1// /** 2// 3// (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.<BR> 4// Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved. <BR> 5// This program and the accompanying materials 6// are licensed and made available under the terms and conditions of the BSD License 7// which accompanies this distribution. The full text of the license may be found at 8// http://opensource.org/licenses/bsd-license.php 9// 10// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 11// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 12// 13// Module Name: 14// 15// UefiShellNetwork1CommandsLib.uni 16// 17// Abstract: 18// 19// String definitions for UEFI Shell 2.0 network 1 commands 20// 21// 22// **/ 23 24/=# 25 26#langdef en-US "english" 27 28#string STR_GEN_TOO_MANY #language en-US "%H%s%N: Too many arguments.\r\n" 29#string STR_GEN_TOO_FEW #language en-US "%H%s%N: Too few arguments.\r\n" 30#string STR_GEN_PARAM_INV #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n" 31#string STR_GEN_PROBLEM #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n" 32#string STR_GEN_PROBLEM_OP2 #language en-US "%H%s%N: Invalid argument - '%H%s%N'. Expected '%B%s%N' or '%B%s%N'.\r\n" 33#string STR_GEN_PROBLEM_VAL #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n" 34#string STR_GEN_NO_VALUE #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n" 35#string STR_GEN_ERR_AD #language en-US "%H%s%N: Access denied.\r\n" 36#string STR_GEN_ERR_UK #language en-US "%H%s%N: Status: %r\r\n" 37#string STR_GEN_PARAM_CON #language en-US "%H%s%N: Parameters conflict.\r\n" 38#string STR_GEN_FILE_OPEN_FAIL #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n" 39#string STR_GEN_FILE_AD #language en-US "%H%s%N: Access file error - '%H%s%N'\r\n" 40#string STR_GEN_CRLF #language en-US "\r\n" 41#string STR_GEN_NO_FILES #language en-US "%H%s%N: No matching files were found.\r\n" 42#string STR_GEN_DIR_NF #language en-US "%H%s%N: Directory not found - '%H%s%N'\r\n" 43#string STR_GEN_FILE_NF #language en-US "%H%s%N: File not found - '%H%s%N'\r\n" 44#string STR_GEN_IS_DIR #language en-US "%H%s%N: '%H%s%N' is a directory\r\n" 45#string STR_GEN_PROTOCOL_NF #language en-US "%H%s%N: The protocol '%H%s%N' is required and not found (%g).\r\n" 46 47#string STR_PING_CONFIG #language en-US "Config %r\r\n" 48#string STR_PING_GETMODE #language en-US "GetModeData %r\r\n" 49#string STR_PING_GETDATA #language en-US "GetData %r\r\n" 50#string STR_PING_SEND_REQUEST #language en-US "Echo request sequence %d did not complete successfully.\r\n" 51#string STR_PING_NOSOURCE_INDO #language en-US "There are no sources in %s's multicast domain.\r\n" 52#string STR_PING_NETWORK_ERROR #language en-US "%H%s%N: Network function failed with %r\r\n" 53#string STR_PING_CONFIGD_NIC_NF #language en-US "%H%s%N: No configured interfaces were found.\r\n" 54#string STR_PING_NOROUTE_FOUND #language en-US "There is no route to the destination '%B%s%N' from the source '%B%s%N' was found.\r\n" 55#string STR_PING_START #language en-US "Ping %s %d data bytes.\r\n" 56#string STR_PING_TIMEOUT #language en-US "Echo request sequence %d timeout.