case -EPIPE:
277 set_halt(s, p->devep);
278 /* fall through */
279 default:
280 p->len = USB_RET_NAK;
281 break;
282 }
283
284 usb_packet_complete(p);
285 }
286
287 async_free(aurb);
288 }
289 }
290
async_cancel(USBPacket * unused,void * opaque)291 static void async_cancel(USBPacket *unused, void *opaque)
292 {
293 AsyncURB *aurb = opaque;
294 USBHostDevice *s = aurb->hdev;
295
296 dprintf("husb: async cancel. aurb %p\n", aurb);
297
298 /* Mark it as dead (see async_complete above) */
299 aurb->packet = NULL;
300
301 int r = ioctl(s->fd, USBDEVFS_DISCARDURB, aurb);
302 if (r < 0) {
303 dprintf("husb: async. discard urb failed errno %d\n", errno);
304 }
305 }
306
usb_host_claim_interfaces(USBHostDevice * dev,int configuration)307 static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration)
308 {
309 int dev_descr_len, config_descr_len;
310 int interface, nb_interfaces, nb_configurations;
311 int ret, i;
312
313 if (configuration == 0) /* address state - ignore */
314 return 1;
315
316 dprintf("husb: claiming interfaces. config %d\n", configuration);
317
318 i = 0;
319 dev_descr_len = dev->descr[0];
320 if (dev_descr_len > dev->descr_len)
321 goto fail;
322 nb_configurations = dev->descr[17];
323
324 i += dev_descr_len;
325 while (i < dev->descr_len) {
326 dprintf("husb: i is %d, descr_len is %d, dl %d, dt %d\n", i, dev->descr_len,
327 dev->descr[i], dev->descr[i+1]);
328
329 if (dev->descr[i+1] != USB_DT_CONFIG) {
330 i += dev->descr[i];
331 continue;
332 }
333 config_descr_len = dev->descr[i];
334
335 printf("husb: config #%d need %d\n", dev->descr[i + 5], configuration);
336
337 if (configuration < 0 || configuration == dev->descr[i + 5]) {
338 configuration = dev->descr[i + 5];
339 break;
340 }
341
342 i += config_descr_len;
343 }
344
345 if (i >= dev->descr_len) {
346 fprintf(stderr, "husb: update iface failed. no matching configuration\n");
347 goto fail;
348 }
349 nb_interfaces = dev->descr[i + 4];
350
351 #ifdef USBDEVFS_DISCONNECT
352 /* earlier Linux 2.4 do not support that */
353 {
354 struct usbdevfs_ioctl ctrl;
355 for (interface = 0; interface < nb_interfaces; interface++) {
356 ctrl.ioctl_code = USBDEVFS_DISCONNECT;
357 ctrl.ifno = interface;
358 ret = ioctl(dev->fd, USBDEVFS_IOCTL, &ctrl);
359 if (ret < 0 && errno != ENODATA) {
360 perror("USBDEVFS_DISCONNECT");
361 goto fail;
362 }
363 }
364 }
365 #endif
366
367 /* XXX: only grab if all interfaces are free */
368 for (interface = 0; interface < nb_interfaces; interface++) {
369 ret = ioctl(dev->fd, USBDEVFS_CLAIMINTERFACE, &interface);
370 if (ret < 0) {
371 if (errno == EBUSY) {
372 printf("husb: update iface. device already grabbed\n");
373 } else {
374 perror("husb: failed to claim interface");
375 }
376 fail:
377 return 0;
378 }
379 }
380
381 printf("husb: %d interfaces claimed for configuration %d\n",
382 nb_interfaces, configuration);
383
384 dev->ninterfaces = nb_interfaces;
385 dev->configuration = configuration;
386 return 1;
387 }
388
usb_host_release_interfaces(USBHostDevice * s)389 static int usb_host_release_interfaces(USBHostDevice *s)
390 {
391 int ret, i;
392
393 dprintf("husb: releasing interfaces\n");
394
395 for (i = 0; i < s->ninterfaces; i++) {
396 ret = ioctl(s->fd, USBDEVFS_RELEASEINTERFACE, &i);
397 if (ret < 0) {
398 perror("husb: failed to release interface");
399 return 0;
400 }
401 }
402
403 return 1;
404 }
405
usb_host_handle_reset(USBDevice * dev)406 static void usb_host_handle_reset(USBDevice *dev)
407 {
408 USBHostDevice *s = (USBHostDevice *) dev;
409
410 dprintf("husb: reset device %u.%u\n", s->bus_num, s->addr);
411
412 ioctl(s->fd, USBDEVFS_RESET);
413
414 usb_host_claim_interfaces(s, s->configuration);
415 }
416
usb_host_handle_destroy(USBDevice * dev)417 static void usb_host_handle_destroy(USBDevice *dev)
418 {
419 USBHostDevice *s = (USBHostDevice *)dev;
420
421 s->closing = 1;
422
423 qemu_set_fd_handler(s->fd, NULL, NULL, NULL);
424
425 hostdev_unlink(s);
426
427 async_complete(s);
428
429 if (s->fd >= 0)
430 close(s->fd);
431
432 qemu_free(s);
433 }
434
435 static int usb_linux_update_endp_table(USBHostDevice *s);
436
usb_host_handle_data(USBHostDevice * s,USBPacket * p)437 static int usb_host_handle_data(USBHostDevice *s, USBPacket *p)
438 {
439 struct usbdevfs_urb *urb;
440 AsyncURB *aurb;
441 int ret;
442
443 aurb = async_alloc();
444 aurb->hdev = s;
445 aurb->packet = p;
446
447 urb = &aurb->urb;
448
449 if (p->pid == USB_TOKEN_IN)
450 urb->endpoint = p->devep | 0x80;
451 else
452 urb->endpoint = p->devep;
453
454 if (is_halted(s, p->devep)) {
455 ret = ioctl(s->fd, USBDEVFS_CLEAR_HALT, &urb->endpoint);
456 if (ret < 0) {
457 dprintf("husb: failed to clear halt. ep 0x%x errno %d\n",
458 urb->endpoint, errno);
459 return USB_RET_NAK;
460 }
