• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * arch/blackfin/lib/ins.S - ins{bwl} using hardware loops
3 *
4 * Copyright 2004-2008 Analog Devices Inc.
5 * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
6 * Licensed under the GPL-2 or later.
7 */
8
9#include <linux/linkage.h>
10#include <asm/blackfin.h>
11
12.align 2
13
14#ifdef CONFIG_IPIPE
15# define DO_CLI \
16	[--sp] = rets; \
17	[--sp] = (P5:0); \
18	sp += -12; \
19	call ___ipipe_stall_root_raw; \
20	sp += 12; \
21	(P5:0) = [sp++];
22# define CLI_INNER_NOP
23#else
24# define DO_CLI cli R3;
25# define CLI_INNER_NOP nop; nop; nop;
26#endif
27
28#ifdef CONFIG_IPIPE
29# define DO_STI \
30	sp += -12; \
31	call ___ipipe_unstall_root_raw; \
32	sp += 12; \
332:	rets = [sp++];
34#else
35# define DO_STI 2: sti R3;
36#endif
37
38#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
39# define CLI_OUTER DO_CLI;
40# define STI_OUTER DO_STI;
41# define CLI_INNER 1:
42# if ANOMALY_05000416
43#  define STI_INNER nop; 2: nop;
44# else
45#  define STI_INNER 2:
46# endif
47#else
48# define CLI_OUTER
49# define STI_OUTER
50# define CLI_INNER 1: DO_CLI; CLI_INNER_NOP;
51# define STI_INNER DO_STI;
52#endif
53
54/*
55 * Reads on the Blackfin are speculative. In Blackfin terms, this means they
56 * can be interrupted at any time (even after they have been issued on to the
57 * external bus), and re-issued after the interrupt occurs.
58 *
59 * If a FIFO is sitting on the end of the read, it will see two reads,
60 * when the core only sees one. The FIFO receives the read which is cancelled,
61 * and not delivered to the core.
62 *
63 * To solve this, interrupts are turned off before reads occur to I/O space.
64 * There are 3 versions of all these functions
65 *  - turns interrupts off every read (higher overhead, but lower latency)
66 *  - turns interrupts off every loop (low overhead, but longer latency)
67 *  - DMA version, which do not suffer from this issue. DMA versions have
68 *      different name (prefixed by dma_ ), and are located in
69 *      ../kernel/bfin_dma_5xx.c
70 * Using the dma related functions are recommended for transfering large
71 * buffers in/out of FIFOs.
72 */
73
74#define COMMON_INS(func, ops) \
75ENTRY(_ins##func) \
76	P0 = R0;	/* P0 = port */ \
77	CLI_OUTER;	/* 3 instructions before first read access */ \
78	P1 = R1;	/* P1 = address */ \
79	P2 = R2;	/* P2 = count */ \
80	SSYNC; \
81 \
82	LSETUP(1f, 2f) LC0 = P2; \
83	CLI_INNER; \
84	ops; \
85	STI_INNER; \
86 \
87	STI_OUTER; \
88	RTS; \
89ENDPROC(_ins##func)
90
91COMMON_INS(l, \
92	R0 = [P0]; \
93	[P1++] = R0; \
94)
95
96COMMON_INS(w, \
97	R0 = W[P0]; \
98	W[P1++] = R0; \
99)
100
101COMMON_INS(w_8, \
102	R0 = W[P0]; \
103	B[P1++] = R0; \
104	R0 = R0 >> 8; \
105	B[P1++] = R0; \
106)
107
108COMMON_INS(b, \
109	R0 = B[P0]; \
110	B[P1++] = R0; \
111)
112
113COMMON_INS(l_16, \
114	R0 = [P0]; \
115	W[P1++] = R0; \
116	R0 = R0 >> 16; \
117	W[P1++] = R0; \
118)
119