• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1Friday April 10, 2015 guy@alum.mit.edu
2  Summary for 4.7.4 tcpdump release
3	RPKI to Router Protocol: Fix Segmentation Faults and other problems
4	RPKI to Router Protocol: print strings with fn_printn()
5	wb: fix some bounds checks
6
7Wednesday March 11, 2015 mcr@sandelman.ca
8  Summary for 4.7.3 tcpdump release
9	Capsicum fixes for FreeBSD 10
10
11Tuesday March 10, 2015 mcr@sandelman.ca
12  Summary for 4.7.2 tcpdump release
13	DCCP: update Packet Types with RFC4340/IANA names
14        fixes for CVE-2015-0261: IPv6 mobility header check issue
15        fixes for CVE-2015-2153, 2154, 2155: kday packets
16
17Friday Nov. 12, 2014 guy@alum.mit.edu
18  Summary for 4.7.0 tcpdump release
19        changes to hex printing of CDP packets
20	Fix PPI printing
21	Radius: update Packet Type Codes and Attribute Types with RFC/IANA names
22	Add a routine to print "text protocols", and add FTP/HTTP/SMTP/RTSP support.
23	improvements to telnet printer, even if not -v
24	omit length for bcp, print-tcp uses it
25	formatting fixes for a bunch of protocols
26	new bounds checks for a number of protocols
27	split netflow 1,6, and 6 dissector up.
28	added geneve dissector
29        CVE-2014-9140 PPP dissector fixed.
30
31Tuesday  Sep.  2, 2014 mcr@sandelman.ca
32  Summary for 4.6.2 tcpdump release
33	fix out-of-source-tree builds: find libpcap that is out of source
34	better configure check for libsmi
35
36Saturday Jul. 19, 2014 mcr@sandelman.ca
37  Summary for 4.6.1 tcpdump release
38	added FreeBSD capsicum
39	add a short option '#', same as long option '--number'
40
41Wednesday Jul. 2, 2014 mcr@sandelman.ca
42  Summary for 4.6.0 tcpdump release
43        all of tcpdump is now using the new "NDO" code base (Thanks Denis!)
44        nflog, mobile, forces, pptp, AODV, AHCP, IPv6, OSPFv4, RPL, DHCPv6 enhancements/fixes
45        M3UA decode added.
46        many new test cases: 82 in 4.5.1 to 133 in 4.6.0
47        many improvements to travis continuous integration system: OSX, and Coverity options
48        cleaned up some unnecessary header files
49        Added bittok2str().
50        a number of unaligned access faults fixed
51        -A flag does not consider CR to be printable anymore
52        fx.lebail took over coverity baby sitting
53        default snapshot size increased to 256K for accomodate USB captures
54        WARNING: this release contains a lot of very worthwhile code churn.
55
56Wednesday Jan. 15, 2014 guy@alum.mit.edu
57  Summary for 4.5.2 tcpdump release
58	Man page fix
59	Fix crashes on SPARC
60
61Monday Nov. 11, 2013 mcr@sandelman.ca
62  Summary for 4.5.1 tcpdump release
63	CREDITS file fixes
64
65Thursday Nov. 7, 2013  mcr@sandelman.ca and guy@alum.mit.edu.
66  Summary for 4.5.0 tcpdump release
67        some NFSv4 fixes for printing
68        fix printing of unknown TCP options, and tcp fast-open
69        fixes for syslog parser
70        some gcc-version-specific flag tuning
71        adopt MacOS deprecation workarounds for openssl
72        improvements to babel printing
73        add OpenFlow 1.0 (no SSL) and test cases
74        GeoNet printer.
75        added STBC Rx support
76        improvements to DHCPv6 decoder
77        clarify which autoconf is needed
78	Point users to the the-tcpdump-group repository on GitHub rather
79	    than the mcr repository
80	Add MSDP printer.
81	Fixed IPv6 check on Solaris and other OSes requiring extra
82	    networking libraries.
83	Add support for VXLAN (draft-mahalingam-dutt-dcops-vxlan-03),
84	    and add "vxlan" as an option for -T.
85	Add support for OTV (draft-hasmit-otv-04).
86        fixes for DLT_IEEE802_11_RADIO datalink types
87        added MPTCP decoder
88
89Saturday April 6, 2013 guy@alum.mit.edu.
90  Summary for 4.4.0 tcpdump release
91	RPKI-RTR (RFC6810) is now official (TCP Port 323)
92	Fix detection of OpenSSL libcrypto.
93	Add DNSSL (RFC6106) support.
94	Add "radius" as an option for -T.
95	Update Action codes for handle_action function according to
96	    802.11s amendment.
97	Decode DHCPv6 AFTR-Name option (RFC6334).
98	Updates for Babel.
99	Fix printing of infinite lifetime in ICMPv6.
100	Added support for SPB, SPBM Service Identifier, and Unicast
101	    Address sub-TLV in ISIS.
102	Decode RIPv2 authentication up to RFC4822.
103	Fix RIP Request/full table decoding issues.
104	On Linux systems with cap-ng.h, drop root privileges
105	    using Linux Capabilities.
106	Add support for reading multiple files.
107	Add MS NLB heartbeat printer.
108	Separate multiple nexthops in BGP.
109
110Wednesday  November 28, 2012 guy@alum.mit.edu.
111  Summary for 4.3.1 tcpdump release
112	Print "LLDP, length N" for LLDP packets even when not in verbose
113	    mode, so something is printed even if only the timestamp is
114	    present
115	Document "-T carp"
116	Print NTP poll interval correctly (it's an exponent, so print
117	    both its raw value and 2^value)
118	Document that "-e" is used to get MAC addresses
119	More clearly document that you need to escape or quote
120	    backslashes in filter expressions on the command line
121	Fix some "the the" in the man page
122	Use the right maximum path length
123	Don't treat 192_1_2, when passed to -i, as an interface number
124
125Friday  April 3, 2012.  mcr@sandelman.ca.
126  Summary for 4.3.0 tcpdump release
127        fixes for forces: SPARSE data (per RFC 5810)
128        some more test cases added
129        updates to documentation on -l, -U and -w flags.
130        Fix printing of BGP optional headers.
131        Tried to include DLT_PFSYNC support, failed due to headers required.
132        added TIPC support.
133        Fix LLDP Network Policy bit definitions.
134        fixes for IGMPv3's Max Response Time: it is in units of 0.1 second.
