• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Network device driver for Cell Processor-Based Blade and Celleb platform
3  *
4  * (C) Copyright IBM Corp. 2005
5  * (C) Copyright 2006 TOSHIBA CORPORATION
6  *
7  * Authors : Utz Bacher <utz.bacher@de.ibm.com>
8  *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2, or (at your option)
13  * any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23  */
24 
25 #include <linux/compiler.h>
26 #include <linux/crc32.h>
27 #include <linux/delay.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/firmware.h>
31 #include <linux/if_vlan.h>
32 #include <linux/in.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/ip.h>
36 #include <linux/kernel.h>
37 #include <linux/mii.h>
38 #include <linux/module.h>
39 #include <linux/netdevice.h>
40 #include <linux/device.h>
41 #include <linux/pci.h>
42 #include <linux/skbuff.h>
43 #include <linux/slab.h>
44 #include <linux/tcp.h>
45 #include <linux/types.h>
46 #include <linux/vmalloc.h>
47 #include <linux/wait.h>
48 #include <linux/workqueue.h>
49 #include <linux/bitops.h>
50 #include <asm/pci-bridge.h>
51 #include <net/checksum.h>
52 
53 #include "spider_net.h"
54 
55 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
56 	      "<Jens.Osterkamp@de.ibm.com>");
57 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
58 MODULE_LICENSE("GPL");
59 MODULE_VERSION(VERSION);
60 
61 static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
62 static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
63 
64 module_param(rx_descriptors, int, 0444);
65 module_param(tx_descriptors, int, 0444);
66 
67 MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
68 		 "in rx chains");
69 MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
70 		 "in tx chain");
71 
72 char spider_net_driver_name[] = "spidernet";
73 
74 static struct pci_device_id spider_net_pci_tbl[] = {
75 	{ PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
76 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
77 	{ 0, }
78 };
79 
80 MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
81 
82 /**
83  * spider_net_read_reg - reads an SMMIO register of a card
84  * @card: device structure
85  * @reg: register to read from
86  *
87  * returns the content of the specified SMMIO register.
88  */
89 static inline u32
spider_net_read_reg(struct spider_net_card * card,u32 reg)90 spider_net_read_reg(struct spider_net_card *card, u32 reg)
91 {
92 	/* We use the powerpc specific variants instead of readl_be() because
93 	 * we know spidernet is not a real PCI device and we can thus avoid the
94 	 * performance hit caused by the PCI workarounds.
95 	 */
96 	return in_be32(card->regs + reg);
97 }
98 
99 /**
100  * spider_net_write_reg - writes to an SMMIO register of a card
101  * @card: device structure
102  * @reg: register to write to
103  * @value: value to write into the specified SMMIO register
104  */
105 static inline void
spider_net_write_reg(struct spider_net_card * card,u32 reg,u32 value)106 spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
107 {
108 	/* We use the powerpc specific variants instead of writel_be() because
109 	 * we know spidernet is not a real PCI device and we can thus avoid the
110 	 * performance hit caused by the PCI workarounds.
111 	 */
112 	out_be32(card->regs + reg, value);
113 }
114 
115 /** spider_net_write_phy - write to phy register
116  * @netdev: adapter to be written to
117  * @mii_id: id of MII
118  * @reg: PHY register
119  * @val: value to be written to phy register
120  *
121  * spider_net_write_phy_register writes to an arbitrary PHY
122  * register via the spider GPCWOPCMD register. We assume the queue does
123  * not run full (not more than 15 commands outstanding).
124  **/
125 static void
spider_net_write_phy(struct net_device * netdev,int mii_id,int reg,int val)126 spider_net_write_phy(struct net_device *netdev, int mii_id,
127 		     int reg, int val)
128 {
129 	struct spider_net_card *card = netdev_priv(netdev);
130 	u32 writevalue;
131 
132 	writevalue = ((u32)mii_id << 21) |
133 		((u32)reg << 16) | ((u32)val);
134 
135 	spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
136 }
137 
138 /** spider_net_read_phy - read from phy register
139  * @netdev: network device to be read from
140  * @mii_id: id of MII
141  * @reg: PHY register
142  *
143  * Returns value read from PHY register
144  *
145  * spider_net_write_phy reads from an arbitrary PHY
146  * register via the spider GPCROPCMD register
147  **/
148 static int
spider_net_read_phy(struct net_device * netdev,int mii_id,int reg)149 spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
150 {
151 	struct spider_net_card *card = netdev_priv(netdev);
152 	u32 readvalue;
153 
154 	readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
155 	spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
156 
157 	/* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
158 	 * interrupt, as we poll for the completion of the read operation
159 	 * in spider_net_read_phy. Should take about 50 us */
160 	do {
161 		readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
162 	} while (readvalue & SPIDER_NET_GPREXEC);
163 
164 	readvalue &= SPIDER_NET_GPRDAT_MASK;
165 
166 	return readvalue;
167 }
168 
169 /**
170  * spider_net_setup_aneg - initial auto-negotiation setup
171  * @card: device structure
172  **/
173 static void
