• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1; RUN: opt -S -slp-vectorizer -slp-threshold=-10000 < %s | FileCheck %s
2; RUN: opt -S -slp-vectorizer -slp-threshold=0 < %s | FileCheck %s -check-prefix=ZEROTHRESH
3target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-n8:16:32:64-S128"
4
5target triple = "x86_64-apple-macosx10.8.0"
6
7define <4 x float> @simple_select(<4 x float> %a, <4 x float> %b, <4 x i32> %c) #0 {
8; CHECK-LABEL: @simple_select(
9; CHECK-NEXT: %1 = icmp ne <4 x i32> %c, zeroinitializer
10; CHECK-NEXT: select <4 x i1> %1, <4 x float> %a, <4 x float> %b
11  %c0 = extractelement <4 x i32> %c, i32 0
12  %c1 = extractelement <4 x i32> %c, i32 1
13  %c2 = extractelement <4 x i32> %c, i32 2
14  %c3 = extractelement <4 x i32> %c, i32 3
15  %a0 = extractelement <4 x float> %a, i32 0
16  %a1 = extractelement <4 x float> %a, i32 1
17  %a2 = extractelement <4 x float> %a, i32 2
18  %a3 = extractelement <4 x float> %a, i32 3
19  %b0 = extractelement <4 x float> %b, i32 0
20  %b1 = extractelement <4 x float> %b, i32 1
21  %b2 = extractelement <4 x float> %b, i32 2
22  %b3 = extractelement <4 x float> %b, i32 3
23  %cmp0 = icmp ne i32 %c0, 0
24  %cmp1 = icmp ne i32 %c1, 0
25  %cmp2 = icmp ne i32 %c2, 0
26  %cmp3 = icmp ne i32 %c3, 0
27  %s0 = select i1 %cmp0, float %a0, float %b0
28  %s1 = select i1 %cmp1, float %a1, float %b1
29  %s2 = select i1 %cmp2, float %a2, float %b2
30  %s3 = select i1 %cmp3, float %a3, float %b3
31  %ra = insertelement <4 x float> undef, float %s0, i32 0
32  %rb = insertelement <4 x float> %ra, float %s1, i32 1
33  %rc = insertelement <4 x float> %rb, float %s2, i32 2
34  %rd = insertelement <4 x float> %rc, float %s3, i32 3
35  ret <4 x float> %rd
36}
37
38declare void @llvm.assume(i1) nounwind
39
40; This entire tree is ephemeral, don't vectorize any of it.
41define <4 x float> @simple_select_eph(<4 x float> %a, <4 x float> %b, <4 x i32> %c) #0 {
42; CHECK-LABEL: @simple_select_eph(
43; CHECK-NOT: icmp ne <4 x i32>
44; CHECK-NOT: select <4 x i1>
45  %c0 = extractelement <4 x i32> %c, i32 0
46  %c1 = extractelement <4 x i32> %c, i32 1
47  %c2 = extractelement <4 x i32> %c, i32 2
48  %c3 = extractelement <4 x i32> %c, i32 3
49  %a0 = extractelement <4 x float> %a, i32 0
50  %a1 = extractelement <4 x float> %a, i32 1
51  %a2 = extractelement <4 x float> %a, i32 2
52  %a3 = extractelement <4 x float> %a, i32 3
53  %b0 = extractelement <4 x float> %b, i32 0
54  %b1 = extractelement <4 x float> %b, i32 1
55  %b2 = extractelement <4 x float> %b, i32 2
56  %b3 = extractelement <4 x float> %b, i32 3
57  %cmp0 = icmp ne i32 %c0, 0
58  %cmp1 = icmp ne i32 %c1, 0
59  %cmp2 = icmp ne i32 %c2, 0
60  %cmp3 = icmp ne i32 %c3, 0
61  %s0 = select i1 %cmp0, float %a0, float %b0
62  %s1 = select i1 %cmp1, float %a1, float %b1
63  %s2 = select i1 %cmp2, float %a2, float %b2
64  %s3 = select i1 %cmp3, float %a3, float %b3
65  %ra = insertelement <4 x float> undef, float %s0, i32 0
