1 /* ssl/ssl3.h */ 2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) 3 * All rights reserved. 4 * 5 * This package is an SSL implementation written 6 * by Eric Young (eay@cryptsoft.com). 7 * The implementation was written so as to conform with Netscapes SSL. 8 * 9 * This library is free for commercial and non-commercial use as long as 10 * the following conditions are aheared to. The following conditions 11 * apply to all code found in this distribution, be it the RC4, RSA, 12 * lhash, DES, etc., code; not just the SSL code. The SSL documentation 13 * included with this distribution is covered by the same copyright terms 14 * except that the holder is Tim Hudson (tjh@cryptsoft.com). 15 * 16 * Copyright remains Eric Young's, and as such any Copyright notices in 17 * the code are not to be removed. 18 * If this package is used in a product, Eric Young should be given attribution 19 * as the author of the parts of the library used. 20 * This can be in the form of a textual message at program startup or 21 * in documentation (online or textual) provided with the package. 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions 25 * are met: 26 * 1. Redistributions of source code must retain the copyright 27 * notice, this list of conditions and the following disclaimer. 28 * 2. Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in the 30 * documentation and/or other materials provided with the distribution. 31 * 3. All advertising materials mentioning features or use of this software 32 * must display the following acknowledgement: 33 * "This product includes cryptographic software written by 34 * Eric Young (eay@cryptsoft.com)" 35 * The word 'cryptographic' can be left out if the rouines from the library 36 * being used are not cryptographic related :-). 37 * 4. If you include any Windows specific code (or a derivative thereof) from 38 * the apps directory (application code) you must include an acknowledgement: 39 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" 40 * 41 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND 42 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 43 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 44 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 45 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 46 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 47 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 49 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 50 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 51 * SUCH DAMAGE. 52 * 53 * The licence and distribution terms for any publically available version or 54 * derivative of this code cannot be changed. i.e. this code cannot simply be 55 * copied and put under another distribution licence 56 * [including the GNU Public Licence.] 57 */ 58 /* ==================================================================== 59 * Copyright (c) 1998-2002 The OpenSSL Project. All rights reserved. 60 * 61 * Redistribution and use in source and binary forms, with or without 62 * modification, are permitted provided that the following conditions 63 * are met: 64 * 65 * 1. Redistributions of source code must retain the above copyright 66 * notice, this list of conditions and the following disclaimer. 67 * 68 * 2. Redistributions in binary form must reproduce the above copyright 69 * notice, this list of conditions and the following disclaimer in 70 * the documentation and/or other materials provided with the 71 * distribution. 