spider_net_setup_aneg(struct spider_net_card * card)174 spider_net_setup_aneg(struct spider_net_card *card)
175 {
176 	struct mii_phy *phy = &card->phy;
177 	u32 advertise = 0;
178 	u16 bmsr, estat;
179 
180 	bmsr  = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
181 	estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
182 
183 	if (bmsr & BMSR_10HALF)
184 		advertise |= ADVERTISED_10baseT_Half;
185 	if (bmsr & BMSR_10FULL)
186 		advertise |= ADVERTISED_10baseT_Full;
187 	if (bmsr & BMSR_100HALF)
188 		advertise |= ADVERTISED_100baseT_Half;
189 	if (bmsr & BMSR_100FULL)
190 		advertise |= ADVERTISED_100baseT_Full;
191 
192 	if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_TFULL))
193 		advertise |= SUPPORTED_1000baseT_Full;
194 	if ((bmsr & BMSR_ESTATEN) && (estat & ESTATUS_1000_THALF))
195 		advertise |= SUPPORTED_1000baseT_Half;
196 
197 	mii_phy_probe(phy, phy->mii_id);
198 	phy->def->ops->setup_aneg(phy, advertise);
199 
200 }
201 
202 /**
203  * spider_net_rx_irq_off - switch off rx irq on this spider card
204  * @card: device structure
205  *
206  * switches off rx irq by masking them out in the GHIINTnMSK register
207  */
208 static void
spider_net_rx_irq_off(struct spider_net_card * card)209 spider_net_rx_irq_off(struct spider_net_card *card)
210 {
211 	u32 regvalue;
212 
213 	regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
214 	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
215 }
216 
217 /**
218  * spider_net_rx_irq_on - switch on rx irq on this spider card
219  * @card: device structure
220  *
221  * switches on rx irq by enabling them in the GHIINTnMSK register
222  */
223 static void
spider_net_rx_irq_on(struct spider_net_card * card)224 spider_net_rx_irq_on(struct spider_net_card *card)
225 {
226 	u32 regvalue;
227 
228 	regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
229 	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
230 }
231 
232 /**
233  * spider_net_set_promisc - sets the unicast address or the promiscuous mode
234  * @card: card structure
235  *
236  * spider_net_set_promisc sets the unicast destination address filter and
237  * thus either allows for non-promisc mode or promisc mode
238  */
239 static void
spider_net_set_promisc(struct spider_net_card * card)240 spider_net_set_promisc(struct spider_net_card *card)
241 {
242 	u32 macu, macl;
243 	struct net_device *netdev = card->netdev;
244 
245 	if (netdev->flags & IFF_PROMISC) {
246 		/* clear destination entry 0 */
247 		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
248 		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
249 		spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
250 				     SPIDER_NET_PROMISC_VALUE);
251 	} else {
252 		macu = netdev->dev_addr[0];
253 		macu <<= 8;
254 		macu |= netdev->dev_addr[1];
255 		memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
256 
257 		macu |= SPIDER_NET_UA_DESCR_VALUE;
258 		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
259 		spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
260 		spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
261 				     SPIDER_NET_NONPROMISC_VALUE);
262 	}
263 }
264 
265 /**
266  * spider_net_get_mac_address - read mac address from spider card
267  * @card: device structure
268  *
269  * reads MAC address from GMACUNIMACU and GMACUNIMACL registers
270  */
271 static int
spider_net_get_mac_address(struct net_device * netdev)272 spider_net_get_mac_address(struct net_device *netdev)
273 {
274 	struct spider_net_card *card = netdev_priv(netdev);
275 	u32 macl, macu;
276 
277 	macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL);
278 	macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU);
279 
280 	netdev->dev_addr[0] = (macu >> 24) & 0xff;
281 	netdev->dev_addr[1] = (macu >> 16) & 0xff;
282 	netdev->dev_addr[2] = (macu >> 8) & 0xff;
283 	netdev->dev_addr[3] = macu & 0xff;
284 	netdev->dev_addr[4] = (macl >> 8) & 0xff;
285 	netdev->dev_addr[5] = macl & 0xff;
286 
287 	if (!is_valid_ether_addr(&netdev->dev_addr[0]))
288 		return -EINVAL;
289 
290 	return 0;
291 }
292 
293 /**
294  * spider_net_get_descr_status -- returns the status of a descriptor
295  * @descr: descriptor to look at
296  *
297  * returns the status as in the dmac_cmd_status field of the descriptor
298  */
299 static inline int
spider_net_get_descr_status(struct spider_net_hw_descr * hwdescr)300 spider_net_get_descr_status(struct spider_net_hw_descr *hwdescr)
301 {
302 	return hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
303 }
304 
305 /**
306  * spider_net_free_chain - free descriptor chain
307  * @card: card structure
308  * @chain: address of chain
309  *
310  */
311 static void
spider_net_free_chain(struct spider_net_card * card,struct spider_net_descr_chain * chain)312 spider_net_free_chain(struct spider_net_card *card,
313 		      struct spider_net_descr_chain *chain)
314 {
315 	struct spider_net_descr *descr;
316 
317 	descr = chain->ring;
318 	do {
319 		descr->bus_addr = 0;
320 		descr->hwdescr->next_descr_addr = 0;
321 		descr = descr->next;
322 	} while (descr != chain->ring);
323 
324 	dma_free_coherent(&card->pdev->dev, chain->num_desc,
325 	    chain->hwring, chain->dma_addr);
326 }
327 
328 /**
329  * spider_net_init_chain - alloc and link descriptor chain
330  * @card: card structure
331  * @chain: address of chain
332  *
333  * We manage a circular list that mirrors the hardware structure,
334  * except that the hardware uses bus addresses.
