Lines Matching refs:device
4 Maintained by Torben Mathiasen <device@lanana.org>
9 device numbers and /dev directory nodes for the Linux operating
13 http://www.lanana.org/docs/device-list/ or
14 ftp://ftp.kernel.org/pub/linux/docs/device-list/. This version may be
47 appropriate device information. Also, if you have additional
54 correct address... <device@lanana.org>. I receive hundreds of email
58 saying just "device number request" in the subject.
60 Second, please include a description of the device *in the same format
63 device and avoid conflicts.
75 device names and numbers in any way public, at least to the point
81 0 Unnamed devices (e.g. non-device mounts)
82 0 = reserved as null device number
88 3 = /dev/null Null device
139 To specify format, add to the autodetect device number:
179 NOTE: The letter in the device name (d, q, h or u)
199 For partitions, add to the whole disk device number:
228 when its not possible to create the real device nodes
234 0 = /dev/tty Current TTY device
237 64 = /dev/cua0 Callout device for ttyS0
239 255 = /dev/cua191 Callout device for ttyS191
267 0 = /dev/loop0 First loop device
268 1 = /dev/loop1 Second loop device
313 automatic rewind on device close. The MTREW or MTOFFL
315 the device used to access it.
342 128 = /dev/beep Fancy beep device
347 133 = /dev/exttrp External device trap
357 146 = /dev/graphics Linux/SGI graphics device
359 148 = /dev/gfx Linux/SGI graphics effects device
364 153 = /dev/mergemem Memory merge device
383 172 = /dev/usemaclone Semaphore clone device
391 180 = /dev/vrbuttons Vr41xx button input device
397 187 = /dev/irnet IrNET device
408 200 = /dev/net/tun TAP/TUN network device
419 212 = /dev/watchdogs/0 First watchdog device
420 213 = /dev/watchdogs/1 Second watchdog device
421 214 = /dev/watchdogs/2 Third watchdog device
422 215 = /dev/watchdogs/3 Fourth watchdog device
433 226 = /dev/systrace Systrace device
441 11 char Raw keyboard device (Linux/SPARC only)
442 0 = /dev/kbd Raw keyboard device
444 11 char Serial Mux device (Linux/PA-RISC only)
466 The device names specified are proposed -- if there
486 Each device type has 5 bits (32 minors).
502 7 = /dev/audioctl SPARC audio control device
503 8 = /dev/sequencer2 Sequencer -- alternate device
546 0 = /dev/cuh0 Callout device for ttyH0
547 1 = /dev/cuh1 Callout device for ttyH1
569 0 = /dev/cub0 Callout device for ttyC0
571 31 = /dev/cub31 Callout device for ttyC31
577 0 = /dev/sg0 First generic SCSI device
578 1 = /dev/sg1 Second generic SCSI device
584 device-naming practice.
590 This device is used on the ARM-based Acorn RiscPC.
606 0 = /dev/cud0 Callout device for ttyD0
607 1 = /dev/cud1 Callout device for ttyD1
629 0 = /dev/cue0 Callout device for ttyE0
630 1 = /dev/cue1 Callout device for ttyE1
632 64 = /dev/cue64 Callout device for ttyE64
633 65 = /dev/cue65 Callout device for ttyE65
635 128 = /dev/cue128 Callout device for ttyE128
636 129 = /dev/cue129 Callout device for ttyE129
638 192 = /dev/cue192 Callout device for ttyE192
639 193 = /dev/cue193 Callout device for ttyE193
758 /dev/lmscd is an older name for this device. This
792 0 = /dev/cux0 Callout device for ttyX0
793 1 = /dev/cux1 Callout device for ttyX1
838 0 = /dev/route Routing, device updates, kernel to user
841 16 = /dev/tap0 First Ethertap device
843 31 = /dev/tap15 16th Ethertap device
871 This device is used for status query, board control
873 accessible as a standard networking "eth" device.
