1# -*-Makefile-*- for GNU make on Amiga 2# 3# NOTE: If you have no `make' program at all to process this makefile, run 4# `build.sh' instead. 5# 6# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 7# 2005, 2006 Free Software Foundation, Inc. 8# This file is part of GNU Make. 9# 10# GNU Make is free software; you can redistribute it and/or modify it under the 11# terms of the GNU General Public License as published by the Free Software 12# Foundation; either version 2, or (at your option) any later version. 13# 14# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY 15# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR 16# A PARTICULAR PURPOSE. See the GNU General Public License for more details. 17# 18# You should have received a copy of the GNU General Public License along with 19# GNU Make; see the file COPYING. If not, write to the Free Software 20# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 21 22# 23# Makefile for GNU Make 24# 25 26CC = sc 27RM = delete 28 29CFLAGS = 30CPPFLAGS = 31LDFLAGS = 32 33# Define these for your system as follows: 34# -DNO_ARCHIVES To disable `ar' archive support. 35# -DNO_FLOAT To avoid using floating-point numbers. 36# -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2. 37# Some compilers apparently accept this 38# without complaint but produce losing code, 39# so beware. 40# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline. 41# See also `config.h'. 42defines = 43 44# Which flavor of remote job execution support to use. 45# The code is found in `remote-$(REMOTE).c'. 46REMOTE = stub 47 48# If you are using the GNU C library, or have the GNU getopt functions in 49# your C library, you can comment these out. 50GETOPT = getopt.o getopt1.o 51GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h 52 53# If you are using the GNU C library, or have the GNU glob functions in 54# your C library, you can comment this out. GNU make uses special hooks 55# into the glob functions to be more efficient (by using make's directory 56# cache for globbing), so you must use the GNU functions even if your 57# system's C library has the 1003.2 glob functions already. Also, the glob 58# functions in the AIX and HPUX C libraries are said to be buggy. 59GLOB = glob/glob.lib 60 61# If your system doesn't have alloca, or the one provided is bad, define this. 62ALLOCA = alloca.o 63ALLOCA_SRC = $(srcdir)alloca.c 64 65# If your system needs extra libraries loaded in, define them here. 66# System V probably need -lPW for alloca. HP-UX 7.0's alloca in 67# libPW.a is broken on HP9000s300 and HP9000s400 machines. Use 68# alloca.c instead on those machines. 69LOADLIBES = 70 71# Any extra object files your system needs. 72extras = amiga.o 73 74# Common prefix for machine-independent installed files. 75prefix = 76# Common prefix for machine-dependent installed files. 77exec_prefix = 78 79# Directory to install `make' in. 80bindir = sc:c 81# Directory to find libraries in for `-lXXX'. 82libdir = lib: 83# Directory to search by default for included makefiles. 84includedir = include: 85# Directory to install the Info files in. 86infodir = doc: 87# Directory to install the man page in. 88mandir = t: 89# Number to put on the man page filename. 90manext = 1 91# Prefix to put on installed `make' binary file name. 92binprefix = 93# Prefix to put on installed `make' man page file name. 94manprefix = $(binprefix) 95 96# Whether or not make needs to be installed setgid. 97# The value should be either `true' or `false'. 98# On many systems, the getloadavg function (used to implement the `-l' 99# switch) will not work unless make is installed setgid kmem. 100install_setgid = false 101# Install make setgid to this group so it can read /dev/kmem. 102group = sys 103 104# Program to install `make'. 105INSTALL_PROGRAM = copy 106# Program to install the man page. 107INSTALL_DATA = copy 108# Generic install program. 109INSTALL = copy 110 111# Program to format Texinfo source into Info files. 112MAKEINFO = makeinfo 113# Program to format Texinfo source into DVI files. 114TEXI2DVI = texi2dvi 115 116# Programs to make tags files. 117ETAGS = etags -w 118CTAGS = ctags -w 119 120objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o \ 121 rule.o implicit.o default.o variable.o expand.o function.o \ 122 vpath.o version.o ar.o arscan.o signame.o strcache.o hash.o \ 123 remote-$(REMOTE).o $(GETOPT) $(ALLOCA) $(extras) 124srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c \ 125 $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c \ 126 $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c \ 127 $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c \ 128 $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c \ 129 $(srcdir)vpath.c $(srcdir)version.c $(srcdir)hash.c \ 130 $(srcdir)remote-$(REMOTE).c \ 131 $(srcdir)ar.c $(srcdir)arscan.c $(srcdir)strcache.c \ 132 $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC) \ 133 $(srcdir)commands.h $(srcdir)dep.h $(srcdir)filedep.h \ 134 $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h \ 135 $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in 136 137 138.SUFFIXES: 139.SUFFIXES: .o .c .h .ps .dvi .info .texinfo 140 141all: make 142info: make.info 143dvi: make.dvi 144# Some makes apparently use .PHONY as the default goal if it is before `all'. 