335  *
336  * Returns 0 on success, <0 on failure
337  */
338 static int
spider_net_init_chain(struct spider_net_card * card,struct spider_net_descr_chain * chain)339 spider_net_init_chain(struct spider_net_card *card,
340 		       struct spider_net_descr_chain *chain)
341 {
342 	int i;
343 	struct spider_net_descr *descr;
344 	struct spider_net_hw_descr *hwdescr;
345 	dma_addr_t buf;
346 	size_t alloc_size;
347 
348 	alloc_size = chain->num_desc * sizeof(struct spider_net_hw_descr);
349 
350 	chain->hwring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
351 		&chain->dma_addr, GFP_KERNEL);
352 
353 	if (!chain->hwring)
354 		return -ENOMEM;
355 
356 	memset(chain->ring, 0, chain->num_desc * sizeof(struct spider_net_descr));
357 
358 	/* Set up the hardware pointers in each descriptor */
359 	descr = chain->ring;
360 	hwdescr = chain->hwring;
361 	buf = chain->dma_addr;
362 	for (i=0; i < chain->num_desc; i++, descr++, hwdescr++) {
363 		hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
364 		hwdescr->next_descr_addr = 0;
365 
366 		descr->hwdescr = hwdescr;
367 		descr->bus_addr = buf;
368 		descr->next = descr + 1;
369 		descr->prev = descr - 1;
370 
371 		buf += sizeof(struct spider_net_hw_descr);
372 	}
373 	/* do actual circular list */
374 	(descr-1)->next = chain->ring;
375 	chain->ring->prev = descr-1;
376 
377 	spin_lock_init(&chain->lock);
378 	chain->head = chain->ring;
379 	chain->tail = chain->ring;
380 	return 0;
381 }
382 
383 /**
384  * spider_net_free_rx_chain_contents - frees descr contents in rx chain
385  * @card: card structure
386  *
387  * returns 0 on success, <0 on failure
388  */
389 static void
spider_net_free_rx_chain_contents(struct spider_net_card * card)390 spider_net_free_rx_chain_contents(struct spider_net_card *card)
391 {
392 	struct spider_net_descr *descr;
393 
394 	descr = card->rx_chain.head;
395 	do {
396 		if (descr->skb) {
397 			pci_unmap_single(card->pdev, descr->hwdescr->buf_addr,
398 					 SPIDER_NET_MAX_FRAME,
399 					 PCI_DMA_BIDIRECTIONAL);
400 			dev_kfree_skb(descr->skb);
401 			descr->skb = NULL;
402 		}
403 		descr = descr->next;
404 	} while (descr != card->rx_chain.head);
405 }
406 
407 /**
408  * spider_net_prepare_rx_descr - Reinitialize RX descriptor
409  * @card: card structure
410  * @descr: descriptor to re-init
411  *
412  * Return 0 on succes, <0 on failure.
413  *
414  * Allocates a new rx skb, iommu-maps it and attaches it to the
415  * descriptor. Mark the descriptor as activated, ready-to-use.
416  */
417 static int
spider_net_prepare_rx_descr(struct spider_net_card * card,struct spider_net_descr * descr)418 spider_net_prepare_rx_descr(struct spider_net_card *card,
419 			    struct spider_net_descr *descr)
420 {
421 	struct spider_net_hw_descr *hwdescr = descr->hwdescr;
422 	dma_addr_t buf;
423 	int offset;
424 	int bufsize;
425 
426 	/* we need to round up the buffer size to a multiple of 128 */
427 	bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
428 		(~(SPIDER_NET_RXBUF_ALIGN - 1));
429 
430 	/* and we need to have it 128 byte aligned, therefore we allocate a
431 	 * bit more */
432 	/* allocate an skb */
433 	descr->skb = netdev_alloc_skb(card->netdev,
434 				      bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
435 	if (!descr->skb) {
436 		if (netif_msg_rx_err(card) && net_ratelimit())
437 			dev_err(&card->netdev->dev,
438 			        "Not enough memory to allocate rx buffer\n");
439 		card->spider_stats.alloc_rx_skb_error++;
440 		return -ENOMEM;
441 	}
442 	hwdescr->buf_size = bufsize;
443 	hwdescr->result_size = 0;
444 	hwdescr->valid_size = 0;
445 	hwdescr->data_status = 0;
446 	hwdescr->data_error = 0;
447 
448 	offset = ((unsigned long)descr->skb->data) &
449 		(SPIDER_NET_RXBUF_ALIGN - 1);
450 	if (offset)
451 		skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
452 	/* iommu-map the skb */
453 	buf = pci_map_single(card->pdev, descr->skb->data,
454 			SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
455 	if (pci_dma_mapping_error(card->pdev, buf)) {
456 		dev_kfree_skb_any(descr->skb);
457 		descr->skb = NULL;
458 		if (netif_msg_rx_err(card) && net_ratelimit())
459 			dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n");
460 		card->spider_stats.rx_iommu_map_error++;
461 		hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
462 	} else {
463 		hwdescr->buf_addr = buf;
464 		wmb();
465 		hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
466 					 SPIDER_NET_DMAC_NOINTR_COMPLETE;
467 	}
468 
469 	return 0;
470 }
471 
472 /**
473  * spider_net_enable_rxchtails - sets RX dmac chain tail addresses
474  * @card: card structure
475  *
476  * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
477  * chip by writing to the appropriate register. DMA is enabled in
478  * spider_net_enable_rxdmac.
