• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1# Makefile.in generated by automake 1.14.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
19am__make_running_with_option = \
20  case $${target_option-} in \
21      ?) ;; \
22      *) echo "am__make_running_with_option: internal error: invalid" \
23              "target option '$${target_option-}' specified" >&2; \
24         exit 1;; \
25  esac; \
26  has_opt=no; \
27  sane_makeflags=$$MAKEFLAGS; \
28  if $(am__is_gnu_make); then \
29    sane_makeflags=$$MFLAGS; \
30  else \
31    case $$MAKEFLAGS in \
32      *\\[\ \	]*) \
33        bs=\\; \
34        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
35          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
36    esac; \
37  fi; \
38  skip_next=no; \
39  strip_trailopt () \
40  { \
41    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
42  }; \
43  for flg in $$sane_makeflags; do \
44    test $$skip_next = yes && { skip_next=no; continue; }; \
45    case $$flg in \
46      *=*|--*) continue;; \
47        -*I) strip_trailopt 'I'; skip_next=yes;; \
48      -*I?*) strip_trailopt 'I';; \
49        -*O) strip_trailopt 'O'; skip_next=yes;; \
50      -*O?*) strip_trailopt 'O';; \
51        -*l) strip_trailopt 'l'; skip_next=yes;; \
52      -*l?*) strip_trailopt 'l';; \
53      -[dEDm]) skip_next=yes;; \
54      -[JT]) skip_next=yes;; \
55    esac; \
56    case $$flg in \
57      *$$target_option*) has_opt=yes; break;; \
58    esac; \
59  done; \
60  test $$has_opt = yes
61am__make_dryrun = (target_option=n; $(am__make_running_with_option))
62am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
63pkgdatadir = $(datadir)/@PACKAGE@
64pkgincludedir = $(includedir)/@PACKAGE@
65pkglibdir = $(libdir)/@PACKAGE@
66pkglibexecdir = $(libexecdir)/@PACKAGE@
67am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
68install_sh_DATA = $(install_sh) -c -m 644
69install_sh_PROGRAM = $(install_sh) -c
70install_sh_SCRIPT = $(install_sh) -c
71INSTALL_HEADER = $(INSTALL_DATA)
72transform = $(program_transform_name)
73NORMAL_INSTALL = :
74PRE_INSTALL = :
75POST_INSTALL = :
76NORMAL_UNINSTALL = :
77PRE_UNINSTALL = :
78POST_UNINSTALL = :
79build_triplet = @build@
80host_triplet = @host@
81@BUILD_DOC_TRUE@am__append_1 = doc
82subdir = .
83DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
84	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
85	$(top_srcdir)/configure $(am__configure_deps) \
86	$(srcdir)/MHD_config.h.in $(srcdir)/libmicrohttpd.pc.in \
87	$(srcdir)/libmicrospdy.pc.in \
88	$(top_srcdir)/w32/VS2013/microhttpd_dll_res_vc.rc.in COPYING \
89	compile config.guess config.sub depcomp install-sh missing \
90	ltmain.sh
91ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
92am__aclocal_m4_deps = $(top_srcdir)/m4/ax_append_compile_flags.m4 \
93	$(top_srcdir)/m4/ax_append_flag.m4 \
94	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
95	$(top_srcdir)/m4/ax_check_link_flag.m4 \
96	$(top_srcdir)/m4/ax_check_openssl.m4 \
97	$(top_srcdir)/m4/ax_count_cpus.m4 \
98	$(top_srcdir)/m4/ax_have_epoll.m4 \
99	$(top_srcdir)/m4/ax_pthread.m4 \
100	$(top_srcdir)/m4/ax_require_defined.m4 \
101	$(top_srcdir)/m4/libcurl.m4 $(top_srcdir)/m4/libgcrypt.m4 \
102	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
103	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
104	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
105	$(top_srcdir)/configure.ac
106am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
107	$(ACLOCAL_M4)
108am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
