1 /* 2 * Stack-less Just-In-Time compiler 3 * 4 * Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without modification, are 7 * permitted provided that the following conditions are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright notice, this list of 10 * conditions and the following disclaimer. 11 * 12 * 2. Redistributions in binary form must reproduce the above copyright notice, this list 13 * of conditions and the following disclaimer in the documentation and/or other materials 14 * provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY 17 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 19 * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 21 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 22 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 24 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #ifndef _SLJIT_CONFIG_INTERNAL_H_ 28 #define _SLJIT_CONFIG_INTERNAL_H_ 29 30 /* 31 SLJIT defines the following architecture dependent types and macros: 32 33 Types: 34 sljit_sb, sljit_ub : signed and unsigned 8 bit byte 35 sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type 36 sljit_si, sljit_ui : signed and unsigned 32 bit integer type 37 sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer 38 sljit_p : unsgined pointer value (usually the same as sljit_uw, but 39 some 64 bit ABIs may use 32 bit pointers) 40 sljit_s : single precision floating point value 41 sljit_d : double precision floating point value 42 43 Macros for feature detection (boolean): 44 SLJIT_32BIT_ARCHITECTURE : 32 bit architecture 45 SLJIT_64BIT_ARCHITECTURE : 64 bit architecture 46 SLJIT_LITTLE_ENDIAN : little endian architecture 47 SLJIT_BIG_ENDIAN : big endian architecture 48 SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!) 49 SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information 50 51 Constants: 52 SLJIT_NUMBER_OF_REGISTERS : number of available registers 53 SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers 54 SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers 55 SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers 56 SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers 57 SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers 58 SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index 59 SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing 60 a double precision floating point array by index 61 SLJIT_SINGLE_SHIFT : the shift required to apply when accessing 62 a single precision floating point array by index 63 SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address 64 65 Other macros: 66 SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT 67 SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper) 68 */ 69 70 #if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 71 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 72 || (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 73 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 74 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 75 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 76 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 77 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 78 || (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 79 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 80 || (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 81 || (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 82 || (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 83 || (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)) 84 #error "An architecture must be selected" 85 #endif 86 87 /* Sanity check. */ 88 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 89 + (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 90 + (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 91 + (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 92 + (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 93 + (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 94 + (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 95 + (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 96 + (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 97 + (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 98 + (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 99 + (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 100 + (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 101 + (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2 102 #error "Multiple architectures are selected" 103 #endif 104 105 /* Auto select option (requires compiler support) */ 106 #if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) 107 108 #ifndef _WIN32 109 110 #if defined(__i386__) || defined(__i386) 111 #define SLJIT_CONFIG_X86_32 1 112 #elif defined(__x86_64__) 113 #define SLJIT_CONFIG_X86_64 1 114 #elif defined(__arm__) || defined(__ARM__) 