903 This device is obsolete and will be removed in a
915 This device is obsolete and will be removed in a
924 well as a general "example" device number. It
925 should never be used for a device driver that is being
940 0 = /dev/nb0 First network block device
941 1 = /dev/nb1 Second network block device
949 the net, implementing block device in userland etc.
952 0 = /dev/cui0 Callout device for ttyI0
954 63 = /dev/cui63 Callout device for ttyI63
975 128 = /dev/ippp0 First SyncPPP device
977 191 = /dev/ippp63 64th SyncPPP device
1002 0 = /dev/cur0 Callout device for ttyR0
1003 1 = /dev/cur1 Callout device for ttyR1
1031 0 = /dev/cul0 Callout device for ttyL0
1032 1 = /dev/cul1 Callout device for ttyL1
1084 This device is used for the interfacing to the MC683xx
1152 0 = /dev/cup0 Callout device for ttyP0
1153 1 = /dev/cup1 Callout device for ttyP1
1161 59 block Generic PDA filesystem device
1162 0 = /dev/pda0 First PDA device
1163 1 = /dev/pda1 Second PDA device
1186 1 = /dev/scramdisk/1 First encrypted device
1187 2 = /dev/scramdisk/2 Second encrypted device
1189 255 = /dev/scramdisk/255 255th encrypted device
1200 0 = /dev/plink0 First plink device
1201 1 = /dev/plink1 Second plink device
1202 2 = /dev/plink2 Third plink device
1203 3 = /dev/plink3 Fourth plink device
1204 64 = /dev/rplink0 First plink device, raw
1205 65 = /dev/rplink1 Second plink device, raw
1206 66 = /dev/rplink2 Third plink device, raw
1207 67 = /dev/rplink3 Fourth plink device, raw
1208 128 = /dev/plink0d First plink device, debug
1209 129 = /dev/plink1d Second plink device, debug
1210 130 = /dev/plink2d Third plink device, debug
1211 131 = /dev/plink3d Fourth plink device, debug
1212 192 = /dev/rplink0d First plink device, raw, debug
1213 193 = /dev/rplink1d Second plink device, raw, debug
1214 194 = /dev/rplink2d Third plink device, raw, debug
1215 195 = /dev/rplink3d Fourth plink device, raw, debug
1264 0 = /dev/capi20 Control device
1348 0 = /dev/cuf0 Callout device for ttyF0
1349 1 = /dev/cuf1 Callout device for ttyF1
1351 63 = /dev/cuf63 Callout device for ttyF63
1352 64 = /dev/cuf64 Callout device for ttyF64
1353 65 = /dev/cuf65 Callout device for ttyF65
1355 127 = /dev/cuf127 Callout device for ttyF127
1356 128 = /dev/cuf128 Callout device for ttyF128
1357 129 = /dev/cuf129 Callout device for ttyF129
1359 191 = /dev/cuf191 Callout device for ttyF191
1360 192 = /dev/cuf192 Callout device for ttyF192
1361 193 = /dev/cuf193 Callout device for ttyF193
1363 255 = /dev/cuf255 Callout device for ttyF255
1376 0 = /dev/ip2ipl0 Loadware device for board 0
1377 1 = /dev/ip2stat0 Status device for board 0
1378 4 = /dev/ip2ipl1 Loadware device for board 1
1379 5 = /dev/ip2stat1 Status device for board 1
1380 8 = /dev/ip2ipl2 Loadware device for board 2
1381 9 = /dev/ip2stat2 Status device for board 2
1382 12 = /dev/ip2ipl3 Loadware device for board 3
1383 13 = /dev/ip2stat3 Status device for board 3
1396 0 = /dev/SCI/0 SCI device 0
1397 1 = /dev/SCI/1 SCI device 1
1431 0 = /dev/cuw0 Callout device for ttyW0
1432 1 = /dev/cuw1 Callout device for ttyW1
1434 8 = /dev/cuw8 Callout device for ttyW8
1477 0 = /dev/cum0 Callout device for ttyM0
1478 1 = /dev/cum1 Callout device for ttyM1