109 configure.lineno config.status.lineno
110mkinstalldirs = $(install_sh) -d
111CONFIG_HEADER = MHD_config.h
112CONFIG_CLEAN_FILES = libmicrohttpd.pc libmicrospdy.pc \
113	w32/VS2013/microhttpd_dll_res_vc.rc
114CONFIG_CLEAN_VPATH_FILES =
115AM_V_P = $(am__v_P_@AM_V@)
116am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
117am__v_P_0 = false
118am__v_P_1 = :
119AM_V_GEN = $(am__v_GEN_@AM_V@)
120am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
121am__v_GEN_0 = @echo "  GEN     " $@;
122am__v_GEN_1 =
123AM_V_at = $(am__v_at_@AM_V@)
124am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
125am__v_at_0 = @
126am__v_at_1 =
127SOURCES =
128DIST_SOURCES =
129RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
130	ctags-recursive dvi-recursive html-recursive info-recursive \
131	install-data-recursive install-dvi-recursive \
132	install-exec-recursive install-html-recursive \
133	install-info-recursive install-pdf-recursive \
134	install-ps-recursive install-recursive installcheck-recursive \
135	installdirs-recursive pdf-recursive ps-recursive \
136	tags-recursive uninstall-recursive
137am__can_run_installinfo = \
138  case $$AM_UPDATE_INFO_DIR in \
139    n|no|NO) false;; \
140    *) (install-info --version) >/dev/null 2>&1;; \
141  esac
142am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
143am__vpath_adj = case $$p in \
144    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
145    *) f=$$p;; \
146  esac;
147am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
148am__install_max = 40
149am__nobase_strip_setup = \
150  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
151am__nobase_strip = \
152  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
153am__nobase_list = $(am__nobase_strip_setup); \
154  for p in $$list; do echo "$$p $$p"; done | \
155  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
156  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
157    if (++n[$$2] == $(am__install_max)) \
158      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
159    END { for (dir in files) print dir, files[dir] }'
160am__base_list = \
161  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
162  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
163am__uninstall_files_from_dir = { \
164  test -z "$$files" \
165    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
166    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
167         $(am__cd) "$$dir" && rm -f $$files; }; \
168  }
169am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
170DATA = $(pkgconfig_DATA)
171RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
172  distclean-recursive maintainer-clean-recursive
173am__recursive_targets = \
174  $(RECURSIVE_TARGETS) \
175  $(RECURSIVE_CLEAN_TARGETS) \
176  $(am__extra_recursive_targets)
177AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
178	cscope distdir dist dist-all distcheck
179am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
180	$(LISP)MHD_config.h.in
181# Read a list of newline-separated strings from the standard input,
182# and print each of them once, without duplicates.  Input order is
183# *not* preserved.
184am__uniquify_input = $(AWK) '\
185  BEGIN { nonempty = 0; } \
186  { items[$$0] = 1; nonempty = 1; } \
187  END { if (nonempty) { for (i in items) print i; }; } \
188'
189# Make sure the list of sources is unique.  This is necessary because,
190# e.g., the same source file might be shared among _SOURCES variables
191# for different programs/libraries.
