1 /* 2 * linux/include/asm-arm/arch-omap/irqs.h 3 * 4 * Copyright (C) Greg Lonnon 2001 5 * Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 20 * 21 * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610 22 * are different. 23 */ 24 25 #ifndef __ASM_ARCH_OMAP15XX_IRQS_H 26 #define __ASM_ARCH_OMAP15XX_IRQS_H 27 28 /* 29 * IRQ numbers for interrupt handler 1 30 * 31 * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below 32 * 33 */ 34 #define INT_CAMERA 1 35 #define INT_FIQ 3 36 #define INT_RTDX 6 37 #define INT_DSP_MMU_ABORT 7 38 #define INT_HOST 8 39 #define INT_ABORT 9 40 #define INT_DSP_MAILBOX1 10 41 #define INT_DSP_MAILBOX2 11 42 #define INT_BRIDGE_PRIV 13 43 #define INT_GPIO_BANK1 14 44 #define INT_UART3 15 45 #define INT_TIMER3 16 46 #define INT_DMA_CH0_6 19 47 #define INT_DMA_CH1_7 20 48 #define INT_DMA_CH2_8 21 49 #define INT_DMA_CH3 22 50 #define INT_DMA_CH4 23 51 #define INT_DMA_CH5 24 52 #define INT_DMA_LCD 25 53 #define INT_TIMER1 26 54 #define INT_WD_TIMER 27 55 #define INT_BRIDGE_PUB 28 56 #define INT_TIMER2 30 57 #define INT_LCD_CTRL 31 58 59 /* 60 * OMAP-1510 specific IRQ numbers for interrupt handler 1 61 */ 62 #define INT_1510_IH2_IRQ 0 63 #define INT_1510_RES2 2 64 #define INT_1510_SPI_TX 4 65 #define INT_1510_SPI_RX 5 66 #define INT_1510_RES12 12 67 #define INT_1510_LB_MMU 17 68 #define INT_1510_RES18 18 69 #define INT_1510_LOCAL_BUS 29 70 71 /* 72 * OMAP-1610 specific IRQ numbers for interrupt handler 1 73 */ 74 #define INT_1610_IH2_IRQ 0 75 #define INT_1610_IH2_FIQ 2 76 #define INT_1610_McBSP2_TX 4 77 #define INT_1610_McBSP2_RX 5 78 #define INT_1610_LCD_LINE 12 79 #define INT_1610_GPTIMER1 17 80 #define INT_1610_GPTIMER2 18 81 #define INT_1610_SSR_FIFO_0 29 82 83 /* 84 * OMAP-730 specific IRQ numbers for interrupt handler 1 85 */ 86 #define INT_730_IH2_FIQ 0 87 #define INT_730_IH2_IRQ 1 88 #define INT_730_USB_NON_ISO 2 89 #define INT_730_USB_ISO 3 90 #define INT_730_ICR 4 91 #define INT_730_EAC 5 92 #define INT_730_GPIO_BANK1 6 93 #define INT_730_GPIO_BANK2 7 94 #define INT_730_GPIO_BANK3 8 95 #define INT_730_McBSP2TX 10 96 #define INT_730_McBSP2RX 11 97 #define INT_730_McBSP2RX_OVF 12 98 #define INT_730_LCD_LINE 14 99 #define INT_730_GSM_PROTECT 15 100 #define INT_730_TIMER3 16 101 #define INT_730_GPIO_BANK5 17 102 #define INT_730_GPIO_BANK6 18 103 #define INT_730_SPGIO_WR 29 104 105 /* 106 * IRQ numbers for interrupt handler 2 107 * 108 * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below 109 */ 110 #define IH2_BASE 32 111 112 #define INT_KEYBOARD (1 + IH2_BASE) 113 #define INT_uWireTX (2 + IH2_BASE) 114 #define INT_uWireRX (3 + IH2_BASE) 115 #define INT_I2C (4 + IH2_BASE) 116 #define INT_MPUIO (5 + IH2_BASE) 117 #define INT_USB_HHC_1 (6 + IH2_BASE) 118 #define INT_McBSP3TX (10 + IH2_BASE) 119 #define INT_McBSP3RX (11 + IH2_BASE) 120 #define INT_McBSP1TX (12 + IH2_BASE) 121 #define INT_McBSP1RX (13 + IH2_BASE) 122 #define INT_UART2 (14 + IH2_BASE) 123 #define INT_UART1 (15 + IH2_BASE) 124 #define INT_BT_MCSI1TX (16 + IH2_BASE) 125 #define INT_BT_MCSI1RX (17 + IH2_BASE) 126 #define INT_USB_W2FC (20 + IH2_BASE) 127 #define INT_1WIRE (21 + IH2_BASE) 