1505 0 = /dev/video0 Video capture/overlay device
1507 63 = /dev/video63 Video capture/overlay device
1508 64 = /dev/radio0 Radio device
1510 127 = /dev/radio63 Radio device
1511 192 = /dev/vtx0 Teletext device
1513 223 = /dev/vtx31 Teletext device
1579 1 = /dev/qcntl0 First device pushed
1580 2 = /dev/qcntl1 Second device pushed
1609 0 = /dev/controla0 First device on chain
1610 1 = /dev/controla1 Second device on chain
1698 94 char miroVIDEO DC10/30 capture/playback device {2.6}
1704 0 = /dev/dasda First DASD device, major
1705 1 = /dev/dasda1 First DASD device, block 1
1706 2 = /dev/dasda2 First DASD device, block 2
1707 3 = /dev/dasda3 First DASD device, block 3
1708 4 = /dev/dasdb Second DASD device, major
1709 5 = /dev/dasdb1 Second DASD device, block 1
1710 6 = /dev/dasdb2 Second DASD device, block 2
1711 7 = /dev/dasdb3 Second DASD device, block 3
1715 0 = /dev/ipl Filter control device/log file
1716 1 = /dev/ipnat NAT control device/log file
1718 3 = /dev/ipauth Authentication control device/log file
1736 0 = /dev/pg0 First parallel port ATAPI device
1737 1 = /dev/pg1 Second parallel port ATAPI device
1738 2 = /dev/pg2 Third parallel port ATAPI device
1739 3 = /dev/pg3 Fourth parallel port ATAPI device
1745 0 = /dev/comedi0 First comedi device
1746 1 = /dev/comedi1 Second comedi device
1751 98 block User-mode virtual block device
1752 0 = /dev/ubda First user-mode block device
1753 16 = /dev/udbb Second user-mode block device
1760 This device is used by the user-mode virtual kernel port.
1771 0 = /dev/phone0 First telephony device
1772 1 = /dev/phone1 Second telephony device
1787 For each device, partitions are added as:
1800 102 block Compressed block device
1801 0 = /dev/cbd/a First compressed block device, whole device
1802 16 = /dev/cbd/b Second compressed block device, whole device
1804 240 = /dev/cbd/p 16th compressed block device, whole device
1811 0 = /dev/nnpfs0 First NNPFS device
1812 1 = /dev/nnpfs1 Second NNPFS device
1815 The NNPFS device gives user mode filesystem
1821 103 block Audit device
1822 0 = /dev/audit Audit device
1866 107 char 3Dfx Voodoo Graphics device
1867 0 = /dev/3dfx Primary 3Dfx graphics device
1939 There is currently a device-naming conflict between
1956 0 = /dev/cum0 Callout device for ttyM0
1957 1 = /dev/cum1 Callout device for ttyM1
2062 0 = /dev/evms/block_device EVMS block device
2063 1 = /dev/evms/legacyname1 First EVMS legacy device
2064 2 = /dev/evms/legacyname2 Second EVMS legacy device
2068 254 = /dev/evms/EVMSname2 Second EVMS native device
2069 255 = /dev/evms/EVMSname1 First EVMS native device
2072 device names. For example, /dev/hda5 would become
2095 These devices should not have corresponding device
2194 These device nodes are automatically generated with
2275 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2276 0 = mounted device 256
2277 255 = mounted device 511
2300 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2301 0 = mounted device 512
2302 255 = mounted device 767
2305 0 = /dev/scramnet0 First SCRAMNet device
2306 1 = /dev/scramnet1 Second SCRAMNet device
2309 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2310 0 = mounted device 768