115 #ifdef __thumb2__ 116 #define SLJIT_CONFIG_ARM_THUMB2 1 117 #elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__) 118 #define SLJIT_CONFIG_ARM_V7 1 119 #else 120 #define SLJIT_CONFIG_ARM_V5 1 121 #endif 122 #elif defined (__aarch64__) 123 #define SLJIT_CONFIG_ARM_64 1 124 #elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__)) 125 #define SLJIT_CONFIG_PPC_64 1 126 #elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER) 127 #define SLJIT_CONFIG_PPC_32 1 128 #elif defined(__mips__) && !defined(_LP64) 129 #define SLJIT_CONFIG_MIPS_32 1 130 #elif defined(__mips64) 131 #define SLJIT_CONFIG_MIPS_64 1 132 #elif defined(__sparc__) || defined(__sparc) 133 #define SLJIT_CONFIG_SPARC_32 1 134 #elif defined(__tilegx__) 135 #define SLJIT_CONFIG_TILEGX 1 136 #else 137 /* Unsupported architecture */ 138 #define SLJIT_CONFIG_UNSUPPORTED 1 139 #endif 140 141 #else /* !_WIN32 */ 142 143 #if defined(_M_X64) || defined(__x86_64__) 144 #define SLJIT_CONFIG_X86_64 1 145 #elif defined(_ARM_) 146 #define SLJIT_CONFIG_ARM_V5 1 147 #else 148 #define SLJIT_CONFIG_X86_32 1 149 #endif 150 151 #endif /* !WIN32 */ 152 #endif /* SLJIT_CONFIG_AUTO */ 153 154 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 155 #undef SLJIT_EXECUTABLE_ALLOCATOR 156 #endif 157 158 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 159 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 160 #define SLJIT_CONFIG_ARM_32 1 161 #endif 162 163 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 164 #define SLJIT_CONFIG_X86 1 165 #elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 166 #define SLJIT_CONFIG_ARM 1 167 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 168 #define SLJIT_CONFIG_PPC 1 169 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 170 #define SLJIT_CONFIG_MIPS 1 171 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64) 172 #define SLJIT_CONFIG_SPARC 1 173 #endif 174 175 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 176 #define SLJIT_NUMBER_OF_REGISTERS 10 177 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 178 #elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 179 #ifndef _WIN64 180 #define SLJIT_NUMBER_OF_REGISTERS 12 181 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 6 182 #else 183 #define SLJIT_NUMBER_OF_REGISTERS 12 184 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 185 #endif /* _WIN64 */ 186 #elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) 187 #define SLJIT_NUMBER_OF_REGISTERS 11 188 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 189 #elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 190 #define SLJIT_NUMBER_OF_REGISTERS 11 191 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 192 #elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 193 #define SLJIT_NUMBER_OF_REGISTERS 23 194 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 10 195 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 196 #define SLJIT_NUMBER_OF_REGISTERS 22 197 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 17 198 #elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) 199 #define SLJIT_NUMBER_OF_REGISTERS 17 200 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 201 #elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC) 202 #define SLJIT_NUMBER_OF_REGISTERS 18 203 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 14 204 #elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 205 #define SLJIT_NUMBER_OF_REGISTERS 0 206 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 0 207 #endif 208 209 #define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \ 210 (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS) 211 212 #define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6 213 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64) 214 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1 215 #else 216 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0 217 #endif 218 219 #define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \ 220 (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS) 221 222 #if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED) 223 224 /* These libraries are needed for the macros below. */ 225 #include <stdlib.h> 226 #include <string.h> 227 228 #endif /* STD_MACROS_DEFINED */ 229 230 /* General macros: 231 Note: SLJIT is designed to be independent from them as possible. 