192am__define_uniq_tagged_files = \
193  list='$(am__tagged_files)'; \
194  unique=`for i in $$list; do \
195    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
196  done | $(am__uniquify_input)`
197ETAGS = etags
198CTAGS = ctags
199CSCOPE = cscope
200DIST_SUBDIRS = contrib src m4 . doc
201DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
202distdir = $(PACKAGE)-$(VERSION)
203top_distdir = $(distdir)
204am__remove_distdir = \
205  if test -d "$(distdir)"; then \
206    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
207      && rm -rf "$(distdir)" \
208      || { sleep 5 && rm -rf "$(distdir)"; }; \
209  else :; fi
210am__post_remove_distdir = $(am__remove_distdir)
211am__relativize = \
212  dir0=`pwd`; \
213  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
214  sed_rest='s,^[^/]*/*,,'; \
215  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
216  sed_butlast='s,/*[^/]*$$,,'; \
217  while test -n "$$dir1"; do \
218    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
219    if test "$$first" != "."; then \
220      if test "$$first" = ".."; then \
221        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
222        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
223      else \
224        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
225        if test "$$first2" = "$$first"; then \
226          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
227        else \
228          dir2="../$$dir2"; \
229        fi; \
230        dir0="$$dir0"/"$$first"; \
231      fi; \
232    fi; \
233    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
234  done; \
235  reldir="$$dir2"
236DIST_ARCHIVES = $(distdir).tar.gz
237GZIP_ENV = --best
238DIST_TARGETS = dist-gzip
239distuninstallcheck_listfiles = find . -type f -print
240am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
241  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
242distcleancheck_listfiles = find . -type f -print
243ACLOCAL = @ACLOCAL@
244AMTAR = @AMTAR@
245AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
246AR = @AR@
247AS = @AS@
248AUTOCONF = @AUTOCONF@
249AUTOHEADER = @AUTOHEADER@
250AUTOMAKE = @AUTOMAKE@
251AWK = @AWK@
252CC = @CC@
253CCDEPMODE = @CCDEPMODE@
254CFLAGS = @CFLAGS@
255CPP = @CPP@
256CPPFLAGS = @CPPFLAGS@
257CPU_COUNT = @CPU_COUNT@
258CYGPATH_W = @CYGPATH_W@
259DEFS = @DEFS@
260DEPDIR = @DEPDIR@
261DLLTOOL = @DLLTOOL@
262DSYMUTIL = @DSYMUTIL@
263DUMPBIN = @DUMPBIN@
264ECHO_C = @ECHO_C@
265ECHO_N = @ECHO_N@
266ECHO_T = @ECHO_T@
267EGREP = @EGREP@
268EXEEXT = @EXEEXT@
269FGREP = @FGREP@
270GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
271GNUTLS_CPPFLAGS = @GNUTLS_CPPFLAGS@
272GNUTLS_LDFLAGS = @GNUTLS_LDFLAGS@
273GNUTLS_LIBS = @GNUTLS_LIBS@
274GREP = @GREP@
275HAVE_CURL_BINARY = @HAVE_CURL_BINARY@
276HAVE_MAKEINFO_BINARY = @HAVE_MAKEINFO_BINARY@
277HIDDEN_VISIBILITY_CFLAGS = @HIDDEN_VISIBILITY_CFLAGS@
278INSTALL = @INSTALL@
279INSTALL_DATA = @INSTALL_DATA@
280INSTALL_PROGRAM = @INSTALL_PROGRAM@
281INSTALL_SCRIPT = @INSTALL_SCRIPT@
282INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
283LD = @LD@
284LDFLAGS = @LDFLAGS@
285LIBCURL = @LIBCURL@
286LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
287LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
288LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
289LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
290LIBOBJS = @LIBOBJS@
291LIBS = @LIBS@
292LIBSPDY_VERSION_AGE = @LIBSPDY_VERSION_AGE@
293LIBSPDY_VERSION_CURRENT = @LIBSPDY_VERSION_CURRENT@
294LIBSPDY_VERSION_REVISION = @LIBSPDY_VERSION_REVISION@
295LIBTOOL = @LIBTOOL@
296LIB_VERSION_AGE = @LIB_VERSION_AGE@
297LIB_VERSION_CURRENT = @LIB_VERSION_CURRENT@
298LIB_VERSION_REVISION = @LIB_VERSION_REVISION@
299LIPO = @LIPO@
