• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 #ifndef _IEEE1394_HOSTS_H
2 #define _IEEE1394_HOSTS_H
3 
4 #include <linux/device.h>
5 #include <linux/list.h>
6 #include <linux/timer.h>
7 #include <linux/types.h>
8 #include <linux/workqueue.h>
9 #include <asm/atomic.h>
10 
11 struct pci_dev;
12 struct module;
13 
14 #include "ieee1394_types.h"
15 #include "csr.h"
16 #include "highlevel.h"
17 
18 struct hpsb_packet;
19 struct hpsb_iso;
20 
21 struct hpsb_host {
22 	struct list_head host_list;
23 
24 	void *hostdata;
25 
26 	atomic_t generation;
27 
28 	struct list_head pending_packets;
29 	struct timer_list timeout;
30 	unsigned long timeout_interval;
31 
32 	int node_count;      /* number of identified nodes on this bus */
33 	int selfid_count;    /* total number of SelfIDs received */
34 	int nodes_active;    /* number of nodes with active link layer */
35 
36 	nodeid_t node_id;    /* node ID of this host */
37 	nodeid_t irm_id;     /* ID of this bus' isochronous resource manager */
38 	nodeid_t busmgr_id;  /* ID of this bus' bus manager */
39 
40 	/* this nodes state */
41 	unsigned in_bus_reset:1;
42 	unsigned is_shutdown:1;
43 	unsigned resume_packet_sent:1;
44 
45 	/* this nodes' duties on the bus */
46 	unsigned is_root:1;
47 	unsigned is_cycmst:1;
48 	unsigned is_irm:1;
49 	unsigned is_busmgr:1;
50 
51 	int reset_retries;
52 	quadlet_t *topology_map;
53 	u8 *speed_map;
54 
55 	int id;
56 	struct hpsb_host_driver *driver;
57 	struct pci_dev *pdev;
58 	struct device device;
59 	struct device host_dev;
60 
61 	struct delayed_work delayed_reset;
62 	unsigned config_roms:31;
63 	unsigned update_config_rom:1;
64 
65 	struct list_head addr_space;
66 	u64 low_addr_space;	/* upper bound of physical DMA area */
67 	u64 middle_addr_space;	/* upper bound of posted write area */
68 
69 	u8 speed[ALL_NODES];	/* speed between each node and local node */
70 
71 	/* per node tlabel allocation */
72 	u8 next_tl[ALL_NODES];
73 	struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES];
74 
75 	struct csr_control csr;
76 
77 	struct hpsb_address_serve dummy_zero_addr;
78 	struct hpsb_address_serve dummy_max_addr;
79 };
80 
81 enum devctl_cmd {
82 	/* Host is requested to reset its bus and cancel all outstanding async
83 	 * requests.  If arg == 1, it shall also attempt to become root on the
84 	 * bus.  Return void. */
85 	RESET_BUS,
86 
87 	/* Arg is void, return value is the hardware cycle counter value. */
88 	GET_CYCLE_COUNTER,
89 
90 	/* Set the hardware cycle counter to the value in arg, return void.
91 	 * FIXME - setting is probably not required. */
92 	SET_CYCLE_COUNTER,
93 
94 	/* Configure hardware for new bus ID in arg, return void. */
95 	SET_BUS_ID,
96 
97 	/* If arg true, start sending cycle start packets, stop if arg == 0.
98 	 * Return void. */
99 	ACT_CYCLE_MASTER,
100 
101 	/* Cancel all outstanding async requests without resetting the bus.
