• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * File:         arch/blackfin/mach-common/entry.S
3 * Based on:
4 * Author:       Linus Torvalds
5 *
6 * Created:      ?
7 * Description:  contains the system-call and fault low-level handling routines.
8 *               This also contains the timer-interrupt handler, as well as all
9 *               interrupts and faults that can result in a task-switch.
10 *
11 * Modified:
12 *               Copyright 2004-2006 Analog Devices Inc.
13 *
14 * Bugs:         Enter bugs at http://blackfin.uclinux.org/
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, see the file COPYING, or write
28 * to the Free Software Foundation, Inc.,
29 * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
30 */
31
32/* NOTE: This code handles signal-recognition, which happens every time
33 * after a timer-interrupt and after each system call.
34 */
35
36#include <linux/init.h>
37#include <linux/linkage.h>
38#include <linux/unistd.h>
39#include <linux/threads.h>
40#include <asm/blackfin.h>
41#include <asm/errno.h>
42#include <asm/fixed_code.h>
43#include <asm/thread_info.h>  /* TIF_NEED_RESCHED */
44#include <asm/asm-offsets.h>
45#include <asm/trace.h>
46
47#include <asm/context.S>
48
49#if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
50# define EX_SCRATCH_REG RETN
51#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE)
52# define EX_SCRATCH_REG RETE
53#else
54# define EX_SCRATCH_REG CYCLES
55#endif
56
57#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
58.section .l1.text
59#else
60.text
61#endif
62
63/* Slightly simplified and streamlined entry point for CPLB misses.
64 * This one does not lower the level to IRQ5, and thus can be used to
65 * patch up CPLB misses on the kernel stack.
66 */
67#if ANOMALY_05000261
68#define _ex_dviol _ex_workaround_261
69#define _ex_dmiss _ex_workaround_261
70#define _ex_dmult _ex_workaround_261
71
72ENTRY(_ex_workaround_261)
73	/*
74	 * Work around an anomaly: if we see a new DCPLB fault, return
75	 * without doing anything.  Then, if we get the same fault again,
76	 * handle it.
77	 */
78	P4 = R7;	/* Store EXCAUSE */
79
80	GET_PDA(p5, r7);
81	r7 = [p5 + PDA_LFRETX];
82	r6 = retx;
83	[p5 + PDA_LFRETX] = r6;
84	cc = r6 == r7;
85	if !cc jump _bfin_return_from_exception;
86	/* fall through */
87	R7 = P4;
88	R6 = 0x26;	/* Data CPLB Miss */
89	cc = R6 == R7;
90	if cc jump _ex_dcplb_miss (BP);
91	R6 = 0x23;	/* Data CPLB Miss */
92	cc = R6 == R7;
93	if cc jump _ex_dcplb_viol (BP);
94	/* Handle 0x23 Data CPLB Protection Violation
95	 * and Data CPLB Multiple Hits - Linux Trap Zero
96	 */
97	jump _ex_trap_c;
98ENDPROC(_ex_workaround_261)
99
100#else
101#ifdef CONFIG_MPU
102#define _ex_dviol _ex_dcplb_viol
103#else
104#define _ex_dviol _ex_trap_c
105#endif
106#define _ex_dmiss _ex_dcplb_miss
107#define _ex_dmult _ex_trap_c
108#endif
109
110
111ENTRY(_ex_dcplb_viol)
112ENTRY(_ex_dcplb_miss)
113ENTRY(_ex_icplb_miss)
114	(R7:6,P5:4) = [sp++];
115	/* We leave the previously pushed ASTAT on the stack.  */
116	SAVE_CONTEXT_CPLB
117
118	/* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that
119	 * will change the stack pointer.  */
120	R0 = SEQSTAT;
121	R1 = SP;
122
123	DEBUG_HWTRACE_SAVE(p5, r7)
124
125	sp += -12;
126	call _cplb_hdr;
127	sp += 12;
128	CC = R0 == 0;
129	IF !CC JUMP _handle_bad_cplb;
130
131#ifdef CONFIG_DEBUG_DOUBLEFAULT
132	/* While we were processing this, did we double fault? */
133	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
134	r6.l = lo(SEQSTAT_EXCAUSE);
135	r6.h = hi(SEQSTAT_EXCAUSE);
136	r7 = r7 & r6;
137	r6 = 0x25;
138	CC = R7 == R6;
139	if CC JUMP _double_fault;
140#endif
141
142	DEBUG_HWTRACE_RESTORE(p5, r7)
143	RESTORE_CONTEXT_CPLB
144	ASTAT = [SP++];
145	SP = EX_SCRATCH_REG;
146	rtx;
147ENDPROC(_ex_icplb_miss)
148
149ENTRY(_ex_syscall)
150	raise 15;		/* invoked by TRAP #0, for sys call */
151	jump.s _bfin_return_from_exception;
152ENDPROC(_ex_syscall)
153
154ENTRY(_ex_single_step)
155	/* If we just returned from an interrupt, the single step event is
156	   for the RTI instruction.  */
157	r7 = retx;
158	r6 = reti;
159	cc = r7 == r6;
160	if cc jump _bfin_return_from_exception;
161
162#ifdef CONFIG_KGDB
163	/* Don't do single step in hardware exception handler */
164        p5.l = lo(IPEND);
165        p5.h = hi(IPEND);
166	r6 = [p5];
167	cc = bittst(r6, 4);
168	if cc jump _bfin_return_from_exception;
169	cc = bittst(r6, 5);
170	if cc jump _bfin_return_from_exception;
171
172	/* skip single step if current interrupt priority is higher than
173	 * that of the first instruction, from which gdb starts single step */
174	r6 >>= 6;
175	r7 = 10;
176.Lfind_priority_start:
177	cc = bittst(r6, 0);
178	if cc jump .Lfind_priority_done;
179	r6 >>= 1;
180	r7 += -1;
181	cc = r7 == 0;
182	if cc jump .Lfind_priority_done;
183	jump.s .Lfind_priority_start;
184.Lfind_priority_done:
185	p4.l = _kgdb_single_step;
186	p4.h = _kgdb_single_step;
187	r6 = [p4];
188	cc = r6 == 0;
189	if cc jump .Ldo_single_step;
190	r6 += -1;
191	cc = r6 < r7;
192	if cc jump 1f;
193.Ldo_single_step:
194#else
195	/* If we were in user mode, do the single step normally.  */
196	p5.l = lo(IPEND);
197	p5.h = hi(IPEND);
198	r6 = [p5];
199	r7 = 0xffe0 (z);
200	r7 = r7 & r6;
201	cc = r7 == 0;
202	if !cc jump 1f;
203#endif
204
205	/* Single stepping only a single instruction, so clear the trace
206	 * bit here.  */
207	r7 = syscfg;
208	bitclr (r7, 0);
209	syscfg = R7;
210	jump _ex_trap_c;
211
2121:
213	/*
214	 * We were in an interrupt handler.  By convention, all of them save
215	 * SYSCFG with their first instruction, so by checking whether our
216	 * RETX points at the entry point, we can determine whether to allow
217	 * a single step, or whether to clear SYSCFG.
218	 *
219	 * First, find out the interrupt level and the event vector for it.