135        SIGUSR1 can be used rather than SIGINFO for stats
136        permit -n flag to affect print-ip for protocol numbers
137        ND_OPT_ADVINTERVAL is in milliseconds, not seconds
138        Teach PPPoE parser about RFC 4638
139
140
141Friday  December 9, 2011.  guy@alum.mit.edu.
142  Summary for 4.2.1 tcpdump release
143	Only build the Babel printer if IPv6 is enabled.
144	Support Babel on port 6696 as well as 6697.
145	Include ppi.h in release tarball.
146	Include all the test files in the release tarball, and don't
147	 "include" test files that no longer exist.
148	Don't assume we have <rpc/rpc.h> - check for it.
149	Support "-T carp" as a way of dissecting IP protocol 112 as CARP
150	 rather than VRRP.
151	Support Hilscher NetAnalyzer link-layer header format.
152	Constify some pointers and fix compiler warnings.
153	Get rid of never-true test.
154	Fix an unintended fall-through in a case statement in the ARP
155	 printer.
156	Fix several cases where sizeof(sizeof(XXX)) was used when just
157	 sizeof(XXX) was intended.
158	Make stricter sanity checks in the ES-IS printer.
159	Get rid of some GCCisms that caused builds to fai with compilers
160	 that don't support them.
161	Fix typo in man page.
162	Added length checks to Babel printer.
163
164Sunday  July 24, 2011.  mcr@sandelman.ca.
165  Summary for 4.2.+
166	merged 802.15.4 decoder from Dmitry Eremin-Solenikov <dbaryshkov
167	  at gmail dot com>
168        updates to forces for new port numbers
169        Use "-H", not "-h", for the 802.11s option. (-h always help)
170        Better ICMPv6 checksum handling.
171        add support for the RPKI/Router Protocol, per -ietf-sidr-rpki-rtr-12
172        get rid of uuencoded pcap test files, git can do binary.
173        sFlow changes for 64-bit counters.
174        fixes for PPI packet header handling and printing.
175        Add DCB Exchange protocol (DCBX) version 1.01.
176        Babel dissector, from Juliusz Chroboczek and Grégoire Henry.
177        improvements to radiotap for rate values > 127.
178        Many improvements to ForCES decode, including fix SCTP TML port
179        updated RPL type code to RPL-17 draft
180        Improve printout of DHCPv6 options.
181        added support and test case for QinQ (802.1q VLAN) packets
182        Handle DLT_IEEE802_15_4_NOFCS like DLT_IEEE802_15_4.
183        Build fixes for Sparc and other machines with alignment restrictions.
184        Merged changes from Debian package.
185        PGM: Add ACK decoding and add PGMCC DATA and FEEDBACK options.
186        Build fixes for OSX (Snow Leopard and others)
187        Add support for IEEE 802.15.4 packets
188
189Tue.    July 20, 2010.  guy@alum.mit.edu.
190  Summary for 4.1.2 tcpdump release
191	If -U is specified, flush the file after creating it, so it's
192	  not zero-length
193	Fix TCP flags output description, and some typoes, in the man
194	  page
195	Add a -h flag, and only attempt to recognize 802.11s mesh
196	  headers if it's set
197	When printing the link-layer type list, send *all* output to
198	  stderr
199	Include the CFLAGS setting when configure was run in the
200	  compiler flags
201
202Thu.	April 1, 2010.  guy@alum.mit.edu.
203  Summary for 4.1.1 tcpdump release
204	Fix build on systems with PF, such as FreeBSD and OpenBSD.
205	Don't blow up if a zero-length link-layer address is passed to
206	  linkaddr_string().
207
208Thu.	March 11, 2010.  ken@netfunctional.ca/guy@alum.mit.edu.
209  Summary for 4.1.0 tcpdump release
210	Fix printing of MAC addresses for VLAN frames with a length
211	  field
212	Add some additional bounds checks and use the EXTRACT_ macros
213	  more
214	Add a -b flag to print the AS number in BGP packets in ASDOT
215	  notation rather than ASPLAIN notation
216	Add ICMPv6 RFC 5006 support
217	Decode the access flags in NFS access requests
218	Handle the new DLT_ for memory-mapped USB captures on Linux
219	Make the default snapshot (-s) the maximum
220	Print name of device (when -L is used)
221	Support for OpenSolaris (and SXCE build 125 and later)
222	Print new TCP flags
223	Add support for RPL DIO
224	Add support for TCP User Timeout (UTO)
225	Add support for non-standard Ethertypes used by 3com PPPoE gear
226	Add support for 802.11n and 802.11s
227	Add support for Transparent Ethernet Bridge ethertype in GRE
228	Add 4 byte AS support for BGP printer
229	Add support for the MDT SAFI 66 BG printer
230	Add basic IPv6 support to print-olsr
231	Add USB printer
232	Add printer for ForCES
233	Handle frames with an FCS
234	Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames
235	Fix TCP sequence number printing
236	Report 802.2 packets as 802.2 instead of 802.3
237	Don't include -L/usr/lib in LDFLAGS
238	On x86_64 Linux, look in lib64 directory too
239	Lots of code clean ups
240	Autoconf clean ups
241	Update testcases to make output changes
242	Fix compiling with/out smi (--with{,out}-smi)
243	Fix compiling without IPv6 support (--disable-ipv6)
244
245Mon.    October 27, 2008.  ken@netfunctional.ca.  Summary for 4.0.0 tcpdump release
246        Add support for Bluetooth Sniffing
247        Add support for Realtek Remote Control Protocol (openrrcp.org.ru)
248        Add support for 802.11 AVS
249        Add support for SMB over TCP
250        Add support for 4 byte BGP AS printing
251        Add support for compiling on case-insensitive file systems
252        Add support for ikev2 printing
253        Update support for decoding AFS
254        Update DHCPv6 printer
255        Use newer libpcap API's (allows -B option on all platforms)
256        Add -I to turn on monitor mode
257        Bugfixes in lldp, lspping, dccp, ESP, NFS printers
258        Cleanup unused files and various cruft
259
260Mon.    September 10, 2007.  ken@xelerance.com.  Summary for 3.9.8 tcpdump release
261        Rework ARP printer
262        Rework OSPFv3 printer
263        Add support for Frame-Relay ARP
264        Decode DHCP Option 121 (RFC 3442 Classless Static Route)
265        Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121
266        TLV: Add support for Juniper .pcap extensions
267        Print EGP header in new-world-order style
268        Converted print-isakmp.c to NETDISSECT
269        Moved AF specific stuff into af.h
270        Test subsystem now table driven, and saves outputs and diffs to one place
271        Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
272         libpcap files on an OS other than where the file was generated
273
274
275Wed.	July 23, 2007.  mcr@xelerance.com.  Summary for 3.9.7 libpcap release
276
277    	NFS: Print unsigned values as such.
278	RX: parse safely.
279	BGP: fixes for IPv6-less builds.
280	801.1ag: use standard codepoint.