479  */
480 static inline void
spider_net_enable_rxchtails(struct spider_net_card * card)481 spider_net_enable_rxchtails(struct spider_net_card *card)
482 {
483 	/* assume chain is aligned correctly */
484 	spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
485 			     card->rx_chain.tail->bus_addr);
486 }
487 
488 /**
489  * spider_net_enable_rxdmac - enables a receive DMA controller
490  * @card: card structure
491  *
492  * spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
493  * in the GDADMACCNTR register
494  */
495 static inline void
spider_net_enable_rxdmac(struct spider_net_card * card)496 spider_net_enable_rxdmac(struct spider_net_card *card)
497 {
498 	wmb();
499 	spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
500 			     SPIDER_NET_DMA_RX_VALUE);
501 }
502 
503 /**
504  * spider_net_disable_rxdmac - disables the receive DMA controller
505  * @card: card structure
506  *
507  * spider_net_disable_rxdmac terminates processing on the DMA controller
508  * by turing off the DMA controller, with the force-end flag set.
509  */
510 static inline void
spider_net_disable_rxdmac(struct spider_net_card * card)511 spider_net_disable_rxdmac(struct spider_net_card *card)
512 {
513 	spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
514 			     SPIDER_NET_DMA_RX_FEND_VALUE);
515 }
516 
517 /**
518  * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
519  * @card: card structure
520  *
521  * refills descriptors in the rx chain: allocates skbs and iommu-maps them.
522  */
523 static void
spider_net_refill_rx_chain(struct spider_net_card * card)524 spider_net_refill_rx_chain(struct spider_net_card *card)
525 {
526 	struct spider_net_descr_chain *chain = &card->rx_chain;
527 	unsigned long flags;
528 
529 	/* one context doing the refill (and a second context seeing that
530 	 * and omitting it) is ok. If called by NAPI, we'll be called again
531 	 * as spider_net_decode_one_descr is called several times. If some
532 	 * interrupt calls us, the NAPI is about to clean up anyway. */
533 	if (!spin_trylock_irqsave(&chain->lock, flags))
534 		return;
535 
536 	while (spider_net_get_descr_status(chain->head->hwdescr) ==
537 			SPIDER_NET_DESCR_NOT_IN_USE) {
538 		if (spider_net_prepare_rx_descr(card, chain->head))
539 			break;
540 		chain->head = chain->head->next;
541 	}
542 
543 	spin_unlock_irqrestore(&chain->lock, flags);
544 }
545 
546 /**
547  * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
548  * @card: card structure
549  *
550  * Returns 0 on success, <0 on failure.
551  */
552 static int
spider_net_alloc_rx_skbs(struct spider_net_card * card)553 spider_net_alloc_rx_skbs(struct spider_net_card *card)
554 {
555 	struct spider_net_descr_chain *chain = &card->rx_chain;
556 	struct spider_net_descr *start = chain->tail;
557 	struct spider_net_descr *descr = start;
558 
559 	/* Link up the hardware chain pointers */
560 	do {
561 		descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
562 		descr = descr->next;
563 	} while (descr != start);
564 
565 	/* Put at least one buffer into the chain. if this fails,
566 	 * we've got a problem. If not, spider_net_refill_rx_chain
567 	 * will do the rest at the end of this function. */
568 	if (spider_net_prepare_rx_descr(card, chain->head))
569 		goto error;
570 	else
571 		chain->head = chain->head->next;
572 
573 	/* This will allocate the rest of the rx buffers;
574 	 * if not, it's business as usual later on. */
575 	spider_net_refill_rx_chain(card);
576 	spider_net_enable_rxdmac(card);
577 	return 0;
578 
579 error:
580 	spider_net_free_rx_chain_contents(card);
581 	return -ENOMEM;
582 }
583 
584 /**
585  * spider_net_get_multicast_hash - generates hash for multicast filter table
586  * @addr: multicast address
587  *
588  * returns the hash value.
589  *
590  * spider_net_get_multicast_hash calculates a hash value for a given multicast
591  * address, that is used to set the multicast filter tables
592  */
593 static u8
spider_net_get_multicast_hash(struct net_device * netdev,__u8 * addr)594 spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
595 {
596 	u32 crc;
597 	u8 hash;
598 	char addr_for_crc[ETH_ALEN] = { 0, };
599 	int i, bit;
600 
601 	for (i = 0; i < ETH_ALEN * 8; i++) {
602 		bit = (addr[i / 8] >> (i % 8)) & 1;
603 		addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
604 	}
605 
606 	crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
607 
608 	hash = (crc >> 27);
609 	hash <<= 3;
610 	hash |= crc & 7;
611 	hash &= 0xff;
612 
613 	return hash;
614 }
615 
616 /**
617  * spider_net_set_multi - sets multicast addresses and promisc flags
618  * @netdev: interface device structure
619  *
620  * spider_net_set_multi configures multicast addresses as needed for the
621  * netdev interface. It also sets up multicast, allmulti and promisc
622  * flags appropriately
623  */
624 static void
spider_net_set_multi(struct net_device * netdev)625 spider_net_set_multi(struct net_device *netdev)
626 {
627 	struct dev_mc_list *mc;
628 	u8 hash;
629 	int i;
630 	u32 reg;
631 	struct spider_net_card *card = netdev_priv(netdev);
632 	unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] =
633 		{0, };
634 
635 	spider_net_set_promisc(card);
636 
637 	if (netdev->flags & IFF_ALLMULTI) {
638 		for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
639 			set_bit(i, bitmask);
640 		}
641 		goto write_hash;
642 	}
643 
644 	/* well, we know, what the broadcast hash value is: it's xfd
645 	hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
646 	set_bit(0xfd, bitmask);
647 
648 	for (mc = netdev->mc_list; mc; mc = mc->next) {
649 		hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr);
650 		set_bit(hash, bitmask);
651 	}
652 
653 write_hash:
654 	for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
655 		reg = 0;
656 		if (test_bit(i * 4, bitmask))
657 			reg += 0x08;
658 		reg <<= 8;
659 		if (test_bit(i * 4 + 1, bitmask))
660 			reg += 0x08;
661 		reg <<= 8;
662 		if (test_bit(i * 4 + 2, bitmask))
663 			reg += 0x08;
664 		reg <<= 8;
665 		if (test_bit(i * 4 + 3, bitmask))
666 			reg += 0x08;
667 
668 		spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
669 	}
670 }
671 
672 /**
673  * spider_net_prepare_tx_descr - fill tx descriptor with skb data
674  * @card: card structure
675  * @skb: packet to use
676  *
677  * returns 0 on success, <0 on failure.
