• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1# Makefile.in generated by automake 1.9.6 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005  Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17srcdir = @srcdir@
18top_srcdir = @top_srcdir@
19VPATH = @srcdir@
20pkgdatadir = $(datadir)/@PACKAGE@
21pkglibdir = $(libdir)/@PACKAGE@
22pkgincludedir = $(includedir)/@PACKAGE@
23top_builddir = ..
24am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
25INSTALL = @INSTALL@
26install_sh_DATA = $(install_sh) -c -m 644
27install_sh_PROGRAM = $(install_sh) -c
28install_sh_SCRIPT = $(install_sh) -c
29INSTALL_HEADER = $(INSTALL_DATA)
30transform = $(program_transform_name)
31NORMAL_INSTALL = :
32PRE_INSTALL = :
33POST_INSTALL = :
34NORMAL_UNINSTALL = :
35PRE_UNINSTALL = :
36POST_UNINSTALL = :
37build_triplet = @build@
38host_triplet = @host@
39subdir = doc
40DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
41ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42am__aclocal_m4_deps = $(top_srcdir)/configure.in
43am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
44	$(ACLOCAL_M4)
45mkinstalldirs = $(install_sh) -d
46CONFIG_HEADER = $(top_builddir)/config.h
47CONFIG_CLEAN_FILES =
48SOURCES =
49DIST_SOURCES =
50RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
51	html-recursive info-recursive install-data-recursive \
52	install-exec-recursive install-info-recursive \
53	install-recursive installcheck-recursive installdirs-recursive \
54	pdf-recursive ps-recursive uninstall-info-recursive \
55	uninstall-recursive
56am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
57am__vpath_adj = case $$p in \
58    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
59    *) f=$$p;; \
60  esac;
61am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
62am__installdirs = "$(DESTDIR)$(docdir)"
63docDATA_INSTALL = $(INSTALL_DATA)
64DATA = $(doc_DATA)
65ETAGS = etags
66CTAGS = ctags
67DIST_SUBDIRS = $(SUBDIRS)
68DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
69ACLOCAL = @ACLOCAL@
70AMDEP_FALSE = @AMDEP_FALSE@
71AMDEP_TRUE = @AMDEP_TRUE@
72AMTAR = @AMTAR@
73AR = @AR@
74AUTOCONF = @AUTOCONF@
75AUTOHEADER = @AUTOHEADER@
76AUTOMAKE = @AUTOMAKE@
77AWK = @AWK@
78CC = @CC@
79CCDEPMODE = @CCDEPMODE@
80CFLAGS = @CFLAGS@
81CPP = @CPP@
82CPPFLAGS = @CPPFLAGS@
83CYGPATH_W = @CYGPATH_W@
84DEBUG = @DEBUG@
85DEFS = @DEFS@
86DEPDIR = @DEPDIR@
87DSYMUTIL = @DSYMUTIL@
88DUMPBIN = @DUMPBIN@
89ECHO_C = @ECHO_C@
90ECHO_N = @ECHO_N@
91ECHO_T = @ECHO_T@
92EGREP = @EGREP@
93EXEEXT = @EXEEXT@
94FGREP = @FGREP@
95GREP = @GREP@
96INSTALL_DATA = @INSTALL_DATA@
97INSTALL_PROGRAM = @INSTALL_PROGRAM@
98INSTALL_SCRIPT = @INSTALL_SCRIPT@
99INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
100LD = @LD@
101LDFLAGS = @LDFLAGS@
102LIBOBJS = @LIBOBJS@
103LIBS = @LIBS@
104LIBTOOL = @LIBTOOL@
105LIBTOOL_DEPS = @LIBTOOL_DEPS@
106LIB_AGE = @LIB_AGE@
107LIB_CURRENT = @LIB_CURRENT@
108LIB_REVISION = @LIB_REVISION@
109LIPO = @LIPO@
110LN_S = @LN_S@
111LTLIBOBJS = @LTLIBOBJS@
112MAINT = @MAINT@
113MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
114MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
115MAKEINFO = @MAKEINFO@
116NM = @NM@
117NMEDIT = @NMEDIT@
118OBJDUMP = @OBJDUMP@
119OBJEXT = @OBJEXT@
120OPT = @OPT@
121OTOOL = @OTOOL@
122OTOOL64 = @OTOOL64@
123PACKAGE = @PACKAGE@
124PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
125PACKAGE_NAME = @PACKAGE_NAME@
126PACKAGE_STRING = @PACKAGE_STRING@
127PACKAGE_TARNAME = @PACKAGE_TARNAME@
128PACKAGE_VERSION = @PACKAGE_VERSION@
129PATH_SEPARATOR = @PATH_SEPARATOR@
130PROFILE = @PROFILE@
131RANLIB = @RANLIB@
132SED = @SED@
133SET_MAKE = @SET_MAKE@
134SHELL = @SHELL@
135SIZE16 = @SIZE16@
136SIZE32 = @SIZE32@