232 233 In release mode (SLJIT_DEBUG is not defined) only the following macros are needed: 234 */ 235 236 #ifndef SLJIT_MALLOC 237 #define SLJIT_MALLOC(size) malloc(size) 238 #endif 239 240 #ifndef SLJIT_FREE 241 #define SLJIT_FREE(ptr) free(ptr) 242 #endif 243 244 #ifndef SLJIT_MEMMOVE 245 #define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len) 246 #endif 247 248 #ifndef SLJIT_ZEROMEM 249 #define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len) 250 #endif 251 252 #if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) 253 254 #if defined(__GNUC__) && (__GNUC__ >= 3) 255 #define SLJIT_LIKELY(x) __builtin_expect((x), 1) 256 #define SLJIT_UNLIKELY(x) __builtin_expect((x), 0) 257 #else 258 #define SLJIT_LIKELY(x) (x) 259 #define SLJIT_UNLIKELY(x) (x) 260 #endif 261 262 #endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */ 263 264 #ifndef SLJIT_INLINE 265 /* Inline functions. Some old compilers do not support them. */ 266 #if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510 267 #define SLJIT_INLINE 268 #else 269 #define SLJIT_INLINE __inline 270 #endif 271 #endif /* !SLJIT_INLINE */ 272 273 #ifndef SLJIT_CONST 274 /* Const variables. */ 275 #define SLJIT_CONST const 276 #endif 277 278 #ifndef SLJIT_UNUSED_ARG 279 /* Unused arguments. */ 280 #define SLJIT_UNUSED_ARG(arg) (void)arg 281 #endif 282 283 #if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) 284 /* Static ABI functions. For all-in-one programs. */ 285 286 #if defined(__GNUC__) 287 /* Disable unused warnings in gcc. */ 288 #define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused)) 289 #else 290 #define SLJIT_API_FUNC_ATTRIBUTE static 291 #endif 292 293 #else 294 #define SLJIT_API_FUNC_ATTRIBUTE 295 #endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */ 296 297 #ifndef SLJIT_CACHE_FLUSH 298 299 #if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) 300 301 /* Not required to implement on archs with unified caches. */ 302 #define SLJIT_CACHE_FLUSH(from, to) 303 304 #elif defined __APPLE__ 305 306 /* Supported by all macs since Mac OS 10.5. 307 However, it does not work on non-jailbroken iOS devices, 308 although the compilation is successful. */ 309 310 #define SLJIT_CACHE_FLUSH(from, to) \ 311 sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from)) 312 313 #elif defined __ANDROID__ 314 315 /* Android lacks __clear_cache; instead, cacheflush should be used. */ 316 317 #define SLJIT_CACHE_FLUSH(from, to) \ 318 cacheflush((long)(from), (long)(to), 0) 319 320 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 321 322 /* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */ 323 #define SLJIT_CACHE_FLUSH(from, to) \ 324 ppc_cache_flush((from), (to)) 325 326 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 327 328 /* The __clear_cache() implementation of GCC is a dummy function on Sparc. */ 329 #define SLJIT_CACHE_FLUSH(from, to) \ 330 sparc_cache_flush((from), (to)) 331 332 #else 333 334 /* Calls __ARM_NR_cacheflush on ARM-Linux. */ 335 #define SLJIT_CACHE_FLUSH(from, to) \ 336 __clear_cache((char*)(from), (char*)(to)) 337 338 #endif 339 340 #endif /* !SLJIT_CACHE_FLUSH */ 341 342 /* 8 bit byte type. */ 343 typedef unsigned char sljit_ub; 344 typedef signed char sljit_sb; 345 346 /* 16 bit half-word type. */ 347 typedef unsigned short int sljit_uh; 348 typedef signed short int sljit_sh; 349 350 /* 32 bit integer type. */ 351 typedef unsigned int sljit_ui; 352 typedef signed int sljit_si; 353 354 /* Machine word type. Can encapsulate a pointer. 355 32 bit for 32 bit machines. 356 64 bit for 64 bit machines. */ 357 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 358 /* Just to have something. */ 359 #define SLJIT_WORD_SHIFT 0 360 typedef unsigned long int sljit_uw; 361 typedef long int sljit_sw; 362 #elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 363 && !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 364 && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 365 && !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 366 && !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 367 #define SLJIT_32BIT_ARCHITECTURE 1 368 #define SLJIT_WORD_SHIFT 2 369 typedef unsigned int sljit_uw; 370 typedef int sljit_sw; 371 #else 372 #define SLJIT_64BIT_ARCHITECTURE 1 373 #define SLJIT_WORD_SHIFT 3 374 #ifdef _WIN32 375 typedef unsigned __int64 sljit_uw; 376 typedef __int64 sljit_sw; 377 #else 378 typedef unsigned long int sljit_uw; 379 typedef long int sljit_sw; 380 #endif 381 #endif 382 383 typedef sljit_uw sljit_p; 384 385 /* Floating point types. */ 386 typedef float sljit_s; 387 typedef double sljit_d; 388 389 /* Shift for pointer sized data. */ 390 #define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT 391 392 /* Shift for double precision sized data. */ 393 #define SLJIT_DOUBLE_SHIFT 3 394 #define SLJIT_SINGLE_SHIFT 2 395 396 #ifndef SLJIT_W 397 398 /* Defining long constants. */ 399 #if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE) 400 #define SLJIT_W(w) (w##ll) 401 #else 402 #define SLJIT_W(w) (w) 403 #endif 404 405 #endif /* !SLJIT_W */ 406 407 #ifndef SLJIT_CALL 408 409 /* ABI (Application Binary Interface) types. */ 410 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 411 412 #if defined(__GNUC__) && !defined(__APPLE__) 413 414 #define SLJIT_CALL __attribute__ ((fastcall)) 415 #define SLJIT_X86_32_FASTCALL 1 416 417 #elif defined(_MSC_VER) 418 419 #define