1 /* 2 * Qualcomm Atheros OUI and vendor specific assignments 3 * Copyright (c) 2014-2015, Qualcomm Atheros, Inc. 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9 #ifndef QCA_VENDOR_H 10 #define QCA_VENDOR_H 11 12 /* 13 * This file is a registry of identifier assignments from the Qualcomm Atheros 14 * OUI 00:13:74 for purposes other than MAC address assignment. New identifiers 15 * can be assigned through normal review process for changes to the upstream 16 * hostap.git repository. 17 */ 18 19 #define OUI_QCA 0x001374 20 21 /** 22 * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs 23 */ 24 enum qca_radiotap_vendor_ids { 25 QCA_RADIOTAP_VID_WLANTEST = 0, 26 }; 27 28 /** 29 * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers 30 * 31 * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0 32 * 33 * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event 34 * 35 * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use 36 * internal BSS-selection. This command uses 37 * @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy 38 * for the current connection (i.e., changes policy set by the nl80211 39 * Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be 40 * included to indicate which BSS to use in case roaming is disabled. 41 * 42 * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency 43 * ranges to avoid to reduce issues due to interference or internal 44 * co-existence information in the driver. The event data structure is 45 * defined in struct qca_avoid_freq_list. 46 * 47 * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support 48 * for DFS offloading. 49 * 50 * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass 51 * NAN Request/Response and NAN Indication messages. These messages are 52 * interpreted between the framework and the firmware component. 53 * 54 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be 55 * used to configure PMK to the driver even when not connected. This can 56 * be used to request offloading of key management operations. Only used 57 * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. 58 * 59 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of 60 * NL80211_CMD_ROAM event with optional attributes including information 61 * from offloaded key management operation. Uses 62 * enum qca_wlan_vendor_attr_roam_auth attributes. Only used 63 * if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD. 64 * 65 * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to 66 * invoke the ACS function in device and pass selected channels to 67 * hostapd. 68 * 69 * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features 70 * supported by the driver. enum qca_wlan_vendor_features defines 71 * the possible features. 72 * 73 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver, 74 * which supports DFS offloading, to indicate a channel availability check 75 * start. 76 * 77 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver, 78 * which supports DFS offloading, to indicate a channel availability check 79 * completion. 80 * 81 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver, 82 * which supports DFS offloading, to indicate that the channel availability 83 * check aborted, no change to the channel status. 84 * 85 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by 86 * driver, which supports DFS offloading, to indicate that the 87 * Non-Occupancy Period for this channel is over, channel becomes usable. 88 * 89 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver, 90 * which supports DFS offloading, to indicate a radar pattern has been 91 * detected. The channel is now unusable. 92 */ 93 enum qca_nl80211_vendor_subcmds { 94 QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0, 95 QCA_NL80211_VENDOR_SUBCMD_TEST = 1, 96 /* subcmds 2..8 not yet allocated */ 97 QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9, 98 QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10, 99 QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY = 11, 100 QCA_NL80211_VENDOR_SUBCMD_NAN = 12, 101 QCA_NL80211_VENDOR_SUBMCD_STATS_EXT = 13, 102 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14, 103 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15, 104 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16, 105 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17, 106 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18, 107 QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19, 108 QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20, 109 QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21, 110 QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22, 111 QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23, 112 QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24, 113 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25, 114 QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26, 115 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27, 116 QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28, 117 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29, 118 QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30, 119 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31, 120 QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32, 