102 	 * Return void. */
103 	CANCEL_REQUESTS,
104 };
105 
106 enum isoctl_cmd {
107 	/* rawiso API - see iso.h for the meanings of these commands
108 	 * (they correspond exactly to the hpsb_iso_* API functions)
109 	 * INIT = allocate resources
110 	 * START = begin transmission/reception
111 	 * STOP = halt transmission/reception
112 	 * QUEUE/RELEASE = produce/consume packets
113 	 * SHUTDOWN = deallocate resources
114 	 */
115 
116 	XMIT_INIT,
117 	XMIT_START,
118 	XMIT_STOP,
119 	XMIT_QUEUE,
120 	XMIT_SHUTDOWN,
121 
122 	RECV_INIT,
123 	RECV_LISTEN_CHANNEL,   /* multi-channel only */
124 	RECV_UNLISTEN_CHANNEL, /* multi-channel only */
125 	RECV_SET_CHANNEL_MASK, /* multi-channel only; arg is a *u64 */
126 	RECV_START,
127 	RECV_STOP,
128 	RECV_RELEASE,
129 	RECV_SHUTDOWN,
130 	RECV_FLUSH
131 };
132 
133 enum reset_types {
134 	/* 166 microsecond reset -- only type of reset available on
135 	   non-1394a capable controllers */
136 	LONG_RESET,
137 
138 	/* Short (arbitrated) reset -- only available on 1394a capable
139 	   controllers */
140 	SHORT_RESET,
141 
142 	/* Variants that set force_root before issueing the bus reset */
143 	LONG_RESET_FORCE_ROOT, SHORT_RESET_FORCE_ROOT,
144 
145 	/* Variants that clear force_root before issueing the bus reset */
146 	LONG_RESET_NO_FORCE_ROOT, SHORT_RESET_NO_FORCE_ROOT
147 };
148 
149 struct hpsb_host_driver {
150 	struct module *owner;
151 	const char *name;
152 
153 	/* The hardware driver may optionally support a function that is used
154 	 * to set the hardware ConfigROM if the hardware supports handling
155 	 * reads to the ConfigROM on its own. */
156 	void (*set_hw_config_rom)(struct hpsb_host *host,
157 				  __be32 *config_rom);
158 
159 	/* This function shall implement packet transmission based on
160 	 * packet->type.  It shall CRC both parts of the packet (unless
161 	 * packet->type == raw) and do byte-swapping as necessary or instruct
162 	 * the hardware to do so.  It can return immediately after the packet
163 	 * was queued for sending.  After sending, hpsb_sent_packet() has to be
164 	 * called.  Return 0 on success, negative errno on failure.
165 	 * NOTE: The function must be callable in interrupt context.
166 	 */
167 	int (*transmit_packet)(struct hpsb_host *host,
168 			       struct hpsb_packet *packet);
169 
170 	/* This function requests miscellanous services from the driver, see
171 	 * above for command codes and expected actions.  Return -1 for unknown
172 	 * command, though that should never happen.
173 	 */
174 	int (*devctl)(struct hpsb_host *host, enum devctl_cmd command, int arg);
175 
176 	 /* ISO transmission/reception functions. Return 0 on success, -1
177 	  * (or -EXXX errno code) on failure. If the low-level driver does not
178 	  * support the new ISO API, set isoctl to NULL.
179 	  */
180 	int (*isoctl)(struct hpsb_iso *iso, enum isoctl_cmd command,
181 		      unsigned long arg);
182 
183 	/* This function is mainly to redirect local CSR reads/locks to the iso
184 	 * management registers (bus manager id, bandwidth available, channels
185 	 * available) to the hardware registers in OHCI.  reg is 0,1,2,3 for bus
186 	 * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids
187 	 * as OHCI uses).  data and compare are the new data and expected data
188 	 * respectively, return value is the old value.
189 	 */
190 	quadlet_t (*hw_csr_reg) (struct hpsb_host *host, int reg,
191 				 quadlet_t data, quadlet_t compare);
192 };
193 
194 struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
195 				  struct device *dev);
196 int hpsb_add_host(struct hpsb_host *host);
197 void hpsb_resume_host(struct hpsb_host *host);
198 void hpsb_remove_host(struct hpsb_host *host);
199 int hpsb_update_config_rom_image(struct hpsb_host *host);
200 
201 #endif /* _IEEE1394_HOSTS_H */
202