281	use /dev/bpf on systems with such a device.
282	802.11: print QoS data, avoid dissect of no-data frame, ignore padding.
283	smb: make sure that we haven't gone past the end of the captured data.
284	smb: squelch an uninitialized complaint from coverity.
285	NFS: from NetBSD; don't interpret the reply as a possible NFS reply
286		if it got MSG_DENIED.
287	BGP: don't print TLV values that didn't fit, from www.digit-labs.org.
288	revised INSTALL.txt about libpcap dependancy.
289
290Wed.	April 25, 2007. ken@xelerance.com.  Summary for 3.9.6 tcpdump release
291	Update man page to reflect changes to libpcap
292	Changes to both TCP and IP Printer Output
293	Fix a potential buffer overflow in the 802.11 printer
294	Print basic info about a few more Cisco LAN protocols.
295	mDNS cleanup
296	ICMP MPLS rework of the extension code
297	bugfix: use the correct codepoint for the OSPF simple text auth token
298	 entry, and use safeputs to print the password.
299	Add support in pflog for additional values
300	Add support for OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects
301	Add support for the Message-id NACK c-type.
302	Add support for 802.3ah loopback ctrl msg
303	Add support for Multiple-STP as per 802.1s
304	Add support for rapid-SPT as per 802.1w
305	Add support for CFM Link-trace msg, Link-trace-Reply msg,
306	 Sender-ID tlv, private tlv, port, interface status
307	Add support for unidirectional link detection as per
308	 http://www.ietf.org/internet-drafts/draft-foschiano-udld-02.txt
309	Add support for the olsr protocol as per RFC 3626 plus the LQ
310	 extensions from olsr.org
311	Add support for variable-length checksum in DCCP, as per section 9 of
312	 RFC 4340.
313	Add support for per-VLAN spanning tree and per-VLAN rapid spanning tree
314	Add support for Multiple-STP as per 802.1s
315	Add support for the cisco propriatry 'dynamic trunking protocol'
316	Add support for the cisco proprietary VTP protocol
317	Update dhcp6 options table as per IETF standardization activities
318
319
320Tue.	September 19, 2006. ken@xelerance.com. Summary for 3.9.5 tcpdump release
321
322	Fix compiling on AIX (, at end of ENUM)
323	Updated list of DNS RR typecodes
324	Use local Ethernet defs on WIN32
325	Add support for Frame-Relay ARP
326	Fixes for compiling under MSVC++
327	Add support for parsing Juniper .pcap files
328	Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
329	Rework the OSPFv3 printer
330	Fix printing for 4.4BSD/NetBSD NFS Filehandles
331	Add support for Cisco style NLPID encapsulation
332	Add cisco prop. eigrp related, extended communities
333	Add support for BGP signaled VPLS
334	Cleanup the bootp printer
335	Add support for PPP over Frame-Relay
336	Add some bounds checking to the IP options code, and clean up
337	 the options output a bit.
338	Add additional modp groups to ISAKMP printer
339	Add support for Address-Withdraw and Label-Withdraw Msgs
340	Add support for the BFD Discriminator TLV
341	Fixes for 64bit compiling
342	Add support for PIMv2 checksum verification
343	Add support for further dissection of the IPCP Compression Option
344	Add support for Cisco's proposed VQP protocol
345	Add basic support for keyed authentication TCP option
346	Lots of minor cosmetic changes to output printers
347
348
349Mon. 	September 19, 2005.  ken@xelerance.com. Summary for 3.9.4 tcpdump release
350	Decoder support for more Juniper link-layer types
351	Fix a potential buffer overflow (although it can't occur in
352		practice).
353	Fix the handling of unknown management frame types in the 802.11
354		printer.
355	Add FRF.16 support, fix various Frame Relay bugs.
356	Add support for RSVP integrity objects, update fast-reroute
357		object printer to latest spec.
358	Clean up documentation of vlan filter expression, document mpls
359		filter expression.
360	Document new pppoed and pppoes filter expressions.
361	Update diffserver-TE codepoints as per RFC 4124.
362	Spelling fixes in ICMPv6.
363	Don't require any fields other than flags to be present in IS-IS
364		restart signaling TLVs, and only print the system ID in
365		those TLVs as system IDs, not as node IDs.
366	Support for DCCP.
367
368Tue. 	July 5, 2005.  ken@xelerance.com. Summary for 3.9.3 tcpdump release
369
370	Option to chroot() when dropping privs
371	Fixes for compiling on nearly every platform,
372		including improved 64bit support
373	Many new testcases
374	Support for sending packets
375	Many compliation fixes on most platforms
376	Fixes for recent version of GCC to eliminate warnings
377	Improved Unicode support
378
379	Decoders & DLT Changes, Updates and New:
380		AES ESP support
381		Juniper ATM, FRF.15, FRF.16, PPPoE,
382			ML-FR, ML-PIC, ML-PPP, PL-PPP, LS-PIC
383			GGSN,ES,MONITOR,SERVICES
384		L2VPN
385		Axent Raptor/Symantec Firewall
386		TCP-MD5 (RFC 2385)
387		ESP-in-UDP (RFC 3948)
388		ATM OAM
389		LMP, LMP Service Discovery
390		IP over FC
391		IP over IEEE 1394
392		BACnet MS/TP
393		SS7
394		LDP over TCP
395		LACP, MARKER as per 802.3ad
396		PGM (RFC 3208)
397		LSP-PING
398		G.7041/Y.1303 Generic Framing Procedure
399		EIGRP-IP, EIGRP-IPX
400		ICMP6
401		Radio - via radiotap
402		DHCPv6
403		HDLC over PPP
404
405Tue.   March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release
406
407	No changes from 3.8.2. Version bumped only to maintain consistency
408	with libpcap 0.8.3.
409
410Mon.   March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release
411
412	Fixes for print-isakmp.c      CVE:    CAN-2004-0183, CAN-2004-0184
413	  		     http://www.rapid7.com/advisories/R7-0017.html
414	IP-over-IEEE1394 printing.
415	some MINGW32 changes.