461 clear_halt(s, p->devep);
462 }
463
464 urb->buffer = p->data;
465 urb->buffer_length = p->len;
466
467 if (is_isoc(s, p->devep)) {
468 /* Setup ISOC transfer */
469 urb->type = USBDEVFS_URB_TYPE_ISO;
470 urb->flags = USBDEVFS_URB_ISO_ASAP;
471 urb->number_of_packets = 1;
472 urb->iso_frame_desc[0].length = p->len;
473 } else {
474 /* Setup bulk transfer */
475 urb->type = USBDEVFS_URB_TYPE_BULK;
476 }
477
478 urb->usercontext = s;
479
480 ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
481
482 dprintf("husb: data submit. ep 0x%x len %u aurb %p\n", urb->endpoint, p->len, aurb);
483
484 if (ret < 0) {
485 dprintf("husb: submit failed. errno %d\n", errno);
486 async_free(aurb);
487
488 switch(errno) {
489 case ETIMEDOUT:
490 return USB_RET_NAK;
491 case EPIPE:
492 default:
493 return USB_RET_STALL;
494 }
495 }
496
497 usb_defer_packet(p, async_cancel, aurb);
498 return USB_RET_ASYNC;
499 }
500
ctrl_error(void)501 static int ctrl_error(void)
502 {
503 if (errno == ETIMEDOUT)
504 return USB_RET_NAK;
505 else
506 return USB_RET_STALL;
507 }
508
usb_host_set_address(USBHostDevice * s,int addr)509 static int usb_host_set_address(USBHostDevice *s, int addr)
510 {
511 dprintf("husb: ctrl set addr %u\n", addr);
512 s->dev.addr = addr;
513 return 0;
514 }
515
usb_host_set_config(USBHostDevice * s,int config)516 static int usb_host_set_config(USBHostDevice *s, int config)
517 {
518 usb_host_release_interfaces(s);
519
520 int ret = ioctl(s->fd, USBDEVFS_SETCONFIGURATION, &config);
521
522 dprintf("husb: ctrl set config %d ret %d errno %d\n", config, ret, errno);
523
524 if (ret < 0)
525 return ctrl_error();
526
527 usb_host_claim_interfaces(s, config);
528 return 0;
529 }
530
usb_host_set_interface(USBHostDevice * s,int iface,int alt)531 static int usb_host_set_interface(USBHostDevice *s, int iface, int alt)
532 {
533 struct usbdevfs_setinterface si;
534 int ret;
535
536 si.interface = iface;
537 si.altsetting = alt;
538 ret = ioctl(s->fd, USBDEVFS_SETINTERFACE, &si);
539
540 dprintf("husb: ctrl set iface %d altset %d ret %d errno %d\n",
541 iface, alt, ret, errno);
542
543 if (ret < 0)
544 return ctrl_error();
545
546 usb_linux_update_endp_table(s);
547 return 0;
548 }
549
usb_host_handle_control(USBHostDevice * s,USBPacket * p)550 static int usb_host_handle_control(USBHostDevice *s, USBPacket *p)
551 {
552 struct usbdevfs_urb *urb;
553 AsyncURB *aurb;
554 int ret, value, index;
555
556 /*
557 * Process certain standard device requests.
558 * These are infrequent and are processed synchronously.
559 */
560 value = le16_to_cpu(s->ctrl.req.wValue);
561 index = le16_to_cpu(s->ctrl.req.wIndex);
562
563 dprintf("husb: ctrl type 0x%x req 0x%x val 0x%x index %u len %u\n",
564 s->ctrl.req.bRequestType, s->ctrl.req.bRequest, value, index,
565 s->ctrl.len);
566
567 if (s->ctrl.req.bRequestType == 0) {
568 switch (s->ctrl.req.bRequest) {
569 case USB_REQ_SET_ADDRESS:
570 return usb_host_set_address(s, value);
571
572 case USB_REQ_SET_CONFIGURATION:
573 return usb_host_set_config(s, value & 0xff);
574 }
575 }
576
577 if (s->ctrl.req.bRequestType == 1 &&
578 s->ctrl.req.bRequest == USB_REQ_SET_INTERFACE)
579 return usb_host_set_interface(s, index, value);
580
581 /* The rest are asynchronous */
582
583 aurb = async_alloc();
584 aurb->hdev = s;
585 aurb->packet = p;
586
587 /*
588 * Setup ctrl transfer.
589 *
590 * s->ctrl is layed out such that data buffer immediately follows
591 * 'req' struct which is exactly what usbdevfs expects.
592 */
593 urb = &aurb->urb;
594
595 urb->type = USBDEVFS_URB_TYPE_CONTROL;
596 urb->endpoint = p->devep;
597
598 urb->buffer = &s->ctrl.req;
599 urb->buffer_length = 8 + s->ctrl.len;
600
601 urb->usercontext = s;
602
603 ret = ioctl(s->fd, USBDEVFS_SUBMITURB, urb);
604
605 dprintf("husb: submit ctrl. len %u aurb %p\n", urb->buffer_length, aurb);
606
607 if (ret < 0) {
608 dprintf("husb: submit failed. errno %d\n", errno);
609 async_free(aurb);
610
611 switch(errno) {
612 case ETIMEDOUT:
613 return USB_RET_NAK;
614 case EPIPE:
615 default:
616 return USB_RET_STALL;
617 }
618 }
619
620 usb_defer_packet(p, async_cancel, aurb);
621 return USB_RET_ASYNC;
622 }
623
do_token_setup(USBDevice * dev,USBPacket * p)624 static int do_token_setup(USBDevice *dev, USBPacket *p)
625 {
626 USBHostDevice *s = (USBHostDevice *) dev;
627 int ret = 0;
628
629 if (p->len != 8)
630 return USB_RET_STALL;
631
632 memcpy(&s->ctrl.req, p->data, 8);
633 s->ctrl.len = le16_to_cpu(s->ctrl.req.wLength);
634 s->ctrl.offset = 0;
635 s->ctrl.state = CTRL_STATE_SETUP;
636
637 if (s->ctrl.req.bRequestType & USB_DIR_IN) {
638 ret = usb_host_handle_control(s, p);
639 if (ret < 0)
640 return ret;
641
642 if (ret < s->ctrl.len)
643 s->ctrl.len = ret;
644 s->ctrl.state = CTRL_STATE_DATA;
645 } else {