72 * 73 * 3. All advertising materials mentioning features or use of this 74 * software must display the following acknowledgment: 75 * "This product includes software developed by the OpenSSL Project 76 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" 77 * 78 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to 79 * endorse or promote products derived from this software without 80 * prior written permission. For written permission, please contact 81 * openssl-core@openssl.org. 82 * 83 * 5. Products derived from this software may not be called "OpenSSL" 84 * nor may "OpenSSL" appear in their names without prior written 85 * permission of the OpenSSL Project. 86 * 87 * 6. Redistributions of any form whatsoever must retain the following 88 * acknowledgment: 89 * "This product includes software developed by the OpenSSL Project 90 * for use in the OpenSSL Toolkit (http://www.openssl.org/)" 91 * 92 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY 93 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 94 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 95 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR 96 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 97 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 98 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 99 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 101 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 102 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 103 * OF THE POSSIBILITY OF SUCH DAMAGE. 104 * ==================================================================== 105 * 106 * This product includes cryptographic software written by Eric Young 107 * (eay@cryptsoft.com). This product includes software written by Tim 108 * Hudson (tjh@cryptsoft.com). 109 * 110 */ 111 /* ==================================================================== 112 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. 113 * ECC cipher suite support in OpenSSL originally developed by 114 * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. 115 */ 116 117 #ifndef HEADER_SSL3_H 118 #define HEADER_SSL3_H 119 120 #ifndef OPENSSL_NO_COMP 121 #include <openssl/comp.h> 122 #endif 123 #include <openssl/buffer.h> 124 #include <openssl/evp.h> 125 #include <openssl/ssl.h> 126 127 #ifdef __cplusplus 128 extern "C" { 129 #endif 130 131 /* Signalling cipher suite value from RFC 5746 132 * (TLS_EMPTY_RENEGOTIATION_INFO_SCSV) */ 133 #define SSL3_CK_SCSV 0x030000FF 134 135 /* Signalling cipher suite value from draft-ietf-tls-downgrade-scsv-00 136 * (TLS_FALLBACK_SCSV) */ 137 #define SSL3_CK_FALLBACK_SCSV 0x03005600 138 139 #define SSL3_CK_RSA_NULL_MD5 0x03000001 140 #define SSL3_CK_RSA_NULL_SHA 0x03000002 141 #define SSL3_CK_RSA_RC4_40_MD5 0x03000003 142 #define SSL3_CK_RSA_RC4_128_MD5 0x03000004 143 #define SSL3_CK_RSA_RC4_128_SHA 0x03000005 144 #define SSL3_CK_RSA_RC2_40_MD5 0x03000006 145 #define SSL3_CK_RSA_IDEA_128_SHA 0x03000007 146 #define SSL3_CK_RSA_DES_40_CBC_SHA 0x03000008 147 #define SSL3_CK_RSA_DES_64_CBC_SHA 0x03000009 148 #define SSL3_CK_RSA_DES_192_CBC3_SHA 0x0300000A 149 150 #define SSL3_CK_DH_DSS_DES_40_CBC_SHA 0x0300000B 151 #define SSL3_CK_DH_DSS_DES_64_CBC_SHA 0x0300000C 152 #define SSL3_CK_DH_DSS_DES_192_CBC3_SHA 0x0300000D 153 #define SSL3_CK_DH_RSA_DES_40_CBC_SHA 0x0300000E 154 #define SSL3_CK_DH_RSA_DES_64_CBC_SHA 0x0300000F 155 #define SSL3_CK_DH_RSA_DES_192_CBC3_SHA 0x03000010 156 157 #define SSL3_CK_EDH_DSS_DES_40_CBC_SHA 0x03000011 158 #define SSL3_CK_EDH_DSS_DES_64_CBC_SHA 0x03000012 159 #define SSL3_CK_EDH_DSS_DES_192_CBC3_SHA 0x03000013 160 #define SSL3_CK_EDH_RSA_DES_40_CBC_SHA 0x03000014 161 #define SSL3_CK_EDH_RSA_DES_64_CBC_SHA 0x03000015 162 #define SSL3_CK_EDH_RSA_DES_192_CBC3_SHA 0x03000016 163 164 #define SSL3_CK_ADH_RC4_40_MD5 0x03000017 165 #define SSL3_CK_ADH_RC4_128_MD5 0x03000018 166 #define SSL3_CK_ADH_DES_40_CBC_SHA 0x03000019 167 #define SSL3_CK_ADH_DES_64_CBC_SHA 0x0300001A 168 #define SSL3_CK_ADH_DES_192_CBC_SHA 0x0300001B 169 170 #if 0 171 #define SSL3_CK_FZA_DMS_NULL_SHA 0x0300001C 172 #define SSL3_CK_FZA_DMS_FZA_SHA 