416	updates for autoconf 2.5
417	fixes for print-aodv.c - check for too short packets
418	formatting changes to print-ascii for hex output.
419	check for too short packets: print-bgp.c, print-bootp.c, print-cdp.c,
420		print-chdlc.c, print-domain.c, print-icmp.c, print-icmp6.c,
421		print-ip.c, print-lwres.c, print-ospf.c, print-pim.c,
422		print-ppp.c,print-pppoe.c, print-rsvp.c, print-wb.c
423	print-ether.c - better handling of unknown types.
424	print-isoclns.c - additional decoding of types.
425	print-llc.c - strings for LLC names added.
426	print-pfloc.c - various enhancements
427	print-radius.c - better decoding to strings.
428
429Wed.   November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 3.8 release
430
431	changed syntax of -E argument so that multiple SAs can be decrypted
432	fixes for Digital Unix headers and Documentation
433	__attribute__ fixes
434	CDP changes from Terry Kennedy <terry@tmk.com>.
435	IPv6 mobility updates from Kazushi Sugyo <sugyo@pb.jp.nec.com>
436	Fixes for ASN.1 decoder for 2.100.3 forms.
437	Added a count of packets received and processed to clarify numbers.
438	Incorporated WinDUMP patches for Win32 builds.
439	PPPoE payload length headers.
440	Fixes for HP C compiler builds.
441	Use new pcap_breakloop() and pcap_findalldevs() if we can.
442	BGP output split into multiple lines.
443	Fixes to 802.11 decoding.
444	Fixes to PIM decoder.
445	SuperH is a CPU that can't handle unaligned access. Many fixes for
446		unaligned access work.
447	Fixes to Frame-Relay decoder for Q.933/922 frames.
448	Clarified when Solaris can do captures as non-root.
449	Added tests/ subdir for examples/regression tests.
450	New -U flag.	-flush stdout after every packet
451	New -A flag	-print ascii only
452	support for decoding IS-IS inside Cisco HDLC Frames
453	more verbosity for tftp decoder
454	mDNS decoder
455	new BFD decoder
456	cross compilation patches
457	RFC 3561 AODV support.
458	UDP/TCP pseudo-checksum properly for source-route options.
459	sanitized all files to modified BSD license
460	Add support for RFC 2625 IP-over-Fibre Channel.
461	fixes for DECnet support.
462	Support RFC 2684 bridging of Ethernet, 802.5 Token Ring, and FDDI.
463	RFC 2684 encapsulation of BPDUs.
464
465Tuesday, February 25, 2003. fenner@research.att.com.  3.7.2 release
466
467	Fixed infinite loop when parsing malformed isakmp packets.
468	 (reported by iDefense; already fixed in CVS)
469	Fixed infinite loop when parsing malformed BGP packets.
470	Fixed buffer overflow with certain malformed NFS packets.
471	Pretty-print unprintable network names in 802.11 printer.
472	Handle truncated nbp (appletalk) packets.
473	Updated DHCPv6 printer to match draft-ietf-dhc-dhcpv6-22.txt
474	Print IP protocol name even if we don't have a printer for it.
475	Print IP protocol name or number for fragments.
476	Print the whole MPLS label stack, not just the top label.
477	Print request header and file handle for NFS v3 FSINFO and PATHCONF
478	 requests.
479	Fix NFS packet truncation checks.
480	Handle "old" DR-Priority and Bidir-Capable PIM HELLO options.
481	Handle unknown RADIUS attributes properly.
482	Fix an ASN.1 parsing error that would cause e.g. the OID
483	 2.100.3 to be misrepresented as 4.20.3 .
484
485Monday, January 21, 2002. mcr@sandelman.ottawa.on.ca. Summary for 3.7 release
486see http://www.tcpdump.org/cvs-log/2002-01-21.10:16:48.html for commit log.
487	keyword "ipx" added.
488	Better OSI/802.2 support on Linux.
489	IEEE 802.11 support, from clenahan@fortresstech.com, achirica@ttd.net.
490	LLC SAP support for FDDI/token ring/RFC-1483 style ATM
491	BXXP protocol was replaced by the BEEP protocol;
492	improvements to SNAP demux.
493	Changes to "any" interface documentation.
494	Documentation on pcap_stats() counters.
495	Fix a memory leak found by Miklos Szeredi - pcap_ether_aton().
496	Added MPLS encapsulation decoding per RFC3032.
497	DNS dissector handles TKEY, TSIG and IXFR.
498	adaptive SLIP interface patch from Igor Khristophorov <igor@atdot.org>
499	SMB printing has much improved bounds checks
500	OUI 0x0000f8 decoded as encapsulated ethernet for Cisco-custom bridging
501	Zephyr support, from Nickolai Zeldovich <kolya@MIT.EDU>.
502	Solaris - devices with digits in them. Stefan Hudson <hudson@mbay.net>
503	IPX socket 0x85be is for Cisco EIGRP over IPX.
504	Improvements to fragmented ESP handling.
505	SCTP support from Armando L. Caro Jr. <acaro@mail.eecis.udel.edu>
506	Linux ARPHDR_ATM support fixed.
507	Added a "netbeui" keyword, which selects NetBEUI packets.
508	IPv6 ND improvements, MobileIP dissector, 2292bis-02 for RA option.
509	Handle ARPHDR_HDLC from Marcus Felipe Pereira <marcus@task.com.br>.
510	Handle IPX socket 0x553 -> NetBIOS-over-IPX socket, "nwlink-dgm"
511	Better Linux libc5 compat.
512	BIND9 lwres dissector added.
513	MIPS and SPARC get strict alignment macros (affects print-bgp.c)
514	Apple LocalTalk LINKTYPE_ reserved.
515	New time stamp formats documented.
516	DHCP6 updated to draft-22.txt spec.
517	ICMP types/codes now accept symbolic names.
518	Add SIGINFO handler from LBL
519	encrypted CIPE tunnels in IRIX, from Franz Schaefer <schaefer@mond.at>.
520	now we are -Wstrict-prototype clean.
521	NetBSD DLT_PPP_ETHER; adapted from Martin Husemann <martin@netbsd.org>.
522	PPPoE dissector cleaned up.
523	Support for LocalTalk hardware, from Uns Lider <unslider@miranda.org>.
524	In dissector, now the caller prints the IP addresses rather than proto.
525	cjclark@alum.mit.edu: print the IP proto for non-initial fragments.