646 if (s->ctrl.len == 0)
647 s->ctrl.state = CTRL_STATE_ACK;
648 else
649 s->ctrl.state = CTRL_STATE_DATA;
650 }
651
652 return ret;
653 }
654
do_token_in(USBDevice * dev,USBPacket * p)655 static int do_token_in(USBDevice *dev, USBPacket *p)
656 {
657 USBHostDevice *s = (USBHostDevice *) dev;
658 int ret = 0;
659
660 if (p->devep != 0)
661 return usb_host_handle_data(s, p);
662
663 switch(s->ctrl.state) {
664 case CTRL_STATE_ACK:
665 if (!(s->ctrl.req.bRequestType & USB_DIR_IN)) {
666 ret = usb_host_handle_control(s, p);
667 if (ret == USB_RET_ASYNC)
668 return USB_RET_ASYNC;
669
670 s->ctrl.state = CTRL_STATE_IDLE;
671 return ret > 0 ? 0 : ret;
672 }
673
674 return 0;
675
676 case CTRL_STATE_DATA:
677 if (s->ctrl.req.bRequestType & USB_DIR_IN) {
678 int len = s->ctrl.len - s->ctrl.offset;
679 if (len > p->len)
680 len = p->len;
681 memcpy(p->data, s->ctrl.buffer + s->ctrl.offset, len);
682 s->ctrl.offset += len;
683 if (s->ctrl.offset >= s->ctrl.len)
684 s->ctrl.state = CTRL_STATE_ACK;
685 return len;
686 }
687
688 s->ctrl.state = CTRL_STATE_IDLE;
689 return USB_RET_STALL;
690
691 default:
692 return USB_RET_STALL;
693 }
694 }
695
do_token_out(USBDevice * dev,USBPacket * p)696 static int do_token_out(USBDevice *dev, USBPacket *p)
697 {
698 USBHostDevice *s = (USBHostDevice *) dev;
699
700 if (p->devep != 0)
701 return usb_host_handle_data(s, p);
702
703 switch(s->ctrl.state) {
704 case CTRL_STATE_ACK:
705 if (s->ctrl.req.bRequestType & USB_DIR_IN) {
706 s->ctrl.state = CTRL_STATE_IDLE;
707 /* transfer OK */
708 } else {
709 /* ignore additional output */
710 }
711 return 0;
712
713 case CTRL_STATE_DATA:
714 if (!(s->ctrl.req.bRequestType & USB_DIR_IN)) {
715 int len = s->ctrl.len - s->ctrl.offset;
716 if (len > p->len)
717 len = p->len;
718 memcpy(s->ctrl.buffer + s->ctrl.offset, p->data, len);
719 s->ctrl.offset += len;
720 if (s->ctrl.offset >= s->ctrl.len)
721 s->ctrl.state = CTRL_STATE_ACK;
722 return len;
723 }
724
725 s->ctrl.state = CTRL_STATE_IDLE;
726 return USB_RET_STALL;
727
728 default:
729 return USB_RET_STALL;
730 }
731 }
732
733 /*
734 * Packet handler.
735 * Called by the HC (host controller).
736 *
737 * Returns length of the transaction or one of the USB_RET_XXX codes.
738 */
usb_host_handle_packet(USBDevice * s,USBPacket * p)739 static int usb_host_handle_packet(USBDevice *s, USBPacket *p)
740 {
741 switch(p->pid) {
742 case USB_MSG_ATTACH:
743 s->state = USB_STATE_ATTACHED;
744 return 0;
745
746 case USB_MSG_DETACH:
747 s->state = USB_STATE_NOTATTACHED;
748 return 0;
749
750 case USB_MSG_RESET:
751 s->remote_wakeup = 0;
752 s->addr = 0;
753 s->state = USB_STATE_DEFAULT;
754 s->handle_reset(s);
755 return 0;
756 }
757
758 /* Rest of the PIDs must match our address */
759 if (s->state < USB_STATE_DEFAULT || p->devaddr != s->addr)
760 return USB_RET_NODEV;
761
762 switch (p->pid) {
763 case USB_TOKEN_SETUP:
764 return do_token_setup(s, p);
765
766 case USB_TOKEN_IN:
767 return do_token_in(s, p);
768
769 case USB_TOKEN_OUT:
770 return do_token_out(s, p);
771
772 default:
773 return USB_RET_STALL;
774 }
775 }
776
777 /* returns 1 on problem encountered or 0 for success */
usb_linux_update_endp_table(USBHostDevice * s)778 static int usb_linux_update_endp_table(USBHostDevice *s)
779 {
780 uint8_t *descriptors;
781 uint8_t devep, type, configuration, alt_interface;
782 struct usb_ctrltransfer ct;
783 int interface, ret, length, i;
784
785 ct.bRequestType = USB_DIR_IN;
786 ct.bRequest = USB_REQ_GET_CONFIGURATION;
787 ct.wValue = 0;
788 ct.wIndex = 0;
789 ct.wLength = 1;
790 ct.data = &configuration;
791 ct.timeout = 50;
792
793 ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct);
794 if (ret < 0) {
795 perror("usb_linux_update_endp_table");
796 return 1;
797 }
798
799 /* in address state */
800 if (configuration == 0)
801 return 1;
802
803 /* get the desired configuration, interface, and endpoint descriptors
804 * from device description */
805 descriptors = &s->descr[18];
806 length = s->descr_len - 18;
807 i = 0;
808
809 if (descriptors[i + 1] != USB_DT_CONFIG ||
810 descriptors[i + 5] != configuration) {
811 dprintf("invalid descriptor data - configuration\n");
812 return 1;
813 }
814 i += descriptors[i];
815
816 while (i < length) {
817 if (descriptors[i + 1] != USB_DT_INTERFACE ||
818 (descriptors[i + 1] == USB_DT_INTERFACE &&
819 descriptors[i + 4] == 0)) {
820 i += descriptors[i];
821 continue;
822 }
823
824 interface = descriptors[i + 2];
825
826 ct.bRequestType = USB_DIR_IN | USB_RECIP_INTERFACE;
827 ct.bRequest = USB_REQ_GET_INTERFACE;
828 ct.wValue = 0;
829 ct.wIndex = interface;
830 ct.wLength = 1;
831 ct.data = &alt_interface;
832 ct.timeout = 50;
833
834 ret = ioctl(s->fd, USBDEVFS_CONTROL, &ct);
835 if (ret < 0) {