678  *
679  * fills out the descriptor structure with skb data and len. Copies data,
680  * if needed (32bit DMA!)
681  */
682 static int
spider_net_prepare_tx_descr(struct spider_net_card * card,struct sk_buff * skb)683 spider_net_prepare_tx_descr(struct spider_net_card *card,
684 			    struct sk_buff *skb)
685 {
686 	struct spider_net_descr_chain *chain = &card->tx_chain;
687 	struct spider_net_descr *descr;
688 	struct spider_net_hw_descr *hwdescr;
689 	dma_addr_t buf;
690 	unsigned long flags;
691 
692 	buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
693 	if (pci_dma_mapping_error(card->pdev, buf)) {
694 		if (netif_msg_tx_err(card) && net_ratelimit())
695 			dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
696 				  "Dropping packet\n", skb->data, skb->len);
697 		card->spider_stats.tx_iommu_map_error++;
698 		return -ENOMEM;
699 	}
700 
701 	spin_lock_irqsave(&chain->lock, flags);
702 	descr = card->tx_chain.head;
703 	if (descr->next == chain->tail->prev) {
704 		spin_unlock_irqrestore(&chain->lock, flags);
705 		pci_unmap_single(card->pdev, buf, skb->len, PCI_DMA_TODEVICE);
706 		return -ENOMEM;
707 	}
708 	hwdescr = descr->hwdescr;
709 	chain->head = descr->next;
710 
711 	descr->skb = skb;
712 	hwdescr->buf_addr = buf;
713 	hwdescr->buf_size = skb->len;
714 	hwdescr->next_descr_addr = 0;
715 	hwdescr->data_status = 0;
716 
717 	hwdescr->dmac_cmd_status =
718 			SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL;
719 	spin_unlock_irqrestore(&chain->lock, flags);
720 
721 	if (skb->ip_summed == CHECKSUM_PARTIAL)
722 		switch (ip_hdr(skb)->protocol) {
723 		case IPPROTO_TCP:
724 			hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
725 			break;
726 		case IPPROTO_UDP:
727 			hwdescr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
728 			break;
729 		}
730 
731 	/* Chain the bus address, so that the DMA engine finds this descr. */
732 	wmb();
733 	descr->prev->hwdescr->next_descr_addr = descr->bus_addr;
734 
735 	card->netdev->trans_start = jiffies; /* set netdev watchdog timer */
736 	return 0;
737 }
738 
739 static int
spider_net_set_low_watermark(struct spider_net_card * card)740 spider_net_set_low_watermark(struct spider_net_card *card)
741 {
742 	struct spider_net_descr *descr = card->tx_chain.tail;
743 	struct spider_net_hw_descr *hwdescr;
744 	unsigned long flags;
745 	int status;
746 	int cnt=0;
747 	int i;
748 
749 	/* Measure the length of the queue. Measurement does not
750 	 * need to be precise -- does not need a lock. */
751 	while (descr != card->tx_chain.head) {
752 		status = descr->hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
753 		if (status == SPIDER_NET_DESCR_NOT_IN_USE)
754 			break;
755 		descr = descr->next;
756 		cnt++;
757 	}
758 
759 	/* If TX queue is short, don't even bother with interrupts */
760 	if (cnt < card->tx_chain.num_desc/4)
761 		return cnt;
762 
763 	/* Set low-watermark 3/4th's of the way into the queue. */
764 	descr = card->tx_chain.tail;
765 	cnt = (cnt*3)/4;
766 	for (i=0;i<cnt; i++)
767 		descr = descr->next;
768 
769 	/* Set the new watermark, clear the old watermark */
770 	spin_lock_irqsave(&card->tx_chain.lock, flags);
771 	descr->hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
772 	if (card->low_watermark && card->low_watermark != descr) {
773 		hwdescr = card->low_watermark->hwdescr;
774 		hwdescr->dmac_cmd_status =
775 		     hwdescr->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
776 	}
777 	card->low_watermark = descr;
778 	spin_unlock_irqrestore(&card->tx_chain.lock, flags);
779 	return cnt;
780 }
781 
782 /**
783  * spider_net_release_tx_chain - processes sent tx descriptors
784  * @card: adapter structure
785  * @brutal: if set, don't care about whether descriptor seems to be in use
786  *
787  * returns 0 if the tx ring is empty, otherwise 1.