526	LLC frames with a DSAP and LSAP of 0xe0 are IPX frames.
527	Linux cooked frames with a type value of LINUX_SLL_P_802_3 are IPX.
528	captures on the "any" device won't be done in promiscuous mode
529	Token Ring support on DLPI - Onno van der Linden <onno@simplex.nl>
530	ARCNet support, from NetBSD.
531	HSRP dissector, from Julian Cowley <julian@lava.net>.
532	Handle (GRE-encapsulated) PPTP
533	added -C option to rotate save file every optarg * 1,000,000 bytes.
534	support for "vrrp" name - NetBSD, by Klaus Klein <kleink@netbsd.org>.
535	PPTP support, from Motonori Shindo <mshindo@mshindo.net>.
536	IS-IS over PPP support, from Hannes Gredler <hannes@juniper.net>.
537	CNFP support for IPv6,format. Harry Raaymakers <harryr@connect.com.au>.
538	ESP printing updated to RFC2406.
539	HP-UX can now handle large number of PPAs.
540	MSDP printer added.
541	L2TP dissector improvements from Motonori Shindo.
542
543Tuesday January 9, 2001. mcr@sandelman.ottawa.on.ca. Summary for 3.6 release
544	Cleaned up documentation.
545	Promisc mode fixes for Linux
546	IPsec changes/cleanups.
547	Alignment fixes for picky architectures
548
549	Removed dependency on native headers for packet dissectors.
550	Removed Linux specific headers that were shipped
551
552	libpcap changes provide for exchanging capture files between
553	  systems. Save files now have well known PACKET_ values instead of
554	  depending upon system dependant mappings of DLT_* types.
555
556	Support for computing/checking IP and UDP/TCP checksums.
557
558	Updated autoconf stock files.
559
560	IPv6 improvements: dhcp (draft-15), mobile-ip6, ppp, ospf6,
561
562	Added dissector support for: ISOCLNS, Token Ring, IGMPv3, bxxp,
563		timed, vrrp, radius, chdlc, cnfp, cdp, IEEE802.1d, raw-AppleTalk
564
565	Added filtering support for: VLANs, ESIS, ISIS
566
567	Improvements to: print-telnet, IPTalk, bootp/dhcp, ECN, PPP,
568		L2TP, PPPoE
569
570	HP-UX 11.0 -- find the right dlpi device.
571	Solaris 8 - IPv6 works
572	Linux - Added support for an "any" device to capture on all interfaces
573
574	Security fixes: buffer overrun audit done. Strcpy replaced with
575		strlcpy, sprintf replaced with snprintf.
576	Look for lex problems, and warn about them.
577
578
579v3.5 Fri Jan 28 18:00:00 PST 2000
580
581Bill Fenner <fenner@research.att.com>
582- switch to config.h for autoconf
583- unify RCSID strings
584- Updated PIMv1, PIMv2, DVMRP, IGMP parsers, add Cisco Auto-RP parser
585- Really fix the RIP printer
586- Fix MAC address -> name translation.
587- some -Wall -Wformat fixes
588- update makemib to parse much of SMIv2
589- Print TCP sequence # with -vv even if you normally wouldn't
590- Print as much of IP/TCP/UDP headers as possible even if truncated.
591
592itojun@iijlab.net
593- -X will make a ascii dump.  from netbsd.
594- telnet command sequence decoder (ff xx xx).  from netbsd.
595- print-bgp.c: improve options printing.  ugly code exists for
596  unaligned option parsing (need some fix).
597- const poisoning in SMB decoder.
598- -Wall -Werror clean checks.
599- bring in KAME IPv6/IPsec decoding code.
600
601Assar Westerlund  <assar@sics.se>
602- SNMPv2 and SNMPv3 printer
603- If compiled with libsmi, tcpdump can load MIBs on the fly to decode
604  SNMP packets.
605- Incorporate NFS parsing code from NetBSD.  Adds support for nfsv3.
606- portability fixes
607- permit building in different directories.
608
609Ken Hornstein <kenh@cmf.nrl.navy.mil>
610- bring in code at
611  /afs/transarc.com/public/afs-contrib/tools/tcpdump for parsing
612  AFS3 packets
613
614Andrew Tridgell <tridge@linuxcare.com>
615- SMB printing code
616
617Love <lha@stacken.kth.se>
618- print-rx.c: add code for printing MakeDir and StoreStatus.  Also
619  change date format to the right one.
620
621Michael C. Richardson  <mcr@sandelman.ottawa.on.ca>
622- Created tcpdump.org repository
623
624v3.4 Sat Jul 25 12:40:55 PDT 1998
625
626- Hardwire Linux slip support since it's too hard to detect.
627
628- Redo configuration of "network" libraries (-lsocket and -lnsl) to
629  deal with IRIX. Thanks to John Hawkinson (jhawk@mit.edu)
630
631- Added -a which tries to translate network and broadcast addresses to
632  names. Suggested by Rob van Nieuwkerk (robn@verdi.et.tudelft.nl)
633
634- Added a configure option to disable gcc.
635
636- Added a "raw" packet printer.
637
638- Not having an interface address is no longer fatal. Requested by John
639  Hawkinson.
640
641- Rework signal setup to accommodate Linux.
642
643- OSPF truncation check fix. Also display the type of OSPF packets
644  using MD5 authentication. Thanks to Brian Wellington
645  (bwelling@tis.com)
646
647- Fix truncation check bugs in the Kerberos printer. Reported by Ezra
648  Peisach (epeisach@mit.edu)
649
650- Don't catch SIGHUP when invoked with nohup(1). Thanks to Dave Plonka
651  (plonka@mfa.com)
652
653- Specify full install target as a way of detecting if install
654  directory does not exist. Thanks to Dave Plonka.
655
656- Bit-swap FDDI addresses for BSD/OS too. Thanks to Paul Vixie
657  (paul@vix.com)
658
659- Fix off-by-one bug when testing size of ethernet packets. Thanks to
660  Marty Leisner (leisner@sdsp.mc.xerox.com)
661
662- Add a local autoconf macro to check for routines in libraries; the
663  autoconf version is broken (it only puts the library name in the
664  cache variable name). Thanks to John Hawkinson.
665
666- Add a local autoconf macro to check for types; the autoconf version
667  is broken (it uses grep instead of actually compiling a code fragment).
668
669- Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header
670  formats.
671
672- Extend OSF ip header workaround to versions 1 and 2.