836 alt_interface = interface;
837 }
838
839 /* the current interface descriptor is the active interface
840 * and has endpoints */
841 if (descriptors[i + 3] != alt_interface) {
842 i += descriptors[i];
843 continue;
844 }
845
846 /* advance to the endpoints */
847 while (i < length && descriptors[i +1] != USB_DT_ENDPOINT)
848 i += descriptors[i];
849
850 if (i >= length)
851 break;
852
853 while (i < length) {
854 if (descriptors[i + 1] != USB_DT_ENDPOINT)
855 break;
856
857 devep = descriptors[i + 2];
858 switch (descriptors[i + 3] & 0x3) {
859 case 0x00:
860 type = USBDEVFS_URB_TYPE_CONTROL;
861 break;
862 case 0x01:
863 type = USBDEVFS_URB_TYPE_ISO;
864 break;
865 case 0x02:
866 type = USBDEVFS_URB_TYPE_BULK;
867 break;
868 case 0x03:
869 type = USBDEVFS_URB_TYPE_INTERRUPT;
870 break;
871 default:
872 dprintf("usb_host: malformed endpoint type\n");
873 type = USBDEVFS_URB_TYPE_BULK;
874 }
875 s->endp_table[(devep & 0xf) - 1].type = type;
876 s->endp_table[(devep & 0xf) - 1].halted = 0;
877
878 i += descriptors[i];
879 }
880 }
881 return 0;
882 }
883
usb_host_device_open_addr(int bus_num,int addr,const char * prod_name)884 static USBDevice *usb_host_device_open_addr(int bus_num, int addr, const char *prod_name)
885 {
886 int fd = -1, ret;
887 USBHostDevice *dev = NULL;
888 struct usbdevfs_connectinfo ci;
889 char buf[1024];
890
891 dev = qemu_mallocz(sizeof(USBHostDevice));
892
893 dev->bus_num = bus_num;
894 dev->addr = addr;
895
896 printf("husb: open device %d.%d\n", bus_num, addr);
897
898 if (!usb_host_device_path) {
899 perror("husb: USB Host Device Path not set");
900 goto fail;
901 }
902 snprintf(buf, sizeof(buf), "%s/%03d/%03d", usb_host_device_path,
903 bus_num, addr);
904 fd = open(buf, O_RDWR | O_NONBLOCK);
905 if (fd < 0) {
906 perror(buf);
907 goto fail;
908 }
909 dprintf("husb: opened %s\n", buf);
910
911 /* read the device description */
912 dev->descr_len = read(fd, dev->descr, sizeof(dev->descr));
913 if (dev->descr_len <= 0) {
914 perror("husb: reading device data failed");
915 goto fail;
916 }
917
918 #ifdef DEBUG
919 {
920 int x;
921 printf("=== begin dumping device descriptor data ===\n");
922 for (x = 0; x < dev->descr_len; x++)
923 printf("%02x ", dev->descr[x]);
924 printf("\n=== end dumping device descriptor data ===\n");
925 }
926 #endif
927
928 dev->fd = fd;
929
930 /*
931 * Initial configuration is -1 which makes us claim first
932 * available config. We used to start with 1, which does not
933 * always work. I've seen devices where first config starts
934 * with 2.
935 */
936 if (!usb_host_claim_interfaces(dev, -1))
937 goto fail;
938
939 ret = ioctl(fd, USBDEVFS_CONNECTINFO, &ci);
940 if (ret < 0) {
941 perror("usb_host_device_open: USBDEVFS_CONNECTINFO");
942 goto fail;
943 }
944
945 printf("husb: grabbed usb device %d.%d\n", bus_num, addr);
946
947 ret = usb_linux_update_endp_table(dev);
948 if (ret)
949 goto fail;
950
951 if (ci.slow)
952 dev->dev.speed = USB_SPEED_LOW;
953 else
954 dev->dev.speed = USB_SPEED_HIGH;
955
956 dev->dev.handle_packet = usb_host_handle_packet;
957 dev->dev.handle_reset = usb_host_handle_reset;
958 dev->dev.handle_destroy = usb_host_handle_destroy;
959
960 if (!prod_name || prod_name[0] == '\0')
961 snprintf(dev->dev.devname, sizeof(dev->dev.devname),
962 "host:%d.%d", bus_num, addr);
963 else
964 pstrcpy(dev->dev.devname, sizeof(dev->dev.devname),
965 prod_name);
966
967 /* USB devio uses 'write' flag to check for async completions */
968 qemu_set_fd_handler(dev->fd, NULL, async_complete, dev);
969
970 hostdev_link(dev);
971
972 return (USBDevice *) dev;
973
974 fail:
975 if (dev)
976 qemu_free(dev);
977
978 close(fd);
979 return NULL;
980 }
981
982 static int usb_host_auto_add(const char *spec);
983 static int usb_host_auto_del(const char *spec);
984
usb_host_device_open(const char * devname)985 USBDevice *usb_host_device_open(const char *devname)
986 {
987 Monitor *mon = cur_mon;
988 int bus_num, addr;
989 char product_name[PRODUCT_NAME_SZ];
990
991 if (strstr(devname, "auto:")) {
992 usb_host_auto_add(devname);
993 return NULL;
994 }
995
996 if (usb_host_find_device(&bus_num, &addr, product_name, sizeof(product_name),
997 devname) < 0)
998 return NULL;
999
1000 if (hostdev_find(bus_num, addr)) {
1001 monitor_printf(mon, "husb: host usb device %d.%d is already open\n",
1002 bus_num, addr);
1003 return NULL;
1004 }
1005
1006 return usb_host_device_open_addr(bus_num, addr, product_name);
1007 }
1008
usb_host_device_close(const char * devname)1009 int usb_host_device_close(const char *devname)
1010 {
1011 char product_name[PRODUCT_NAME_SZ];
1012 int bus_num, addr;
1013 USBHostDevice *s;
1014
1015 if (strstr(devname, "auto:"))
1016 return usb_host_auto_del(devname);
1017
