• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
3  *
4  * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used)
5  *
6  * see flexcop.c for copyright information.
7  */
8 #include "flexcop.h"
9 
10 #if 0
11 /*EEPROM (Skystar2 has one "24LC08B" chip on board) */
12 static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
13 {
14 	return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
15 }
16 
17 static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries)
18 {
19 	int i;
20 
21 	for (i = 0; i < retries; i++) {
22 		if (eeprom_write(adapter, addr, wbuf, len) == len) {
23 			if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
24 				return 1;
25 		}
26 	}
27 
28 	return 0;
29 }
30 
31 /* These functions could be used to unlock SkyStar2 cards. */
32 
33 static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
34 {
35 	u8 rbuf[20];
36 	u8 wbuf[20];
37 
38 	if (len != 16)
39 		return 0;
40 
41 	memcpy(wbuf, key, len);
42 
43 	wbuf[16] = 0;
44 	wbuf[17] = 0;
45 	wbuf[18] = 0;
46 	wbuf[19] = calc_lrc(wbuf, 19);
47 
48 	return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
49 }
50 
51 static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
52 {
53 	u8 buf[20];
54 
55 	if (len != 16)
56 		return 0;
57 
58 	if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
59 		return 0;
60 
61 	memcpy(key, buf, len);
62 
63 	return 1;
64 }
65 
66 static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
67 {
68 	u8 tmp[8];
69 
70 	if (type != 0) {
71 		tmp[0] = mac[0];
72 		tmp[1] = mac[1];
73 		tmp[2] = mac[2];
74 		tmp[3] = mac[5];
75 		tmp[4] = mac[6];
76 		tmp[5] = mac[7];
77 
78 	} else {
79 
80 		tmp[0] = mac[0];
81 		tmp[1] = mac[1];
82 		tmp[2] = mac[2];
83 		tmp[3] = mac[3];
84 		tmp[4] = mac[4];
85 		tmp[5] = mac[5];
86 	}
87 
88 	tmp[6] = 0;
89 	tmp[7] = calc_lrc(tmp, 7);
90 
91 	if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
92 		return 1;
93 
94 	return 0;
95 }
96 
97 static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len)
98 {
99 	return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
100 }
101 
102 #endif
103 
calc_lrc(u8 * buf,int len)104 static u8 calc_lrc(u8 *buf, int len)
105 {
106 	int i;
107 	u8 sum = 0;
108 	for (i = 0; i < len; i++)
109 		sum = sum ^ buf[i];
110 	return sum;
111 }
112 
flexcop_eeprom_request(struct flexcop_device * fc,flexcop_access_op_t op,u16 addr,u8 * buf,u16 len,int retries)113 static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
114 {
115 	int i,ret = 0;
116 	u8 chipaddr =  0x50 | ((addr >> 8) & 3);
117 	for (i = 0; i < retries; i++) {
118 		ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr,
119 			addr & 0xff, buf, len);
120 		if (ret == 0)
121 			break;
122 	}
123 	return ret;
124 }
125 
flexcop_eeprom_lrc_read(struct flexcop_device * fc,u16 addr,u8 * buf,u16 len,int retries)126 static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries)
127 {
128 	int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
129 	if (ret == 0)
130 		if (calc_lrc(buf, len - 1) != buf[len - 1])
131 			ret = -EINVAL;
132 	return ret;
133 }
134 
135 /* JJ's comment about extended == 1: it is not presently used anywhere but was
136  * added to the low-level functions for possible support of EUI64
137  */
flexcop_eeprom_check_mac_addr(struct flexcop_device * fc,int extended)138 int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
139 {
140 	u8 buf[8];
141 	int ret = 0;
142 
143 	if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
144 		if (extended != 0) {
145 			err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
146 			ret = -EINVAL;
147 /*			memcpy(fc->dvb_adapter.proposed_mac,buf,3);
148 			mac[3] = 0xfe;
149 			mac[4] = 0xff;
150 			memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */
151 		} else
152 			memcpy(fc->dvb_adapter.proposed_mac,buf,6);
153 	}
154 	return ret;
155 }
156 EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);
157