220	 */
221	p5.l = lo(EVT0);
222	p5.h = hi(EVT0);
223	p5 += -4;
2242:
225	r7 = rot r7 by -1;
226	p5 += 4;
227	if !cc jump 2b;
228
229	/* What we actually do is test for the _second_ instruction in the
230	 * IRQ handler.  That way, if there are insns following the restore
231	 * of SYSCFG after leaving the handler, we will not turn off SYSCFG
232	 * for them.  */
233
234	r7 = [p5];
235	r7 += 2;
236	r6 = RETX;
237	cc = R7 == R6;
238	if !cc jump _bfin_return_from_exception;
239
240	r7 = syscfg;
241	bitclr (r7, 0);
242	syscfg = R7;
243
244	/* Fall through to _bfin_return_from_exception.  */
245ENDPROC(_ex_single_step)
246
247ENTRY(_bfin_return_from_exception)
248#if ANOMALY_05000257
249	R7=LC0;
250	LC0=R7;
251	R7=LC1;
252	LC1=R7;
253#endif
254
255#ifdef CONFIG_DEBUG_DOUBLEFAULT
256	/* While we were processing the current exception,
257	 * did we cause another, and double fault?
258	 */
259	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
260	r6.l = lo(SEQSTAT_EXCAUSE);
261	r6.h = hi(SEQSTAT_EXCAUSE);
262	r7 = r7 & r6;
263	r6 = 0x25;
264	CC = R7 == R6;
265	if CC JUMP _double_fault;
266
267	/* Did we cause a HW error? */
268	p5.l = lo(ILAT);
269	p5.h = hi(ILAT);
270	r6 = [p5];
271	r7 = 0x20;		/* Did I just cause anther HW error? */
272	r6 = r7 & r6;
273	CC = R7 == R6;
274	if CC JUMP _double_fault;
275#endif
276
277	(R7:6,P5:4) = [sp++];
278	ASTAT = [sp++];
279	sp = EX_SCRATCH_REG;
280	rtx;
281ENDPROC(_bfin_return_from_exception)
282
283ENTRY(_handle_bad_cplb)
284	DEBUG_HWTRACE_RESTORE(p5, r7)
285	/* To get here, we just tried and failed to change a CPLB
286	 * so, handle things in trap_c (C code), by lowering to
287	 * IRQ5, just like we normally do. Since this is not a
288	 * "normal" return path, we have a do alot of stuff to
289	 * the stack to get ready so, we can fall through - we
290	 * need to make a CPLB exception look like a normal exception
291	 */
292	RESTORE_CONTEXT_CPLB
293	/* ASTAT is still on the stack, where it is needed.  */
294	[--sp] = (R7:6,P5:4);
295
296ENTRY(_ex_replaceable)
297	nop;
298
299ENTRY(_ex_trap_c)
300	/* Make sure we are not in a double fault */
301	p4.l = lo(IPEND);
302	p4.h = hi(IPEND);
303	r7 = [p4];
304	CC = BITTST (r7, 5);
305	if CC jump _double_fault;
306
307	/* Call C code (trap_c) to handle the exception, which most
308	 * likely involves sending a signal to the current process.
309	 * To avoid double faults, lower our priority to IRQ5 first.
310	 */
311	P5.h = _exception_to_level5;
312	P5.l = _exception_to_level5;
313	p4.l = lo(EVT5);
314	p4.h = hi(EVT5);
315	[p4] = p5;
316	csync;
317
318	GET_PDA(p5, r6);
319#ifndef CONFIG_DEBUG_DOUBLEFAULT
320
321	/*
322	 * Save these registers, as they are only valid in exception context
323	 *  (where we are now - as soon as we defer to IRQ5, they can change)
324	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
325	 * but they are not very interesting, so don't save them
326	 */
327
328	p4.l = lo(DCPLB_FAULT_ADDR);
329	p4.h = hi(DCPLB_FAULT_ADDR);
330	r7 = [p4];
331	[p5 + PDA_DCPLB] = r7;
332
333	p4.l = lo(ICPLB_FAULT_ADDR);
334	p4.h = hi(ICPLB_FAULT_ADDR);
335	r6 = [p4];
336	[p5 + PDA_ICPLB] = r6;
337
338	r6 = retx;
339	[p5 + PDA_RETX] = r6;
340#endif
341	r6 = SYSCFG;
342	[p5 + PDA_SYSCFG] = r6;
343	BITCLR(r6, 0);
344	SYSCFG = r6;
345
346	/* Disable all interrupts, but make sure level 5 is enabled so
347	 * we can switch to that level.  Save the old mask.  */
348	cli r6;
349	[p5 + PDA_EXIMASK] = r6;
350
351	p4.l = lo(SAFE_USER_INSTRUCTION);
352	p4.h = hi(SAFE_USER_INSTRUCTION);
353	retx = p4;
354
355	r6 = 0x3f;
356	sti r6;
357
358	raise 5;
359	jump.s _bfin_return_from_exception;
360ENDPROC(_ex_trap_c)
361
362/* We just realized we got an exception, while we were processing a different
363 * exception. This is a unrecoverable event, so crash.
364 * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
365 */
366_double_fault:
367	/* Turn caches & protection off, to ensure we don't get any more
368	 * double exceptions
369	 */
370
371	P4.L = LO(IMEM_CONTROL);
372	P4.H = HI(IMEM_CONTROL);
373
374	R5 = [P4];              /* Control Register*/
375	BITCLR(R5,ENICPLB_P);
376	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
377	.align 8;
378	[P4] = R5;
379	SSYNC;
380
381	P4.L = LO(DMEM_CONTROL);
382	P4.H = HI(DMEM_CONTROL);
383	R5 = [P4];
384	BITCLR(R5,ENDCPLB_P);
385	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
386	.align 8;
387	[P4] = R5;
388	SSYNC;
389
390	/* Fix up the stack */
391	(R7:6,P5:4) = [sp++];
392	ASTAT = [sp++];
393	SP = EX_SCRATCH_REG;
394
395	/* We should be out of the exception stack, and back down into
396	 * kernel or user space stack
397	 */
398	SAVE_ALL_SYS
399
400	/* The dumping functions expect the return address in the RETI
401	 * slot.  */
402	r6 = retx;
403	[sp + PT_PC] = r6;
404
405	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
406	SP += -12;
407	call _double_fault_c;
408	SP += 12;
409.L_double_fault_panic:
410        JUMP .L_double_fault_panic
411
412ENDPROC(_double_fault)
413
414ENTRY(_exception_to_level5)
415	SAVE_ALL_SYS
416
417	GET_PDA(p4, r7);        /* Fetch current PDA */
418	r6 = [p4 + PDA_RETX];
419	[sp + PT_PC] = r6;
420
421	r6 = [p4 + PDA_SYSCFG];
422	[sp + PT_SYSCFG] = r6;
423
424	/* Restore interrupt mask.  We haven't pushed RETI, so this
425	 * doesn't enable interrupts until we return from this handler.  */
426	r6 = [p4 + PDA_EXIMASK];
427	sti r6;
428
429	/* Restore the hardware error vector.  */
430	P5.h = _evt_ivhw;
431	P5.l = _evt_ivhw;
432	p4.l = lo(EVT5);
433	p4.h = hi(EVT5);
434	[p4] = p5;
435	csync;
436
437	p2.l = lo(IPEND);
438	p2.h = hi(IPEND);
439	csync;
440	r0 = [p2];              /* Read current IPEND */
441	[sp + PT_IPEND] = r0;   /* Store IPEND */
442
443	r0 = sp; 	/* stack frame pt_regs pointer argument ==> r0 */
444	SP += -12;
445	call _trap_c;
446	SP += 12;
447
448#ifdef CONFIG_DEBUG_DOUBLEFAULT
449	/* Grab ILAT */
450	p2.l = lo(ILAT);
451	p2.h = hi(ILAT);
452	r0 = [p2];
453	r1 = 0x20;  /* Did I just cause anther HW error? */
454	r0 = r0 & r1;
455	CC = R0 == R1;
456	if CC JUMP _double_fault;
457#endif
458
459	call _ret_from_exception;
460	RESTORE_ALL_SYS
461	rti;
462ENDPROC(_exception_to_level5)
463
464ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
465	/* Since the kernel stack can be anywhere, it's not guaranteed to be
466	 * covered by a CPLB.  Switch to an exception stack; use RETN as a
467	 * scratch register (for want of a better option).