\r\n" 57#string STR_PING_REPLY_INFO #language en-US "%d bytes from %s : icmp_seq=%d ttl=%d time%c%dms\r\n" 58#string STR_PING_STAT #language en-US "\n%d packets transmitted, %d received, %d%% packet loss, time %dms\r\n" 59#string STR_PING_RTT #language en-US "\nRtt(round trip time) min=%dms max=%dms avg=%dms\r\n" 60 61#string STR_IFCONFIG_UNSUPPORTED_OPTION #language en-US "The option '%H%s%N' is unsupported now.\n" 62#string STR_IFCONFIG_LACK_OPTION #language en-US "Flags lack.\n" 63#string STR_IFCONFIG_LACK_INTERFACE #language en-US "Lack interface name.\n" 64#string STR_IFCONFIG_LACK_COMMAND #language en-US "Lack interface config option.\n" 65#string STR_IFCONFIG_INVALID_INTERFACE #language en-US "Invalid interface name.\n" 66#string STR_IFCONFIG_INVALID_IPADDRESS #language en-US "Invalid ipv4 address: '%H%s%N'\n" 67#string STR_IFCONFIG_DUPLICATE_COMMAND #language en-US "Duplicate commands. Bad command %H%s%N is skipped.\n" 68#string STR_IFCONFIG_CONFLICT_COMMAND #language en-US "Conflict commands. Bad command %H%s%N is skipped.\n" 69#string STR_IFCONFIG_UNKNOWN_COMMAND #language en-US "Unknown commands. Bad command %H%s%N is skipped.\n" 70#string STR_IFCONFIG_SET_ADDR_FAILED #language en-US "Failed to set address.\n" 71#string STR_IFCONFIG_ROUTES_SIZE #language en-US "\n%H Routes (%d entries):\n" 72#string STR_IFCONFIG_ROUTES_ENTRY_INDEX #language en-US "%H Entry[%d]\n" 73#string STR_IFCONFIG_SHOW_IP_ADDR #language en-US "%12s: %N%d.%d.%d.%d\n" 74#string STR_IFCONFIG_INFO_NEWLINE #language en-US "\n" 75#string STR_IFCONFIG_INFO_DNS_ADDR_BODY #language en-US "%8d.%d.%d.%d\n" 76#string STR_IFCONFIG_INFO_BREAK #language en-US "\n-----------------------------------------------------------------\n" 77#string STR_IFCONFIG_INFO_COLON #language en-US ":" 78#string STR_IFCONFIG_INFO_IF_NAME #language en-US "\n%Hname : %s%N\n" 79#string STR_IFCONFIG_INFO_MEDIA_STATE #language en-US "%HMedia State : %s%N\n" 80#string STR_IFCONFIG_INFO_POLICY_DHCP #language en-US "%Hpolicy : dhcp%N\n" 81#string STR_IFCONFIG_INFO_POLICY_MAN #language en-US "%Hpolicy : static%N\n" 82#string STR_IFCONFIG_INFO_MAC_ADDR_HEAD #language en-US "%Hmac addr : %N" 83#string STR_IFCONFIG_INFO_MAC_ADDR_BODY #language en-US "%02x" 84#string STR_IFCONFIG_INFO_IP_ADDR_HEAD #language en-US "\n%Hipv4 address : %N" 85#string STR_IFCONFIG_INFO_SUBNET_MASK_HEAD #language en-US "\n%Hsubnet mask : %N" 86#string STR_IFCONFIG_INFO_GATEWAY_HEAD #language en-US "\n%Hdefault gateway: %N" 87#string STR_IFCONFIG_INFO_DNS_ADDR_HEAD #language en-US "\n%HDNS server : %N\n" 88#string STR_IFCONFIG_INFO_IP_ADDR_BODY #language en-US "%d.%d.%d.%d\n" 89 90#string STR_GET_HELP_PING #language en-US "" 91".TH ping 0 "Pings the target host with an IPv4 or IPv6 stack."\r\n" 92".SH NAME\r\n" 93"Pings the target host with an IPv4 or IPv6 stack.\r\n" 94".SH SYNOPSIS\r\n" 95" \r\n" 96"PING [-_ip6] [-_s SourceIp] [-n count] [-l size] TargetIp\r\n" 97".SH OPTIONS\r\n" 98" \r\n" 99" -n - Specifies the number of echo request datagrams to be sent.\r\n" 100" -l - Specifies the size of the data buffer in the echo request datagram.\r\n" 101" -_ip6 - Specifies the IPv6 stack usage mode (Default is IPv4 stack).\r\n" 102" -_s - Specifies the source adapter as IPv4 or IPv6 address.\r\n" 103" SourceIp - Specifies the IPv4 or IPv6 address of the source machine.\r\n" 104" TargetIp - Specifies the IPv4 or IPv6 address of the target machine.