300LN_S = @LN_S@
301LTLIBOBJS = @LTLIBOBJS@
302MAKEINFO = @MAKEINFO@
303MANIFEST_TOOL = @MANIFEST_TOOL@
304MHD_LIBDEPS = @MHD_LIBDEPS@
305MHD_LIBDEPS_PKGCFG = @MHD_LIBDEPS_PKGCFG@
306MHD_LIB_CFLAGS = @MHD_LIB_CFLAGS@
307MHD_LIB_CPPFLAGS = @MHD_LIB_CPPFLAGS@
308MHD_LIB_LDFLAGS = @MHD_LIB_LDFLAGS@
309MHD_REQ_PRIVATE = @MHD_REQ_PRIVATE@
310MKDIR_P = @MKDIR_P@
311MS_LIB_TOOL = @MS_LIB_TOOL@
312NM = @NM@
313NMEDIT = @NMEDIT@
314OBJDUMP = @OBJDUMP@
315OBJEXT = @OBJEXT@
316OPENSSL_INCLUDES = @OPENSSL_INCLUDES@
317OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@
318OPENSSL_LIBS = @OPENSSL_LIBS@
319OTOOL = @OTOOL@
320OTOOL64 = @OTOOL64@
321PACKAGE = @PACKAGE@
322PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
323PACKAGE_NAME = @PACKAGE_NAME@
324PACKAGE_STRING = @PACKAGE_STRING@
325PACKAGE_TARNAME = @PACKAGE_TARNAME@
326PACKAGE_URL = @PACKAGE_URL@
327PACKAGE_VERSION = @PACKAGE_VERSION@
328PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@
329PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@
330PACKAGE_VERSION_SUBMINOR = @PACKAGE_VERSION_SUBMINOR@
331PATH_SEPARATOR = @PATH_SEPARATOR@
332PKG_CONFIG = @PKG_CONFIG@
333PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
334PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
335PTHREAD_CC = @PTHREAD_CC@
336PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
337PTHREAD_LIBS = @PTHREAD_LIBS@
338RANLIB = @RANLIB@
339RC = @RC@
340SED = @SED@
341SET_MAKE = @SET_MAKE@
342SHELL = @SHELL@
343SPDY_LIBDEPS = @SPDY_LIBDEPS@
344SPDY_LIB_CFLAGS = @SPDY_LIB_CFLAGS@
345SPDY_LIB_CPPFLAGS = @SPDY_LIB_CPPFLAGS@
346SPDY_LIB_LDFLAGS = @SPDY_LIB_LDFLAGS@
347STRIP = @STRIP@
348VERSION = @VERSION@
349_libcurl_config = @_libcurl_config@
350abs_builddir = @abs_builddir@
351abs_srcdir = @abs_srcdir@
352abs_top_builddir = @abs_top_builddir@
353abs_top_srcdir = @abs_top_srcdir@
354ac_ct_AR = @ac_ct_AR@
355ac_ct_CC = @ac_ct_CC@
356ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
357am__include = @am__include@
358am__leading_dot = @am__leading_dot@
359am__quote = @am__quote@
360am__tar = @am__tar@
361am__untar = @am__untar@
362ax_pthread_config = @ax_pthread_config@
363bindir = @bindir@
364build = @build@
365build_alias = @build_alias@
366build_cpu = @build_cpu@
367build_os = @build_os@
368build_vendor = @build_vendor@
369builddir = @builddir@
370datadir = @datadir@
371datarootdir = @datarootdir@
372docdir = @docdir@
373dvidir = @dvidir@
374exec_prefix = @exec_prefix@
375have_socat = @have_socat@
376have_zzuf = @have_zzuf@
377host = @host@
378host_alias = @host_alias@
379host_cpu = @host_cpu@
380host_os = @host_os@
381host_vendor = @host_vendor@
382htmldir = @htmldir@
383includedir = @includedir@
384infodir = @infodir@
385install_sh = @install_sh@
386libdir = @libdir@
387libexecdir = @libexecdir@
388localedir = @localedir@
389localstatedir = @localstatedir@
390lt_cv_objdir = @lt_cv_objdir@
391mandir = @mandir@
392mkdir_p = @mkdir_p@
393oldincludedir = @oldincludedir@
394pdfdir = @pdfdir@
395prefix = @prefix@
396program_transform_name = @program_transform_name@
397psdir = @psdir@
398sbindir = @sbindir@
399sharedstatedir = @sharedstatedir@
400srcdir = @srcdir@
401sysconfdir = @sysconfdir@
402target_alias = @target_alias@
403top_build_prefix = @top_build_prefix@
404top_builddir = @top_builddir@
405top_srcdir = @top_srcdir@
406
407# This Makefile.am is in the public domain
408ACLOCAL_AMFLAGS = -I m4
409SUBDIRS = contrib src m4 . $(am__append_1)
410EXTRA_DIST = acinclude.m4 libmicrohttpd.pc.in libmicrospdy.pc.in  \
411  w32/VS2013/libmicrohttpd.sln w32/VS2013/libmicrohttpd.vcxproj w32/VS2013/libmicrohttpd.vcxproj.filters \
412  w32/VS2013/hellobrowser.vcxproj w32/VS2013/hellobrowser.vcxproj.filters w32/VS2013/MHD_config.h \