468	 */
469	EX_SCRATCH_REG = sp;
470	GET_PDA_SAFE(sp);
471	sp = [sp + PDA_EXSTACK]
472	/* Try to deal with syscalls quickly.  */
473	[--sp] = ASTAT;
474	[--sp] = (R7:6,P5:4);
475
476#if ANOMALY_05000283 || ANOMALY_05000315
477	cc = r7 == r7;
478	p5.h = HI(CHIPID);
479	p5.l = LO(CHIPID);
480	if cc jump 1f;
481	r7.l = W[p5];
4821:
483#endif
484
485#ifdef CONFIG_DEBUG_DOUBLEFAULT
486	/*
487	 * Save these registers, as they are only valid in exception context
488	 * (where we are now - as soon as we defer to IRQ5, they can change)
489	 * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3,
490	 * but they are not very interesting, so don't save them
491	 */
492
493	GET_PDA(p5, r7);
494	p4.l = lo(DCPLB_FAULT_ADDR);
495	p4.h = hi(DCPLB_FAULT_ADDR);
496	r7 = [p4];
497	[p5 + PDA_DCPLB] = r7;
498
499	p4.l = lo(ICPLB_FAULT_ADDR);
500	p4.h = hi(ICPLB_FAULT_ADDR);
501	r7 = [p4];
502	[p5 + PDA_ICPLB] = r7;
503
504	r6 = retx;
505	[p5 + PDA_RETX] = r6;
506
507	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
508	[p5 + PDA_SEQSTAT] = r7;
509#else
510	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
511#endif
512	r6.l = lo(SEQSTAT_EXCAUSE);
513	r6.h = hi(SEQSTAT_EXCAUSE);
514	r7 = r7 & r6;
515	p5.h = _ex_table;
516	p5.l = _ex_table;
517	p4 = r7;
518	p5 = p5 + (p4 << 2);
519	p4 = [p5];
520	jump (p4);
521
522.Lbadsys:
523	r7 = -ENOSYS; 		/* signextending enough */
524	[sp + PT_R0] = r7;	/* return value from system call */
525	jump .Lsyscall_really_exit;
526ENDPROC(_trap)
527
528ENTRY(_kernel_execve)
529	link SIZEOF_PTREGS;
530	p0 = sp;
531	r3 = SIZEOF_PTREGS / 4;
532	r4 = 0(x);
533.Lclear_regs:
534	[p0++] = r4;
535	r3 += -1;
536	cc = r3 == 0;
537	if !cc jump .Lclear_regs (bp);
538
539	p0 = sp;
540	sp += -16;
541	[sp + 12] = p0;
542	call _do_execve;
543	SP += 16;
544	cc = r0 == 0;
545	if ! cc jump .Lexecve_failed;
546	/* Success.  Copy our temporary pt_regs to the top of the kernel
547	 * stack and do a normal exception return.
548	 */
549	r1 = sp;
550	r0 = (-KERNEL_STACK_SIZE) (x);
551	r1 = r1 & r0;
552	p2 = r1;
553	p3 = [p2];
554	r0 = KERNEL_STACK_SIZE - 4 (z);
555	p1 = r0;
556	p1 = p1 + p2;
557
558	p0 = fp;
559	r4 = [p0--];
560	r3 = SIZEOF_PTREGS / 4;
561.Lcopy_regs:
562	r4 = [p0--];
563	[p1--] = r4;
564	r3 += -1;
565	cc = r3 == 0;
566	if ! cc jump .Lcopy_regs (bp);
567
568	r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z);
569	p1 = r0;
570	p1 = p1 + p2;
571	sp = p1;
572	r0 = syscfg;
573	[SP + PT_SYSCFG] = r0;
574	[p3 + (TASK_THREAD + THREAD_KSP)] = sp;
575
576	RESTORE_CONTEXT;
577	rti;
578.Lexecve_failed:
579	unlink;
580	rts;
581ENDPROC(_kernel_execve)
582
583ENTRY(_system_call)
584	/* Store IPEND */
585	p2.l = lo(IPEND);
586	p2.h = hi(IPEND);
587	csync;
588	r0 = [p2];
589	[sp + PT_IPEND] = r0;
590
591	/* Store RETS for now */
592	r0 = rets;
593	[sp + PT_RESERVED] = r0;
594	/* Set the stack for the current process */
595	r7 = sp;
596	r6.l = lo(ALIGN_PAGE_MASK);
597	r6.h = hi(ALIGN_PAGE_MASK);
598	r7 = r7 & r6;  		/* thread_info */
599	p2 = r7;
600	p2 = [p2];
601
602	[p2+(TASK_THREAD+THREAD_KSP)] = sp;
603#ifdef CONFIG_IPIPE
604	r0 = sp;
605	SP += -12;
606	call ___ipipe_syscall_root;
607	SP += 12;
608	cc = r0 == 1;
609	if cc jump .Lsyscall_really_exit;
610	cc = r0 == -1;
611	if cc jump .Lresume_userspace;
612	r3 = [sp + PT_R3];
613	r4 = [sp + PT_R4];
614	p0 = [sp + PT_ORIG_P0];
615#endif /* CONFIG_IPIPE */
616
617	/* Check the System Call */
618	r7 = __NR_syscall;
619	/* System call number is passed in P0 */
620	r6 = p0;
621	cc = r6 < r7;
622	if ! cc jump .Lbadsys;
623
624	/* are we tracing syscalls?*/
625	r7 = sp;
626	r6.l = lo(ALIGN_PAGE_MASK);
627	r6.h = hi(ALIGN_PAGE_MASK);
628	r7 = r7 & r6;
629	p2 = r7;
630	r7 = [p2+TI_FLAGS];
631	CC = BITTST(r7,TIF_SYSCALL_TRACE);
632	if CC JUMP _sys_trace;
633
634	/* Execute the appropriate system call */
635
636	p4 = p0;
637	p5.l = _sys_call_table;
638	p5.h = _sys_call_table;
639	p5 = p5 + (p4 << 2);
640	r0 = [sp + PT_R0];
641	r1 = [sp + PT_R1];
642	r2 = [sp + PT_R2];
643	p5 = [p5];
644
645	[--sp] = r5;
646	[--sp] = r4;
647	[--sp] = r3;
648	SP += -12;
649	call (p5);
650	SP += 24;
651	[sp + PT_R0] = r0;
652
653.Lresume_userspace:
654	r7 = sp;
655	r4.l = lo(ALIGN_PAGE_MASK);
656	r4.h = hi(ALIGN_PAGE_MASK);
657	r7 = r7 & r4;		/* thread_info->flags */
658	p5 = r7;
659.Lresume_userspace_1:
660	/* Disable interrupts.  */
661	[--sp] = reti;
662	reti = [sp++];
663
664	r7 = [p5 + TI_FLAGS];
665	r4.l = lo(_TIF_WORK_MASK);
666	r4.h = hi(_TIF_WORK_MASK);
667	r7 =  r7 & r4;
668
669.Lsyscall_resched:
670#ifdef CONFIG_IPIPE
671	cc = BITTST(r7, TIF_IRQ_SYNC);
672	if !cc jump .Lsyscall_no_irqsync;
673	[--sp] = reti;
674	r0 = [sp++];
675	SP += -12;
676	call ___ipipe_sync_root;
677	SP += 12;
678	jump .Lresume_userspace_1;
679.Lsyscall_no_irqsync:
680#endif
681	cc = BITTST(r7, TIF_NEED_RESCHED);
682	if !cc jump .Lsyscall_sigpending;
683
684	/* Reenable interrupts.  */
685	[--sp] = reti;
686	r0 = [sp++];
687
688	SP += -12;
689	call _schedule;
690	SP += 12;
691
692	jump .Lresume_userspace_1;
693
694.Lsyscall_sigpending:
695	cc = BITTST(r7, TIF_RESTORE_SIGMASK);
696	if cc jump .Lsyscall_do_signals;
697	cc = BITTST(r7, TIF_SIGPENDING);
698	if !cc jump .Lsyscall_really_exit;
699.Lsyscall_do_signals:
700	/* Reenable interrupts.  */
701	[--sp] = reti;
702	r0 = [sp++];
703
704	r0 = sp;
705	SP += -12;
706	call _do_signal;
707	SP += 12;
708
709.Lsyscall_really_exit:
710	r5 = [sp + PT_RESERVED];
711	rets = r5;
712#ifdef CONFIG_IPIPE
713	[--sp] = reti;
714	r5 = [sp++];
715#endif /* CONFIG_IPIPE */
716	rts;
717ENDPROC(_system_call)
718
719/* Do not mark as ENTRY() to avoid error in assembler ...