2311 255 = mounted device 1023
2313 147 char Aureal Semiconductor Vortex Audio device
2319 0 = /dev/drbd0 First DRBD device
2320 1 = /dev/drbd1 Second DRBD device
2329 0 = /dev/cut0 Callout device for ttyT0
2330 1 = /dev/cut0 Callout device for ttyT1
2354 0 = /dev/spi0 First SPI device on the bus
2355 1 = /dev/spi1 Second SPI device on the bus
2357 15 = /dev/spi15 Sixteenth SPI device on the bus
2381 0 = /dev/cusr0 Callout device for ttySR0
2383 255 = /dev/cusr255 Callout device for ttySR255
2391 0 = /dev/cusr256 Callout device for ttySR256
2393 255 = /dev/cusr511 Callout device for ttySR511
2425 0 = /dev/ircomm0 First IrCOMM device
2426 1 = /dev/ircomm1 Second IrCOMM device
2428 16 = /dev/irlpt0 First IrLPT device
2429 17 = /dev/irlpt1 Second IrLPT device
2447 162 char Raw block device interface
2448 0 = /dev/rawctl Raw I/O control device
2449 1 = /dev/raw/raw1 First raw I/O device
2450 2 = /dev/raw/raw2 Second raw I/O device
2470 0 = /dev/cuch0 Callout device for ttyCH0
2472 63 = /dev/cuch63 Callout device for ttyCH63
2480 0 = /dev/cuacm0 Callout device for ttyACM0
2481 1 = /dev/cuacm1 Callout device for ttyACM1
2509 0 = /dev/cumx0 Callout device for ttyMX0
2510 1 = /dev/cumx1 Callout device for ttyMX1
2512 127 = /dev/cumx127 Callout device for ttyMX127
2520 0 = /dev/cusi0 Callout device for ttySI0
2521 1 = /dev/cusi1 Callout device for ttySI1
2525 0 = /dev/nfastpci0 First nFast PCI device
2526 1 = /dev/nfastpci1 First nFast PCI device
2546 0 = /dev/dvxirq0 First DVX device
2547 1 = /dev/dvxirq1 Second DVX device
2560 96 = /dev/usb/hiddev0 1st USB HID device
2562 111 = /dev/usb/hiddev15 16th USB HID device
2563 128 = /dev/usb/brlvgr0 First Braille Voyager device
2565 131 = /dev/usb/brlvgr3 Fourth Braille Voyager device
2566 132 = /dev/usb/idmouse ID Mouse (fingerprint scanner) device
2567 133 = /dev/usb/sisusbvga1 First SiSUSB VGA device
2569 140 = /dev/usb/sisusbvga8 Eighth SISUSB VGA device
2570 144 = /dev/usb/lcd USB LCD device
2571 160 = /dev/usb/legousbtower0 1st USB Legotower device
2573 175 = /dev/usb/legousbtower15 16th USB Legotower device
2574 176 = /dev/usb/usbtmc1 First USB TMC device
2576 192 = /dev/usb/usbtmc16 16th USB TMC device
2577 240 = /dev/usb/dabusb0 First daubusb device
2579 243 = /dev/usb/dabusb3 Fourth dabusb device
2582 0 = /dev/uba First USB block device
2583 8 = /dev/ubb Second USB block device
2584 16 = /dev/ubc Third USB block device
2602 This device used to be assigned to major number 144.
2617 186 char Object-based storage control device
2618 0 = /dev/obd0 First obd control device
2619 1 = /dev/obd1 Second obd control device
2624 187 char DESkey hardware encryption device
2635 0 = /dev/cuusb0 Callout device for ttyUSB0
2636 1 = /dev/cuusb1 Callout device for ttyUSB1
2647 0 = /dev/profile Profiling control device
2648 1 = /dev/profile0 Profiling device for CPU 0
2649 2 = /dev/profile1 Profiling device for CPU 1
2653 0 = /dev/trace Tracing control device
2654 1 = /dev/trace0 Tracing device for CPU 0
2655 2 = /dev/trace1 Tracing device for CPU 1
2666 16 = /dev/mvideo/status1 Second device
2668 32 = /dev/mvideo/status2 Third device
2671 240 = /dev/mvideo/status15 16th device
2678 255 = /dev/nvidiactl Nvidia card control device
2695 130 = /dev/tnf/trace Tracing device
2724 0 = /dev/vx/rdmp/* First multipath device
2725 1 = /dev/vx/rdmp/* Second multipath device
2728 0 = /dev/vx/dmp/* First multipath device
2729 1 = /dev/vx/dmp/* Second multipath device
2814 205 char Low-density serial ports (alternate device)