413  w32/VS2013/gen_dll_res.ps1 w32/VS2013/microhttpd_dll_res_vc.rc.in w32/VS2013/microhttpd_dll_res_vc.rc
414
415pkgconfigdir = $(libdir)/pkgconfig
416pkgconfig_DATA = libmicrohttpd.pc libmicrospdy.pc
417all: MHD_config.h
418	$(MAKE) $(AM_MAKEFLAGS) all-recursive
419
420.SUFFIXES:
421am--refresh: Makefile
422	@:
423$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
424	@for dep in $?; do \
425	  case '$(am__configure_deps)' in \
426	    *$$dep*) \
427	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
428	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
429		&& exit 0; \
430	      exit 1;; \
431	  esac; \
432	done; \
433	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
434	$(am__cd) $(top_srcdir) && \
435	  $(AUTOMAKE) --gnu Makefile
436.PRECIOUS: Makefile
437Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
438	@case '$?' in \
439	  *config.status*) \
440	    echo ' $(SHELL) ./config.status'; \
441	    $(SHELL) ./config.status;; \
442	  *) \
443	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
444	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
445	esac;
446
447$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
448	$(SHELL) ./config.status --recheck
449
450$(top_srcdir)/configure:  $(am__configure_deps)
451	$(am__cd) $(srcdir) && $(AUTOCONF)
452$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
453	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
454$(am__aclocal_m4_deps):
455
456MHD_config.h: stamp-h1
457	@test -f $@ || rm -f stamp-h1
458	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
459
460stamp-h1: $(srcdir)/MHD_config.h.in $(top_builddir)/config.status
461	@rm -f stamp-h1
462	cd $(top_builddir) && $(SHELL) ./config.status MHD_config.h
463$(srcdir)/MHD_config.h.in:  $(am__configure_deps)
464	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
465	rm -f stamp-h1
466	touch $@
467
468distclean-hdr:
469	-rm -f MHD_config.h stamp-h1
470libmicrohttpd.pc: $(top_builddir)/config.status $(srcdir)/libmicrohttpd.pc.in
471	cd $(top_builddir) && $(SHELL) ./config.status $@
472libmicrospdy.pc: $(top_builddir)/config.status $(srcdir)/libmicrospdy.pc.in
473	cd $(top_builddir) && $(SHELL) ./config.status $@
474w32/VS2013/microhttpd_dll_res_vc.rc: $(top_builddir)/config.status $(top_srcdir)/w32/VS2013/microhttpd_dll_res_vc.rc.in
475	cd $(top_builddir) && $(SHELL) ./config.status $@
476
477mostlyclean-libtool:
478	-rm -f *.lo
479
480clean-libtool:
481	-rm -rf .libs _libs
482
483distclean-libtool:
484	-rm -f libtool config.lt
485install-pkgconfigDATA: $(pkgconfig_DATA)
486	@$(NORMAL_INSTALL)
487	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
488	if test -n "$$list"; then \
489	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
490	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
491	fi; \
492	for p in $$list; do \
493	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
494	  echo "$$d$$p"; \
495	done | $(am__base_list) | \
496	while read files; do \
497	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
498	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
499	done
500
501uninstall-pkgconfigDATA:
502	@$(NORMAL_UNINSTALL)
503	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
504	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
505	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
506
507# This directory's subdirectories are mostly independent; you can cd
508# into them and run 'make' without going through this Makefile.
509# To change the values of 'make' variables: instead of editing Makefiles,
510# (1) if the variable is set in 'config.status', edit 'config.status'
511#     (which will cause the Makefiles to be regenerated when you run 'make');
512# (2) otherwise, pass the desired values on the 'make' command line.