0x0300001D 173 #if 0 /* Because it clashes with KRB5, is never used any more, and is safe 174 to remove according to David Hopwood <david.hopwood@zetnet.co.uk> 175 of the ietf-tls list */ 176 #define SSL3_CK_FZA_DMS_RC4_SHA 0x0300001E 177 #endif 178 #endif 179 180 /* VRS Additional Kerberos5 entries 181 */ 182 #define SSL3_CK_KRB5_DES_64_CBC_SHA 0x0300001E 183 #define SSL3_CK_KRB5_DES_192_CBC3_SHA 0x0300001F 184 #define SSL3_CK_KRB5_RC4_128_SHA 0x03000020 185 #define SSL3_CK_KRB5_IDEA_128_CBC_SHA 0x03000021 186 #define SSL3_CK_KRB5_DES_64_CBC_MD5 0x03000022 187 #define SSL3_CK_KRB5_DES_192_CBC3_MD5 0x03000023 188 #define SSL3_CK_KRB5_RC4_128_MD5 0x03000024 189 #define SSL3_CK_KRB5_IDEA_128_CBC_MD5 0x03000025 190 191 #define SSL3_CK_KRB5_DES_40_CBC_SHA 0x03000026 192 #define SSL3_CK_KRB5_RC2_40_CBC_SHA 0x03000027 193 #define SSL3_CK_KRB5_RC4_40_SHA 0x03000028 194 #define SSL3_CK_KRB5_DES_40_CBC_MD5 0x03000029 195 #define SSL3_CK_KRB5_RC2_40_CBC_MD5 0x0300002A 196 #define SSL3_CK_KRB5_RC4_40_MD5 0x0300002B 197 198 #define SSL3_TXT_RSA_NULL_MD5 "NULL-MD5" 199 #define SSL3_TXT_RSA_NULL_SHA "NULL-SHA" 200 #define SSL3_TXT_RSA_RC4_40_MD5 "EXP-RC4-MD5" 201 #define SSL3_TXT_RSA_RC4_128_MD5 "RC4-MD5" 202 #define SSL3_TXT_RSA_RC4_128_SHA "RC4-SHA" 203 #define SSL3_TXT_RSA_RC2_40_MD5 "EXP-RC2-CBC-MD5" 204 #define SSL3_TXT_RSA_IDEA_128_SHA "IDEA-CBC-SHA" 205 #define SSL3_TXT_RSA_DES_40_CBC_SHA "EXP-DES-CBC-SHA" 206 #define SSL3_TXT_RSA_DES_64_CBC_SHA "DES-CBC-SHA" 207 #define SSL3_TXT_RSA_DES_192_CBC3_SHA "DES-CBC3-SHA" 208 209 #define SSL3_TXT_DH_DSS_DES_40_CBC_SHA "EXP-DH-DSS-DES-CBC-SHA" 210 #define SSL3_TXT_DH_DSS_DES_64_CBC_SHA "DH-DSS-DES-CBC-SHA" 211 #define SSL3_TXT_DH_DSS_DES_192_CBC3_SHA "DH-DSS-DES-CBC3-SHA" 212 #define SSL3_TXT_DH_RSA_DES_40_CBC_SHA "EXP-DH-RSA-DES-CBC-SHA" 213 #define SSL3_TXT_DH_RSA_DES_64_CBC_SHA "DH-RSA-DES-CBC-SHA" 214 #define SSL3_TXT_DH_RSA_DES_192_CBC3_SHA "DH-RSA-DES-CBC3-SHA" 215 216 #define SSL3_TXT_EDH_DSS_DES_40_CBC_SHA "EXP-EDH-DSS-DES-CBC-SHA" 217 #define SSL3_TXT_EDH_DSS_DES_64_CBC_SHA "EDH-DSS-DES-CBC-SHA" 218 #define SSL3_TXT_EDH_DSS_DES_192_CBC3_SHA "EDH-DSS-DES-CBC3-SHA" 219 #define SSL3_TXT_EDH_RSA_DES_40_CBC_SHA "EXP-EDH-RSA-DES-CBC-SHA" 220 #define SSL3_TXT_EDH_RSA_DES_64_CBC_SHA "EDH-RSA-DES-CBC-SHA" 221 #define SSL3_TXT_EDH_RSA_DES_192_CBC3_SHA "EDH-RSA-DES-CBC3-SHA" 222 223 #define SSL3_TXT_ADH_RC4_40_MD5 "EXP-ADH-RC4-MD5" 224 #define SSL3_TXT_ADH_RC4_128_MD5 "ADH-RC4-MD5" 225 #define SSL3_TXT_ADH_DES_40_CBC_SHA "EXP-ADH-DES-CBC-SHA" 226 #define SSL3_TXT_ADH_DES_64_CBC_SHA "ADH-DES-CBC-SHA" 227 #define SSL3_TXT_ADH_DES_192_CBC_SHA "ADH-DES-CBC3-SHA" 228 229 #if 0 230 #define SSL3_TXT_FZA_DMS_NULL_SHA "FZA-NULL-SHA" 231 #define SSL3_TXT_FZA_DMS_FZA_SHA "FZA-FZA-CBC-SHA" 232 #define SSL3_TXT_FZA_DMS_RC4_SHA "FZA-RC4-SHA" 233 #endif 234 235 #define SSL3_TXT_KRB5_DES_64_CBC_SHA "KRB5-DES-CBC-SHA" 236 #define SSL3_TXT_KRB5_DES_192_CBC3_SHA "KRB5-DES-CBC3-SHA" 237 #define SSL3_TXT_KRB5_RC4_128_SHA "KRB5-RC4-SHA" 238 #define SSL3_TXT_KRB5_IDEA_128_CBC_SHA "KRB5-IDEA-CBC-SHA" 239 #define SSL3_TXT_KRB5_DES_64_CBC_MD5 "KRB5-DES-CBC-MD5" 240 #define SSL3_TXT_KRB5_DES_192_CBC3_MD5 "KRB5-DES-CBC3-MD5" 241 #define SSL3_TXT_KRB5_RC4_128_MD5 "KRB5-RC4-MD5" 242 #define SSL3_TXT_KRB5_IDEA_128_CBC_MD5 "KRB5-IDEA-CBC-MD5" 243 244 #define SSL3_TXT_KRB5_DES_40_CBC_SHA "EXP-KRB5-DES-CBC-SHA" 245 #define SSL3_TXT_KRB5_RC2_40_CBC_SHA "EXP-KRB5-RC2-CBC-SHA" 246 #define SSL3_TXT_KRB5_RC4_40_SHA "EXP-KRB5-RC4-SHA" 247 #define SSL3_TXT_KRB5_DES_40_CBC_MD5 "EXP-KRB5-DES-CBC-MD5" 248 #define SSL3_TXT_KRB5_RC2_40_CBC_MD5 "EXP-KRB5-RC2-CBC-MD5" 249 #define SSL3_TXT_KRB5_RC4_40_MD5 "EXP-KRB5-RC4-MD5" 250 251 #define SSL3_SSL_SESSION_ID_LENGTH 32 252 #define SSL3_MAX_SSL_SESSION_ID_LENGTH 32 253 254 #define SSL3_MASTER_SECRET_SIZE 