2815 0 = /dev/culu0 Callout device for ttyLU0
2816 1 = /dev/culu1 Callout device for ttyLU1
2817 2 = /dev/culu2 Callout device for ttyLU2
2818 3 = /dev/culu3 Callout device for ttyLU3
2819 4 = /dev/cufb0 Callout device for ttyFB0
2820 5 = /dev/cusa0 Callout device for ttySA0
2821 6 = /dev/cusa1 Callout device for ttySA1
2822 7 = /dev/cusa2 Callout device for ttySA2
2823 8 = /dev/cusc0 Callout device for ttySC0
2824 9 = /dev/cusc1 Callout device for ttySC1
2825 10 = /dev/cusc2 Callout device for ttySC2
2826 11 = /dev/cusc3 Callout device for ttySC3
2827 12 = /dev/cufw0 Callout device for ttyFW0
2828 13 = /dev/cufw1 Callout device for ttyFW1
2829 14 = /dev/cufw2 Callout device for ttyFW2
2830 15 = /dev/cufw3 Callout device for ttyFW3
2831 16 = /dev/cuam0 Callout device for ttyAM0
2833 31 = /dev/cuam15 Callout device for ttyAM15
2834 32 = /dev/cudb0 Callout device for ttyDB0
2836 39 = /dev/cudb7 Callout device for ttyDB7
2837 40 = /dev/cusg0 Callout device for ttySG0
2838 41 = /dev/ttycusmx0 Callout device for ttySMX0
2839 42 = /dev/ttycusmx1 Callout device for ttySMX1
2840 43 = /dev/ttycusmx2 Callout device for ttySMX2
2841 46 = /dev/cucpm0 Callout device for ttyCPM0
2843 49 = /dev/cucpm5 Callout device for ttyCPM5
2844 50 = /dev/cuioc40 Callout device for ttyIOC40
2846 81 = /dev/cuioc431 Callout device for ttyIOC431
2847 82 = /dev/cuvr0 Callout device for ttyVR0
2848 83 = /dev/cuvr1 Callout device for ttyVR1
2880 usb-storage SCSI emulation and this osst device and
2904 0 = /dev/cuu0 Callout device for ttyU0
2905 1 = /dev/cuu1 Callout device for ttyU1
2909 0 = /dev/sbei/wxcfg0 Configuration device for board 0
2910 1 = /dev/sbei/dld0 Download device for board 0
2911 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2912 3 = /dev/sbei/wan01 WAN device, port 1, board 0
2913 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2914 5 = /dev/sbei/wan03 WAN device, port 3, board 0
2915 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
2916 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
2917 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2918 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
2919 10 = /dev/sbei/wxcfg1 Configuration device for board 1
2920 11 = /dev/sbei/dld1 Download device for board 1
2921 12 = /dev/sbei/wan10 WAN device, port 0, board 1
2922 13 = /dev/sbei/wan11 WAN device, port 1, board 1
2923 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2924 15 = /dev/sbei/wan13 WAN device, port 3, board 1
2925 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
2926 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
2927 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2928 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
2942 3 = /dev/dvb/adapter0/frontend0 first frontend device of first card
2943 4 = /dev/dvb/adapter0/demux0 first demux device of first card
2944 5 = /dev/dvb/adapter0/dvr0 first digital video recoder device of first card
2946 7 = /dev/dvb/adapter0/net0 first network device of first card
2947 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2957 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device
2958 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device
2962 0 = /dev/curf0 Callout device for rfcomm0
2963 1 = /dev/curf1 Callout device for rfcomm1
3004 0 = /dev/cuy0 Callout device for ttyY0
3005 1 = /dev/cuy1 Callout device for ttyY1
3056 automatic rewind on device close. The MTREW or MTOFFL
3058 the device used to access it.