137SIZE64 = @SIZE64@
138STRIP = @STRIP@
139USIZE16 = @USIZE16@
140USIZE32 = @USIZE32@
141VERSION = @VERSION@
142ac_ct_CC = @ac_ct_CC@
143ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
144am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
145am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
146am__include = @am__include@
147am__leading_dot = @am__leading_dot@
148am__quote = @am__quote@
149am__tar = @am__tar@
150am__untar = @am__untar@
151bindir = @bindir@
152build = @build@
153build_alias = @build_alias@
154build_cpu = @build_cpu@
155build_os = @build_os@
156build_vendor = @build_vendor@
157datadir = @datadir@
158datarootdir = @datarootdir@
159docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)
160dvidir = @dvidir@
161exec_prefix = @exec_prefix@
162host = @host@
163host_alias = @host_alias@
164host_cpu = @host_cpu@
165host_os = @host_os@
166host_vendor = @host_vendor@
167htmldir = @htmldir@
168includedir = @includedir@
169infodir = @infodir@
170install_sh = @install_sh@
171libdir = @libdir@
172libexecdir = @libexecdir@
173localedir = @localedir@
174localstatedir = @localstatedir@
175lt_ECHO = @lt_ECHO@
176mandir = @mandir@
177mkdir_p = @mkdir_p@
178oldincludedir = @oldincludedir@
179pdfdir = @pdfdir@
180prefix = @prefix@
181program_transform_name = @program_transform_name@
182psdir = @psdir@
183sbindir = @sbindir@
184sharedstatedir = @sharedstatedir@
185sysconfdir = @sysconfdir@
186target_alias = @target_alias@
187SUBDIRS = libogg
188doc_DATA = framing.html index.html oggstream.html ogg-multiplex.html \
189	stream.png vorbisword2.png white-ogg.png white-xifish.png \
190	rfc3533.txt rfc5334.txt skeleton.html
191
192EXTRA_DIST = $(doc_DATA)
193all: all-recursive
194
195.SUFFIXES:
196$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
197	@for dep in $?; do \
198	  case '$(am__configure_deps)' in \
199	    *$$dep*) \
200	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
201		&& exit 0; \
202	      exit 1;; \
203	  esac; \
204	done; \
205	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
206	cd $(top_srcdir) && \
207	  $(AUTOMAKE) --gnu  doc/Makefile
208.PRECIOUS: Makefile
209Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
210	@case '$?' in \
211	  *config.status*) \
212	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
213	  *) \
214	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
215	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
216	esac;
217
218$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
219	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
220
221$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
222	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
223$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
224	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
225
226mostlyclean-libtool:
227	-rm -f *.lo
228
229clean-libtool:
230	-rm -rf .libs _libs
231
232distclean-libtool:
233	-rm -f libtool
234uninstall-info-am:
235install-docDATA: $(doc_DATA)
236	@$(NORMAL_INSTALL)
237	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
238	@list='$(doc_DATA)'; for p in $$list; do \
239	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
240	  f=$(am__strip_dir) \
241	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
242	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
243	done
244
245uninstall-docDATA:
246	@$(NORMAL_UNINSTALL)
247	@list='$(doc_DATA)'; for p in $$list; do \
248	  f=$(am__strip_dir) \
249	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
250	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
251	done
252
253# This directory's subdirectories are mostly independent; you can cd
254# into them and run `make' without going through this Makefile.