1018 if (usb_host_find_device(&bus_num, &addr, product_name, sizeof(product_name),
1019 devname) < 0)
1020 return -1;
1021
1022 s = hostdev_find(bus_num, addr);
1023 if (s) {
1024 usb_device_del_addr(0, s->dev.addr);
1025 return 0;
1026 }
1027
1028 return -1;
1029 }
1030
get_tag_value(char * buf,int buf_size,const char * str,const char * tag,const char * stopchars)1031 static int get_tag_value(char *buf, int buf_size,
1032 const char *str, const char *tag,
1033 const char *stopchars)
1034 {
1035 const char *p;
1036 char *q;
1037 p = strstr(str, tag);
1038 if (!p)
1039 return -1;
1040 p += strlen(tag);
1041 while (qemu_isspace(*p))
1042 p++;
1043 q = buf;
1044 while (*p != '\0' && !strchr(stopchars, *p)) {
1045 if ((q - buf) < (buf_size - 1))
1046 *q++ = *p;
1047 p++;
1048 }
1049 *q = '\0';
1050 return q - buf;
1051 }
1052
1053 /*
1054 * Use /proc/bus/usb/devices or /dev/bus/usb/devices file to determine
1055 * host's USB devices. This is legacy support since many distributions
1056 * are moving to /sys/bus/usb
1057 */
usb_host_scan_dev(void * opaque,USBScanFunc * func)1058 static int usb_host_scan_dev(void *opaque, USBScanFunc *func)
1059 {
1060 FILE *f = 0;
1061 char line[1024];
1062 char buf[1024];
1063 int bus_num, addr, speed, device_count, class_id, product_id, vendor_id;
1064 char product_name[512];
1065 int ret = 0;
1066
1067 if (!usb_host_device_path) {
1068 perror("husb: USB Host Device Path not set");
1069 goto the_end;
1070 }
1071 snprintf(line, sizeof(line), "%s/devices", usb_host_device_path);
1072 f = fopen(line, "r");
1073 if (!f) {
1074 perror("husb: cannot open devices file");
1075 goto the_end;
1076 }
1077
1078 device_count = 0;
1079 bus_num = addr = speed = class_id = product_id = vendor_id = 0;
1080 for(;;) {
1081 if (fgets(line, sizeof(line), f) == NULL)
1082 break;
1083 if (strlen(line) > 0)
1084 line[strlen(line) - 1] = '\0';
1085 if (line[0] == 'T' && line[1] == ':') {
1086 if (device_count && (vendor_id || product_id)) {
1087 /* New device. Add the previously discovered device. */
1088 ret = func(opaque, bus_num, addr, class_id, vendor_id,
1089 product_id, product_name, speed);
1090 if (ret)
1091 goto the_end;
1092 }
1093 if (get_tag_value(buf, sizeof(buf), line, "Bus=", " ") < 0)
1094 goto fail;
1095 bus_num = atoi(buf);
1096 if (get_tag_value(buf, sizeof(buf), line, "Dev#=", " ") < 0)
1097 goto fail;
1098 addr = atoi(buf);
1099 if (get_tag_value(buf, sizeof(buf), line, "Spd=", " ") < 0)
1100 goto fail;
1101 if (!strcmp(buf, "480"))
1102 speed = USB_SPEED_HIGH;
1103 else if (!strcmp(buf, "1.5"))
1104 speed = USB_SPEED_LOW;
1105 else
1106 speed = USB_SPEED_FULL;
1107 product_name[0] = '\0';
1108 class_id = 0xff;
1109 device_count++;
1110 product_id = 0;
1111 vendor_id = 0;
1112 } else if (line[0] == 'P' && line[1] == ':') {
1113 if (get_tag_value(buf, sizeof(buf), line, "Vendor=", " ") < 0)
1114 goto fail;
1115 vendor_id = strtoul(buf, NULL, 16);
1116 if (get_tag_value(buf, sizeof(buf), line, "ProdID=", " ") < 0)
1117 goto fail;
1118 product_id = strtoul(buf, NULL, 16);
1119 } else if (line[0] == 'S' && line[1] == ':') {
1120 if (get_tag_value(buf, sizeof(buf), line, "Product=", "") < 0)
1121 goto fail;
1122 pstrcpy(product_name, sizeof(product_name), buf);
1123 } else if (line[0] == 'D' && line[1] == ':') {
1124 if (get_tag_value(buf, sizeof(buf), line, "Cls=", " (") < 0)
1125 goto fail;
1126 class_id = strtoul(buf, NULL, 16);
1127 }
1128 fail: ;
1129 }
1130 if (device_count && (vendor_id || product_id)) {
1131 /* Add the last device. */
1132 ret = func(opaque, bus_num, addr, class_id, vendor_id,
1133 product_id, product_name, speed);
1134 }
1135 the_end:
1136 if (f)
1137 fclose(f);
1138 return ret;
1139 }
1140
1141 /*
1142 * Read sys file-system device file
1143 *
1144 * @line address of buffer to put file contents in
1145 * @line_size size of line
1146 * @device_file path to device file (printf format string)
1147 * @device_name device being opened (inserted into device_file)
1148 *
1149 * @return 0 failed, 1 succeeded ('line' contains data)
1150 */
usb_host_read_file(char * line,size_t line_size,const char * device_file,const char * device_name)1151 static int usb_host_read_file(char *line, size_t line_size, const char *device_file, const char *device_name)
1152 {
1153 Monitor *mon = cur_mon;
1154 FILE *f;
1155 int ret = 0;
1156 char filename[PATH_MAX];
1157
1158 snprintf(filename, PATH_MAX, USBSYSBUS_PATH "/devices/%s/%s", device_name,
1159 device_file);
1160 f = fopen(filename, "r");
1161 if (f) {
1162 ret = (fgets(line, line_size, f) != NULL);
1163 fclose(f);
1164 } else {
1165 monitor_printf(mon, "husb: could not open %s\n", filename);
1166 }
1167
1168 return ret;
1169 }
1170
1171 /*
1172 * Use /sys/bus/usb/devices/ directory to determine host's USB
1173 * devices.