513$(am__recursive_targets):
514	@fail=; \
515	if $(am__make_keepgoing); then \
516	  failcom='fail=yes'; \
517	else \
518	  failcom='exit 1'; \
519	fi; \
520	dot_seen=no; \
521	target=`echo $@ | sed s/-recursive//`; \
522	case "$@" in \
523	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
524	  *) list='$(SUBDIRS)' ;; \
525	esac; \
526	for subdir in $$list; do \
527	  echo "Making $$target in $$subdir"; \
528	  if test "$$subdir" = "."; then \
529	    dot_seen=yes; \
530	    local_target="$$target-am"; \
531	  else \
532	    local_target="$$target"; \
533	  fi; \
534	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
535	  || eval $$failcom; \
536	done; \
537	if test "$$dot_seen" = "no"; then \
538	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
539	fi; test -z "$$fail"
540
541ID: $(am__tagged_files)
542	$(am__define_uniq_tagged_files); mkid -fID $$unique
543tags: tags-recursive
544TAGS: tags
545
546tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
547	set x; \
548	here=`pwd`; \
549	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
550	  include_option=--etags-include; \
551	  empty_fix=.; \
552	else \
553	  include_option=--include; \
554	  empty_fix=; \
555	fi; \
556	list='$(SUBDIRS)'; for subdir in $$list; do \
557	  if test "$$subdir" = .; then :; else \
558	    test ! -f $$subdir/TAGS || \
559	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
560	  fi; \
561	done; \
562	$(am__define_uniq_tagged_files); \
563	shift; \
564	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
565	  test -n "$$unique" || unique=$$empty_fix; \
566	  if test $$# -gt 0; then \
567	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
568	      "$$@" $$unique; \
569	  else \
570	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
571	      $$unique; \
572	  fi; \
573	fi
574ctags: ctags-recursive
575
576CTAGS: ctags
577ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
578	$(am__define_uniq_tagged_files); \
579	test -z "$(CTAGS_ARGS)$$unique" \
580	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
581	     $$unique
582
583GTAGS:
584	here=`$(am__cd) $(top_builddir) && pwd` \
585	  && $(am__cd) $(top_srcdir) \
586	  && gtags -i $(GTAGS_ARGS) "$$here"
587cscope: cscope.files
588	test ! -s cscope.files \
589	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
590clean-cscope:
591	-rm -f cscope.files
592cscope.files: clean-cscope cscopelist
593cscopelist: cscopelist-recursive
594
595cscopelist-am: $(am__tagged_files)
596	list='$(am__tagged_files)'; \
597	case "$(srcdir)" in \
598	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
599	  *) sdir=$(subdir)/$(srcdir) ;; \
600	esac; \
601	for i in $$list; do \
602	  if test -f "$$i"; then \
603	    echo "$(subdir)/$$i"; \
604	  else \
605	    echo "$$sdir/$$i"; \
606	  fi; \
607	done >> $(top_builddir)/cscope.files
608
609distclean-tags:
610	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
611	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
612
613distdir: $(DISTFILES)
614	$(am__remove_distdir)
615	test -d "$(distdir)" || mkdir "$(distdir)"
616	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
617	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
618	list='$(DISTFILES)'; \
619	  dist_files=`for file in $$list; do echo $$file; done | \
620	  sed -e "s|^$$srcdirstrip/||;t" \
621	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
622	case $$dist_files in \
623	  */*) $(MKDIR_P) `echo "$$dist_files" | \
624			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
625			   sort -u` ;; \
626	esac; \
627	for file in $$dist_files; do \
628	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
629	  if test -d $$d/$$file; then \
630	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
631	    if test -d "$(distdir)/$$file"; then \
632	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
633	    fi; \
634	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
635	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
636	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
637	    fi; \
638	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
639	  else \
640	    test -f "$(distdir)/$$file" \
641	    || cp -p $$d/$$file "$(distdir)/$$file" \
642	    || exit 1; \
643	  fi; \
644	done
645	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
646	  if test "$$subdir" = .; then :; else \
647	    $(am__make_dryrun) \
648	      || test -d "$(distdir)/$$subdir" \
649	      || $(MKDIR_P) "$(distdir)/$$subdir" \
650	      || exit 1; \
651	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
652	    $(am__relativize); \
653	    new_distdir=$$reldir; \
654	    dir1=$$subdir; dir2="$(top_distdir)"; \