3064 63 = /dev/infiniband/umad63 63rd InfiniBandMad device
3065 64 = /dev/infiniband/issm0 First InfiniBand IsSM device
3066 65 = /dev/infiniband/issm1 Second InfiniBand IsSM device
3068 127 = /dev/infiniband/issm63 63rd InfiniBand IsSM device
3069 128 = /dev/infiniband/uverbs0 First InfiniBand verbs device
3070 129 = /dev/infiniband/uverbs1 Second InfiniBand verbs device
3072 159 = /dev/infiniband/uverbs31 31st InfiniBand verbs device
3075 0 = /dev/biometric/sensor0/fingerprint first fingerprint sensor on first device
3076 1 = /dev/biometric/sensor0/iris first iris sensor on first device
3077 2 = /dev/biometric/sensor0/retina first retina sensor on first device
3078 3 = /dev/biometric/sensor0/voiceprint first voiceprint sensor on first device
3079 4 = /dev/biometric/sensor0/facial first facial sensor on first device
3080 5 = /dev/biometric/sensor0/hand first hand sensor on first device
3082 10 = /dev/biometric/sensor1/fingerprint first fingerprint sensor on second device
3084 20 = /dev/biometric/sensor2/fingerprint first fingerprint sensor on third device
3088 0 = /dev/ipath Primary device for programs (any unit)
3110 larger number space. No device nodes with this major
3189 /dev/mouse mouse port symbolic Current mouse device
3190 /dev/tape tape device symbolic Current tape device
3191 /dev/cdrom CD-ROM device symbolic Current CD-ROM device
3192 /dev/cdwriter CD-writer symbolic Current CD-writer device
3193 /dev/scanner scanner symbolic Current scanner device
3194 /dev/modem modem port symbolic Current dialout device
3195 /dev/root root device symbolic Current root filesystem
3196 /dev/swap swap device symbolic Current swap device
3200 exists, /dev/modem should point to the appropriate primary TTY device
3208 /dev/mouse may point to a primary serial TTY device, a hardware mouse
3209 device, or a socket for a mouse driver program (e.g. /dev/gpmdata).
3223 cannot be provided with standard device nodes.
3231 terminal device is any device that could act as a controlling terminal
3245 A hash mark (#) in a device name is used here to indicate a decimal
3248 Virtual consoles and the console device
3253 /dev/tty0 is the device that should be used to access the system video
3258 The console device, /dev/console, is the device to which system
3263 a serial port primary (tty*, not cu*) device, depending on the
3268 Serial ports are RS-232 serial ports and any device which simulates
3270 as the ISDN driver.) Under Linux, each serial ports has two device
3271 names, the primary or callin device and the alternate or callout one.
3272 Each kind of device is indicated by a different letter. For any
3277 case for the "tty" device (e.g. /dev/ttyDP#) and lower case for the
3278 "cu" device (e.g. /dev/cudp#).
3297 device. In order to avoid deadlocks, it is recommended that the locks
3302 3. The alternate device name (/var/lock/LCK..cua2)
3309 to create lock files for the corresponding alternate device names
3311 port TTY, for which no alternate device would exist.
3322 Once the master side has been opened, the corresponding slave device
3323 can be used in the same manner as any TTY device. The master and
3329 device, /dev/ptmx, to all the masters (opening it will automatically
3333 namespace and enables the kernel to automatically create the device