48 255 #define SSL3_RANDOM_SIZE 32 256 #define SSL3_SESSION_ID_SIZE 32 257 #define SSL3_RT_HEADER_LENGTH 5 258 259 #ifndef SSL3_ALIGN_PAYLOAD 260 /* Some will argue that this increases memory footprint, but it's 261 * not actually true. Point is that malloc has to return at least 262 * 64-bit aligned pointers, meaning that allocating 5 bytes wastes 263 * 3 bytes in either case. Suggested pre-gaping simply moves these 264 * wasted bytes from the end of allocated region to its front, 265 * but makes data payload aligned, which improves performance:-) */ 266 # define SSL3_ALIGN_PAYLOAD 8 267 #else 268 # if (SSL3_ALIGN_PAYLOAD&(SSL3_ALIGN_PAYLOAD-1))!=0 269 # error "insane SSL3_ALIGN_PAYLOAD" 270 # undef SSL3_ALIGN_PAYLOAD 271 # endif 272 #endif 273 274 /* This is the maximum MAC (digest) size used by the SSL library. 275 * Currently maximum of 20 is used by SHA1, but we reserve for 276 * future extension for 512-bit hashes. 277 */ 278 279 #define SSL3_RT_MAX_MD_SIZE 64 280 281 /* Maximum block size used in all ciphersuites. Currently 16 for AES. 282 */ 283 284 #define SSL_RT_MAX_CIPHER_BLOCK_SIZE 16 285 286 #define SSL3_RT_MAX_EXTRA (16384) 287 288 /* Maximum plaintext length: defined by SSL/TLS standards */ 289 #define SSL3_RT_MAX_PLAIN_LENGTH 16384 290 /* Maximum compression overhead: defined by SSL/TLS standards */ 291 #define SSL3_RT_MAX_COMPRESSED_OVERHEAD 1024 292 293 /* The standards give a maximum encryption overhead of 1024 bytes. 294 * In practice the value is lower than this. The overhead is the maximum 295 * number of padding bytes (256) plus the mac size. 296 */ 297 #define SSL3_RT_MAX_ENCRYPTED_OVERHEAD (256 + SSL3_RT_MAX_MD_SIZE) 298 299 /* OpenSSL currently only uses a padding length of at most one block so 300 * the send overhead is smaller. 301 */ 302 303 #define SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD \ 304 (SSL_RT_MAX_CIPHER_BLOCK_SIZE + SSL3_RT_MAX_MD_SIZE) 305 306 /* If compression isn't used don't include the compression overhead */ 307 308 #ifdef OPENSSL_NO_COMP 309 #define SSL3_RT_MAX_COMPRESSED_LENGTH SSL3_RT_MAX_PLAIN_LENGTH 310 #else 311 #define SSL3_RT_MAX_COMPRESSED_LENGTH \ 312 (SSL3_RT_MAX_PLAIN_LENGTH+SSL3_RT_MAX_COMPRESSED_OVERHEAD) 313 #endif 314 #define SSL3_RT_MAX_ENCRYPTED_LENGTH \ 315 (SSL3_RT_MAX_ENCRYPTED_OVERHEAD+SSL3_RT_MAX_COMPRESSED_LENGTH) 316 #define SSL3_RT_MAX_PACKET_SIZE \ 317 (SSL3_RT_MAX_ENCRYPTED_LENGTH+SSL3_RT_HEADER_LENGTH) 318 319 #define SSL3_MD_CLIENT_FINISHED_CONST "\x43\x4C\x4E\x54" 320 #define SSL3_MD_SERVER_FINISHED_CONST "\x53\x52\x56\x52" 321 322 #define SSL3_VERSION 0x0300 323 #define SSL3_VERSION_MAJOR 0x03 324 #define SSL3_VERSION_MINOR 0x00 325 326 #define SSL3_RT_CHANGE_CIPHER_SPEC 20 327 #define SSL3_RT_ALERT 21 328 #define SSL3_RT_HANDSHAKE 22 329 #define SSL3_RT_APPLICATION_DATA 23 330 #define TLS1_RT_HEARTBEAT 24 331 332 #define SSL3_AL_WARNING 1 333 #define SSL3_AL_FATAL 2 334 335 #define SSL3_AD_CLOSE_NOTIFY 0 336 #define SSL3_AD_UNEXPECTED_MESSAGE 10 /* fatal */ 337 #define SSL3_AD_BAD_RECORD_MAC 20 /* fatal */ 338 #define SSL3_AD_DECOMPRESSION_FAILURE 30 /* fatal */ 339 #define SSL3_AD_HANDSHAKE_FAILURE 40 /* fatal */ 340 #define SSL3_AD_NO_CERTIFICATE 41 341 #define SSL3_AD_BAD_CERTIFICATE 42 342 #define SSL3_AD_UNSUPPORTED_CERTIFICATE 43 343 #define SSL3_AD_CERTIFICATE_REVOKED 44 344 #define SSL3_AD_CERTIFICATE_EXPIRED 45 345 #define SSL3_AD_CERTIFICATE_UNKNOWN 46 346 #define SSL3_AD_ILLEGAL_PARAMETER 47 /* fatal */ 347 348 #define TLS1_HB_REQUEST 1 349 #define TLS1_HB_RESPONSE 2 350 351 #ifndef OPENSSL_NO_SSL_INTERN 352 353 typedef struct ssl3_record_st 354 { 355 /*r */ int type; /* type of record */ 356 /*rw*/ unsigned int length; /* How many bytes available */ 357 /*r */ unsigned int off; /* read/write offset into 'buf' */ 358 /*rw*/ unsigned