788  *
789  * spider_net_release_tx_chain releases the tx descriptors that spider has
790  * finished with (if non-brutal) or simply release tx descriptors (if brutal).
791  * If some other context is calling this function, we return 1 so that we're
792  * scheduled again (if we were scheduled) and will not lose initiative.
793  */
794 static int
spider_net_release_tx_chain(struct spider_net_card * card,int brutal)795 spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
796 {
797 	struct net_device *dev = card->netdev;
798 	struct spider_net_descr_chain *chain = &card->tx_chain;
799 	struct spider_net_descr *descr;
800 	struct spider_net_hw_descr *hwdescr;
801 	struct sk_buff *skb;
802 	u32 buf_addr;
803 	unsigned long flags;
804 	int status;
805 
806 	while (1) {
807 		spin_lock_irqsave(&chain->lock, flags);
808 		if (chain->tail == chain->head) {
809 			spin_unlock_irqrestore(&chain->lock, flags);
810 			return 0;
811 		}
812 		descr = chain->tail;
813 		hwdescr = descr->hwdescr;
814 
815 		status = spider_net_get_descr_status(hwdescr);
816 		switch (status) {
817 		case SPIDER_NET_DESCR_COMPLETE:
818 			dev->stats.tx_packets++;
819 			dev->stats.tx_bytes += descr->skb->len;
820 			break;
821 
822 		case SPIDER_NET_DESCR_CARDOWNED:
823 			if (!brutal) {
824 				spin_unlock_irqrestore(&chain->lock, flags);
825 				return 1;
826 			}
827 
828 			/* fallthrough, if we release the descriptors
829 			 * brutally (then we don't care about
830 			 * SPIDER_NET_DESCR_CARDOWNED) */
831 
832 		case SPIDER_NET_DESCR_RESPONSE_ERROR:
833 		case SPIDER_NET_DESCR_PROTECTION_ERROR:
834 		case SPIDER_NET_DESCR_FORCE_END:
835 			if (netif_msg_tx_err(card))
836 				dev_err(&card->netdev->dev, "forcing end of tx descriptor "
837 				       "with status x%02x\n", status);
838 			dev->stats.tx_errors++;
839 			break;
840 
841 		default:
842 			dev->stats.tx_dropped++;
843 			if (!brutal) {
844 				spin_unlock_irqrestore(&chain->lock, flags);
845 				return 1;
846 			}
847 		}
848 
849 		chain->tail = descr->next;
850 		hwdescr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
851 		skb = descr->skb;
852 		descr->skb = NULL;
853 		buf_addr = hwdescr->buf_addr;
854 		spin_unlock_irqrestore(&chain->lock, flags);
855 
856 		/* unmap the skb */
857 		if (skb) {
858 			pci_unmap_single(card->pdev, buf_addr, skb->len,
859 					PCI_DMA_TODEVICE);
860 			dev_kfree_skb(skb);
861 		}
862 	}
863 	return 0;
864 }
865 
866 /**
867  * spider_net_kick_tx_dma - enables TX DMA processing
868  * @card: card structure
869  *
870  * This routine will start the transmit DMA running if
871  * it is not already running. This routine ned only be
872  * called when queueing a new packet to an empty tx queue.
873  * Writes the current tx chain head as start address
874  * of the tx descriptor chain and enables the transmission
875  * DMA engine.
876  */
877 static inline void
spider_net_kick_tx_dma(struct spider_net_card * card)878 spider_net_kick_tx_dma(struct spider_net_card *card)
879 {
880 	struct spider_net_descr *descr;
881 
882 	if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
883 			SPIDER_NET_TX_DMA_EN)
884 		goto out;
885 
886 	descr = card->tx_chain.tail;
887 	for (;;) {
888 		if (spider_net_get_descr_status(descr->hwdescr) ==
889 				SPIDER_NET_DESCR_CARDOWNED) {
890 			spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
891 					descr->bus_addr);
892 			spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
893 					SPIDER_NET_DMA_TX_VALUE);
894 			break;
895 		}
896 		if (descr == card->tx_chain.head)
897 			break;
898 		descr = descr->next;
899 	}
900 
901 out:
902 	mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
903 }
904 
905 /**
906  * spider_net_xmit - transmits a frame over the device
907  * @skb: packet to send out
908  * @netdev: interface device structure
909  *
910  * returns 0 on success, !0 on failure
911  */
912 static int
spider_net_xmit(struct sk_buff * skb,struct net_device * netdev)913 spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
914 {
915 	int cnt;
916 	struct spider_net_card *card = netdev_priv(netdev);
917 
918 	spider_net_release_tx_chain(card, 0);
919 
920 	if (spider_net_prepare_tx_descr(card, skb) != 0) {
921 		netdev->stats.tx_dropped++;
922 		netif_stop_queue(netdev);
923 		return NETDEV_TX_BUSY;
924 	}
925 
926 	cnt = spider_net_set_low_watermark(card);
927 	if (cnt < 5)
928 		spider_net_kick_tx_dma(card);
929 	return NETDEV_TX_OK;
930 }
931 
932 /**
933  * spider_net_cleanup_tx_ring - cleans up the TX ring
934  * @card: card structure
935  *
936  * spider_net_cleanup_tx_ring is called by either the tx_timer
937  * or from the NAPI polling routine.