1174 *
1175 * This code is based on Robert Schiele's original patches posted to
1176 * the Novell bug-tracker https://bugzilla.novell.com/show_bug.cgi?id=241950
1177 */
usb_host_scan_sys(void * opaque,USBScanFunc * func)1178 static int usb_host_scan_sys(void *opaque, USBScanFunc *func)
1179 {
1180 DIR *dir = 0;
1181 char line[1024];
1182 int bus_num, addr, speed, class_id, product_id, vendor_id;
1183 int ret = 0;
1184 char product_name[512];
1185 struct dirent *de;
1186
1187 dir = opendir(USBSYSBUS_PATH "/devices");
1188 if (!dir) {
1189 perror("husb: cannot open devices directory");
1190 goto the_end;
1191 }
1192
1193 while ((de = readdir(dir))) {
1194 if (de->d_name[0] != '.' && !strchr(de->d_name, ':')) {
1195 char *tmpstr = de->d_name;
1196 if (!strncmp(de->d_name, "usb", 3))
1197 tmpstr += 3;
1198 bus_num = atoi(tmpstr);
1199
1200 if (!usb_host_read_file(line, sizeof(line), "devnum", de->d_name))
1201 goto the_end;
1202 if (sscanf(line, "%d", &addr) != 1)
1203 goto the_end;
1204
1205 if (!usb_host_read_file(line, sizeof(line), "bDeviceClass",
1206 de->d_name))
1207 goto the_end;
1208 if (sscanf(line, "%x", &class_id) != 1)
1209 goto the_end;
1210
1211 if (!usb_host_read_file(line, sizeof(line), "idVendor", de->d_name))
1212 goto the_end;
1213 if (sscanf(line, "%x", &vendor_id) != 1)
1214 goto the_end;
1215
1216 if (!usb_host_read_file(line, sizeof(line), "idProduct",
1217 de->d_name))
1218 goto the_end;
1219 if (sscanf(line, "%x", &product_id) != 1)
1220 goto the_end;
1221
1222 if (!usb_host_read_file(line, sizeof(line), "product",
1223 de->d_name)) {
1224 *product_name = 0;
1225 } else {
1226 if (strlen(line) > 0)
1227 line[strlen(line) - 1] = '\0';
1228 pstrcpy(product_name, sizeof(product_name), line);
1229 }
1230
1231 if (!usb_host_read_file(line, sizeof(line), "speed", de->d_name))
1232 goto the_end;
1233 if (!strcmp(line, "480\n"))
1234 speed = USB_SPEED_HIGH;
1235 else if (!strcmp(line, "1.5\n"))
1236 speed = USB_SPEED_LOW;
1237 else
1238 speed = USB_SPEED_FULL;
1239
1240 ret = func(opaque, bus_num, addr, class_id, vendor_id,
1241 product_id, product_name, speed);
1242 if (ret)
1243 goto the_end;
1244 }
1245 }
1246 the_end:
1247 if (dir)
1248 closedir(dir);
1249 return ret;
1250 }
1251
1252 /*
1253 * Determine how to access the host's USB devices and call the
1254 * specific support function.
1255 */
usb_host_scan(void * opaque,USBScanFunc * func)1256 static int usb_host_scan(void *opaque, USBScanFunc *func)
1257 {
1258 Monitor *mon = cur_mon;
1259 FILE *f = 0;
1260 DIR *dir = 0;
1261 int ret = 0;
1262 const char *fs_type[] = {"unknown", "proc", "dev", "sys"};
1263 char devpath[PATH_MAX];
1264
1265 /* only check the host once */
1266 if (!usb_fs_type) {
1267 f = fopen(USBPROCBUS_PATH "/devices", "r");
1268 if (f) {
1269 /* devices found in /proc/bus/usb/ */
1270 strcpy(devpath, USBPROCBUS_PATH);
1271 usb_fs_type = USB_FS_PROC;
1272 fclose(f);
1273 dprintf(USBDBG_DEVOPENED, USBPROCBUS_PATH);
1274 goto found_devices;
1275 }
1276 /* try additional methods if an access method hasn't been found yet */
1277 f = fopen(USBDEVBUS_PATH "/devices", "r");
1278 if (f) {
1279 /* devices found in /dev/bus/usb/ */
1280 strcpy(devpath, USBDEVBUS_PATH);
1281 usb_fs_type = USB_FS_DEV;
1282 fclose(f);
1283 dprintf(USBDBG_DEVOPENED, USBDEVBUS_PATH);
1284 goto found_devices;
1285 }
1286 dir = opendir(USBSYSBUS_PATH "/devices");
1287 if (dir) {
1288 /* devices found in /dev/bus/usb/ (yes - not a mistake!) */
1289 strcpy(devpath, USBDEVBUS_PATH);
1290 usb_fs_type = USB_FS_SYS;
1291 closedir(dir);
1292 dprintf(USBDBG_DEVOPENED, USBSYSBUS_PATH);
1293 goto found_devices;
1294 }
1295 found_devices:
1296 if (!usb_fs_type) {
1297 monitor_printf(mon, "husb: unable to access USB devices\n");
1298 return -ENOENT;
1299 }
1300
1301 /* the module setting (used later for opening devices) */
1302 usb_host_device_path = qemu_mallocz(strlen(devpath)+1);
1303 strcpy(usb_host_device_path, devpath);
1304 monitor_printf(mon, "husb: using %s file-system with %s\n",
1305 fs_type[usb_fs_type], usb_host_device_path);
1306 }
1307
1308 switch (usb_fs_type) {
1309 case USB_FS_PROC:
1310 case USB_FS_DEV:
1311 ret = usb_host_scan_dev(opaque, func);
1312 break;
1313 case USB_FS_SYS:
1314 ret = usb_host_scan_sys(opaque, func);
1315 break;
1316 default:
1317 ret = -EINVAL;
1318 break;
1319 }
1320 return ret;
1321 }
1322
1323 struct USBAutoFilter {
1324 struct USBAutoFilter *next;
1325 int bus_num;
1326 int addr;
1327 int vendor_id;
1328 int product_id;
1329 };
1330
1331 static QEMUTimer *usb_auto_timer;
1332 static struct USBAutoFilter *usb_auto_filter;
1333
usb_host_auto_scan(void * opaque,int bus_num,int addr,int class_id,int vendor_id,int product_id,const char * product_name,int speed)1334 static int usb_host_auto_scan(void *opaque, int bus_num, int addr,
1335 int class_id, int vendor_id, int product_id,
1336 const char *product_name, int speed)
1337 {
1338 struct USBAutoFilter *f;
1339 struct USBDevice *dev;
1340
1341 /* Ignore hubs */
1342 if (class_id == 9)
1343 return 0;
1344
1345 for (f = usb_auto_filter; f; f = f->next) {
1346 if (f->bus_num >= 0 && f->bus_num != bus_num)
1347 continue;
1348
1349 if (f->addr >= 0 && f->addr != addr)
1350 continue;
1351
1352 if (f->vendor_id >= 0 && f->vendor_id != vendor_id)
1353 continue;
1354
1355 if (f->product_id >= 0 && f->product_id != product_id)
1356 continue;
1357
1358 /* We got a match */
1359
1360 /* Allredy attached ? */
1361 if (hostdev_find(bus_num, addr))
1362 return 0;
1363
1364 dprintf("husb: auto open: bus_num %d addr %d\n", bus_num, addr);
1365
1366 dev = usb_host_device_open_addr(bus_num, addr, product_name);
1367 if (dev)
1368 usb_device_add_dev(dev);
1369 }
1370
1371 return 0;
1372 }
1373
usb_host_auto_timer(void * unused)1374 static void usb_host_auto_timer(void *unused)
1375 {
1376 usb_host_scan(NULL, usb_host_auto_scan);
1377 qemu_mod_timer(usb_auto_timer, qemu_get_clock_ms(rt_clock) + 2000);
1378 }
1379
1380 /*
1381 * Autoconnect filter
1382 * Format:
1383 * auto:bus:dev[:vid:pid]
1384 * auto:bus.dev[:vid:pid]
1385 *
1386 * bus - bus number (dec, * means any)
1387 * dev - device number (dec, * means any)
1388 * vid - vendor id (hex, * means any)
1389 * pid - product id (hex, * means any)
1390 *
1391 * See 'lsusb' output.
