1Linux 2.6.x on MPC52xx family 2----------------------------- 3 4For the latest info, go to http://www.246tNt.com/mpc52xx/ 5 6To compile/use : 7 8 - U-Boot: 9 # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION 10 if you wish to ). 11 # make lite5200_defconfig 12 # make uImage 13 14 then, on U-boot: 15 => tftpboot 200000 uImage 16 => tftpboot 400000 pRamdisk 17 => bootm 200000 400000 18 19 - DBug: 20 # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION 21 if you wish to ). 22 # make lite5200_defconfig 23 # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz 24 # make zImage.initrd 25 # make 26 27 then in DBug: 28 DBug> dn -i zImage.initrd.lite5200 29 30 31Some remarks : 32 - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100 33 is not supported, and I'm not sure anyone is interesting in working on it 34 so. I didn't took 5xxx because there's apparently a lot of 5xxx that have 35 nothing to do with the MPC5200. I also included the 'MPC' for the same 36 reason. 37 - Of course, I inspired myself from the 2.4 port. If you think I forgot to 38 mention you/your company in the copyright of some code, I'll correct it 39 ASAP. 40