938  * This routine releases resources associted with transmitted
939  * packets, including updating the queue tail pointer.
940  */
941 static void
spider_net_cleanup_tx_ring(struct spider_net_card * card)942 spider_net_cleanup_tx_ring(struct spider_net_card *card)
943 {
944 	if ((spider_net_release_tx_chain(card, 0) != 0) &&
945 	    (card->netdev->flags & IFF_UP)) {
946 		spider_net_kick_tx_dma(card);
947 		netif_wake_queue(card->netdev);
948 	}
949 }
950 
951 /**
952  * spider_net_do_ioctl - called for device ioctls
953  * @netdev: interface device structure
954  * @ifr: request parameter structure for ioctl
955  * @cmd: command code for ioctl
956  *
957  * returns 0 on success, <0 on failure. Currently, we have no special ioctls.
958  * -EOPNOTSUPP is returned, if an unknown ioctl was requested
959  */
960 static int
spider_net_do_ioctl(struct net_device * netdev,struct ifreq * ifr,int cmd)961 spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
962 {
963 	switch (cmd) {
964 	default:
965 		return -EOPNOTSUPP;
966 	}
967 }
968 
969 /**
970  * spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
971  * @descr: descriptor to process
972  * @card: card structure
973  *
974  * Fills out skb structure and passes the data to the stack.
975  * The descriptor state is not changed.
976  */
977 static void
spider_net_pass_skb_up(struct spider_net_descr * descr,struct spider_net_card * card)978 spider_net_pass_skb_up(struct spider_net_descr *descr,
979 		       struct spider_net_card *card)
980 {
981 	struct spider_net_hw_descr *hwdescr = descr->hwdescr;
982 	struct sk_buff *skb = descr->skb;
983 	struct net_device *netdev = card->netdev;
984 	u32 data_status = hwdescr->data_status;
985 	u32 data_error = hwdescr->data_error;
986 
987 	skb_put(skb, hwdescr->valid_size);
988 
989 	/* the card seems to add 2 bytes of junk in front
990 	 * of the ethernet frame */
991 #define SPIDER_MISALIGN		2
992 	skb_pull(skb, SPIDER_MISALIGN);
993 	skb->protocol = eth_type_trans(skb, netdev);
994 
995 	/* checksum offload */
996 	if (card->options.rx_csum) {
997 		if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
998 		       SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
999 		     !(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
1000 			skb->ip_summed = CHECKSUM_UNNECESSARY;
1001 		else
1002 			skb->ip_summed = CHECKSUM_NONE;
1003 	} else
1004 		skb->ip_summed = CHECKSUM_NONE;
1005 
1006 	if (data_status & SPIDER_NET_VLAN_PACKET) {
1007 		/* further enhancements: HW-accel VLAN
1008 		 * vlan_hwaccel_receive_skb
1009 		 */
1010 	}
1011 
1012 	/* update netdevice statistics */
1013 	netdev->stats.rx_packets++;
1014 	netdev->stats.rx_bytes += skb->len;
1015 
1016 	/* pass skb up to stack */
1017 	netif_receive_skb(skb);
1018 }
1019 
show_rx_chain(struct spider_net_card * card)1020 static void show_rx_chain(struct spider_net_card *card)
1021 {
1022 	struct spider_net_descr_chain *chain = &card->rx_chain;
1023 	struct spider_net_descr *start= chain->tail;
1024 	struct spider_net_descr *descr= start;
1025 	struct spider_net_hw_descr *hwd = start->hwdescr;
1026 	struct device *dev = &card->netdev->dev;
1027 	u32 curr_desc, next_desc;
1028 	int status;
1029 
1030 	int tot = 0;
1031 	int cnt = 0;
1032 	int off = start - chain->ring;
1033 	int cstat = hwd->dmac_cmd_status;
1034 
1035 	dev_info(dev, "Total number of descrs=%d\n",
1036 		chain->num_desc);
1037 	dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n",
1038 		off, cstat);
1039 
1040 	curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA);
1041 	next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA);
1042 
1043 	status = cstat;
1044 	do
1045 	{
1046 		hwd = descr->hwdescr;
1047 		off = descr - chain->ring;
1048 		status = hwd->dmac_cmd_status;
1049 
1050 		if (descr == chain->head)
1051 			dev_info(dev, "Chain head is at %d, head status=0x%x\n",
1052 			         off, status);
1053 
1054 		if (curr_desc == descr->bus_addr)
1055 			dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
1056 			         off, status);
1057 
1058 		if (next_desc == descr->bus_addr)
1059 			dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
1060 			         off, status);
1061 
1062 		if (hwd->next_descr_addr == 0)
1063 			dev_info(dev, "chain is cut at %d\n", off);
1064 
1065 		if (cstat != status) {
1066 			int from = (chain->num_desc + off - cnt) % chain->num_desc;
1067 			int to = (chain->num_desc + off - 1) % chain->num_desc;
1068 			dev_info(dev, "Have %d (from %d to %d) descrs "
1069 			         "with stat=0x%08x\n", cnt, from, to, cstat);
1070 			cstat = status;
1071 			cnt = 0;
1072 		}
1073 
1074 		cnt ++;
1075 		tot ++;
1076 		descr = descr->next;
1077 	} while (descr != start);
1078 
1079 	dev_info(dev, "Last %d descrs with stat=0x%08x "
1080 	         "for a total of %d descrs\n", cnt, cstat, tot);
1081 
1082 #ifdef DEBUG
1083 	/* Now dump the whole ring */
1084 	descr = start;
1085 	do
1086 	{
1087 		struct spider_net_hw_descr *hwd = descr->hwdescr;
1088 		status = spider_net_get_descr_status(hwd);
1089 		cnt = descr - chain->ring;
1090 		dev_info(dev, "Descr %d stat=0x%08x skb=%p\n",
1091 		         cnt, status, descr->skb);
1092 		dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n",
1093 		         descr->bus_addr, hwd->buf_addr, hwd->buf_size);
1094 		dev_info(dev, "next=%08x result sz=%d valid sz=%d\n",
1095 		         hwd->next_descr_addr, hwd->result_size,
1096 		         hwd->valid_size);
1097 		dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n",
1098 		         hwd->dmac_cmd_status, hwd->data_status,
1099 		         hwd->data_error);
1100 		dev_info(dev, "\n");
1101 
1102 		descr = descr->next;
1103 	} while (descr != start);
1104 #endif
1105 
1106 }
1107 
1108 /**
1109  * spider_net_resync_head_ptr - Advance head ptr past empty descrs
1110  *
1111  * If the driver fails to keep up and empty the queue, then the
1112  * hardware wil run out of room to put incoming packets. This
1113  * will cause the hardware to skip descrs that are full (instead
1114  * of halting/retrying). Thus, once the driver runs, it wil need
1115  * to "catch up" to where the hardware chain pointer is at.