char *data; /* pointer to the record data */ 359 /*rw*/ unsigned char *input; /* where the decode bytes are */ 360 /*r */ unsigned char *comp; /* only used with decompression - malloc()ed */ 361 /*r */ unsigned long epoch; /* epoch number, needed by DTLS1 */ 362 /*r */ unsigned char seq_num[8]; /* sequence number, needed by DTLS1 */ 363 } SSL3_RECORD; 364 365 typedef struct ssl3_buffer_st 366 { 367 unsigned char *buf; /* at least SSL3_RT_MAX_PACKET_SIZE bytes, 368 * see ssl3_setup_buffers() */ 369 size_t len; /* buffer size */ 370 int offset; /* where to 'copy from' */ 371 int left; /* how many bytes left */ 372 } SSL3_BUFFER; 373 374 #endif 375 376 #define SSL3_CT_RSA_SIGN 1 377 #define SSL3_CT_DSS_SIGN 2 378 #define SSL3_CT_RSA_FIXED_DH 3 379 #define SSL3_CT_DSS_FIXED_DH 4 380 #define SSL3_CT_RSA_EPHEMERAL_DH 5 381 #define SSL3_CT_DSS_EPHEMERAL_DH 6 382 #define SSL3_CT_FORTEZZA_DMS 20 383 /* SSL3_CT_NUMBER is used to size arrays and it must be large 384 * enough to contain all of the cert types defined either for 385 * SSLv3 and TLSv1. 386 */ 387 #define SSL3_CT_NUMBER 9 388 389 390 #define SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS 0x0001 391 #define SSL3_FLAGS_DELAY_CLIENT_FINISHED 0x0002 392 #define SSL3_FLAGS_POP_BUFFER 0x0004 393 #define TLS1_FLAGS_TLS_PADDING_BUG 0x0008 394 #define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010 395 #define TLS1_FLAGS_KEEP_HANDSHAKE 0x0020 396 #define SSL3_FLAGS_CCS_OK 0x0080 397 398 /* SSL3_FLAGS_SGC_RESTART_DONE is set when we 399 * restart a handshake because of MS SGC and so prevents us 400 * from restarting the handshake in a loop. It's reset on a 401 * renegotiation, so effectively limits the client to one restart 402 * per negotiation. This limits the possibility of a DDoS 403 * attack where the client handshakes in a loop using SGC to 404 * restart. Servers which permit renegotiation can still be 405 * effected, but we can't prevent that. 406 */ 407 #define SSL3_FLAGS_SGC_RESTART_DONE 0x0040 408 409 #ifndef OPENSSL_NO_SSL_INTERN 410 411 typedef struct ssl3_state_st 412 { 413 long flags; 414 int delay_buf_pop_ret; 415 416 unsigned char read_sequence[8]; 417 int read_mac_secret_size; 418 unsigned char read_mac_secret[EVP_MAX_MD_SIZE]; 419 unsigned char write_sequence[8]; 420 int write_mac_secret_size; 421 unsigned char write_mac_secret[EVP_MAX_MD_SIZE]; 422 423 unsigned char server_random[SSL3_RANDOM_SIZE]; 424 unsigned char client_random[SSL3_RANDOM_SIZE]; 425 426 /* flags for countermeasure against known-IV weakness */ 427 int need_record_splitting; 428 int record_split_done; 429 430 /* The value of 'extra' when the buffers were initialized */ 431 int init_extra; 432 433 SSL3_BUFFER rbuf; /* read IO goes into here */ 434 SSL3_BUFFER wbuf; /* write IO goes into here */ 435 436 SSL3_RECORD rrec; /* each decoded record goes in here */ 437 SSL3_RECORD wrec; /* goes out from here */ 438 439 /* storage for Alert/Handshake protocol data received but not 440 * yet processed by ssl3_read_bytes: */ 441 unsigned char alert_fragment[2]; 442 unsigned int alert_fragment_len; 443 unsigned char handshake_fragment[4]; 444 unsigned int handshake_fragment_len; 445 446 /* partial write - check the numbers match */ 447 unsigned int wnum; /* number of bytes sent so far */ 448 int wpend_tot; /* number bytes written */ 449 int wpend_type; 450 int wpend_ret; /* number of bytes submitted */ 451 const unsigned char *wpend_buf; 452 453 /* used during startup, digest all incoming/outgoing packets */ 454 BIO *handshake_buffer; 455 /* When set of handshake digests is determined, buffer is hashed 456 * and freed and MD_CTX-es for all required digests are stored in 457 * this array */ 458 EVP_MD_CTX **handshake_dgst; 459 /* this is set whenerver we see a change_cipher_spec message 460 * come in when