255# To change the values of `make' variables: instead of editing Makefiles,
256# (1) if the variable is set in `config.status', edit `config.status'
257#     (which will cause the Makefiles to be regenerated when you run `make');
258# (2) otherwise, pass the desired values on the `make' command line.
259$(RECURSIVE_TARGETS):
260	@failcom='exit 1'; \
261	for f in x $$MAKEFLAGS; do \
262	  case $$f in \
263	    *=* | --[!k]*);; \
264	    *k*) failcom='fail=yes';; \
265	  esac; \
266	done; \
267	dot_seen=no; \
268	target=`echo $@ | sed s/-recursive//`; \
269	list='$(SUBDIRS)'; for subdir in $$list; do \
270	  echo "Making $$target in $$subdir"; \
271	  if test "$$subdir" = "."; then \
272	    dot_seen=yes; \
273	    local_target="$$target-am"; \
274	  else \
275	    local_target="$$target"; \
276	  fi; \
277	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
278	  || eval $$failcom; \
279	done; \
280	if test "$$dot_seen" = "no"; then \
281	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
282	fi; test -z "$$fail"
283
284mostlyclean-recursive clean-recursive distclean-recursive \
285maintainer-clean-recursive:
286	@failcom='exit 1'; \
287	for f in x $$MAKEFLAGS; do \
288	  case $$f in \
289	    *=* | --[!k]*);; \
290	    *k*) failcom='fail=yes';; \
291	  esac; \
292	done; \
293	dot_seen=no; \
294	case "$@" in \
295	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
296	  *) list='$(SUBDIRS)' ;; \
297	esac; \
298	rev=''; for subdir in $$list; do \
299	  if test "$$subdir" = "."; then :; else \
300	    rev="$$subdir $$rev"; \
301	  fi; \
302	done; \
303	rev="$$rev ."; \
304	target=`echo $@ | sed s/-recursive//`; \
305	for subdir in $$rev; do \
306	  echo "Making $$target in $$subdir"; \
307	  if test "$$subdir" = "."; then \
308	    local_target="$$target-am"; \
309	  else \
310	    local_target="$$target"; \
311	  fi; \
312	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
313	  || eval $$failcom; \
314	done && test -z "$$fail"
315tags-recursive:
316	list='$(SUBDIRS)'; for subdir in $$list; do \
317	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
318	done
319ctags-recursive:
320	list='$(SUBDIRS)'; for subdir in $$list; do \
321	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
322	done
323
324ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
325	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
326	unique=`for i in $$list; do \
327	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
328	  done | \
329	  $(AWK) '    { files[$$0] = 1; } \
330	       END { for (i in files) print i; }'`; \
331	mkid -fID $$unique
332tags: TAGS
333
334TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
335		$(TAGS_FILES) $(LISP)
336	tags=; \
337	here=`pwd`; \
338	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
339	  include_option=--etags-include; \
340	  empty_fix=.; \
341	else \
342	  include_option=--include; \
343	  empty_fix=; \
344	fi; \
345	list='$(SUBDIRS)'; for subdir in $$list; do \
346	  if test "$$subdir" = .; then :; else \
347	    test ! -f $$subdir/TAGS || \
348	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
349	  fi; \
350	done; \
351	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
352	unique=`for i in $$list; do \
353	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
354	  done | \
355	  $(AWK) '    { files[$$0] = 1; } \
356	       END { for (i in files) print i; }'`; \
357	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
358	  test -n "$$unique" || unique=$$empty_fix; \
359	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
360	    $$tags $$unique; \
361	fi
362ctags: CTAGS
363CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
364		$(TAGS_FILES) $(LISP)
365	tags=; \
366	here=`pwd`; \
367	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
368	unique=`for i in $$list; do \
369	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
370	  done | \
371	  $(AWK) '    { files[$$0] = 1; } \
372	       END { for (i in files) print i; }'`; \
373	test -z "$(CTAGS_ARGS)$$tags$$unique" \
374	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
375	     $$tags $$unique
376
377GTAGS:
378	here=`$(am__cd) $(top_builddir) && pwd` \
379	  && cd $(top_srcdir) \
380	  && gtags -i $(GTAGS_ARGS) $$here
381
382distclean-tags:
383	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
384
385distdir: $(DISTFILES)