720 * this symbol need not be global anyways, so ...
721 */
722_sys_trace:
723	call _syscall_trace;
724
725	/* Execute the appropriate system call */
726
727	p4 = [SP + PT_P0];
728	p5.l = _sys_call_table;
729	p5.h = _sys_call_table;
730	p5 = p5 + (p4 << 2);
731	r0 = [sp + PT_R0];
732	r1 = [sp + PT_R1];
733	r2 = [sp + PT_R2];
734	r3 = [sp + PT_R3];
735	r4 = [sp + PT_R4];
736	r5 = [sp + PT_R5];
737	p5 = [p5];
738
739	[--sp] = r5;
740	[--sp] = r4;
741	[--sp] = r3;
742	SP += -12;
743	call (p5);
744	SP += 24;
745	[sp + PT_R0] = r0;
746
747	call _syscall_trace;
748	jump .Lresume_userspace;
749ENDPROC(_sys_trace)
750
751ENTRY(_resume)
752	/*
753	 * Beware - when entering resume, prev (the current task) is
754	 * in r0, next (the new task) is in r1.
755	 */
756	p0 = r0;
757	p1 = r1;
758	[--sp] = rets;
759	[--sp] = fp;
760	[--sp] = (r7:4, p5:3);
761
762	/* save usp */
763	p2 = usp;
764	[p0+(TASK_THREAD+THREAD_USP)] = p2;
765
766	/* save current kernel stack pointer */
767	[p0+(TASK_THREAD+THREAD_KSP)] = sp;
768
769	/* save program counter */
770	r1.l = _new_old_task;
771	r1.h = _new_old_task;
772	[p0+(TASK_THREAD+THREAD_PC)] = r1;
773
774	/* restore the kernel stack pointer */
775	sp = [p1+(TASK_THREAD+THREAD_KSP)];
776
777	/* restore user stack pointer */
778	p0 = [p1+(TASK_THREAD+THREAD_USP)];
779	usp = p0;
780
781	/* restore pc */
782	p0 = [p1+(TASK_THREAD+THREAD_PC)];
783	jump (p0);
784
785	/*
786	 * Following code actually lands up in a new (old) task.
787	 */
788
789_new_old_task:
790	(r7:4, p5:3) = [sp++];
791	fp = [sp++];
792	rets = [sp++];
793
794	/*
795	 * When we come out of resume, r0 carries "old" task, becuase we are
796	 * in "new" task.
797	 */
798	rts;
799ENDPROC(_resume)
800
801ENTRY(_ret_from_exception)
802#ifdef CONFIG_IPIPE
803	[--sp] = rets;
804	SP += -12;
805	call ___ipipe_check_root
806	SP += 12
807	rets = [sp++];
808	cc = r0 == 0;
809	if cc jump 4f;                /* not on behalf of Linux, get out */
810#endif /* CONFIG_IPIPE */
811	p2.l = lo(IPEND);
812	p2.h = hi(IPEND);
813
814	csync;
815	r0 = [p2];
816	[sp + PT_IPEND] = r0;
817
8181:
819	r2 = LO(~0x37) (Z);
820	r0 = r2 & r0;
821	cc = r0 == 0;
822	if !cc jump 4f;	/* if not return to user mode, get out */
823
824	/* Make sure any pending system call or deferred exception
825	 * return in ILAT for this process to get executed, otherwise
826	 * in case context switch happens, system call of
827	 * first process (i.e in ILAT) will be carried
828	 * forward to the switched process
829	 */
830
831	p2.l = lo(ILAT);
832	p2.h = hi(ILAT);
833	r0 = [p2];
834	r1 = (EVT_IVG14 | EVT_IVG15) (z);
835	r0 = r0 & r1;
836	cc = r0 == 0;
837	if !cc jump 5f;
838
839	/* Set the stack for the current process */
840	r7 = sp;
841	r4.l = lo(ALIGN_PAGE_MASK);
842	r4.h = hi(ALIGN_PAGE_MASK);
843	r7 = r7 & r4;		/* thread_info->flags */
844	p5 = r7;
845	r7 = [p5 + TI_FLAGS];
846	r4.l = lo(_TIF_WORK_MASK);
847	r4.h = hi(_TIF_WORK_MASK);
848	r7 =  r7 & r4;
849	cc = r7 == 0;
850	if cc jump 4f;
851
852	p0.l = lo(EVT15);
853	p0.h = hi(EVT15);
854	p1.l = _schedule_and_signal;
855	p1.h = _schedule_and_signal;
856	[p0] = p1;
857	csync;
858	raise 15;		/* raise evt14 to do signal or reschedule */
8594:
860	r0 = syscfg;
861	bitclr(r0, 0);
862	syscfg = r0;
8635:
864	rts;
865ENDPROC(_ret_from_exception)
866
867#ifdef CONFIG_IPIPE
868
869_sync_root_irqs:
870	[--sp] = reti;		/* Reenable interrupts */
871	r0 = [sp++];
872	jump.l ___ipipe_sync_root
873
874_resume_kernel_from_int:
875	r0.l = _sync_root_irqs
876	r0.h = _sync_root_irqs
877	[--sp] = rets;
878	[--sp] = ( r7:4, p5:3 );
879	SP += -12;
880	call ___ipipe_call_irqtail
881	SP += 12;
882	( r7:4, p5:3 ) = [sp++];
883	rets = [sp++];
884	rts
885#else
886#define _resume_kernel_from_int	 2f
887#endif
888
889ENTRY(_return_from_int)
890	/* If someone else already raised IRQ 15, do nothing.  */
891	csync;
892	p2.l = lo(ILAT);
893	p2.h = hi(ILAT);
894	r0 = [p2];
895	cc = bittst (r0, EVT_IVG15_P);
896	if cc jump 2f;
897
898	/* if not return to user mode, get out */
899	p2.l = lo(IPEND);
900	p2.h = hi(IPEND);
901	r0 = [p2];
902	r1 = 0x17(Z);
903	r2 = ~r1;
904	r2.h = 0;
905	r0 = r2 & r0;
906	r1 = 1;
907	r1 = r0 - r1;
908	r2 = r0 & r1;
909	cc = r2 == 0;
910	if !cc jump _resume_kernel_from_int;
911
912	/* Lower the interrupt level to 15.  */
913	p0.l = lo(EVT15);
914	p0.h = hi(EVT15);
915	p1.l = _schedule_and_signal_from_int;
916	p1.h = _schedule_and_signal_from_int;
917	[p0] = p1;
918	csync;
919#if ANOMALY_05000281
920	r0.l = lo(SAFE_USER_INSTRUCTION);
921	r0.h = hi(SAFE_USER_INSTRUCTION);
922	reti = r0;
923#endif
924	r0 = 0x801f (z);
925	STI r0;
926	raise 15;	/* raise evt15 to do signal or reschedule */
927	rti;
9282:
929	rts;
930ENDPROC(_return_from_int)
931
932ENTRY(_lower_to_irq14)
933#if ANOMALY_05000281
934	r0.l = lo(SAFE_USER_INSTRUCTION);
935	r0.h = hi(SAFE_USER_INSTRUCTION);
936	reti = r0;
937#endif
938	r0 = 0x401f;
939	sti r0;
940	raise 14;
941	rti;
942ENTRY(_evt14_softirq)
943#ifdef CONFIG_DEBUG_HWERR
944	r0 = 0x3f;
945	sti r0;
946#else
947	cli r0;
948#endif
949	[--sp] = RETI;
950	SP += 4;
951	rts;
952
953_schedule_and_signal_from_int:
954	/* To end up here, vector 15 was changed - so we have to change it
955	 * back.
