1 /*
2 * Copyright (C) 2008 The Android Open Source Project
3 * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
4 *
5 * Not a Contribution, Apache license notifications and license are retained
6 * for attribution purposes only.
7 *
8 * Licensed under the Apache License, Version 2.0 (the "License");
9 * you may not use this file except in compliance with the License.
10 * You may obtain a copy of the License at
11 *
12 * http://www.apache.org/licenses/LICENSE-2.0
13 *
14 * Unless required by applicable law or agreed to in writing, software
15 * distributed under the License is distributed on an "AS IS" BASIS,
16 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
17 * See the License for the specific language governing permissions and
18 * limitations under the License.
19 */
20
21 #ifndef ANDROID_COPYBIT_INTERFACE_H
22 #define ANDROID_COPYBIT_INTERFACE_H
23
24 #include <hardware/hardware.h>
25
26 #include <stdint.h>
27 #include <sys/cdefs.h>
28 #include <sys/types.h>
29
30 __BEGIN_DECLS
31
32 /**
33 * The id of this module
34 */
35 #define COPYBIT_HARDWARE_MODULE_ID "copybit"
36
37 /**
38 * Name of the graphics device to open
39 */
40 #define COPYBIT_HARDWARE_COPYBIT0 "copybit0"
41
42 /* supported pixel-formats. these must be compatible with
43 * graphics/PixelFormat.java, ui/PixelFormat.h, pixelflinger/format.h
44 */
45 enum {
46 COPYBIT_FORMAT_RGBA_8888 = HAL_PIXEL_FORMAT_RGBA_8888,
47 COPYBIT_FORMAT_RGBX_8888 = HAL_PIXEL_FORMAT_RGBX_8888,
48 COPYBIT_FORMAT_RGB_888 = HAL_PIXEL_FORMAT_RGB_888,
49 COPYBIT_FORMAT_RGB_565 = HAL_PIXEL_FORMAT_RGB_565,
50 COPYBIT_FORMAT_BGRA_8888 = HAL_PIXEL_FORMAT_BGRA_8888,
51 COPYBIT_FORMAT_YCbCr_422_SP = 0x10,
52 COPYBIT_FORMAT_YCrCb_420_SP = 0x11,
53 };
54
55 /* name for copybit_set_parameter */
56 enum {
57 /* Default blit destination is offline buffer */
58 /* clients to set this to '1', if blitting to framebuffer */
59 /* and reset to '0', after calling blit/stretch */
60 COPYBIT_BLIT_TO_FRAMEBUFFER = 0,
61 /* rotation of the source image in degrees (0 to 359) */
62 COPYBIT_ROTATION_DEG = 1,
63 /* plane alpha value */
64 COPYBIT_PLANE_ALPHA = 2,
65 /* enable or disable dithering */
66 COPYBIT_DITHER = 3,
67 /* transformation applied (this is a superset of COPYBIT_ROTATION_DEG) */
68 COPYBIT_TRANSFORM = 4,
69 /* blurs the copied bitmap. The amount of blurring cannot be changed
70 * at this time. */
71 COPYBIT_BLUR = 5,
72 /* Blend mode */
73 COPYBIT_BLEND_MODE = 6,
74 /* FB width */
75 COPYBIT_FRAMEBUFFER_WIDTH = 7,
76 /* FB height */
77 COPYBIT_FRAMEBUFFER_HEIGHT = 8,
78 COPYBIT_FG_LAYER = 9,
79 };
80
81 /* values for copybit_set_parameter(COPYBIT_TRANSFORM) */
82 enum {
83 /* flip source image horizontally */
84 COPYBIT_TRANSFORM_FLIP_H = HAL_TRANSFORM_FLIP_H,
85 /* flip source image vertically */
86 COPYBIT_TRANSFORM_FLIP_V = HAL_TRANSFORM_FLIP_V,
87 /* rotate source image 90 degres */
88 COPYBIT_TRANSFORM_ROT_90 = HAL_TRANSFORM_ROT_90,
89 /* rotate source image 180 degres */
90 COPYBIT_TRANSFORM_ROT_180 = HAL_TRANSFORM_ROT_180,
91 /* rotate source image 270 degres */
92 COPYBIT_TRANSFORM_ROT_270 = HAL_TRANSFORM_ROT_270,
93 };
94
95 /* enable/disable value copybit_set_parameter */
96 enum {
97 COPYBIT_DISABLE = 0,
98 COPYBIT_ENABLE = 1
99 };
100
101 /*
102 * copybit blending values. same as HWC blending values
103 */
104 enum {
105 /* no blending */
106 COPYBIT_BLENDING_NONE = 0x0100,
107
108 /* ONE / ONE_MINUS_SRC_ALPHA */
109 COPYBIT_BLENDING_PREMULT = 0x0105,
110
111 /* SRC_ALPHA / ONE_MINUS_SRC_ALPHA */
112 COPYBIT_BLENDING_COVERAGE = 0x0405
113 };
114
115 /* use get_static_info() to query static informations about the hardware */
116 enum {
117 /* Maximum amount of minification supported by the hardware*/
118 COPYBIT_MINIFICATION_LIMIT = 1,
119 /* Maximum amount of magnification supported by the hardware */
120 COPYBIT_MAGNIFICATION_LIMIT = 2,
121 /* Number of fractional bits support by the scaling engine */
122 COPYBIT_SCALING_FRAC_BITS = 3,
123 /* Supported rotation step in degres. */
124 COPYBIT_ROTATION_STEP_DEG = 4,
125 };
126
127 /* Image structure */
128 struct copybit_image_t {
129 /* width */
130 uint32_t w;
131 /* height */
132 uint32_t h;
133 /* format COPYBIT_FORMAT_xxx */
134 int32_t format;
135 /* base of buffer with image */
136 void *base;
137 /* handle to the image */
138 native_handle_t* handle;
139 /* number of pixels added for the stride */
140 uint32_t horiz_padding;
141 /* number of pixels added for the vertical stride */
142 uint32_t vert_padding;
143 };
144
145 /* Rectangle */
146 struct copybit_rect_t {
147 /* left */
148 int l;
149 /* top */
150 int t;
151 /* right */
152 int r;
153 /* bottom */
154 int b;
155 };
156
157 /* Region */
158 struct copybit_region_t {
159 int (*next)(struct copybit_region_t const *region, struct copybit_rect_t *rect);
160 };
161
162 /**
163 * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
164 * and the fields of this data structure must begin with hw_module_t
165 * followed by module specific information.
