1 /*
2 * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
3 *
4 * Marvell RD-88F6192-NAS Reference Board Setup
5 *
6 * This file is licensed under the terms of the GNU General Public
7 * License version 2. This program is licensed "as is" without any
8 * warranty of any kind, whether express or implied.
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/pci.h>
15 #include <linux/irq.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/mtd/nand.h>
18 #include <linux/timer.h>
19 #include <linux/ata_platform.h>
20 #include <linux/mv643xx_eth.h>
21 #include <linux/spi/flash.h>
22 #include <linux/spi/spi.h>
23 #include <linux/spi/orion_spi.h>
24 #include <asm/mach-types.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/pci.h>
27 #include <mach/kirkwood.h>
28 #include "common.h"
29
30 #define RD88F6192_GPIO_USB_VBUS 10
31
32 static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
33 .phy_addr = MV643XX_ETH_PHY_ADDR(8),
34 };
35
36 static struct mv_sata_platform_data rd88f6192_sata_data = {
37 .n_ports = 2,
38 };
39
40 static const struct flash_platform_data rd88F6192_spi_slave_data = {
41 .type = "m25p128",
42 };
43
44 static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
45 {
46 .modalias = "m25p80",
47 .platform_data = &rd88F6192_spi_slave_data,
48 .irq = -1,
49 .max_speed_hz = 20000000,
50 .bus_num = 0,
51 .chip_select = 0,
52 },
53 };
54
rd88f6192_init(void)55 static void __init rd88f6192_init(void)
56 {
57 /*
58 * Basic setup. Needs to be called early.
59 */
60 kirkwood_init();
61
62 kirkwood_ehci_init();
63 kirkwood_ge00_init(&rd88f6192_ge00_data);
64 kirkwood_rtc_init();
65 kirkwood_sata_init(&rd88f6192_sata_data);
66 spi_register_board_info(rd88F6192_spi_slave_info,
67 ARRAY_SIZE(rd88F6192_spi_slave_info));
68 kirkwood_spi_init();
69 kirkwood_uart0_init();
70 kirkwood_xor0_init();
71 kirkwood_xor1_init();
72 }
73
rd88f6192_pci_init(void)74 static int __init rd88f6192_pci_init(void)
75 {
76 if (machine_is_rd88f6192_nas())
77 kirkwood_pcie_init();
78
79 return 0;
80 }
81 subsys_initcall(rd88f6192_pci_init);
82
83 MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
84 /* Maintainer: Saeed Bishara <saeed@marvell.com> */
85 .phys_io = KIRKWOOD_REGS_PHYS_BASE,
86 .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
87 .boot_params = 0x00000100,
88 .init_machine = rd88f6192_init,
89 .map_io = kirkwood_map_io,
90 .init_irq = kirkwood_init_irq,
91 .timer = &kirkwood_timer,
92 MACHINE_END
93