673
674- Fix some signed problems in the nfs printer. As reported by David
675  Sacerdote (davids@silence.secnet.com)
676
677- Detect group wheel and use it as the default since BSD/OS' install
678  can't hack numeric groups. Reported by David Sacerdote.
679
680- AIX needs special loader options. Thanks to Jonathan I. Kamens
681  (jik@cam.ov.com)
682
683- Fixed the nfs printer to print port numbers in decimal. Thanks to
684  Kent Vander Velden (graphix@iastate.edu)
685
686- Find installed libpcap in /usr/local/lib when not using gcc.
687
688- Disallow network masks with non-network bits set.
689
690- Attempt to detect "egcs" versions of gcc.
691
692- Add missing closing double quotes when displaying bootp strings.
693  Reported by Viet-Trung Luu (vluu@picard.math.uwaterloo.ca)
694
695v3.3 Sat Nov 30 20:56:27 PST 1996
696
697- Added Linux support.
698
699- GRE encapsulated packet printer thanks to John Hawkinson
700  (jhawk@mit.edu)
701
702- Rewrite gmt2local() to avoid problematic os dependencies.
703
704- Suppress nfs truncation message on errors.
705
706- Add missing m4 quoting in AC_LBL_UNALIGNED_ACCESS autoconf macro.
707  Reported by Joachim Ott (ott@ardala.han.de)
708
709- Enable "ip_hl vs. ip_vhl" workaround for OSF4 too.
710
711- Print arp hardware type in host order. Thanks to Onno van der Linden
712  (onno@simplex.nl)
713
714- Avoid solaris compiler warnings. Thanks to Bruce Barnett
715  (barnett@grymoire.crd.ge.com)
716
717- Fix rip printer to not print one more route than is actually in the
718  packet. Thanks to Jean-Luc Richier (Jean-Luc.Richier@imag.fr) and
719  Bill Fenner (fenner@parc.xerox.com)
720
721- Use autoconf endian detection since BYTE_ORDER isn't defined on all systems.
722
723- Fix dvmrp printer truncation checks and add a dvmrp probe printer.
724  Thanks to Danny J. Mitzel (mitzel@ipsilon.com)
725
726- Rewrite ospf printer to improve truncation checks.
727
728- Don't parse tcp options past the EOL. As noted by David Sacerdote
729  (davids@secnet.com). Also, check tcp options to make sure they ar
730  actually in the tcp header (in addition to the normal truncation
731  checks). Fix the SACK code to print the N blocks (instead of the
732  first block N times).
733
734- Don't say really small UDP packets are truncated just because they
735  aren't big enough to be a RPC. As noted by David Sacerdote.
736
737v3.2.1 Sun Jul 14 03:02:26 PDT 1996
738
739- Added rfc1716 icmp codes as suggested by Martin Fredriksson
740  (martin@msp.se)
741
742- Print mtu for icmp unreach need frag packets. Thanks to John
743  Hawkinson (jhawk@mit.edu)
744
745- Decode icmp router discovery messages. Thanks to Jeffrey Honig
746  (jch@bsdi.com)
747
748- Added a printer entry for DLT_IEEE802 as suggested by Tak Kushida
749  (kushida@trl.ibm.co.jp)
750
751- Check igmp checksum if possible. Thanks to John Hawkinson.
752
753- Made changes for SINIX. Thanks to Andrej Borsenkow
754  (borsenkow.msk@sni.de)
755
756- Use autoconf's idea of the top level directory in install targets.
757  Thanks to John Hawkinson.
758
759- Avoid infinite loop in tcp options printing code. Thanks to Jeffrey
760  Mogul (mogul@pa.dec.com)
761
762- Avoid using -lsocket in IRIX 5.2 and earlier since it breaks snoop.
763  Thanks to John Hawkinson.
764
765- Added some more packet truncation checks.
766
767- On systems that have it, use sigset() instead of signal() since
768  signal() has different semantics on these systems.
769
770- Fixed some more alignment problems on the alpha.
771
772- Add code to massage unprintable characters in the domain and ipx
773  printers. Thanks to John Hawkinson.
774
775- Added explicit netmask support. Thanks to Steve Nuchia
776  (steve@research.oknet.com)
777
778- Add "sca" keyword (for DEC cluster services) as suggested by Terry
779  Kennedy (terry@spcvxa.spc.edu)
780
781- Add "atalk" keyword as suggested by John Hawkinson.
782
783- Added an igrp printer. Thanks to Francis Dupont
784  (francis.dupont@inria.fr)
785
786- Print IPX net numbers in hex a la Novell Netware. Thanks to Terry
787  Kennedy (terry@spcvxa.spc.edu)
788
789- Fixed snmp extended tag field parsing bug. Thanks to Pascal Hennequin
790  (pascal.hennequin@hugo.int-evry.fr)
791
792- Added some ETHERTYPEs missing on some systems.
793
794- Added truncated packet macros and various checks.
795
796- Fixed endian problems with the DECnet printer.
797
798- Use $CC when checking gcc version. Thanks to Carl Lindberg
799  (carl_lindberg@blacksmith.com)
800
801- Fixes for AIX (although this system is not yet supported). Thanks to
802  John Hawkinson.
803
804- Fix bugs in the autoconf misaligned accesses code fragment.
805
806- Include sys/param.h to get BYTE_ORDER in a few places. Thanks to
807  Pavlin Ivanov Radoslavov (pavlin@cs.titech.ac.jp)
808
809v3.2 Sun Jun 23 02:28:10 PDT 1996
810
811- Print new icmp unreachable codes as suggested by Martin Fredriksson
812  (martin@msp.se). Also print code value when unknown for icmp redirect
813  and time exceeded.
814
815- Fix an alignment endian bug in getname(). Thanks to John Hawkinson.
816
817- Define "new" domain record types if not found in arpa/nameserv.h.
818  Resulted from a suggestion from John Hawkinson (jhawk@mit.edu). Also
819  fixed an endian bug when printing mx record and added some new record
820  types.
821
822- Added RIP V2 support. Thanks to Jeffrey Honig (jch@bsdi.com)
823
824- Added T/TCP options printing. As suggested by Richard Stevens
825  (rstevens@noao.edu)
826
827- Use autoconf to detect architectures that can't handle misaligned
828  accesses.
829
830v3.1 Thu Jun 13 20:59:32 PDT 1996
831
832- Changed u_int32/int32 to u_int32_t/int32_t to be consistent with bsd
833  and bind (as suggested by Charles Hannum).
834
835- Port to GNU autoconf.