121 QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33, 122 QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34, 123 QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35, 124 QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36, 125 QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37, 126 QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38, 127 QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39, 128 QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40, 129 QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41, 130 QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42, 131 /* 43..49 - reserved for QCA */ 132 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50, 133 QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51, 134 QCA_NL80211_VENDOR_SUBCMD_APFIND = 52, 135 /* 53 - reserved - was used by QCA, but not in use anymore */ 136 QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54, 137 QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55, 138 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56, 139 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57, 140 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58, 141 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59, 142 QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60, 143 /* 61-90 - reserved for QCA */ 144 QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91, 145 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92, 146 QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93, 147 QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94, 148 QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95, 149 QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96, 150 QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97, 151 QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98, 152 QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99, 153 QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100, 154 QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101, 155 QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102, 156 QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103, 157 QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104, 158 QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105, 159 QCA_NL80211_VENDOR_SUBCMD_TRIGGER_SCAN = 106, 160 QCA_NL80211_VENDOR_SUBCMD_SCAN_DONE = 107, 161 QCA_NL80211_VENDOR_SUBCMD_OTA_TEST = 108, 162 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109, 163 /* 110..114 - reserved for QCA */ 164 QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115, 165 /* 116..118 - reserved for QCA */ 166 }; 167 168 169 enum qca_wlan_vendor_attr { 170 QCA_WLAN_VENDOR_ATTR_INVALID = 0, 171 /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */ 172 QCA_WLAN_VENDOR_ATTR_DFS = 1, 173 /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */ 174 QCA_WLAN_VENDOR_ATTR_NAN = 2, 175 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 176 QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3, 177 /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */ 178 QCA_WLAN_VENDOR_ATTR_IFINDEX = 4, 179 /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined 180 * by enum qca_roaming_policy. */ 181 QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5, 182 QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6, 183 /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ 184 QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7, 185 QCA_WLAN_VENDOR_ATTR_TEST = 8, 186 /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */ 187 /* Unsigned 32-bit value. */ 188 QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9, 189 /* Unsigned 32-bit value */ 190 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10, 191 /* Unsigned 32-bit value */ 192 QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11, 193 /* Unsigned 32-bit value from enum qca_set_band. */ 194 QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12, 195 /* keep last */ 196 QCA_WLAN_VENDOR_ATTR_AFTER_LAST, 197 QCA_WLAN_VENDOR_ATTR_MAX = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1, 198 }; 199 200 201 enum qca_roaming_policy { 202 QCA_ROAMING_NOT_ALLOWED, 203 QCA_ROAMING_ALLOWED_WITHIN_ESS, 204 }; 205 206 enum qca_wlan_vendor_attr_roam_auth { 207 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0, 208 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID, 209 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE, 210 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE, 211 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED, 212 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR, 213 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK, 214 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK, 215 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_SUBNET_STATUS, 216 /* keep last */ 217 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST, 218 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX = 219 QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1 220 }; 221 222 enum qca_wlan_vendor_attr_acs_offload { 223 QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0, 224 QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL, 225 QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL, 226 QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE, 227 QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED, 228 QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED, 229 QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED, 230 QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH, 231 QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST, 232 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL, 233 QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL, 234 QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST, 235 /* keep last */ 236 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST, 237 QCA_WLAN_VENDOR_ATTR_ACS_MAX = 238 QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1 239 }; 240 241 enum qca_wlan_vendor_acs_hw_mode { 242 QCA_ACS_MODE_IEEE80211B, 243 QCA_ACS_MODE_IEEE80211G, 244 QCA_ACS_MODE_IEEE80211A, 245 QCA_ACS_MODE_IEEE80211AD, 246 QCA_ACS_MODE_IEEE80211ANY, 247 }; 248 249 /** 250 * enum qca_wlan_vendor_features - Vendor device/driver feature flags 251 * 252 * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key 253 * management offload, a mechanism where the station's firmware 254 * does the exchange with the AP to establish the temporal keys 255 * after roaming, rather than having the user space wpa_supplicant do it. 256 * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic 257 * band selection based on channel selection results. 258 * @QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS: Device supports 259 * simultaneous off-channel operations. 260 * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits 261 */ 262 enum qca_wlan_vendor_features { 263 QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD = 0, 264 QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY = 1, 265 QCA_WLAN_VENDOR_FEATURE_OFFCHANNEL_SIMULTANEOUS = 2, 266 NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */ 267 }; 268 269 /** 270 * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication 271 * 272 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to 273 * the offloaded data. 274 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded 275 * data. 276 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload 277 * indication. 278 */ 279 enum qca_wlan_vendor_attr_data_offload_ind { 280 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0, 281 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION, 282 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL, 283 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT, 284 285 /* keep last */ 286 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST, 287 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX = 288 QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1 289 }; 290 291 enum qca_vendor_attr_get_preferred_freq_list { 292 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID, 293 /* A 32-unsigned value; the interface type/mode for which the preferred 294 * frequency list is requested (see enum qca_iface_type for possible 295 * values); used in GET_PREFERRED_FREQ_LIST command from user-space to 296 * kernel and in the kernel response back to user-space. 297 */ 298 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE, 299 /* An array of 32-unsigned values; values are frequency (MHz); sent 300 * from kernel space to user space. 301 */ 302 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST, 303 /* keep last */ 304 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST, 305 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX = 306 QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1 307 }; 308 309 enum qca_vendor_attr_probable_oper_channel { 310 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID, 311 /* 32-bit unsigned value; indicates the connection/iface type likely to 312 * come on this channel (see enum qca_iface_type). 313 */ 314 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE, 315 /* 32-bit unsigned value; the frequency (MHz) of the probable channel */ 316 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ, 317 /* keep last */ 318 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST, 319 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX = 320 QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1 321 }; 322 323 enum qca_iface_type { 324 QCA_IFACE_TYPE_STA, 325 QCA_IFACE_TYPE_AP, 326 QCA_IFACE_TYPE_P2P_CLIENT, 327 QCA_IFACE_TYPE_P2P_GO, 328 QCA_IFACE_TYPE_IBSS, 329 QCA_IFACE_TYPE_TDLS, 330 }; 331 332 enum qca_set_band { 333 QCA_SETBAND_AUTO, 334 QCA_SETBAND_5G, 335 QCA_SETBAND_2G, 336 }; 337 338 /* IEEE 802.11 Vendor Specific elements */ 339 340 /** 341 * enum qca_vendor_element_id - QCA Vendor Specific element types 342 * 343 * These values are used to identify QCA Vendor Specific elements. The 344 * payload of the element starts with the three octet OUI (OUI_QCA) and 345 * is followed by a single octet type which is defined by this enum. 346 * 347 * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list. 348 * This element can be used to specify preference order for supported 349 * channels. The channels in this list are in preference order (the first 350 * one has the highest preference) and are described as a pair of 351 * (global) Operating Class and Channel Number (each one octet) fields. 