SLJIT_CALL __fastcall 420 #define SLJIT_X86_32_FASTCALL 1 421 422 #elif defined(__BORLANDC__) 423 424 #define SLJIT_CALL __msfastcall 425 #define SLJIT_X86_32_FASTCALL 1 426 427 #else /* Unknown compiler. */ 428 429 /* The cdecl attribute is the default. */ 430 #define SLJIT_CALL 431 432 #endif 433 434 #else /* Non x86-32 architectures. */ 435 436 #define SLJIT_CALL 437 438 #endif /* SLJIT_CONFIG_X86_32 */ 439 440 #endif /* !SLJIT_CALL */ 441 442 #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) 443 444 /* These macros are useful for the applications. */ 445 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 446 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 447 448 #ifdef __LITTLE_ENDIAN__ 449 #define SLJIT_LITTLE_ENDIAN 1 450 #else 451 #define SLJIT_BIG_ENDIAN 1 452 #endif 453 454 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 455 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 456 457 #ifdef __MIPSEL__ 458 #define SLJIT_LITTLE_ENDIAN 1 459 #else 460 #define SLJIT_BIG_ENDIAN 1 461 #endif 462 463 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 464 465 #define SLJIT_BIG_ENDIAN 1 466 467 #else 468 #define SLJIT_LITTLE_ENDIAN 1 469 #endif 470 471 #endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */ 472 473 /* Sanity check. */ 474 #if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 475 #error "Exactly one endianness must be selected" 476 #endif 477 478 #if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 479 #error "Exactly one endianness must be selected" 480 #endif 481 482 #ifndef SLJIT_INDIRECT_CALL 483 #if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \ 484 || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX) 485 /* It seems certain ppc compilers use an indirect addressing for functions 486 which makes things complicated. */ 487 #define SLJIT_INDIRECT_CALL 1 488 #endif 489 #endif /* SLJIT_INDIRECT_CALL */ 490 491 #ifndef SLJIT_RETURN_ADDRESS_OFFSET 492 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 493 #define SLJIT_RETURN_ADDRESS_OFFSET 8 494 #else 495 #define SLJIT_RETURN_ADDRESS_OFFSET 0 496 #endif 497 #endif /* SLJIT_RETURN_ADDRESS_OFFSET */ 498 499 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 500 /* Auto detect SSE2 support using CPUID. 501 On 64 bit x86 cpus, sse2 must be present. */ 502 #define SLJIT_DETECT_SSE2 1 503 #endif 504 505 #ifndef SLJIT_UNALIGNED 506 507 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 508 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 509 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 510 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 511 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 512 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 513 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 514 #define SLJIT_UNALIGNED 1 515 #endif 516 517 #endif /* !SLJIT_UNALIGNED */ 518 519 #if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR) 520 SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size); 521 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr); 522 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void); 523 #define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size) 524 #define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr) 525 #endif 526 527 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) 528 #include <stdio.h> 529 #endif 530 531 #if (defined SLJIT_DEBUG && SLJIT_DEBUG) 532 533 #if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP) 534 535 /* SLJIT_HALT_PROCESS must halt the process. */ 536 #ifndef SLJIT_HALT_PROCESS 537 #include <stdlib.h> 538 539 #define SLJIT_HALT_PROCESS() \ 540 abort(); 541 #endif /* !SLJIT_HALT_PROCESS */ 542 543 #include <stdio.h> 544 545 #endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */ 546 547 /* Feel free to redefine these two macros. */ 548 #ifndef SLJIT_ASSERT 549 550 #define SLJIT_ASSERT(x) \ 551 do { \ 552 if (SLJIT_UNLIKELY(!(x))) { \ 553 printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \ 554 SLJIT_HALT_PROCESS(); \ 555 } \ 556 } while (0) 557 558 #endif /* !SLJIT_ASSERT */ 559 560 #ifndef SLJIT_ASSERT_STOP 561 562 #define SLJIT_ASSERT_STOP() \ 563 do { \ 564 printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \ 565 SLJIT_HALT_PROCESS(); \ 566 } while (0) 567 568 #endif /* !SLJIT_ASSERT_STOP */ 569 570 #else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 571 572 /* Forcing empty, but valid statements. */ 573 #undef SLJIT_ASSERT 574 #undef SLJIT_ASSERT_STOP 575 576 #define SLJIT_ASSERT(x) \ 577 do { } while (0) 578 #define SLJIT_ASSERT_STOP() \ 579 do { } while (0) 580 581 #endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 582 583 #ifndef SLJIT_COMPILE_ASSERT 584 585 /* Should be improved eventually. */ 586 #define SLJIT_COMPILE_ASSERT(x, description) \ 587 SLJIT_ASSERT(x) 588 589 #endif /* !SLJIT_COMPILE_ASSERT */ 590 591 #endif 592