1392 */
parse_filter(const char * spec,struct USBAutoFilter * f)1393 static int parse_filter(const char *spec, struct USBAutoFilter *f)
1394 {
1395 enum { BUS, DEV, VID, PID, DONE };
1396 const char *p = spec;
1397 int i;
1398
1399 f->bus_num = -1;
1400 f->addr = -1;
1401 f->vendor_id = -1;
1402 f->product_id = -1;
1403
1404 for (i = BUS; i < DONE; i++) {
1405 p = strpbrk(p, ":.");
1406 if (!p) break;
1407 p++;
1408
1409 if (*p == '*')
1410 continue;
1411
1412 switch(i) {
1413 case BUS: f->bus_num = strtol(p, NULL, 10); break;
1414 case DEV: f->addr = strtol(p, NULL, 10); break;
1415 case VID: f->vendor_id = strtol(p, NULL, 16); break;
1416 case PID: f->product_id = strtol(p, NULL, 16); break;
1417 }
1418 }
1419
1420 if (i < DEV) {
1421 fprintf(stderr, "husb: invalid auto filter spec %s\n", spec);
1422 return -1;
1423 }
1424
1425 return 0;
1426 }
1427
match_filter(const struct USBAutoFilter * f1,const struct USBAutoFilter * f2)1428 static int match_filter(const struct USBAutoFilter *f1,
1429 const struct USBAutoFilter *f2)
1430 {
1431 return f1->bus_num == f2->bus_num &&
1432 f1->addr == f2->addr &&
1433 f1->vendor_id == f2->vendor_id &&
1434 f1->product_id == f2->product_id;
1435 }
1436
usb_host_auto_add(const char * spec)1437 static int usb_host_auto_add(const char *spec)
1438 {
1439 struct USBAutoFilter filter, *f;
1440
1441 if (parse_filter(spec, &filter) < 0)
1442 return -1;
1443
1444 f = qemu_mallocz(sizeof(*f));
1445
1446 *f = filter;
1447
1448 if (!usb_auto_filter) {
1449 /*
1450 * First entry. Init and start the monitor.
1451 * Right now we're using timer to check for new devices.
1452 * If this turns out to be too expensive we can move that into a
1453 * separate thread.
1454 */
1455 usb_auto_timer = qemu_new_timer_ms(rt_clock, usb_host_auto_timer, NULL);
1456 if (!usb_auto_timer) {
1457 fprintf(stderr, "husb: failed to allocate auto scan timer\n");
1458 qemu_free(f);
1459 return -1;
1460 }
1461
1462 /* Check for new devices every two seconds */
1463 qemu_mod_timer(usb_auto_timer, qemu_get_clock_ms(rt_clock) + 2000);
1464 }
1465
1466 dprintf("husb: added auto filter: bus_num %d addr %d vid %d pid %d\n",
1467 f->bus_num, f->addr, f->vendor_id, f->product_id);
1468
1469 f->next = usb_auto_filter;
1470 usb_auto_filter = f;
1471
1472 return 0;
1473 }
1474
usb_host_auto_del(const char * spec)1475 static int usb_host_auto_del(const char *spec)
1476 {
1477 struct USBAutoFilter *pf = usb_auto_filter;
1478 struct USBAutoFilter **prev = &usb_auto_filter;
1479 struct USBAutoFilter filter;
1480
1481 if (parse_filter(spec, &filter) < 0)
1482 return -1;
1483
1484 while (pf) {
1485 if (match_filter(pf, &filter)) {
1486 dprintf("husb: removed auto filter: bus_num %d addr %d vid %d pid %d\n",
1487 pf->bus_num, pf->addr, pf->vendor_id, pf->product_id);
1488
1489 *prev = pf->next;
1490
1491 if (!usb_auto_filter) {
1492 /* No more filters. Stop scanning. */
1493 qemu_del_timer(usb_auto_timer);
1494 qemu_free_timer(usb_auto_timer);
1495 }
1496
1497 return 0;
1498 }
1499
1500 prev = &pf->next;
1501 pf = pf->next;
1502 }
1503
1504 return -1;
1505 }
1506
1507 typedef struct FindDeviceState {
1508 int vendor_id;
1509 int product_id;
1510 int bus_num;
1511 int addr;
1512 char product_name[PRODUCT_NAME_SZ];
1513 } FindDeviceState;
1514
usb_host_find_device_scan(void * opaque,int bus_num,int addr,int class_id,int vendor_id,int product_id,const char * product_name,int speed)1515 static int usb_host_find_device_scan(void *opaque, int bus_num, int addr,
1516 int class_id,
1517 int vendor_id, int product_id,
1518 const char *product_name, int speed)
1519 {
1520 FindDeviceState *s = opaque;
1521 if ((vendor_id == s->vendor_id &&
1522 product_id == s->product_id) ||
1523 (bus_num == s->bus_num &&
1524 addr == s->addr)) {
1525 pstrcpy(s->product_name, PRODUCT_NAME_SZ, product_name);
1526 s->bus_num = bus_num;
1527 s->addr = addr;
1528 return 1;
1529 } else {
1530 return 0;
1531 }
1532 }
1533
1534 /* the syntax is :
1535 'bus.addr' (decimal numbers) or
1536 'vendor_id:product_id' (hexa numbers) */
usb_host_find_device(int * pbus_num,int * paddr,char * product_name,int product_name_size,const char * devname)1537 static int usb_host_find_device(int *pbus_num, int *paddr,
1538 char *product_name, int product_name_size,
1539 const char *devname)
1540 {
1541 const char *p;
1542 int ret;