386	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
387	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
388	list='$(DISTFILES)'; for file in $$list; do \
389	  case $$file in \
390	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
391	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
392	  esac; \
393	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
394	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
395	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
396	    dir="/$$dir"; \
397	    $(mkdir_p) "$(distdir)$$dir"; \
398	  else \
399	    dir=''; \
400	  fi; \
401	  if test -d $$d/$$file; then \
402	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
403	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
404	    fi; \
405	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
406	  else \
407	    test -f $(distdir)/$$file \
408	    || cp -p $$d/$$file $(distdir)/$$file \
409	    || exit 1; \
410	  fi; \
411	done
412	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
413	  if test "$$subdir" = .; then :; else \
414	    test -d "$(distdir)/$$subdir" \
415	    || $(mkdir_p) "$(distdir)/$$subdir" \
416	    || exit 1; \
417	    distdir=`$(am__cd) $(distdir) && pwd`; \
418	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
419	    (cd $$subdir && \
420	      $(MAKE) $(AM_MAKEFLAGS) \
421	        top_distdir="$$top_distdir" \
422	        distdir="$$distdir/$$subdir" \
423	        distdir) \
424	      || exit 1; \
425	  fi; \
426	done
427check-am: all-am
428check: check-recursive
429all-am: Makefile $(DATA)
430installdirs: installdirs-recursive
431installdirs-am:
432	for dir in "$(DESTDIR)$(docdir)"; do \
433	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
434	done
435install: install-recursive
436install-exec: install-exec-recursive
437install-data: install-data-recursive
438uninstall: uninstall-recursive
439
440install-am: all-am
441	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
442
443installcheck: installcheck-recursive
444install-strip:
445	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
446	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
447	  `test -z '$(STRIP)' || \
448	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
449mostlyclean-generic:
450
451clean-generic:
452
453distclean-generic:
454	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
455
456maintainer-clean-generic:
457	@echo "This command is intended for maintainers to use"
458	@echo "it deletes files that may require special tools to rebuild."
459clean: clean-recursive
460
461clean-am: clean-generic clean-libtool mostlyclean-am
462
463distclean: distclean-recursive
464	-rm -f Makefile
465distclean-am: clean-am distclean-generic distclean-libtool \
466	distclean-tags
467
468dvi: dvi-recursive
469
470dvi-am:
471
472html: html-recursive
473
474info: info-recursive
475
476info-am:
477
478install-data-am: install-docDATA
479
480install-exec-am:
481
482install-info: install-info-recursive
483
484install-man:
485
486installcheck-am:
487
488maintainer-clean: maintainer-clean-recursive
489	-rm -f Makefile
490maintainer-clean-am: distclean-am maintainer-clean-generic
491
492mostlyclean: mostlyclean-recursive
493
494mostlyclean-am: mostlyclean-generic mostlyclean-libtool
495
496pdf: pdf-recursive
497
498pdf-am:
499
500ps: ps-recursive
501
502ps-am:
503
504uninstall-am: uninstall-docDATA uninstall-info-am
505
506uninstall-info: uninstall-info-recursive
507
508.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
509	clean clean-generic clean-libtool clean-recursive ctags \
510	ctags-recursive distclean distclean-generic distclean-libtool \
511	distclean-recursive distclean-tags distdir dvi dvi-am html \
512	html-am info info-am install install-am install-data \
513	install-data-am install-docDATA install-exec install-exec-am \
514	install-info install-info-am install-man install-strip \
515	installcheck installcheck-am installdirs installdirs-am \
516	maintainer-clean maintainer-clean-generic \
517	maintainer-clean-recursive mostlyclean mostlyclean-generic \
518	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
519	tags tags-recursive uninstall uninstall-am uninstall-docDATA \
520	uninstall-info-am
521
522# Tell versions [3.59,3.63) of GNU make to not export all variables.
523# Otherwise a system limit (for SysV at least) may be exceeded.
524.NOEXPORT:
525