836
837- Add support for printing DVMRP and PIM traffic thanks to
838  Havard Eidnes (Havard.Eidnes@runit.sintef.no).
839
840- Fix AppleTalk, IPX and DECnet byte order problems due to wrong endian
841  define being referenced. Reported by Terry Kennedy.
842
843- Minor fixes to the man page thanks to Mark Andrews.
844
845- Endian fixes to RTP and vat packet dumpers, thanks to Bruce Mah
846  (bmah@cs.berkeley.edu).
847
848- Added support for new dns types, thanks to Rainer Orth.
849
850- Fixed tftp_print() to print the block number for ACKs.
851
852- Document -dd and -ddd. Resulted from a bug report from Charlie Slater
853  (cslater@imatek.com).
854
855- Check return status from malloc/calloc/etc.
856
857- Check return status from pcap_loop() so we can print an error and
858  exit with a bad status if there were problems.
859
860- Bail if ip option length is <= 0. Resulted from a bug report from
861  Darren Reed (darrenr@vitruvius.arbld.unimelb.edu.au).
862
863- Print out a little more information for sun rpc packets.
864
865- Add suport for Kerberos 4 thanks to John Hawkinson (jhawk@mit.edu).
866
867- Fixed the Fix EXTRACT_SHORT() and EXTRACT_LONG() macros (which were
868  wrong on little endian machines).
869
870- Fixed alignment bug in ipx_decode(). Thanks to Matt Crawford
871  (crawdad@fnal.gov).
872
873- Fix ntp_print() to not print garbage when the stratum is
874  "unspecified." Thanks to Deus Ex Machina (root@belle.bork.com).
875
876- Rewrote tcp options printer code to check for truncation. Added
877  selective acknowledgment case.
878
879- Fixed an endian bug in the ospf printer. Thanks to Jeffrey C Honig
880  (jch@bsdi.com)
881
882- Fix rip printer to handle 4.4 BSD sockaddr struct which only uses one
883  octet for the sa_family member. Thanks to Yoshitaka Tokugawa
884  (toku@dit.co.jp)
885
886- Don't checksum ip header if we don't have all of it. Thanks to John
887  Hawkinson (jhawk@mit.edu).
888
889- Print out hostnames if possible in egp printer. Thanks to Jeffrey
890  Honig (jhc@bsdi.com)
891
892
893v3.1a1 Wed May  3 19:21:11 PDT 1995
894
895- Include time.h when SVR4 is defined to avoid problems under Solaris
896  2.3.
897
898- Fix etheraddr_string() in the ETHER_SERVICE to return the saved
899  strings, not the local buffer. Thanks to Stefan Petri
900  (petri@ibr.cs.tu-bs.de).
901
902- Detect when pcap raises the snaplen (e.g. with snit). Print a warning
903  that the selected value was not used. Thanks to Pascal Hennequin
904  (Pascal.Hennequin@hugo.int-evry.fr).
905
906- Add a truncated packet test to print-nfs.c. Thanks to Pascal Hennequin.
907
908- BYTEORDER -> BYTE_ORDER Thanks to Terry Kennedy (terry@spcvxa.spc.edu).
909
910v3.0.3 Sun Oct  1 18:35:00 GMT 1995
911
912- Although there never was a 3.0.3 release, the linux boys cleverly
913  "released" one in late 1995.
914
915v3.0.2 Thu Apr 20 21:28:16 PDT 1995
916
917- Change configuration to not use gcc v2 flags with gcc v1.
918
919- Redo gmt2local() so that it works under BSDI (which seems to return
920  an empty timezone struct from gettimeofday()). Based on report from
921  Terry Kennedy (terry@spcvxa.spc.edu).
922
923- Change configure to recognize IP[0-9]* as "mips" SGI hardware. Based
924  on report from Mark Andrews (mandrews@alias.com).
925
926- Don't pass cc flags to gcc. Resulted from a bug report from Rainer
927  Orth (ro@techfak.uni-bielefeld.de).
928
929- Fixed printout of connection id for uncompressed tcp slip packets.
930  Resulted from a bug report from Richard Stevens (rstevens@noao.edu).
931
932- Hack around deficiency in Ultrix's make.
933
934- Add ETHERTYPE_TRAIL define which is missing from irix5.
935
936v3.0.1 Wed Aug 31 22:42:26 PDT 1994
937
938- Fix problems with gcc2 vs. malloc() and read() prototypes under SunOS 4.
939
940v3.0 Mon Jun 20 19:23:27 PDT 1994
941
942- Added support for printing tcp option timestamps thanks to
943  Mark Andrews (mandrews@alias.com).
944
945- Reorganize protocol dumpers to take const pointers to packets so they
946  never change the contents (i.e., they used to do endian conversions
947  in place).  Previously, whenever more than one pass was taken over
948  the packet, the packet contents would be dumped incorrectly (i.e.,
949  the output form -x would be wrong on little endian machines because
950  the protocol dumpers would modify the data).  Thanks to Charles Hannum
951  (mycroft@gnu.ai.mit.edu) for reporting this problem.
952
953- Added support for decnet protocol dumping thanks to Jeff Mogul
954  (mogul@pa.dec.com).
955
956- Fix bug that caused length of packet to be incorrectly printed
957  (off by ether header size) for unknown ethernet types thanks
958  to Greg Miller (gmiller@kayak.mitre.org).
959
960- Added support for IPX protocol dumping thanks to Brad Parker
961  (brad@fcr.com).
962
963- Added check to verify IP header checksum under -v thanks to
964  Brad Parker (brad@fcr.com).
965
966- Move packet capture code to new libpcap library (which is
967  packaged separately).
968
969- Prototype everything and assume an ansi compiler.
970
971- print-arp.c: Print hardware ethernet addresses if they're not
972  what we expect.
973
974- print-bootp.c: Decode the cmu vendor field. Add RFC1497 tags.
975  Many helpful suggestions from Gordon Ross (gwr@jericho.mc.com).
976
977- print-fddi.c: Improvements. Thanks to Jeffrey Mogul
978  (mogul@pa.dec.com).
979
980- print-icmp.c: Byte swap netmask before printing. Thanks to
981  Richard Stevens (rstevens@noao.edu). Print icmp type when unknown.
982
983- print-ip.c: Print the inner ip datagram of ip-in-ip encapsulated packets.