66  %rb = insertelement <4 x float> %ra, float %s1, i32 1
67  %rc = insertelement <4 x float> %rb, float %s2, i32 2
68  %rd = insertelement <4 x float> %rc, float %s3, i32 3
69  %q0 = extractelement <4 x float> %rd, i32 0
70  %q1 = extractelement <4 x float> %rd, i32 1
71  %q2 = extractelement <4 x float> %rd, i32 2
72  %q3 = extractelement <4 x float> %rd, i32 3
73  %q4 = fadd float %q0, %q1
74  %q5 = fadd float %q2, %q3
75  %q6 = fadd float %q4, %q5
76  %qi = fcmp olt float %q6, %q5
77  call void @llvm.assume(i1 %qi)
78  ret <4 x float> undef
79}
80
81; Insert in an order different from the vector indices to make sure it
82; doesn't matter
83define <4 x float> @simple_select_insert_out_of_order(<4 x float> %a, <4 x float> %b, <4 x i32> %c) #0 {
84; CHECK-LABEL: @simple_select_insert_out_of_order(
85; CHECK-NEXT: %1 = icmp ne <4 x i32> %c, zeroinitializer
86; CHECK-NEXT: select <4 x i1> %1, <4 x float> %a, <4 x float> %b
87  %c0 = extractelement <4 x i32> %c, i32 0
88  %c1 = extractelement <4 x i32> %c, i32 1
89  %c2 = extractelement <4 x i32> %c, i32 2
90  %c3 = extractelement <4 x i32> %c, i32 3
91  %a0 = extractelement <4 x float> %a, i32 0
92  %a1 = extractelement <4 x float> %a, i32 1
93  %a2 = extractelement <4 x float> %a, i32 2
94  %a3 = extractelement <4 x float> %a, i32 3
95  %b0 = extractelement <4 x float> %b, i32 0
96  %b1 = extractelement <4 x float> %b, i32 1
97  %b2 = extractelement <4 x float> %b, i32 2
98  %b3 = extractelement <4 x float> %b, i32 3
99  %cmp0 = icmp ne i32 %c0, 0
100  %cmp1 = icmp ne i32 %c1, 0
101  %cmp2 = icmp ne i32 %c2, 0
102  %cmp3 = icmp ne i32 %c3, 0
103  %s0 = select i1 %cmp0, float %a0, float %b0
104  %s1 = select i1 %cmp1, float %a1, float %b1
105  %s2 = select i1 %cmp2, float %a2, float %b2
106  %s3 = select i1 %cmp3, float %a3, float %b3
107  %ra = insertelement <4 x float> undef, float %s0, i32 2
108  %rb = insertelement <4 x float> %ra, float %s1, i32 1
109  %rc = insertelement <4 x float> %rb, float %s2, i32 0
110  %rd = insertelement <4 x float> %rc, float %s3, i32 3
111  ret <4 x float> %rd
112}
113
114declare void @v4f32_user(<4 x float>) #0
115declare void @f32_user(float) #0
116
117; Multiple users of the final constructed vector
118define <4 x float> @simple_select_users(<4 x float> %a, <4 x float> %b, <4 x i32> %c) #0 {
119; CHECK-LABEL: @simple_select_users(
120; CHECK-NEXT: %1 = icmp ne <4 x i32> %c, zeroinitializer
121; CHECK-NEXT: select <4 x i1> %1, <4 x float> %a, <4 x float> %b
122  %c0 = extractelement <4 x i32> %c, i32 0
123  %c1 = extractelement <4 x i32> %c, i32 1
124  %c2 = extractelement <4 x i32> %c, i32 2
125  %c3 = extractelement <4 x i32> %c, i32 3
126  %a0 = extractelement <4 x float> %a, i32 0
127  %a1 = extractelement <4 x float> %a, i32 1
128  %a2 = extractelement <4 x float> %a, i32 2
129  %a3 = extractelement <4 x float> %a, i32 3
130  %b0 = extractelement <4 x float> %b, i32 0
131  %b1 = extractelement <4 x float> %b, i32 1
132  %b2 = extractelement <4 x float> %b, i32 2