we are not looking for one */ 461 int change_cipher_spec; 462 463 int warn_alert; 464 int fatal_alert; 465 /* we allow one fatal and one warning alert to be outstanding, 466 * send close alert via the warning alert */ 467 int alert_dispatch; 468 unsigned char send_alert[2]; 469 470 /* This flag is set when we should renegotiate ASAP, basically when 471 * there is no more data in the read or write buffers */ 472 int renegotiate; 473 int total_renegotiations; 474 int num_renegotiations; 475 476 int in_read_app_data; 477 478 /* Opaque PRF input as used for the current handshake. 479 * These fields are used only if TLSEXT_TYPE_opaque_prf_input is defined 480 * (otherwise, they are merely present to improve binary compatibility) */ 481 void *client_opaque_prf_input; 482 size_t client_opaque_prf_input_len; 483 void *server_opaque_prf_input; 484 size_t server_opaque_prf_input_len; 485 486 struct { 487 /* actually only needs to be 16+20 */ 488 unsigned char cert_verify_md[EVP_MAX_MD_SIZE*2]; 489 490 /* actually only need to be 16+20 for SSLv3 and 12 for TLS */ 491 unsigned char finish_md[EVP_MAX_MD_SIZE*2]; 492 int finish_md_len; 493 unsigned char peer_finish_md[EVP_MAX_MD_SIZE*2]; 494 int peer_finish_md_len; 495 496 unsigned long message_size; 497 int message_type; 498 499 /* used to hold the new cipher we are going to use */ 500 const SSL_CIPHER *new_cipher; 501 #ifndef OPENSSL_NO_DH 502 DH *dh; 503 #endif 504 505 #ifndef OPENSSL_NO_ECDH 506 EC_KEY *ecdh; /* holds short lived ECDH key */ 507 #endif 508 509 /* used when SSL_ST_FLUSH_DATA is entered */ 510 int next_state; 511 512 int reuse_message; 513 514 /* used for certificate requests */ 515 int cert_req; 516 int ctype_num; 517 char ctype[SSL3_CT_NUMBER]; 518 STACK_OF(X509_NAME) *ca_names; 519 520 int use_rsa_tmp; 521 522 int key_block_length; 523 unsigned char *key_block; 524 525 const EVP_CIPHER *new_sym_enc; 526 const EVP_MD *new_hash; 527 int new_mac_pkey_type; 528 int new_mac_secret_size; 529 #ifndef OPENSSL_NO_COMP 530 const SSL_COMP *new_compression; 531 #else 532 char *new_compression; 533 #endif 534 int cert_request; 535 } tmp; 536 537 /* Connection binding to prevent renegotiation attacks */ 538 unsigned char previous_client_finished[EVP_MAX_MD_SIZE]; 539 unsigned char previous_client_finished_len; 540 unsigned char previous_server_finished[EVP_MAX_MD_SIZE]; 541 unsigned char previous_server_finished_len; 542 int send_connection_binding; /* TODOEKR */ 543 544 #ifndef OPENSSL_NO_NEXTPROTONEG 545 /* Set if we saw the Next Protocol Negotiation extension from our peer. */ 546 int next_proto_neg_seen; 547 #endif 548 549 #ifndef OPENSSL_NO_TLSEXT 550 #ifndef OPENSSL_NO_EC 551 /* This is set to true if we believe that this is a version of Safari 552 * running on OS X 10.6 or newer. We wish to know this because Safari 553 * on 10.8 .. 10.8.3 has broken ECDHE-ECDSA support. */ 554 char is_probably_safari; 555 #endif /* !OPENSSL_NO_EC */ 556 #endif /* !OPENSSL_NO_TLSEXT */ 557 558 /* In a client, this means that the server supported Channel ID and that 559 * a Channel ID was sent. In a server it means that we echoed support 560 * for Channel IDs and that tlsext_channel_id will be valid after the 561 * handshake. */ 562 char tlsext_channel_id_valid; 563 /* tlsext_channel_id_new means that the updated Channel ID extension 564 * was negotiated. This is a temporary hack in the code to support both 565 * forms of Channel ID extension while we transition to the new format, 566 * which fixed a security issue. */ 567 char tlsext_channel_id_new; 568 /* For a server: 569 * If |tlsext_channel_id_valid| is true, then this contains the 570 * verified Channel ID from the client: a P256 point, (x,y), where 571 * each are big-endian values. */ 572 unsigned char tlsext_channel_id[64]; 573 574 /* ALPN information 