352 * 353 * This extends the standard P2P functionality by providing option to have 354 * more than one preferred operating channel. When this element is present, 355 * it replaces the preference indicated in the Operating Channel attribute. 356 * For supporting other implementations, the Operating Channel attribute is 357 * expected to be used with the highest preference channel. Similarly, all 358 * the channels included in this Preferred channel list element are 359 * expected to be included in the Channel List attribute. 360 * 361 * This vendor element may be included in GO Negotiation Request, P2P 362 * Invitation Request, and Provision Discovery Request frames. 363 */ 364 enum qca_vendor_element_id { 365 QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0, 366 }; 367 368 /** 369 * enum qca_wlan_vendor_attr_scan - Specifies vendor scan attributes 370 * 371 * @QCA_WLAN_VENDOR_ATTR_SCAN_IE: IEs that should be included as part of scan 372 * @QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES: Nested unsigned 32-bit attributes 373 * with frequencies to be scanned (in MHz) 374 * @QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS: Nested attribute with SSIDs to be scanned 375 * @QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES: Nested array attribute of supported 376 * rates to be included 377 * @QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE: flag used to send probe requests 378 * at non CCK rate in 2GHz band 379 * @QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS: Unsigned 32-bit scan flags 380 * @QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE: Unsigned 64-bit cookie provided by the 381 * driver for the specific scan request 382 * @QCA_WLAN_VENDOR_ATTR_SCAN_STATUS: Unsigned 8-bit status of the scan 383 * request decoded as in enum scan_status 384 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC: 6-byte MAC address to use when randomisation 385 * scan flag is set 386 * @QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK: 6-byte MAC address mask to be used with 387 * randomisation 388 */ 389 enum qca_wlan_vendor_attr_scan { 390 QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0, 391 QCA_WLAN_VENDOR_ATTR_SCAN_IE, 392 QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES, 393 QCA_WLAN_VENDOR_ATTR_SCAN_SSIDS, 394 QCA_WLAN_VENDOR_ATTR_SCAN_SUPP_RATES, 395 QCA_WLAN_VENDOR_ATTR_SCAN_TX_NO_CCK_RATE, 396 QCA_WLAN_VENDOR_ATTR_SCAN_FLAGS, 397 QCA_WLAN_VENDOR_ATTR_SCAN_COOKIE, 398 QCA_WLAN_VENDOR_ATTR_SCAN_STATUS, 399 QCA_WLAN_VENDOR_ATTR_SCAN_MAC, 400 QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK, 401 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST, 402 QCA_WLAN_VENDOR_ATTR_SCAN_MAX = 403 QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1 404 }; 405 406 /** 407 * enum scan_status - Specifies the valid values the vendor scan attribute 408 * QCA_WLAN_VENDOR_ATTR_SCAN_STATUS can take 409 * 410 * @VENDOR_SCAN_STATUS_NEW_RESULTS: implies the vendor scan is successful with 411 * new scan results 412 * @VENDOR_SCAN_STATUS_ABORTED: implies the vendor scan was aborted in-between 413 */ 414 enum scan_status { 415 VENDOR_SCAN_STATUS_NEW_RESULTS, 416 VENDOR_SCAN_STATUS_ABORTED, 417 VENDOR_SCAN_STATUS_MAX, 418 }; 419 420 /** 421 * enum qca_vendor_attr_ota_test - Specifies the values for vendor 422 * command QCA_NL80211_VENDOR_SUBCMD_OTA_TEST 423 * @QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE: enable ota test 424 */ 425 enum qca_vendor_attr_ota_test { 426 QCA_WLAN_VENDOR_ATTR_OTA_TEST_INVALID, 427 /* 8-bit unsigned value to indicate if OTA test is enabled */ 428 QCA_WLAN_VENDOR_ATTR_OTA_TEST_ENABLE, 429 /* keep last */ 430 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST, 431 QCA_WLAN_VENDOR_ATTR_OTA_TEST_MAX = 432 QCA_WLAN_VENDOR_ATTR_OTA_TEST_AFTER_LAST - 1 433 }; 434 435 /** 436 * enum qca_vendor_attr_txpower_scale - vendor sub commands index 437 * 438 * @QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE: scaling value 439 */ 440 enum qca_vendor_attr_txpower_scale { 441 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_INVALID, 442 /* 8-bit unsigned value to indicate the scaling of tx power */ 443 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE, 444 /* keep last */ 445 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST, 446 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_MAX = 447 QCA_WLAN_VENDOR_ATTR_TXPOWER_SCALE_AFTER_LAST - 1 448 }; 449 450 /** 451 * enum qca_vendor_attr_txpower_decr_db - Attributes for TX power decrease 452 * 453 * These attributes are used with QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB. 454 */ 455 enum qca_vendor_attr_txpower_decr_db { 456 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_INVALID, 457 /* 8-bit unsigned value to indicate the reduction of TX power in dB for 458 * a virtual interface. */ 459 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB, 460 /* keep last */ 461 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST, 462 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_MAX = 463 QCA_WLAN_VENDOR_ATTR_TXPOWER_DECR_DB_AFTER_LAST - 1 464 }; 465 466 #endif /* QCA_VENDOR_H */ 467