655	    $(am__relativize); \
656	    new_top_distdir=$$reldir; \
657	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
658	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
659	    ($(am__cd) $$subdir && \
660	      $(MAKE) $(AM_MAKEFLAGS) \
661	        top_distdir="$$new_top_distdir" \
662	        distdir="$$new_distdir" \
663		am__remove_distdir=: \
664		am__skip_length_check=: \
665		am__skip_mode_fix=: \
666	        distdir) \
667	      || exit 1; \
668	  fi; \
669	done
670	-test -n "$(am__skip_mode_fix)" \
671	|| find "$(distdir)" -type d ! -perm -755 \
672		-exec chmod u+rwx,go+rx {} \; -o \
673	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
674	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
675	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
676	|| chmod -R a+r "$(distdir)"
677dist-gzip: distdir
678	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
679	$(am__post_remove_distdir)
680
681dist-bzip2: distdir
682	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
683	$(am__post_remove_distdir)
684
685dist-lzip: distdir
686	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
687	$(am__post_remove_distdir)
688
689dist-xz: distdir
690	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
691	$(am__post_remove_distdir)
692
693dist-tarZ: distdir
694	@echo WARNING: "Support for shar distribution archives is" \
695	               "deprecated." >&2
696	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
697	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
698	$(am__post_remove_distdir)
699
700dist-shar: distdir
701	@echo WARNING: "Support for distribution archives compressed with" \
702		       "legacy program 'compress' is deprecated." >&2
703	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
704	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
705	$(am__post_remove_distdir)
706
707dist-zip: distdir
708	-rm -f $(distdir).zip
709	zip -rq $(distdir).zip $(distdir)
710	$(am__post_remove_distdir)
711
712dist dist-all:
713	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
714	$(am__post_remove_distdir)
715
716# This target untars the dist file and tries a VPATH configuration.  Then
717# it guarantees that the distribution is self-contained by making another
718# tarfile.
719distcheck: dist
720	case '$(DIST_ARCHIVES)' in \
721	*.tar.gz*) \
722	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
723	*.tar.bz2*) \
724	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
725	*.tar.lz*) \
726	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
727	*.tar.xz*) \
728	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
729	*.tar.Z*) \
730	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
731	*.shar.gz*) \
732	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
733	*.zip*) \
734	  unzip $(distdir).zip ;;\
735	esac
736	chmod -R a-w $(distdir)
737	chmod u+w $(distdir)
738	mkdir $(distdir)/_build $(distdir)/_inst
739	chmod a-w $(distdir)
740	test -d $(distdir)/_build || exit 0; \
741	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
742	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
743	  && am__cwd=`pwd` \
744	  && $(am__cd) $(distdir)/_build \
745	  && ../configure \
746	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
747	    $(DISTCHECK_CONFIGURE_FLAGS) \
748	    --srcdir=.. --prefix="$$dc_install_base" \
749	  && $(MAKE) $(AM_MAKEFLAGS) \
750	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
751	  && $(MAKE) $(AM_MAKEFLAGS) check \
752	  && $(MAKE) $(AM_MAKEFLAGS) install \
753	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
754	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
755	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
756	        distuninstallcheck \
757	  && chmod -R a-w "$$dc_install_base" \
758	  && ({ \
759	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
760	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
761	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
762	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
763	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
764	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
765	  && rm -rf "$$dc_destdir" \
766	  && $(MAKE) $(AM_MAKEFLAGS) dist \
767	  && rm -rf $(DIST_ARCHIVES) \
768	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
769	  && cd "$$am__cwd" \
770	  || exit 1
771	$(am__post_remove_distdir)
772	@(echo "$(distdir) archives ready for distribution: "; \
773	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
774	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
775distuninstallcheck:
776	@test -n '$(distuninstallcheck_dir)' || { \
777	  echo 'ERROR: trying to run $@ with an empty' \