133  %b3 = extractelement <4 x float> %b, i32 3
134  %cmp0 = icmp ne i32 %c0, 0
135  %cmp1 = icmp ne i32 %c1, 0
136  %cmp2 = icmp ne i32 %c2, 0
137  %cmp3 = icmp ne i32 %c3, 0
138  %s0 = select i1 %cmp0, float %a0, float %b0
139  %s1 = select i1 %cmp1, float %a1, float %b1
140  %s2 = select i1 %cmp2, float %a2, float %b2
141  %s3 = select i1 %cmp3, float %a3, float %b3
142  %ra = insertelement <4 x float> undef, float %s0, i32 0
143  %rb = insertelement <4 x float> %ra, float %s1, i32 1
144  %rc = insertelement <4 x float> %rb, float %s2, i32 2
145  %rd = insertelement <4 x float> %rc, float %s3, i32 3
146  call void @v4f32_user(<4 x float> %rd) #0
147  ret <4 x float> %rd
148}
149
150; Unused insertelement
151define <4 x float> @simple_select_no_users(<4 x float> %a, <4 x float> %b, <4 x i32> %c) #0 {
152; CHECK-LABEL: @simple_select_no_users(
153; CHECK-NOT: icmp ne <4 x i32>
154; CHECK-NOT: select <4 x i1>
155  %c0 = extractelement <4 x i32> %c, i32 0
156  %c1 = extractelement <4 x i32> %c, i32 1
157  %c2 = extractelement <4 x i32> %c, i32 2
158  %c3 = extractelement <4 x i32> %c, i32 3
159  %a0 = extractelement <4 x float> %a, i32 0
160  %a1 = extractelement <4 x float> %a, i32 1
161  %a2 = extractelement <4 x float> %a, i32 2
162  %a3 = extractelement <4 x float> %a, i32 3
163  %b0 = extractelement <4 x float> %b, i32 0
164  %b1 = extractelement <4 x float> %b, i32 1
165  %b2 = extractelement <4 x float> %b, i32 2
166  %b3 = extractelement <4 x float> %b, i32 3
167  %cmp0 = icmp ne i32 %c0, 0
168  %cmp1 = icmp ne i32 %c1, 0
169  %cmp2 = icmp ne i32 %c2, 0
170  %cmp3 = icmp ne i32 %c3, 0
171  %s0 = select i1 %cmp0, float %a0, float %b0
172  %s1 = select i1 %cmp1, float %a1, float %b1
173  %s2 = select i1 %cmp2, float %a2, float %b2
174  %s3 = select i1 %cmp3, float %a3, float %b3
175  %ra = insertelement <4 x float> undef, float %s0, i32 0
176  %rb = insertelement <4 x float> %ra, float %s1, i32 1
177  %rc = insertelement <4 x float> undef, float %s2, i32 2
178  %rd = insertelement <4 x float> %rc, float %s3, i32 3
179  ret <4 x float> %rd
180}
181
182; Make sure infinite loop doesn't happen which I ran into when trying
183; to do this backwards this backwards
184define <4 x i32> @reconstruct(<4 x i32> %c) #0 {
185; CHECK-LABEL: @reconstruct(
186  %c0 = extractelement <4 x i32> %c, i32 0
187  %c1 = extractelement <4 x i32> %c, i32 1
188  %c2 = extractelement <4 x i32> %c, i32 2
189  %c3 = extractelement <4 x i32> %c, i32 3
190  %ra = insertelement <4 x i32> undef, i32 %c0, i32 0
191  %rb = insertelement <4 x i32> %ra, i32 %c1, i32 1
192  %rc = insertelement <4 x i32> %rb, i32 %c2, i32 2
193  %rd = insertelement <4 x i32> %rc, i32 %c3, i32 3
194  ret <4 x i32> %rd
195}
196
197define <2 x float> @simple_select_v2(<2 x float> %a, <2 x float> %b, <2 x i32> %c) #0 {
198; CHECK-LABEL: @simple_select_v2(
199; CHECK: icmp ne <2 x i32>
200; CHECK: select <2 x i1>
201  %c0 = extractelement <2 x i32> %c, i32 0