956	 */
957	p0.l = lo(EVT15);
958	p0.h = hi(EVT15);
959	p1.l = _evt_system_call;
960	p1.h = _evt_system_call;
961	[p0] = p1;
962	csync;
963
964	/* Set orig_p0 to -1 to indicate this isn't the end of a syscall.  */
965	r0 = -1 (x);
966	[sp + PT_ORIG_P0] = r0;
967
968	p1 = rets;
969	[sp + PT_RESERVED] = p1;
970
971#ifdef CONFIG_SMP
972	GET_PDA(p0, r0); 	/* Fetch current PDA (can't migrate to other CPU here) */
973	r0 = [p0 + PDA_IRQFLAGS];
974#else
975	p0.l = _bfin_irq_flags;
976	p0.h = _bfin_irq_flags;
977	r0 = [p0];
978#endif
979	sti r0;
980
981	r0 = sp;
982	sp += -12;
983	call _finish_atomic_sections;
984	sp += 12;
985	jump.s .Lresume_userspace;
986
987_schedule_and_signal:
988	SAVE_CONTEXT_SYSCALL
989	/* To end up here, vector 15 was changed - so we have to change it
990	 * back.
991	 */
992	p0.l = lo(EVT15);
993	p0.h = hi(EVT15);
994	p1.l = _evt_system_call;
995	p1.h = _evt_system_call;
996	[p0] = p1;
997	csync;
998	p0.l = 1f;
999	p0.h = 1f;
1000	[sp + PT_RESERVED] = P0;
1001	call .Lresume_userspace;
10021:
1003	RESTORE_CONTEXT
1004	rti;
1005ENDPROC(_lower_to_irq14)
1006
1007/* We handle this 100% in exception space - to reduce overhead
1008 * Only potiential problem is if the software buffer gets swapped out of the
1009 * CPLB table - then double fault. - so we don't let this happen in other places
1010 */
1011#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
1012ENTRY(_ex_trace_buff_full)
1013	[--sp] = P3;
1014	[--sp] = P2;
1015	[--sp] = LC0;
1016	[--sp] = LT0;
1017	[--sp] = LB0;
1018	P5.L = _trace_buff_offset;
1019	P5.H = _trace_buff_offset;
1020	P3 = [P5];              /* trace_buff_offset */
1021	P5.L = lo(TBUFSTAT);
1022	P5.H = hi(TBUFSTAT);
1023	R7 = [P5];
1024	R7 <<= 1;               /* double, since we need to read twice */
1025	LC0 = R7;
1026	R7 <<= 2;               /* need to shift over again,
1027				 * to get the number of bytes */
1028	P5.L = lo(TBUF);
1029	P5.H = hi(TBUF);
1030	R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1;
1031
1032	P2 = R7;
1033	P3 = P3 + P2;
1034	R7 = P3;
1035	R7 = R7 & R6;
1036	P3 = R7;
1037	P2.L = _trace_buff_offset;
1038	P2.H = _trace_buff_offset;
1039	[P2] = P3;
1040
1041	P2.L = _software_trace_buff;
1042	P2.H = _software_trace_buff;
1043
1044	LSETUP (.Lstart, .Lend) LC0;
1045.Lstart:
1046	R7 = [P5];      /* read TBUF */
1047	P4 = P3 + P2;
1048	[P4] = R7;
1049	P3 += -4;
1050	R7 = P3;
1051	R7 = R7 & R6;
1052.Lend:
1053	P3 = R7;
1054
1055	LB0 = [sp++];
1056	LT0 = [sp++];
1057	LC0 = [sp++];
1058	P2 = [sp++];
1059	P3 = [sp++];
1060	jump _bfin_return_from_exception;
1061ENDPROC(_ex_trace_buff_full)
1062
1063#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4
1064.data
1065#else
1066.section .l1.data.B
1067#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */
1068ENTRY(_trace_buff_offset)
1069        .long 0;
1070ALIGN
1071ENTRY(_software_trace_buff)
1072	.rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256);
1073	.long 0
1074	.endr
1075#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */
1076
1077#if CONFIG_EARLY_PRINTK
1078__INIT
1079ENTRY(_early_trap)
1080	SAVE_ALL_SYS
1081	trace_buffer_stop(p0,r0);
1082
1083#if ANOMALY_05000283 || ANOMALY_05000315
1084	cc = r5 == r5;
1085	p4.h = HI(CHIPID);
1086	p4.l = LO(CHIPID);
1087	if cc jump 1f;
1088	r5.l = W[p4];
10891:
1090#endif
1091
1092	/* Turn caches off, to ensure we don't get double exceptions */
1093
1094	P4.L = LO(IMEM_CONTROL);
1095	P4.H = HI(IMEM_CONTROL);
1096
1097	R5 = [P4];              /* Control Register*/
1098	BITCLR(R5,ENICPLB_P);
1099	CLI R1;
1100	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
1101	.align 8;
1102	[P4] = R5;
1103	SSYNC;
1104
1105	P4.L = LO(DMEM_CONTROL);
1106	P4.H = HI(DMEM_CONTROL);
1107	R5 = [P4];
1108	BITCLR(R5,ENDCPLB_P);
1109	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
1110	.align 8;
1111	[P4] = R5;
1112	SSYNC;
1113	STI R1;
1114
1115	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
1116	r1 = RETX;
1117
1118	SP += -12;
1119	call _early_trap_c;
1120	SP += 12;
1121ENDPROC(_early_trap)
1122__FINIT
1123#endif /* CONFIG_EARLY_PRINTK */
1124
1125/*
1126 * Put these in the kernel data section - that should always be covered by
1127 * a CPLB. This is needed to ensure we don't get double fault conditions
1128 */
1129
1130#ifdef CONFIG_SYSCALL_TAB_L1
1131.section .l1.data
1132#else
1133.data
1134#endif
1135
1136ENTRY(_ex_table)
1137	/* entry for each EXCAUSE[5:0]
1138	 * This table must be in sync with the table in ./kernel/traps.c
1139	 * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
1140	 */
1141	.long _ex_syscall       /* 0x00 - User Defined - Linux Syscall */
1142	.long _ex_trap_c        /* 0x01 - User Defined - Software breakpoint */
1143#ifdef	CONFIG_KGDB
1144	.long _ex_trap_c	/* 0x02 - User Defined - KGDB initial connection
1145							 and break signal trap */
1146#else
1147	.long _ex_replaceable   /* 0x02 - User Defined */
1148#endif
1149	.long _ex_trap_c        /* 0x03 - User Defined - userspace stack overflow */
1150	.long _ex_trap_c        /* 0x04 - User Defined - dump trace buffer */
1151	.long _ex_replaceable   /* 0x05 - User Defined */
1152	.long _ex_replaceable   /* 0x06 - User Defined */
1153	.long _ex_replaceable   /* 0x07 - User Defined */