\r\n" 105".SH DESCRIPTION\r\n" 106" \r\n" 107"NOTES:\r\n" 108" 1. This command uses the ICMPv4 or ICMPv6 ECHO_REQUEST datagram to elicit an\r\n" 109" ECHO_REPLY from a host.\r\n" 110".SH EXAMPLES\r\n" 111" \r\n" 112"EXAMPLES:\r\n" 113" * To ping the target host with 64 bytes data:\r\n" 114" fs0:\> ping -l 64 192.168.0.1\r\n" 115" \r\n" 116" * To ping the target host by sending 20 echo request datagrams:\r\n" 117" fs0:\> ping -n 20 202.120.100.1\r\n" 118" \r\n" 119" * To ping the target host by specifying the source adapter as IPv4 address:\r\n" 120" fs0:\> ping -_s 202.120.100.12 202.120.100.1\r\n" 121" \r\n" 122" * To ping the target host by specifying the IPv6 stack usage mode:\r\n" 123" fs0:\> ping -_ip6 2000:bbbb::8\r\n" 124".SH RETURNVALUES\r\n" 125" \r\n" 126"RETURN VALUES:\r\n" 127" SHELL_SUCCESS The action was completed as requested.\r\n" 128" SHELL_INVALID_PARAMETER One of the passed-in parameters was incorrectly\r\n" 129" formatted or its value was out of bounds.\r\n" 130 131#string STR_GET_HELP_IFCONFIG #language en-US "" 132".TH ifconfig 0 "Modifies the default IP address of the UEFI IPv4 Network Stack."\r\n" 133".SH NAME\r\n" 134"Modifies the default IP address of the UEFI IPv4 Network Stack.\r\n" 135".SH SYNOPSIS\r\n" 136" \r\n" 137"IFCONFIG [-r [Name]] [-l [Name]]\r\n" 138"IFCONFIG [-s <Name> dhcp | <static <IP> <Mask> <Gateway>> | <dns <IP>>]\r\n" 139".SH OPTIONS\r\n" 140" \r\n" 141" -r - Renew configuration of interface and set dhcp policy.\r\n" 142" -l - Lists the configuration.\r\n" 143" -s - Sets the configuration.\r\n" 144" Name - Specifies an adapter name (for example, eth0).\r\n" 145" IP - Specifies the IPv4 address in four integer values:\r\n" 146" - Example: 192.168.0.10\r\n" 147" SubnetMask - Specifies a subnet mask in four integer values:\r\n" 148" - Example: 255.255.255.0\r\n" 149" GatewayMask - Specifies a default gateway in four integer values:\r\n" 150" - Example: 192.168.0.1\r\n" 151".SH DESCRIPTION\r\n" 152" \r\n" 153"NOTES:\r\n" 154" 1. This command modifies the default IP address for the UEFI IP4\r\n" 155" network stack.\r\n" 156" 2. Use '-r' to renew configuration of interface and set dhcp policy.\r\n" 157" 3. Use '-l' to list the DNS and other address related settings for all\r\n" 158" interfaces or the specified interface.\r\n" 159" 4. Use '-s <Name> static <IP> <SubnetMask> <GatewayMask>' with \r\n" 160" static IP4 address configuration for specified interface.\r\n" 161" 5. Use '-s <Name> dhcp' for DHCP4 to request the IP4 address\r\n" 162" configuration dynamically for specified interface.\r\n" 163" 6. Use '-s <Name> dns <IP>' must under manual policy.\r\n" 164".SH EXAMPLES\r\n" 165" \r\n" 166"EXAMPLES:\r\n" 167" * To list the configuration for the eth0 interface:\r\n" 168" fs0:\> ifconfig -l eth0\r\n" 169" \r\n" 170" * To use DHCP4 to request the IPv4 address configuration dynamically for the\r\n" 171" eth0 interface:\r\n" 172" fs0:\> ifconfig -s eth0 dhcp\r\n" 173" \r\n" 174" * To use the static IPv4 address configuration for the eth0 interface:\r\n" 175" fs0:\> ifconfig -s eth0 static 192.168.0.5 255.255.255.0 192.168.0.1\r\n" 176" \r\n" 177" * To configure DNS server address for the eth0 interface:\r\n" 178" fs0:\> ifconfig -s eth0 dns 192.168.0.8 192.168.0.9\r\n" 179 180 181 182