202  %c1 = extractelement <2 x i32> %c, i32 1
203  %a0 = extractelement <2 x float> %a, i32 0
204  %a1 = extractelement <2 x float> %a, i32 1
205  %b0 = extractelement <2 x float> %b, i32 0
206  %b1 = extractelement <2 x float> %b, i32 1
207  %cmp0 = icmp ne i32 %c0, 0
208  %cmp1 = icmp ne i32 %c1, 0
209  %s0 = select i1 %cmp0, float %a0, float %b0
210  %s1 = select i1 %cmp1, float %a1, float %b1
211  %ra = insertelement <2 x float> undef, float %s0, i32 0
212  %rb = insertelement <2 x float> %ra, float %s1, i32 1
213  ret <2 x float> %rb
214}
215
216; Make sure when we construct partial vectors, we don't keep
217; re-visiting the insertelement chains starting with undef
218; (low cost threshold needed to force this to happen)
219define <4 x float> @simple_select_partial_vector(<4 x float> %a, <4 x float> %b, <4 x i32> %c) #0 {
220  %c0 = extractelement <4 x i32> %c, i32 0
221  %c1 = extractelement <4 x i32> %c, i32 1
222  %a0 = extractelement <4 x float> %a, i32 0
223  %a1 = extractelement <4 x float> %a, i32 1
224  %b0 = extractelement <4 x float> %b, i32 0
225  %b1 = extractelement <4 x float> %b, i32 1
226  %1 = insertelement <2 x i32> undef, i32 %c0, i32 0
227  %2 = insertelement <2 x i32> %1, i32 %c1, i32 1
228  %3 = icmp ne <2 x i32> %2, zeroinitializer
229  %4 = insertelement <2 x float> undef, float %a0, i32 0
230  %5 = insertelement <2 x float> %4, float %a1, i32 1
231  %6 = insertelement <2 x float> undef, float %b0, i32 0
232  %7 = insertelement <2 x float> %6, float %b1, i32 1
233  %8 = select <2 x i1> %3, <2 x float> %5, <2 x float> %7
234  %9 = extractelement <2 x float> %8, i32 0
235  %ra = insertelement <4 x float> undef, float %9, i32 0
236  %10 = extractelement <2 x float> %8, i32 1
237  %rb = insertelement <4 x float> %ra, float %10, i32 1
238  ret <4 x float> %rb
239}
240
241; Make sure that vectorization happens even if insertelements operations
242; must be rescheduled. The case here is from compiling Julia.
243define <4 x float> @reschedule_extract(<4 x float> %a, <4 x float> %b) {
244; CHECK-LABEL: @reschedule_extract(
245; CHECK: %1 = fadd <4 x float> %a, %b
246  %a0 = extractelement <4 x float> %a, i32 0
247  %b0 = extractelement <4 x float> %b, i32 0
248  %c0 = fadd float %a0, %b0
249  %v0 = insertelement <4 x float> undef, float %c0, i32 0
250  %a1 = extractelement <4 x float> %a, i32 1
251  %b1 = extractelement <4 x float> %b, i32 1
252  %c1 = fadd float %a1, %b1
253  %v1 = insertelement <4 x float> %v0, float %c1, i32 1
254  %a2 = extractelement <4 x float> %a, i32 2
255  %b2 = extractelement <4 x float> %b, i32 2
256  %c2 = fadd float %a2, %b2
257  %v2 = insertelement <4 x float> %v1, float %c2, i32 2
258  %a3 = extractelement <4 x float> %a, i32 3
259  %b3 = extractelement <4 x float> %b, i32 3
260  %c3 = fadd float %a3, %b3
261  %v3 = insertelement <4 x float> %v2, float %c3, i32 3
262  ret <4 x float> %v3
263}
264
265; Check that cost model for vectorization takes credit for
266; instructions that are erased.