778	       '$$(distuninstallcheck_dir)' >&2; \
779	  exit 1; \
780	}; \
781	$(am__cd) '$(distuninstallcheck_dir)' || { \
782	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
783	  exit 1; \
784	}; \
785	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
786	   || { echo "ERROR: files left after uninstall:" ; \
787	        if test -n "$(DESTDIR)"; then \
788	          echo "  (check DESTDIR support)"; \
789	        fi ; \
790	        $(distuninstallcheck_listfiles) ; \
791	        exit 1; } >&2
792distcleancheck: distclean
793	@if test '$(srcdir)' = . ; then \
794	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
795	  exit 1 ; \
796	fi
797	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
798	  || { echo "ERROR: files left in build directory after distclean:" ; \
799	       $(distcleancheck_listfiles) ; \
800	       exit 1; } >&2
801check-am: all-am
802check: check-recursive
803all-am: Makefile $(DATA) MHD_config.h
804installdirs: installdirs-recursive
805installdirs-am:
806	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
807	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
808	done
809install: install-recursive
810install-exec: install-exec-recursive
811install-data: install-data-recursive
812uninstall: uninstall-recursive
813
814install-am: all-am
815	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
816
817installcheck: installcheck-recursive
818install-strip:
819	if test -z '$(STRIP)'; then \
820	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
821	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
822	      install; \
823	else \
824	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
825	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
826	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
827	fi
828mostlyclean-generic:
829
830clean-generic:
831
832distclean-generic:
833	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
834	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
835
836maintainer-clean-generic:
837	@echo "This command is intended for maintainers to use"
838	@echo "it deletes files that may require special tools to rebuild."
839clean: clean-recursive
840
841clean-am: clean-generic clean-libtool mostlyclean-am
842
843distclean: distclean-recursive
844	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
845	-rm -f Makefile
846distclean-am: clean-am distclean-generic distclean-hdr \
847	distclean-libtool distclean-tags
848
849dvi: dvi-recursive
850
851dvi-am:
852
853html: html-recursive
854
855html-am:
856
857info: info-recursive
858
859info-am:
860
861install-data-am: install-pkgconfigDATA
862
863install-dvi: install-dvi-recursive
864
865install-dvi-am:
866
867install-exec-am:
868
869install-html: install-html-recursive
870
871install-html-am:
872
873install-info: install-info-recursive
874
875install-info-am:
876
877install-man:
878
879install-pdf: install-pdf-recursive
880
881install-pdf-am:
882
883install-ps: install-ps-recursive
884
885install-ps-am:
886
887installcheck-am:
888
889maintainer-clean: maintainer-clean-recursive
890	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
891	-rm -rf $(top_srcdir)/autom4te.cache
892	-rm -f Makefile
893maintainer-clean-am: distclean-am maintainer-clean-generic
894
895mostlyclean: mostlyclean-recursive
896
897mostlyclean-am: mostlyclean-generic mostlyclean-libtool
898
899pdf: pdf-recursive
900
901pdf-am:
902
903ps: ps-recursive
904
905ps-am:
906
907uninstall-am: uninstall-pkgconfigDATA
908
909.MAKE: $(am__recursive_targets) all install-am install-strip
910
911.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
912	am--refresh check check-am clean clean-cscope clean-generic \
913	clean-libtool cscope cscopelist-am ctags ctags-am dist \
914	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
915	dist-xz dist-zip distcheck distclean distclean-generic \
916	distclean-hdr distclean-libtool distclean-tags distcleancheck \
917	distdir distuninstallcheck dvi dvi-am html html-am info \
918	info-am install install-am install-data install-data-am \
919	install-dvi install-dvi-am install-exec install-exec-am \
920	install-html install-html-am install-info install-info-am \
921	install-man install-pdf install-pdf-am install-pkgconfigDATA \
922	install-ps install-ps-am install-strip installcheck \
923	installcheck-am installdirs installdirs-am maintainer-clean \
924	maintainer-clean-generic mostlyclean mostlyclean-generic \
925	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
926	uninstall-am uninstall-pkgconfigDATA
927
928
929# Tell versions [3.59,3.63) of GNU make to not export all variables.
930# Otherwise a system limit (for SysV at least) may be exceeded.
931.NOEXPORT:
932