984  By default, only the inner packet is dumped, appended with the token
985  "(encap)".  Under -v, both the inner and output packets are dumped
986  (on the same line).  Note that the filter applies to the original packet,
987  not the encapsulated packet.  So if you run tcpdump on a net with an
988  IP Multicast tunnel, you cannot filter out the datagrams using the
989  conventional syntax.  (You can filter away all the ip-in-ip traffic
990  with "not ip proto 4".)
991
992- print-nfs.c: Keep pending rpc's in circular table. Add generic
993  nfs header and remove os dependences. Thanks to Jeffrey Mogul.
994
995- print-ospf.c: Improvements. Thanks to Jeffrey Mogul.
996
997- tcpdump.c: Add -T flag allows interpretation of "vat", "wb", "rpc"
998  (sunrpc) and rtp packets. Added "inbound" and "outbound" keywords
999  Add && and || operators
1000
1001v2.2.1 Tue Jun 6 17:57:22 PDT 1992
1002
1003- Fix bug with -c flag.
1004
1005v2.2 Fri May 22 17:19:41 PDT 1992
1006
1007- savefile.c: Remove hack that shouldn't have been exported. Add
1008  truncate checks.
1009
1010- Added the 'icmp' keyword.  For example, 'icmp[0] != 8 and icmp[0] != 0'
1011  matches non-echo/reply ICMP packets.
1012
1013- Many improvements to filter code optimizer.
1014
1015- Added 'multicast' keyword and extended the 'broadcast' keyword can now be
1016  so that protocol qualifications are allowed. For example, "ip broadcast"
1017  and "ether multicast" are valid filters.
1018
1019- Added support for monitoring the loopback interface (i.e. 'tcpdump -i lo').
1020  Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) contributed the kernel
1021  patches to netinet/if_loop.c.
1022
1023- Added support for the Ungermann-Bass Ethernet on IBM/PC-RTs running AOS.
1024  Contact Jeffrey Honig (jch@MITCHELL.CIT.CORNELL.EDU) for the diffs.
1025
1026- Added EGP and OSPF printers, thanks to Jeffrey Honig.
1027
1028v2.1 Tue Jan 28 11:00:14 PST 1992
1029
1030- Internal release (never publically exported).
1031
1032v2.0.1 Sun Jan 26 21:10:10 PDT
1033
1034- Various byte ordering fixes.
1035
1036- Add truncation checks.
1037
1038- inet.c: Support BSD style SIOCGIFCONF.
1039
1040- nametoaddr.c: Handle multi addresses for single host.
1041
1042- optimize.c: Rewritten.
1043
1044- pcap-bpf.c: don't choke when we get ptraced. only set promiscuous
1045  for broadcast nets.
1046
1047- print-atal.c: Fix an alignment bug (thanks to
1048  stanonik@nprdc.navy.mil) Add missing printf() argument.
1049
1050- print-bootp.c: First attempt at decoding the vendor buffer.
1051
1052- print-domain.c: Fix truncation checks.
1053
1054- print-icmp.c: Calculate length of packets from the ip header.
1055
1056- print-ip.c: Print frag id in decimal (so it's easier to match up
1057  with non-frags). Add support for ospf, egp and igmp.
1058
1059- print-nfs.c: Lots of changes.
1060
1061- print-ntp.c: Make some verbose output depend on -v.
1062
1063- print-snmp.c: New version from John LoVerso.
1064
1065- print-tcp.c: Print rfc1072 tcp options.
1066
1067- tcpdump.c: Print "0x" prefix for %x formats. Always print 6 digits
1068  (microseconds) worth of precision. Fix uid bugs.
1069
1070- A packet dumper has been added (thanks to Jeff Mogul of DECWRL).
1071  With this option, you can create an architecture independent binary
1072  trace file in real time, without the overhead of the packet printer.
1073  At a later time, the packets can be filtered (again) and printed.
1074
1075- BSD is supported.  You must have BPF in your kernel.
1076  Since the filtering is now done in the kernel, fewer packets are
1077  dropped.  In fact, with BPF and the packet dumper option, a measly
1078  Sun 3/50 can keep up with a busy network.
1079
1080- Compressed SLIP packets can now be dumped, provided you use our
1081  SLIP software and BPF.  These packets are dumped as any other IP
1082  packet; the compressed headers are dumped with the '-e' option.
1083
1084- Machines with little-endian byte ordering are supported (thanks to
1085  Jeff Mogul).
1086
1087- Ultrix 4.0 is supported (also thanks to Jeff Mogul).
1088
1089- IBM RT and Stanford Enetfilter support has been added by
1090  Rayan Zachariassen <rayan@canet.ca>.  Tcpdump has been tested under
1091  both the vanilla Enetfilter interface, and the extended interface
1092  (#ifdef'd by IBMRTPC) present in the MERIT version of the Enetfilter.
1093
1094- TFTP packets are now printed (requests only).
1095
1096- BOOTP packets are now printed.
1097
1098- SNMP packets are now printed. (thanks to John LoVerso of Xylogics).
1099
1100- Sparc architectures, including the Sparcstation-1, are now
1101  supported thanks to Steve McCanne and Craig Leres.
1102
1103- SunOS 4 is now supported thanks to Micky Liu of Columbia
1104  University (micky@cunixc.cc.columbia.edu).
1105
1106- IP options are now printed.
1107
1108- RIP packets are now printed.
1109
1110- There's a -v flag that prints out more information than the
1111  default (e.g., it will enable printing of IP ttl, tos and id)
1112  and -q flag that prints out less (e.g., it will disable
1113  interpretation of AppleTalk-in-UDP).
1114
1115- The grammar has undergone substantial changes (if you have an
1116  earlier version of tcpdump, you should re-read the manual
1117  entry).
1118
1119  The most useful change is the addition of an expression
1120  syntax that lets you filter on arbitrary fields or values in the
1121  packet.  E.g., "ip[0] > 0x45" would print only packets with IP
1122  options, "tcp[13] & 3 != 0" would print only TCP SYN and FIN
1123  packets.
1124
1125  The most painful change is that concatenation no longer means
1126  "and" -- e.g., you have to say "host foo and port bar" instead
1127  of "host foo port bar".  The up side to this down is that
1128  repeated qualifiers can be omitted, making most filter
1129  expressions shorter.  E.g., you can now say "ip host foo and
1130  (bar or baz)" to look at ip traffic between hosts foo and bar or
1131  between hosts foo and baz.  [The old way of saying this was "ip
1132  host foo and (ip host bar or ip host baz)".]
1133
1134v2.0 Sun Jan 13 12:20:40 PST 1991
1135
1136- Initial public release.
1137