128 #define INT_OS_TIMER (22 + IH2_BASE) 129 #define INT_MMC (23 + IH2_BASE) 130 #define INT_GAUGE_32K (24 + IH2_BASE) 131 #define INT_RTC_TIMER (25 + IH2_BASE) 132 #define INT_RTC_ALARM (26 + IH2_BASE) 133 #define INT_MEM_STICK (27 + IH2_BASE) 134 #define INT_DSP_MMU (28 + IH2_BASE) 135 136 /* 137 * OMAP-1510 specific IRQ numbers for interrupt handler 2 138 */ 139 #define INT_1510_COM_SPI_RO (31 + IH2_BASE) 140 141 /* 142 * OMAP-1610 specific IRQ numbers for interrupt handler 2 143 */ 144 #define INT_1610_FAC (0 + IH2_BASE) 145 #define INT_1610_USB_HHC_2 (7 + IH2_BASE) 146 #define INT_1610_USB_OTG (8 + IH2_BASE) 147 #define INT_1610_SoSSI (9 + IH2_BASE) 148 #define INT_1610_SoSSI_MATCH (19 + IH2_BASE) 149 #define INT_1610_McBSP2RX_OF (31 + IH2_BASE) 150 #define INT_1610_STI (32 + IH2_BASE) 151 #define INT_1610_STI_WAKEUP (33 + IH2_BASE) 152 #define INT_1610_GPTIMER3 (34 + IH2_BASE) 153 #define INT_1610_GPTIMER4 (35 + IH2_BASE) 154 #define INT_1610_GPTIMER5 (36 + IH2_BASE) 155 #define INT_1610_GPTIMER6 (37 + IH2_BASE) 156 #define INT_1610_GPTIMER7 (38 + IH2_BASE) 157 #define INT_1610_GPTIMER8 (39 + IH2_BASE) 158 #define INT_1610_GPIO_BANK2 (40 + IH2_BASE) 159 #define INT_1610_GPIO_BANK3 (41 + IH2_BASE) 160 #define INT_1610_MMC2 (42 + IH2_BASE) 161 #define INT_1610_CF (43 + IH2_BASE) 162 #define INT_1610_WAKE_UP_REQ (46 + IH2_BASE) 163 #define INT_1610_GPIO_BANK4 (48 + IH2_BASE) 164 #define INT_1610_SPI (49 + IH2_BASE) 165 #define INT_1610_DMA_CH6 (53 + IH2_BASE) 166 #define INT_1610_DMA_CH7 (54 + IH2_BASE) 167 #define INT_1610_DMA_CH8 (55 + IH2_BASE) 168 #define INT_1610_DMA_CH9 (56 + IH2_BASE) 169 #define INT_1610_DMA_CH10 (57 + IH2_BASE) 170 #define INT_1610_DMA_CH11 (58 + IH2_BASE) 171 #define INT_1610_DMA_CH12 (59 + IH2_BASE) 172 #define INT_1610_DMA_CH13 (60 + IH2_BASE) 173 #define INT_1610_DMA_CH14 (61 + IH2_BASE) 174 #define INT_1610_DMA_CH15 (62 + IH2_BASE) 175 #define INT_1610_NAND (63 + IH2_BASE) 176 177 /* 178 * OMAP-730 specific IRQ numbers for interrupt handler 2 179 */ 180 #define INT_730_HW_ERRORS (0 + IH2_BASE) 181 #define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) 182 #define INT_730_CFCD (2 + IH2_BASE) 183 #define INT_730_CFIREQ (3 + IH2_BASE) 184 #define INT_730_I2C (4 + IH2_BASE) 185 #define INT_730_PCC (5 + IH2_BASE) 186 #define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) 187 #define INT_730_SPI_100K_1 (7 + IH2_BASE) 188 #define INT_730_SYREN_SPI (8 + IH2_BASE) 189 #define INT_730_VLYNQ (9 + IH2_BASE) 190 #define INT_730_GPIO_BANK4 (10 + IH2_BASE) 191 #define INT_730_McBSP1TX (11 + IH2_BASE) 192 #define INT_730_McBSP1RX (12 + IH2_BASE) 193 #define INT_730_McBSP1RX_OF (13 + IH2_BASE) 194 #define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) 195 #define INT_730_UART_MODEM_1 (15 + IH2_BASE) 196 #define INT_730_MCSI (16 + IH2_BASE) 197 #define INT_730_uWireTX (17 + IH2_BASE) 198 #define INT_730_uWireRX (18 + IH2_BASE) 199 #define INT_730_SMC_CD (19 + IH2_BASE) 200 #define INT_730_SMC_IREQ (20 + IH2_BASE) 201 #define INT_730_HDQ_1WIRE (21 + IH2_BASE) 202 #define INT_730_TIMER32K (22 + IH2_BASE) 203 #define INT_730_MMC_SDIO (23 + IH2_BASE) 204 #define INT_730_UPLD (24 + IH2_BASE) 205 #define INT_730_USB_HHC_1 (27 + IH2_BASE) 206 #define INT_730_USB_HHC_2 (28 + IH2_BASE) 207 #define INT_730_USB_GENI (29 + IH2_BASE) 208 #define INT_730_USB_OTG (30 + IH2_BASE) 209 #define INT_730_CAMERA_IF (31 + IH2_BASE) 210 #define INT_730_RNG (32 + IH2_BASE) 211 #define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) 212 #define INT_730_DBB_RF_EN (34 + IH2_BASE) 213 #define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) 214 #define INT_730_SHA1_MD5 (36 + IH2_BASE) 215 #define INT_730_SPI_100K_2 (37 + IH2_BASE) 216 #define INT_730_RNG_IDLE (38 + IH2_BASE) 217 #define INT_730_MPUIO (39 + IH2_BASE) 218 #define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) 219 #define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) 220 #define INT_730_LLPC_OE_RISING (42 + IH2_BASE) 221 #define INT_730_LLPC_VSYNC (43 + IH2_BASE) 222 #define INT_730_WAKE_UP_REQ (46 + IH2_BASE) 223 #define INT_730_DMA_CH6 (53 + IH2_BASE) 224 #define INT_730_DMA_CH7 (54 + IH2_BASE) 225 #define INT_730_DMA_CH8 (55 + IH2_BASE) 226 #define INT_730_DMA_CH9 (56 + IH2_BASE) 227 #define INT_730_DMA_CH10 (57 + IH2_BASE) 228 #define INT_730_DMA_CH11 (58 + IH2_BASE) 229 #define INT_730_DMA_CH12 (59 + IH2_BASE) 230 #define INT_730_DMA_CH13 (60 + IH2_BASE) 231 #define INT_730_DMA_CH14 (61 + IH2_BASE) 232 #define INT_730_DMA_CH15 (62 + IH2_BASE) 233 #define INT_730_NAND (63 + IH2_BASE) 234 235 #define INT_24XX_SYS_NIRQ 7 236 #define INT_24XX_SDMA_IRQ0 12 237 #define INT_24XX_SDMA_IRQ1 13 238 #define INT_24XX_SDMA_IRQ2 14 239 #define INT_24XX_SDMA_IRQ3 15 240 #define INT_24XX_CAM_IRQ 24 241 #define INT_24XX_DSS_IRQ 25 242 #define INT_24XX_GPIO_BANK1 29 243 #define INT_24XX_GPIO_BANK2 30 244 #define INT_24XX_GPIO_BANK3 31 245 #define INT_24XX_GPIO_BANK4 32 246 #define INT_24XX_GPTIMER1 37 247 #define INT_24XX_GPTIMER2 38 248 #define INT_24XX_GPTIMER3 39 249 #define INT_24XX_GPTIMER4 40 250 #define INT_24XX_GPTIMER5 41 251 #define INT_24XX_GPTIMER6 42 252 #define INT_24XX_GPTIMER7 43 253 #define INT_24XX_GPTIMER8 44 254 #define INT_24XX_GPTIMER9 45 255 #define INT_24XX_GPTIMER10 46 256 #define INT_24XX_GPTIMER11 47 257 #define INT_24XX_GPTIMER12 48 258 #define INT_24XX_MCBSP1_IRQ_TX 59 259 #define INT_24XX_MCBSP1_IRQ_RX 60 260 #define INT_24XX_MCBSP2_IRQ_TX 62 261 #define INT_24XX_MCBSP2_IRQ_RX 63 262 #define INT_24XX_UART1_IRQ 72 263 #define INT_24XX_UART2_IRQ 73 264 #define INT_24XX_UART3_IRQ 74 265 #define INT_24XX_MMC_IRQ 83 266 267 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and 268 * 16 MPUIO lines */ 269 #define OMAP_MAX_GPIO_LINES 192 270 #define IH_GPIO_BASE (128 + IH2_BASE) 271 #define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE) 272 #define IH_BOARD_BASE (16 + IH_MPUIO_BASE) 273 274 #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) 275 276 #ifndef __ASSEMBLY__ 277 extern void omap_init_irq(void); 278 #endif 279 280 /* 281 * The definition of NR_IRQS is in board-specific header file, which is 282 * included via hardware.h 283 */ 284 #include <asm/hardware.h> 285 286 #ifndef NR_IRQS 287 #define NR_IRQS IH_BOARD_BASE 288 #endif 289 290 #endif 291