1154	.long _ex_replaceable   /* 0x08 - User Defined */
1155	.long _ex_replaceable   /* 0x09 - User Defined */
1156	.long _ex_replaceable   /* 0x0A - User Defined */
1157	.long _ex_replaceable   /* 0x0B - User Defined */
1158	.long _ex_replaceable   /* 0x0C - User Defined */
1159	.long _ex_replaceable   /* 0x0D - User Defined */
1160	.long _ex_replaceable   /* 0x0E - User Defined */
1161	.long _ex_replaceable   /* 0x0F - User Defined */
1162	.long _ex_single_step   /* 0x10 - HW Single step */
1163#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
1164	.long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */
1165#else
1166	.long _ex_trap_c        /* 0x11 - Trace Buffer Full */
1167#endif
1168	.long _ex_trap_c        /* 0x12 - Reserved */
1169	.long _ex_trap_c        /* 0x13 - Reserved */
1170	.long _ex_trap_c        /* 0x14 - Reserved */
1171	.long _ex_trap_c        /* 0x15 - Reserved */
1172	.long _ex_trap_c        /* 0x16 - Reserved */
1173	.long _ex_trap_c        /* 0x17 - Reserved */
1174	.long _ex_trap_c        /* 0x18 - Reserved */
1175	.long _ex_trap_c        /* 0x19 - Reserved */
1176	.long _ex_trap_c        /* 0x1A - Reserved */
1177	.long _ex_trap_c        /* 0x1B - Reserved */
1178	.long _ex_trap_c        /* 0x1C - Reserved */
1179	.long _ex_trap_c        /* 0x1D - Reserved */
1180	.long _ex_trap_c        /* 0x1E - Reserved */
1181	.long _ex_trap_c        /* 0x1F - Reserved */
1182	.long _ex_trap_c        /* 0x20 - Reserved */
1183	.long _ex_trap_c        /* 0x21 - Undefined Instruction */
1184	.long _ex_trap_c        /* 0x22 - Illegal Instruction Combination */
1185	.long _ex_dviol         /* 0x23 - Data CPLB Protection Violation */
1186	.long _ex_trap_c        /* 0x24 - Data access misaligned */
1187	.long _ex_trap_c        /* 0x25 - Unrecoverable Event */
1188	.long _ex_dmiss         /* 0x26 - Data CPLB Miss */
1189	.long _ex_dmult         /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */
1190	.long _ex_trap_c        /* 0x28 - Emulation Watchpoint */
1191	.long _ex_trap_c        /* 0x29 - Instruction fetch access error (535 only) */
1192	.long _ex_trap_c        /* 0x2A - Instruction fetch misaligned */
1193	.long _ex_trap_c        /* 0x2B - Instruction CPLB protection Violation */
1194	.long _ex_icplb_miss    /* 0x2C - Instruction CPLB miss */
1195	.long _ex_trap_c        /* 0x2D - Instruction CPLB Multiple Hits */
1196	.long _ex_trap_c        /* 0x2E - Illegal use of Supervisor Resource */
1197	.long _ex_trap_c        /* 0x2E - Illegal use of Supervisor Resource */
1198	.long _ex_trap_c        /* 0x2F - Reserved */
1199	.long _ex_trap_c        /* 0x30 - Reserved */
1200	.long _ex_trap_c        /* 0x31 - Reserved */
1201	.long _ex_trap_c        /* 0x32 - Reserved */
1202	.long _ex_trap_c        /* 0x33 - Reserved */
1203	.long _ex_trap_c        /* 0x34 - Reserved */
1204	.long _ex_trap_c        /* 0x35 - Reserved */
1205	.long _ex_trap_c        /* 0x36 - Reserved */
1206	.long _ex_trap_c        /* 0x37 - Reserved */
1207	.long _ex_trap_c        /* 0x38 - Reserved */
1208	.long _ex_trap_c        /* 0x39 - Reserved */
1209	.long _ex_trap_c        /* 0x3A - Reserved */
1210	.long _ex_trap_c        /* 0x3B - Reserved */
1211	.long _ex_trap_c        /* 0x3C - Reserved */
1212	.long _ex_trap_c        /* 0x3D - Reserved */
1213	.long _ex_trap_c        /* 0x3E - Reserved */
1214	.long _ex_trap_c        /* 0x3F - Reserved */
1215END(_ex_table)
1216
1217ENTRY(_sys_call_table)
1218	.long _sys_restart_syscall	/* 0 */
1219	.long _sys_exit
1220	.long _sys_fork
1221	.long _sys_read
1222	.long _sys_write
1223	.long _sys_open		/* 5 */
1224	.long _sys_close
1225	.long _sys_ni_syscall	/* old waitpid */
1226	.long _sys_creat
1227	.long _sys_link
1228	.long _sys_unlink	/* 10 */
1229	.long _sys_execve
1230	.long _sys_chdir
1231	.long _sys_time
1232	.long _sys_mknod
1233	.long _sys_chmod		/* 15 */
1234	.long _sys_chown	/* chown16 */
1235	.long _sys_ni_syscall	/* old break syscall holder */
1236	.long _sys_ni_syscall	/* old stat */
1237	.long _sys_lseek
1238	.long _sys_getpid	/* 20 */
1239	.long _sys_mount
1240	.long _sys_ni_syscall	/* old umount */
1241	.long _sys_setuid
1242	.long _sys_getuid
1243	.long _sys_stime		/* 25 */
1244	.long _sys_ptrace
1245	.long _sys_alarm
1246	.long _sys_ni_syscall	/* old fstat */
1247	.long _sys_pause
1248	.long _sys_ni_syscall	/* old utime */ /* 30 */
1249	.long _sys_ni_syscall	/* old stty syscall holder */
1250	.long _sys_ni_syscall	/* old gtty syscall holder */
1251	.long _sys_access
1252	.long _sys_nice
1253	.long _sys_ni_syscall	/* 35 */ /* old ftime syscall holder */
1254	.long _sys_sync
1255	.long _sys_kill
1256	.long _sys_rename
1257	.long _sys_mkdir
1258	.long _sys_rmdir		/* 40 */
1259	.long _sys_dup
1260	.long _sys_pipe
1261	.long _sys_times
1262	.long _sys_ni_syscall	/* old prof syscall holder */
1263	.long _sys_brk		/* 45 */
1264	.long _sys_setgid
1265	.long _sys_getgid
1266	.long _sys_ni_syscall	/* old sys_signal */
1267	.long _sys_geteuid	/* geteuid16 */
1268	.long _sys_getegid	/* getegid16 */	/* 50 */
1269	.long _sys_acct
1270	.long _sys_umount	/* recycled never used phys() */
1271	.long _sys_ni_syscall	/* old lock syscall holder */
1272	.long _sys_ioctl
1273	.long _sys_fcntl		/* 55 */