145.PHONY: all check info dvi 146 147make.info: make.texinfo 148 $(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info 149 150make.dvi: make.texinfo 151 $(TEXI2DVI) $(srcdir)make.texinfo 152 153make.ps: make.dvi 154 dvi2ps make.dvi > make.ps 155 156make: $(objs) $(GLOB) 157 $(CC) Link $(LDFLAGS) $(objs) Lib $(GLOB) $(LOADLIBES) To make.new 158 -delete make 159 rename make.new make 160 161TMPFILE = t:Make$$ 162 163$(GLOB): 164 cd glob @@\ 165 $(MAKE) -$(MAKEFLAGS) -f Makefile 166 167# -I. is needed to find config.h in the build directory. 168OUTPUT_OPTION = 169.c.o: 170 $(CC) $(defines) IDir "" IDir glob \ 171 $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION) 172 173# For some losing Unix makes. 174SHELL = /bin/sh 175#@SET_MAKE@ 176 177glob/libglob.a: FORCE config.h 178 cd glob; $(MAKE) libglob.a 179FORCE: 180 181tagsrcs = $(srcs) $(srcdir)remote-*.c 182 183.PHONY: install installdirs 184install: installdirs \ 185 $(bindir)$(binprefix)make $(infodir)make.info \ 186 $(mandir)$(manprefix)make.$(manext) 187 188installdirs: 189 $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir) 190 191$(bindir)$(binprefix)make: make 192 $(INSTALL_PROGRAM) make $@.new 193 @if $(install_setgid); then \ 194 if chgrp $(group) $@.new && chmod g+s $@.new; then \ 195 echo "chgrp $(group) $@.new && chmod g+s $@.new"; \ 196 else \ 197 echo "$@ needs to be owned by group $(group) and setgid;"; \ 198 echo "otherwise the \`-l' option will probably not work."; \ 199 echo "You may need special privileges to install $@."; \ 200 fi; \ 201 else true; fi 202# Some systems can't deal with renaming onto a running binary. 203 -$(RM) $@.old 204 -mv $@ $@.old 205 mv $@.new $@ 206 207$(infodir)make.info: make.info 208 if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \ 209 for file in $${dir}/make.info*; do \ 210 name="`basename $$file`"; \ 211 $(INSTALL_DATA) $$file \ 212 `echo $@ | sed "s,make.info\$$,$$name,"`; \ 213 done 214# Run install-info only if it exists. 215# Use `if' instead of just prepending `-' to the 216# line so we notice real errors from install-info. 217# We use `$(SHELL) -c' because some shells do not 218# fail gracefully when there is an unknown command. 219 if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ 220 if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \ 221 install-info --infodir=$(infodir) $$dir/make.info; \ 222 else true; fi 223 224$(mandir)$(manprefix)make.$(manext): make.man 225 $(INSTALL_DATA) $(srcdir)make.man $@ 226 227 228loadavg: loadavg.c config.h 229 $(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \ 230 loadavg.c $(LOADLIBES) -o $@ 231# We copy getloadavg.c into a different file rather than compiling it 232# directly because some compilers clobber getloadavg.o in the process. 233loadavg.c: getloadavg.c 234 ln $(srcdir)getloadavg.c loadavg.c || \ 235 cp $(srcdir)getloadavg.c loadavg.c 236check-loadavg: loadavg 237 @echo The system uptime program believes the load average to be: 238 -uptime 239 @echo The GNU load average checking code believes: 240 ./loadavg 241check: check-loadavg 242 243 244.PHONY: clean realclean distclean mostlyclean 245clean: glob-clean 246 -$(RM) make loadavg "#?.o" core make.dvi 247 248distclean: clean glob-realclean 249 -$(RM) Makefile config.h config.status build.sh 250 -$(RM) config.log config.cache 251 -$(RM) TAGS tags 252 -$(RM) make.?? make.??s make.log make.toc make.*aux 253 -$(RM) loadavg.c 254 255realclean: distclean 256 -$(RM) make.info* 257mostlyclean: clean 258 259.PHONY: glob-clean glob-realclean 260glob-clean glob-realclean: 261 cd glob @@\ 262 $(MAKE) $@ 263 264# This tells versions [3.59,3.63) of GNU make not to export all variables. 265.NOEXPORT: 266 267# The automatically generated dependencies below may omit config.h 268# because it is included with ``#include <config.h>'' rather than 269# ``#include "config.h"''. So we add the explicit dependency to make sure. 270$(objs): config.h 271 272# Automatically generated dependencies will be put at the end of the file. 273 274# Automatically generated dependencies. 275commands.o: commands.c make.h dep.h filedef.h variable.h job.h \ 276 commands.h 277job.o: job.c make.h job.h filedef.h commands.h variable.h 278dir.o: dir.c make.h 279file.o: file.c make.h dep.h filedef.h job.h commands.h variable.h 280misc.o: misc.c make.h dep.h 281main.o: main.c make.h dep.h filedef.h variable.h job.h commands.h \ 282 getopt.h 283read.o: read.c make.h dep.h filedef.h job.h commands.h variable.h \ 284 glob/glob.h 285remake.o: remake.c make.h filedef.h job.h commands.h dep.h 286rule.o: rule.c make.h dep.h filedef.h job.h commands.h variable.h \ 287 rule.h 288implicit.o: implicit.c make.h rule.h dep.h filedef.h 289default.o: default.c make.h rule.h dep.h filedef.h job.h commands.h \ 290 variable.h 291variable.o: variable.c make.h dep.h filedef.h job.h commands.h \ 292 variable.h 293expand.o: expand.c make.h filedef.h job.h commands.h variable.h 294function.o: function.c make.h filedef.h variable.h dep.h job.h \ 295 commands.h amiga.h 296vpath.o: vpath.c make.h filedef.h variable.h 297strcache.o: strcache.c make.h hash.h 298version.o: version.c 299ar.o: ar.c make.h filedef.h dep.h 300arscan.o: arscan.c make.h 301signame.o: signame.c signame.h 302remote-stub.o: remote-stub.c make.h filedef.h job.h commands.h 303getopt.o: getopt.c 304getopt1.o : getopt1.c getopt.h 305getloadavg.o: getloadavg.c 306amiga.o: amiga.c make.h variable.h amiga.h 307