166 */
167 struct copybit_module_t {
168 struct hw_module_t common;
169 };
170
171 /**
172 * Every device data structure must begin with hw_device_t
173 * followed by module specific public methods and attributes.
174 */
175 struct copybit_device_t {
176 struct hw_device_t common;
177
178 /**
179 * Set a copybit parameter.
180 *
181 * @param dev from open
182 * @param name one for the COPYBIT_NAME_xxx
183 * @param value one of the COPYBIT_VALUE_xxx
184 *
185 * @return 0 if successful
186 */
187 int (*set_parameter)(struct copybit_device_t *dev, int name, int value);
188
189 /**
190 * Get a static copybit information.
191 *
192 * @param dev from open
193 * @param name one of the COPYBIT_STATIC_xxx
194 *
195 * @return value or -EINVAL if error
196 */
197 int (*get)(struct copybit_device_t *dev, int name);
198
199 /**
200 * Execute the bit blit copy operation
201 *
202 * @param dev from open
203 * @param dst is the destination image
204 * @param src is the source image
205 * @param region the clip region
206 *
207 * @return 0 if successful
208 */
209 int (*blit)(struct copybit_device_t *dev,
210 struct copybit_image_t const *dst,
211 struct copybit_image_t const *src,
212 struct copybit_region_t const *region);
213
214 /**
215 * Give acquire fence to copybit to be used in upcoming stretch
216 * call
217 *
218 * @param dev from open
219 * @param acquireFenceFd is the acquire fence
220 *
221 * @return 0 if successful
222 */
223 int (*set_sync)(struct copybit_device_t *dev,
224 int acquireFenceFd);
225
226 /**
227 * Execute the stretch bit blit copy operation
228 *
229 * @param dev from open
230 * @param dst is the destination image
231 * @param src is the source image
232 * @param dst_rect is the destination rectangle
233 * @param src_rect is the source rectangle
234 * @param region the clip region
235 *
236 * @return 0 if successful
237 */
238 int (*stretch)(struct copybit_device_t *dev,
239 struct copybit_image_t const *dst,
240 struct copybit_image_t const *src,
241 struct copybit_rect_t const *dst_rect,
242 struct copybit_rect_t const *src_rect,
243 struct copybit_region_t const *region);
244
245 /**
246 * Execute the completion of the copybit draw operation.
247 *
248 * @param dev from open
249 *
250 * @return 0 if successful
251 */
252 int (*finish)(struct copybit_device_t *dev);
253
254 /**
255 * Trigger the copybit draw operation(async).
256 *
257 * @param dev from open
258 *
259 * @param fd - gets the fencefd
260 *
261 * @return 0 if successful
262 */
263 int (*flush_get_fence)(struct copybit_device_t *dev, int* fd);
264
265 /* Clears the buffer
266 */
267 int (*clear)(struct copybit_device_t *dev, struct copybit_image_t const *buf,
268 struct copybit_rect_t *rect);
269 };
270
271
272 /** convenience API for opening and closing a device */
273
copybit_open(const struct hw_module_t * module,struct copybit_device_t ** device)274 static inline int copybit_open(const struct hw_module_t* module,
275 struct copybit_device_t** device) {
276 return module->methods->open(module,
277 COPYBIT_HARDWARE_COPYBIT0, (struct hw_device_t**)device);
278 }
279
copybit_close(struct copybit_device_t * device)280 static inline int copybit_close(struct copybit_device_t* device) {
281 return device->common.close(&device->common);
282 }
283
284
285 __END_DECLS
286
287 #endif // ANDROID_COPYBIT_INTERFACE_H
288