1543 FindDeviceState fs;
1544
1545 p = strchr(devname, '.');
1546 if (p) {
1547 *pbus_num = strtoul(devname, NULL, 0);
1548 *paddr = strtoul(p + 1, NULL, 0);
1549 fs.bus_num = *pbus_num;
1550 fs.addr = *paddr;
1551 ret = usb_host_scan(&fs, usb_host_find_device_scan);
1552 if (ret)
1553 pstrcpy(product_name, product_name_size, fs.product_name);
1554 return 0;
1555 }
1556
1557 p = strchr(devname, ':');
1558 if (p) {
1559 fs.vendor_id = strtoul(devname, NULL, 16);
1560 fs.product_id = strtoul(p + 1, NULL, 16);
1561 ret = usb_host_scan(&fs, usb_host_find_device_scan);
1562 if (ret) {
1563 *pbus_num = fs.bus_num;
1564 *paddr = fs.addr;
1565 pstrcpy(product_name, product_name_size, fs.product_name);
1566 return 0;
1567 }
1568 }
1569 return -1;
1570 }
1571
1572 /**********************/
1573 /* USB host device info */
1574
1575 struct usb_class_info {
1576 int class;
1577 const char *class_name;
1578 };
1579
1580 static const struct usb_class_info usb_class_info[] = {
1581 { USB_CLASS_AUDIO, "Audio"},
1582 { USB_CLASS_COMM, "Communication"},
1583 { USB_CLASS_HID, "HID"},
1584 { USB_CLASS_HUB, "Hub" },
1585 { USB_CLASS_PHYSICAL, "Physical" },
1586 { USB_CLASS_PRINTER, "Printer" },
1587 { USB_CLASS_MASS_STORAGE, "Storage" },
1588 { USB_CLASS_CDC_DATA, "Data" },
1589 { USB_CLASS_APP_SPEC, "Application Specific" },
1590 { USB_CLASS_VENDOR_SPEC, "Vendor Specific" },
1591 { USB_CLASS_STILL_IMAGE, "Still Image" },
1592 { USB_CLASS_CSCID, "Smart Card" },
1593 { USB_CLASS_CONTENT_SEC, "Content Security" },
1594 { -1, NULL }
1595 };
1596
usb_class_str(uint8_t class)1597 static const char *usb_class_str(uint8_t class)
1598 {
1599 const struct usb_class_info *p;
1600 for(p = usb_class_info; p->class != -1; p++) {
1601 if (p->class == class)
1602 break;
1603 }
1604 return p->class_name;
1605 }
1606
usb_info_device(int bus_num,int addr,int class_id,int vendor_id,int product_id,const char * product_name,int speed)1607 static void usb_info_device(int bus_num, int addr, int class_id,
1608 int vendor_id, int product_id,
1609 const char *product_name,
1610 int speed)
1611 {
1612 Monitor *mon = cur_mon;
1613 const char *class_str, *speed_str;
1614
1615 switch(speed) {
1616 case USB_SPEED_LOW:
1617 speed_str = "1.5";
1618 break;
1619 case USB_SPEED_FULL:
1620 speed_str = "12";
1621 break;
1622 case USB_SPEED_HIGH:
1623 speed_str = "480";
1624 break;
1625 default:
1626 speed_str = "?";
1627 break;
1628 }
1629
1630 monitor_printf(mon, " Device %d.%d, speed %s Mb/s\n",
1631 bus_num, addr, speed_str);
1632 class_str = usb_class_str(class_id);
1633 if (class_str)
1634 monitor_printf(mon, " %s:", class_str);
1635 else
1636 monitor_printf(mon, " Class %02x:", class_id);
1637 monitor_printf(mon, " USB device %04x:%04x", vendor_id, product_id);
1638 if (product_name[0] != '\0')
1639 monitor_printf(mon, ", %s", product_name);
1640 monitor_printf(mon, "\n");
1641 }
1642
usb_host_info_device(void * opaque,int bus_num,int addr,int class_id,int vendor_id,int product_id,const char * product_name,int speed)1643 static int usb_host_info_device(void *opaque, int bus_num, int addr,
1644 int class_id,
1645 int vendor_id, int product_id,
1646 const char *product_name,
1647 int speed)
1648 {
1649 usb_info_device(bus_num, addr, class_id, vendor_id, product_id,
1650 product_name, speed);
1651 return 0;
1652 }
1653
dec2str(int val,char * str,size_t size)1654 static void dec2str(int val, char *str, size_t size)
1655 {
1656 if (val == -1)
1657 snprintf(str, size, "*");
1658 else
1659 snprintf(str, size, "%d", val);
1660 }
1661
hex2str(int val,char * str,size_t size)1662 static void hex2str(int val, char *str, size_t size)
1663 {
1664 if (val == -1)
1665 snprintf(str, size, "*");
1666 else
1667 snprintf(str, size, "%x", val);
1668 }
1669
usb_host_info(Monitor * mon)1670 void usb_host_info(Monitor *mon)
1671 {
1672 struct USBAutoFilter *f;
1673
1674 usb_host_scan(NULL, usb_host_info_device);
1675
1676 if (usb_auto_filter)
1677 monitor_printf(mon, " Auto filters:\n");
1678 for (f = usb_auto_filter; f; f = f->next) {
1679 char bus[10], addr[10], vid[10], pid[10];
1680 dec2str(f->bus_num, bus, sizeof(bus));
1681 dec2str(f->addr, addr, sizeof(addr));
1682 hex2str(f->vendor_id, vid, sizeof(vid));
1683 hex2str(f->product_id, pid, sizeof(pid));
1684 monitor_printf(mon, " Device %s.%s ID %s:%s\n",
1685 bus, addr, vid, pid);
1686 }
1687 }
1688