1274	.long _sys_ni_syscall	/* old mpx syscall holder */
1275	.long _sys_setpgid
1276	.long _sys_ni_syscall	/* old ulimit syscall holder */
1277	.long _sys_ni_syscall	/* old old uname */
1278	.long _sys_umask		/* 60 */
1279	.long _sys_chroot
1280	.long _sys_ustat
1281	.long _sys_dup2
1282	.long _sys_getppid
1283	.long _sys_getpgrp	/* 65 */
1284	.long _sys_setsid
1285	.long _sys_ni_syscall	/* old sys_sigaction */
1286	.long _sys_sgetmask
1287	.long _sys_ssetmask
1288	.long _sys_setreuid	/* setreuid16 */	/* 70 */
1289	.long _sys_setregid	/* setregid16 */
1290	.long _sys_ni_syscall	/* old sys_sigsuspend */
1291	.long _sys_ni_syscall	/* old sys_sigpending */
1292	.long _sys_sethostname
1293	.long _sys_setrlimit	/* 75 */
1294	.long _sys_ni_syscall	/* old getrlimit */
1295	.long _sys_getrusage
1296	.long _sys_gettimeofday
1297	.long _sys_settimeofday
1298	.long _sys_getgroups	/* getgroups16 */	/* 80 */
1299	.long _sys_setgroups	/* setgroups16 */
1300	.long _sys_ni_syscall	/* old_select */
1301	.long _sys_symlink
1302	.long _sys_ni_syscall	/* old lstat */
1303	.long _sys_readlink	/* 85 */
1304	.long _sys_uselib
1305	.long _sys_ni_syscall	/* sys_swapon */
1306	.long _sys_reboot
1307	.long _sys_ni_syscall	/* old_readdir */
1308	.long _sys_ni_syscall	/* sys_mmap */	/* 90 */
1309	.long _sys_munmap
1310	.long _sys_truncate
1311	.long _sys_ftruncate
1312	.long _sys_fchmod
1313	.long _sys_fchown	/* fchown16 */	/* 95 */
1314	.long _sys_getpriority
1315	.long _sys_setpriority
1316	.long _sys_ni_syscall	/* old profil syscall holder */
1317	.long _sys_statfs
1318	.long _sys_fstatfs	/* 100 */
1319	.long _sys_ni_syscall
1320	.long _sys_ni_syscall	/* old sys_socketcall */
1321	.long _sys_syslog
1322	.long _sys_setitimer
1323	.long _sys_getitimer	/* 105 */
1324	.long _sys_newstat
1325	.long _sys_newlstat
1326	.long _sys_newfstat
1327	.long _sys_ni_syscall	/* old uname */
1328	.long _sys_ni_syscall	/* iopl for i386 */ /* 110 */
1329	.long _sys_vhangup
1330	.long _sys_ni_syscall	/* obsolete idle() syscall */
1331	.long _sys_ni_syscall	/* vm86old for i386 */
1332	.long _sys_wait4
1333	.long _sys_ni_syscall	/* 115 */ /* sys_swapoff */
1334	.long _sys_sysinfo
1335	.long _sys_ni_syscall	/* old sys_ipc */
1336	.long _sys_fsync
1337	.long _sys_ni_syscall	/* old sys_sigreturn */
1338	.long _sys_clone		/* 120 */
1339	.long _sys_setdomainname
1340	.long _sys_newuname
1341	.long _sys_ni_syscall	/* old sys_modify_ldt */
1342	.long _sys_adjtimex
1343	.long _sys_ni_syscall	/* 125 */ /* sys_mprotect */
1344	.long _sys_ni_syscall	/* old sys_sigprocmask */
1345	.long _sys_ni_syscall	/* old "creat_module" */
1346	.long _sys_init_module
1347	.long _sys_delete_module
1348	.long _sys_ni_syscall	/* 130: old "get_kernel_syms" */
1349	.long _sys_quotactl
1350	.long _sys_getpgid
1351	.long _sys_fchdir
1352	.long _sys_bdflush
1353	.long _sys_ni_syscall	/* 135 */ /* sys_sysfs */
1354	.long _sys_personality
1355	.long _sys_ni_syscall	/* for afs_syscall */
1356	.long _sys_setfsuid	/* setfsuid16 */
1357	.long _sys_setfsgid	/* setfsgid16 */
1358	.long _sys_llseek	/* 140 */
1359	.long _sys_getdents
1360	.long _sys_ni_syscall	/* sys_select */
1361	.long _sys_flock
1362	.long _sys_ni_syscall	/* sys_msync */
1363	.long _sys_readv		/* 145 */
1364	.long _sys_writev
1365	.long _sys_getsid
1366	.long _sys_fdatasync
1367	.long _sys_sysctl
1368	.long _sys_ni_syscall	/* 150 */ /* sys_mlock */
1369	.long _sys_ni_syscall	/* sys_munlock */
1370	.long _sys_ni_syscall	/* sys_mlockall */
1371	.long _sys_ni_syscall	/* sys_munlockall */
1372	.long _sys_sched_setparam
1373	.long _sys_sched_getparam /* 155 */
1374	.long _sys_sched_setscheduler
1375	.long _sys_sched_getscheduler
1376	.long _sys_sched_yield
1377	.long _sys_sched_get_priority_max
1378	.long _sys_sched_get_priority_min  /* 160 */
1379	.long _sys_sched_rr_get_interval
1380	.long _sys_nanosleep
1381	.long _sys_mremap
1382	.long _sys_setresuid	/* setresuid16 */
1383	.long _sys_getresuid	/* getresuid16 */	/* 165 */
1384	.long _sys_ni_syscall	/* for vm86 */
1385	.long _sys_ni_syscall	/* old "query_module" */
1386	.long _sys_ni_syscall	/* sys_poll */
1387	.long _sys_nfsservctl
1388	.long _sys_setresgid	/* setresgid16 */	/* 170 */
1389	.long _sys_getresgid	/* getresgid16 */
1390	.long _sys_prctl
1391	.long _sys_rt_sigreturn
1392	.long _sys_rt_sigaction
1393	.long _sys_rt_sigprocmask /* 175 */
1394	.long _sys_rt_sigpending
1395	.long _sys_rt_sigtimedwait
1396	.long _sys_rt_sigqueueinfo
1397	.long _sys_rt_sigsuspend
1398	.long _sys_pread64	/* 180 */
1399	.long _sys_pwrite64
1400	.long _sys_lchown	/* lchown16 */
1401	.long _sys_getcwd
1402	.long _sys_capget
1403	.long _sys_capset	/* 185 */
1404	.long _sys_sigaltstack
1405	.long _sys_sendfile
1406	.long _sys_ni_syscall	/* streams1 */
1407	.long _sys_ni_syscall	/* streams2 */
1408	.long _sys_vfork		/* 190 */
1409	.long _sys_getrlimit
1410	.long _sys_mmap2
1411	.long _sys_truncate64
1412	.long _sys_ftruncate64
1413	.long _sys_stat64	/* 195 */
1414	.long _sys_lstat64
1415	.long _sys_fstat64
1416	.long _sys_chown
1417	.long _sys_getuid
1418	.long _sys_getgid	/* 200 */
1419	.long _sys_geteuid
1420	.long _sys_getegid
1421	.long _sys_setreuid
1422	.long _sys_setregid
1423	.long _sys_getgroups	/* 205 */
1424	.long _sys_setgroups