575 * (we are in the process of transitioning from NPN to ALPN.) */ 576 577 /* In a server these point to the selected ALPN protocol after the 578 * ClientHello has been processed. In a client these contain the 579 * protocol that the server selected once the ServerHello has been 580 * processed. */ 581 unsigned char *alpn_selected; 582 unsigned alpn_selected_len; 583 584 /* These point to the digest function to use for signatures made with 585 * each type of public key. A NULL value indicates that the default 586 * digest should be used, which is SHA1 as of TLS 1.2. 587 * 588 * (These should be in the tmp member, but we have to put them here to 589 * ensure binary compatibility with earlier OpenSSL 1.0.* releases.) */ 590 const EVP_MD *digest_rsa; 591 const EVP_MD *digest_dsa; 592 const EVP_MD *digest_ecdsa; 593 } SSL3_STATE; 594 595 #endif 596 597 /* SSLv3 */ 598 /*client */ 599 /* extra state */ 600 #define SSL3_ST_CW_FLUSH (0x100|SSL_ST_CONNECT) 601 #define SSL3_ST_CUTTHROUGH_COMPLETE (0x101|SSL_ST_CONNECT) 602 #ifndef OPENSSL_NO_SCTP 603 #define DTLS1_SCTP_ST_CW_WRITE_SOCK (0x310|SSL_ST_CONNECT) 604 #define DTLS1_SCTP_ST_CR_READ_SOCK (0x320|SSL_ST_CONNECT) 605 #endif 606 /* write to server */ 607 #define SSL3_ST_CW_CLNT_HELLO_A (0x110|SSL_ST_CONNECT) 608 #define SSL3_ST_CW_CLNT_HELLO_B (0x111|SSL_ST_CONNECT) 609 /* read from server */ 610 #define SSL3_ST_CR_SRVR_HELLO_A (0x120|SSL_ST_CONNECT) 611 #define SSL3_ST_CR_SRVR_HELLO_B (0x121|SSL_ST_CONNECT) 612 #define DTLS1_ST_CR_HELLO_VERIFY_REQUEST_A (0x126|SSL_ST_CONNECT) 613 #define DTLS1_ST_CR_HELLO_VERIFY_REQUEST_B (0x127|SSL_ST_CONNECT) 614 #define SSL3_ST_CR_CERT_A (0x130|SSL_ST_CONNECT) 615 #define SSL3_ST_CR_CERT_B (0x131|SSL_ST_CONNECT) 616 #define SSL3_ST_CR_KEY_EXCH_A (0x140|SSL_ST_CONNECT) 617 #define SSL3_ST_CR_KEY_EXCH_B (0x141|SSL_ST_CONNECT) 618 #define SSL3_ST_CR_CERT_REQ_A (0x150|SSL_ST_CONNECT) 619 #define SSL3_ST_CR_CERT_REQ_B (0x151|SSL_ST_CONNECT) 620 #define SSL3_ST_CR_SRVR_DONE_A (0x160|SSL_ST_CONNECT) 621 #define SSL3_ST_CR_SRVR_DONE_B (0x161|SSL_ST_CONNECT) 622 /* write to server */ 623 #define SSL3_ST_CW_CERT_A (0x170|SSL_ST_CONNECT) 624 #define SSL3_ST_CW_CERT_B (0x171|SSL_ST_CONNECT) 625 #define SSL3_ST_CW_CERT_C (0x172|SSL_ST_CONNECT) 626 #define SSL3_ST_CW_CERT_D (0x173|SSL_ST_CONNECT) 627 #define SSL3_ST_CW_KEY_EXCH_A (0x180|SSL_ST_CONNECT) 628 #define SSL3_ST_CW_KEY_EXCH_B (0x181|SSL_ST_CONNECT) 629 #define SSL3_ST_CW_CERT_VRFY_A (0x190|SSL_ST_CONNECT) 630 #define SSL3_ST_CW_CERT_VRFY_B (0x191|SSL_ST_CONNECT) 631 #define SSL3_ST_CW_CHANGE_A (0x1A0|SSL_ST_CONNECT) 632 #define SSL3_ST_CW_CHANGE_B (0x1A1|SSL_ST_CONNECT) 633 #ifndef OPENSSL_NO_NEXTPROTONEG 634 #define SSL3_ST_CW_NEXT_PROTO_A (0x200|SSL_ST_CONNECT) 635 #define SSL3_ST_CW_NEXT_PROTO_B (0x201|SSL_ST_CONNECT) 636 #endif 637 #define SSL3_ST_CW_CHANNEL_ID_A (0x210|SSL_ST_CONNECT) 638 #define SSL3_ST_CW_CHANNEL_ID_B (0x211|SSL_ST_CONNECT) 639 #define SSL3_ST_CW_FINISHED_A (0x1B0|SSL_ST_CONNECT) 640 #define SSL3_ST_CW_FINISHED_B (0x1B1|SSL_ST_CONNECT) 641 /* read from server */ 642 #define SSL3_ST_CR_CHANGE_A (0x1C0|SSL_ST_CONNECT) 643 #define SSL3_ST_CR_CHANGE_B (0x1C1|SSL_ST_CONNECT) 644 #define SSL3_ST_CR_FINISHED_A (0x1D0|SSL_ST_CONNECT) 645 #define SSL3_ST_CR_FINISHED_B (0x1D1|SSL_ST_CONNECT) 646 #define SSL3_ST_CR_SESSION_TICKET_A (0x1E0|SSL_ST_CONNECT) 647 #define SSL3_ST_CR_SESSION_TICKET_B (0x1E1|SSL_ST_CONNECT) 648 #define SSL3_ST_CR_CERT_STATUS_A (0x1F0|SSL_ST_CONNECT) 649 #define SSL3_ST_CR_CERT_STATUS_B (0x1F1|SSL_ST_CONNECT) 650 651 /* server */ 652 /* extra state */ 653 #define SSL3_ST_SW_FLUSH (0x100|SSL_ST_ACCEPT) 654 #ifndef OPENSSL_NO_SCTP 655 #define DTLS1_SCTP_ST_SW_WRITE_SOCK (0x310|SSL_ST_ACCEPT) 656 #define DTLS1_SCTP_ST_SR_READ_SOCK (0x320|SSL_ST_ACCEPT) 657 #endif 658 /* read from client */ 659 /* Do not change the number values, they do matter */ 660 #define SSL3_ST_SR_CLNT_HELLO_A (0x110|SSL_ST_ACCEPT) 661 #define SSL3_ST_SR_CLNT_HELLO_B (0x111|SSL_ST_ACCEPT) 662 #define SSL3_ST_SR_CLNT_HELLO_C (0x112|SSL_ST_ACCEPT) 663 /* write to client */ 664 #define DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A (0x113|SSL_ST_ACCEPT) 665 #define DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B (0x114|SSL_ST_ACCEPT) 666 #define SSL3_ST_SW_HELLO_REQ_A (0x120|SSL_ST_ACCEPT) 667 #define SSL3_ST_SW_HELLO_REQ_B (0x121|SSL_ST_ACCEPT) 668 #define SSL3_ST_SW_HELLO_REQ_C (0x122|SSL_ST_ACCEPT) 669 #define SSL3_ST_SW_SRVR_HELLO_A (0x130|SSL_ST_ACCEPT) 670 #define SSL3_ST_SW_SRVR_HELLO_B (0x131|SSL_ST_ACCEPT) 671 #define SSL3_ST_SW_CERT_A (0x140|SSL_ST_ACCEPT) 672 #define SSL3_ST_SW_CERT_B (0x141|SSL_ST_ACCEPT) 673 #define SSL3_ST_SW_KEY_EXCH_A (0x150|SSL_ST_ACCEPT) 674 #define SSL3_ST_SW_KEY_EXCH_B (0x151|SSL_ST_ACCEPT) 675 #define SSL3_ST_SW_CERT_REQ_A (0x160|SSL_ST_ACCEPT) 676 #define SSL3_ST_SW_CERT_REQ_B (0x161|SSL_ST_ACCEPT) 677 #define SSL3_ST_SW_SRVR_DONE_A (0x170|SSL_ST_ACCEPT) 678 #define SSL3_ST_SW_SRVR_DONE_B (0x171|SSL_ST_ACCEPT) 679 /* read from client */ 680 #define SSL3_ST_SR_CERT_A (0x180|SSL_ST_ACCEPT) 681 #define SSL3_ST_SR_CERT_B (0x181|SSL_ST_ACCEPT) 682 #define SSL3_ST_SR_KEY_EXCH_A (0x190|SSL_ST_ACCEPT) 683 #define SSL3_ST_SR_KEY_EXCH_B (0x191|SSL_ST_ACCEPT) 684 #define SSL3_ST_SR_CERT_VRFY_A (0x1A0|SSL_ST_ACCEPT) 685 #define SSL3_ST_SR_CERT_VRFY_B (0x1A1|SSL_ST_ACCEPT) 686 #define SSL3_ST_SR_CHANGE_A (0x1B0|SSL_ST_ACCEPT) 687 #define SSL3_ST_SR_CHANGE_B (0x1B1|SSL_ST_ACCEPT) 688 #ifndef OPENSSL_NO_NEXTPROTONEG 689 #define SSL3_ST_SR_NEXT_PROTO_A (0x210|SSL_ST_ACCEPT) 690 #define SSL3_ST_SR_NEXT_PROTO_B (0x211|SSL_ST_ACCEPT) 691 #endif 692 #define SSL3_ST_SR_POST_CLIENT_CERT (0x1BF|SSL_ST_ACCEPT) 693 #define SSL3_ST_SR_CHANNEL_ID_A (0x220|SSL_ST_ACCEPT) 694 #define SSL3_ST_SR_CHANNEL_ID_B (0x221|SSL_ST_ACCEPT) 695 #define SSL3_ST_SR_FINISHED_A (0x1C0|SSL_ST_ACCEPT) 696 #define SSL3_ST_SR_FINISHED_B (0x1C1|SSL_ST_ACCEPT) 697 /* write to client */ 698 #define SSL3_ST_SW_CHANGE_A (0x1D0|SSL_ST_ACCEPT) 699 #define SSL3_ST_SW_CHANGE_B (0x1D1|SSL_ST_ACCEPT) 700 #define SSL3_ST_SW_FINISHED_A (0x1E0|SSL_ST_ACCEPT) 701 #define SSL3_ST_SW_FINISHED_B (0x1E1|SSL_ST_ACCEPT) 702 #define SSL3_ST_SW_SESSION_TICKET_A (0x1F0|SSL_ST_ACCEPT) 703 #define SSL3_ST_SW_SESSION_TICKET_B (0x1F1|SSL_ST_ACCEPT) 704 #define SSL3_ST_SW_CERT_STATUS_A (0x200|SSL_ST_ACCEPT) 705 #define SSL3_ST_SW_CERT_STATUS_B (0x201|SSL_ST_ACCEPT) 706 707 #define SSL3_MT_HELLO_REQUEST 0 708 #define SSL3_MT_CLIENT_HELLO 1 709 #define SSL3_MT_SERVER_HELLO 2 710 #define SSL3_MT_NEWSESSION_TICKET 4 711 #define SSL3_MT_CERTIFICATE 11 712 #define SSL3_MT_SERVER_KEY_EXCHANGE 12 713 #define SSL3_MT_CERTIFICATE_REQUEST 13 714 #define SSL3_MT_SERVER_DONE 14 715 #define SSL3_MT_CERTIFICATE_VERIFY 15 716 #define SSL3_MT_CLIENT_KEY_EXCHANGE 16 717 #define SSL3_MT_FINISHED 20 718 #define SSL3_MT_CERTIFICATE_STATUS 22 719 #ifndef OPENSSL_NO_NEXTPROTONEG 720 #define SSL3_MT_NEXT_PROTO 67 721 #endif 722 #define SSL3_MT_ENCRYPTED_EXTENSIONS 203 723 #define DTLS1_MT_HELLO_VERIFY_REQUEST 3 724 725 726 #define SSL3_MT_CCS 1 727 728 /* These are used when changing over to a new cipher */ 729 #define SSL3_CC_READ 0x01 730 #define SSL3_CC_WRITE 0x02 731 #define SSL3_CC_CLIENT 0x10 732 #define SSL3_CC_SERVER 0x20 733 #define SSL3_CHANGE_CIPHER_CLIENT_WRITE (SSL3_CC_CLIENT|SSL3_CC_WRITE) 734 #define SSL3_CHANGE_CIPHER_SERVER_READ (SSL3_CC_SERVER|SSL3_CC_READ) 735 #define SSL3_CHANGE_CIPHER_CLIENT_READ (SSL3_CC_CLIENT|SSL3_CC_READ) 736 #define SSL3_CHANGE_CIPHER_SERVER_WRITE (SSL3_CC_SERVER|SSL3_CC_WRITE) 737 738 #ifdef __cplusplus 739 } 740 #endif 741 #endif 742