267define <4 x float> @take_credit(<4 x float> %a, <4 x float> %b) {
268; ZEROTHRESH-LABEL: @take_credit(
269; ZEROTHRESH: %1 = fadd <4 x float> %a, %b
270  %a0 = extractelement <4 x float> %a, i32 0
271  %b0 = extractelement <4 x float> %b, i32 0
272  %c0 = fadd float %a0, %b0
273  %a1 = extractelement <4 x float> %a, i32 1
274  %b1 = extractelement <4 x float> %b, i32 1
275  %c1 = fadd float %a1, %b1
276  %a2 = extractelement <4 x float> %a, i32 2
277  %b2 = extractelement <4 x float> %b, i32 2
278  %c2 = fadd float %a2, %b2
279  %a3 = extractelement <4 x float> %a, i32 3
280  %b3 = extractelement <4 x float> %b, i32 3
281  %c3 = fadd float %a3, %b3
282  %v0 = insertelement <4 x float> undef, float %c0, i32 0
283  %v1 = insertelement <4 x float> %v0, float %c1, i32 1
284  %v2 = insertelement <4 x float> %v1, float %c2, i32 2
285  %v3 = insertelement <4 x float> %v2, float %c3, i32 3
286  ret <4 x float> %v3
287}
288
289; Make sure we handle multiple trees that feed one build vector correctly.
290define <4 x double> @multi_tree(double %w, double %x, double %y, double %z) {
291entry:
292  %t0 = fadd double %w , 0.000000e+00
293  %t1 = fadd double %x , 1.000000e+00
294  %t2 = fadd double %y , 2.000000e+00
295  %t3 = fadd double %z , 3.000000e+00
296  %t4 = fmul double %t0, 1.000000e+00
297  %i1 = insertelement <4 x double> undef, double %t4, i32 3
298  %t5 = fmul double %t1, 1.000000e+00
299  %i2 = insertelement <4 x double> %i1, double %t5, i32 2
300  %t6 = fmul double %t2, 1.000000e+00
301  %i3 = insertelement <4 x double> %i2, double %t6, i32 1
302  %t7 = fmul double %t3, 1.000000e+00
303  %i4 = insertelement <4 x double> %i3, double %t7, i32 0
304  ret <4 x double> %i4
305}
306; CHECK-LABEL: @multi_tree
307; CHECK-DAG:  %[[V0:.+]] = insertelement <2 x double> undef, double %w, i32 0
308; CHECK-DAG:  %[[V1:.+]] = insertelement <2 x double> %[[V0]], double %x, i32 1
309; CHECK-DAG:  %[[V2:.+]] = fadd <2 x double> %[[V1]], <double 0.000000e+00, double 1.000000e+00>
310; CHECK-DAG:  %[[V3:.+]] = insertelement <2 x double> undef, double %y, i32 0
311; CHECK-DAG:  %[[V4:.+]] = insertelement <2 x double> %[[V3]], double %z, i32 1
312; CHECK-DAG:  %[[V5:.+]] = fadd <2 x double> %[[V4]], <double 2.000000e+00, double 3.000000e+00>
313; CHECK-DAG:  %[[V6:.+]] = fmul <2 x double> <double 1.000000e+00, double 1.000000e+00>, %[[V2]]
314; CHECK-DAG:  %[[V7:.+]] = extractelement <2 x double> %[[V6]], i32 0
315; CHECK-DAG:  %[[I1:.+]] = insertelement <4 x double> undef, double %[[V7]], i32 3
316; CHECK-DAG:  %[[V8:.+]] = extractelement <2 x double> %[[V6]], i32 1
317; CHECK-DAG:  %[[I2:.+]] = insertelement <4 x double> %[[I1]], double %[[V8]], i32 2
318; CHECK-DAG:  %[[V9:.+]] = fmul <2 x double> <double 1.000000e+00, double 1.000000e+00>, %[[V5]]
319; CHECK-DAG:  %[[V10:.+]] = extractelement <2 x double> %[[V9]], i32 0
320; CHECK-DAG:  %[[I3:.+]] = insertelement <4 x double> %i2, double %[[V10]], i32 1
321; CHECK-DAG:  %[[V11:.+]] = extractelement <2 x double> %[[V9]], i32 1
322; CHECK-DAG:  %[[I4:.+]] = insertelement <4 x double> %i3, double %[[V11]], i32 0
323; CHECK:  ret <4 x double> %[[I4]]
324
325attributes #0 = { nounwind ssp uwtable "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf"="true" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
326