1425	.long _sys_fchown
1426	.long _sys_setresuid
1427	.long _sys_getresuid
1428	.long _sys_setresgid	/* 210 */
1429	.long _sys_getresgid
1430	.long _sys_lchown
1431	.long _sys_setuid
1432	.long _sys_setgid
1433	.long _sys_setfsuid	/* 215 */
1434	.long _sys_setfsgid
1435	.long _sys_pivot_root
1436	.long _sys_ni_syscall	/* sys_mincore */
1437	.long _sys_ni_syscall	/* sys_madvise */
1438	.long _sys_getdents64	/* 220 */
1439	.long _sys_fcntl64
1440	.long _sys_ni_syscall	/* reserved for TUX */
1441	.long _sys_ni_syscall
1442	.long _sys_gettid
1443	.long _sys_readahead	/* 225 */
1444	.long _sys_setxattr
1445	.long _sys_lsetxattr
1446	.long _sys_fsetxattr
1447	.long _sys_getxattr
1448	.long _sys_lgetxattr	/* 230 */
1449	.long _sys_fgetxattr
1450	.long _sys_listxattr
1451	.long _sys_llistxattr
1452	.long _sys_flistxattr
1453	.long _sys_removexattr	/* 235 */
1454	.long _sys_lremovexattr
1455	.long _sys_fremovexattr
1456	.long _sys_tkill
1457	.long _sys_sendfile64
1458	.long _sys_futex		/* 240 */
1459	.long _sys_sched_setaffinity
1460	.long _sys_sched_getaffinity
1461	.long _sys_ni_syscall	/* sys_set_thread_area */
1462	.long _sys_ni_syscall	/* sys_get_thread_area */
1463	.long _sys_io_setup	/* 245 */
1464	.long _sys_io_destroy
1465	.long _sys_io_getevents
1466	.long _sys_io_submit
1467	.long _sys_io_cancel
1468	.long _sys_ni_syscall	/* 250 */ /* sys_alloc_hugepages */
1469	.long _sys_ni_syscall	/* sys_freec_hugepages */
1470	.long _sys_exit_group
1471	.long _sys_lookup_dcookie
1472	.long _sys_bfin_spinlock
1473	.long _sys_epoll_create	/* 255 */
1474	.long _sys_epoll_ctl
1475	.long _sys_epoll_wait
1476	.long _sys_ni_syscall /* remap_file_pages */
1477	.long _sys_set_tid_address
1478	.long _sys_timer_create	/* 260 */
1479	.long _sys_timer_settime
1480	.long _sys_timer_gettime
1481	.long _sys_timer_getoverrun
1482	.long _sys_timer_delete
1483	.long _sys_clock_settime /* 265 */
1484	.long _sys_clock_gettime
1485	.long _sys_clock_getres
1486	.long _sys_clock_nanosleep
1487	.long _sys_statfs64
1488	.long _sys_fstatfs64	/* 270 */
1489	.long _sys_tgkill
1490	.long _sys_utimes
1491	.long _sys_fadvise64_64
1492	.long _sys_ni_syscall /* vserver */
1493	.long _sys_ni_syscall /* 275, mbind */
1494	.long _sys_ni_syscall /* get_mempolicy */
1495	.long _sys_ni_syscall /* set_mempolicy */
1496	.long _sys_mq_open
1497	.long _sys_mq_unlink
1498	.long _sys_mq_timedsend	/* 280 */
1499	.long _sys_mq_timedreceive
1500	.long _sys_mq_notify
1501	.long _sys_mq_getsetattr
1502	.long _sys_ni_syscall /* kexec_load */
1503	.long _sys_waitid	/* 285 */
1504	.long _sys_add_key
1505	.long _sys_request_key
1506	.long _sys_keyctl
1507	.long _sys_ioprio_set
1508	.long _sys_ioprio_get	/* 290 */
1509	.long _sys_inotify_init
1510	.long _sys_inotify_add_watch
1511	.long _sys_inotify_rm_watch
1512	.long _sys_ni_syscall /* migrate_pages */
1513	.long _sys_openat	/* 295 */
1514	.long _sys_mkdirat
1515	.long _sys_mknodat
1516	.long _sys_fchownat
1517	.long _sys_futimesat
1518	.long _sys_fstatat64	/* 300 */
1519	.long _sys_unlinkat
1520	.long _sys_renameat
1521	.long _sys_linkat
1522	.long _sys_symlinkat
1523	.long _sys_readlinkat	/* 305 */
1524	.long _sys_fchmodat
1525	.long _sys_faccessat
1526	.long _sys_pselect6
1527	.long _sys_ppoll
1528	.long _sys_unshare	/* 310 */
1529	.long _sys_sram_alloc
1530	.long _sys_sram_free
1531	.long _sys_dma_memcpy
1532	.long _sys_accept
1533	.long _sys_bind		/* 315 */
1534	.long _sys_connect
1535	.long _sys_getpeername
1536	.long _sys_getsockname
1537	.long _sys_getsockopt
1538	.long _sys_listen	/* 320 */
1539	.long _sys_recv
1540	.long _sys_recvfrom
1541	.long _sys_recvmsg
1542	.long _sys_send
1543	.long _sys_sendmsg	/* 325 */
1544	.long _sys_sendto
1545	.long _sys_setsockopt
1546	.long _sys_shutdown
1547	.long _sys_socket
1548	.long _sys_socketpair	/* 330 */
1549	.long _sys_semctl
1550	.long _sys_semget
1551	.long _sys_semop
1552	.long _sys_msgctl
1553	.long _sys_msgget	/* 335 */
1554	.long _sys_msgrcv
1555	.long _sys_msgsnd
1556	.long _sys_shmat
1557	.long _sys_shmctl
1558	.long _sys_shmdt	/* 340 */
1559	.long _sys_shmget
1560	.long _sys_splice
1561	.long _sys_sync_file_range
1562	.long _sys_tee
1563	.long _sys_vmsplice	/* 345 */
1564	.long _sys_epoll_pwait
1565	.long _sys_utimensat
1566	.long _sys_signalfd
1567	.long _sys_timerfd_create
1568	.long _sys_eventfd	/* 350 */
1569	.long _sys_pread64
1570	.long _sys_pwrite64
1571	.long _sys_fadvise64
1572	.long _sys_set_robust_list
1573	.long _sys_get_robust_list	/* 355 */
1574	.long _sys_fallocate
1575	.long _sys_semtimedop
1576	.long _sys_timerfd_settime
1577	.long _sys_timerfd_gettime
1578	.long _sys_signalfd4		/* 360 */
1579	.long _sys_eventfd2
1580	.long _sys_epoll_create1
1581	.long _sys_dup3
1582	.long _sys_pipe2
1583	.long _sys_inotify_init1	/* 365 */
1584
1585	.rept NR_syscalls-(.-_sys_call_table)/4
1586	.long _sys_ni_syscall
1587	.endr
1588END(_sys_call_table)
1589
1590#ifdef CONFIG_EXCEPTION_L1_SCRATCH
1591/* .section .l1.bss.scratch */
1592.set _exception_stack_top, L1_SCRATCH_START + L1_SCRATCH_LENGTH
1593#else
1594#ifdef CONFIG_SYSCALL_TAB_L1
1595.section .l1.bss
1596#else
1597.bss
1598#endif
1599ENTRY(_exception_stack)
1600	.rept 1024 * NR_CPUS
1601	.long 0
1602	.endr
1603_exception_stack_top:
1604#endif
1605