1116  */
spider_net_resync_head_ptr(struct spider_net_card * card)1117 static void spider_net_resync_head_ptr(struct spider_net_card *card)
1118 {
1119 	unsigned long flags;
1120 	struct spider_net_descr_chain *chain = &card->rx_chain;
1121 	struct spider_net_descr *descr;
1122 	int i, status;
1123 
1124 	/* Advance head pointer past any empty descrs */
1125 	descr = chain->head;
1126 	status = spider_net_get_descr_status(descr->hwdescr);
1127 
1128 	if (status == SPIDER_NET_DESCR_NOT_IN_USE)
1129 		return;
1130 
1131 	spin_lock_irqsave(&chain->lock, flags);
1132 
1133 	descr = chain->head;
1134 	status = spider_net_get_descr_status(descr->hwdescr);
1135 	for (i=0; i<chain->num_desc; i++) {
1136 		if (status != SPIDER_NET_DESCR_CARDOWNED) break;
1137 		descr = descr->next;
1138 		status = spider_net_get_descr_status(descr->hwdescr);
1139 	}
1140 	chain->head = descr;
1141 
1142 	spin_unlock_irqrestore(&chain->lock, flags);
1143 }
1144 
spider_net_resync_tail_ptr(struct spider_net_card * card)1145 static int spider_net_resync_tail_ptr(struct spider_net_card *card)
1146 {
1147 	struct spider_net_descr_chain *chain = &card->rx_chain;
1148 	struct spider_net_descr *descr;
1149 	int i, status;
1150 
1151 	/* Advance tail pointer past any empty and reaped descrs */
1152 	descr = chain->tail;
1153 	status = spider_net_get_descr_status(descr->hwdescr);
1154 
1155 	for (i=0; i<chain->num_desc; i++) {
1156 		if ((status != SPIDER_NET_DESCR_CARDOWNED) &&
1157 		    (status != SPIDER_NET_DESCR_NOT_IN_USE)) break;
1158 		descr = descr->next;
1159 		status = spider_net_get_descr_status(descr->hwdescr);
1160 	}
1161 	chain->tail = descr;
1162 
1163 	if ((i == chain->num_desc) || (i == 0))
1164 		return 1;
1165 	return 0;
1166 }
1167 
1168 /**
1169  * spider_net_decode_one_descr - processes an RX descriptor
1170  * @card: card structure
1171  *
1172  * Returns 1 if a packet has been sent to the stack, otherwise 0.
1173  *
1174  * Processes an RX descriptor by iommu-unmapping the data buffer
1175  * and passing the packet up to the stack. This function is called
1176  * in softirq context, e.g. either bottom half from interrupt or
1177  * NAPI polling context.
1178  */
1179 static int
spider_net_decode_one_descr(struct spider_net_card * card)1180 spider_net_decode_one_descr(struct spider_net_card *card)
1181 {
1182 	struct net_device *dev = card->netdev;
1183 	struct spider_net_descr_chain *chain = &card->rx_chain;
1184 	struct spider_net_descr *descr = chain->tail;
1185 	struct spider_net_hw_descr *hwdescr = descr->hwdescr;
1186 	u32 hw_buf_addr;
1187 	int status;
1188 
1189 	status = spider_net_get_descr_status(hwdescr);
1190 
1191 	/* Nothing in the descriptor, or ring must be empty */
1192 	if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
1193 	    (status == SPIDER_NET_DESCR_NOT_IN_USE))
1194 		return 0;
1195 
1196 	/* descriptor definitively used -- move on tail */
1197 	chain->tail = descr->next;
1198 
1199 	/* unmap descriptor */
1200 	hw_buf_addr = hwdescr->buf_addr;
1201 	hwdescr->buf_addr = 0xffffffff;
1202 	pci_unmap_single(card->pdev, hw_buf_addr,
1203 			SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
1204 
1205 	if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
1206 	     (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
1207 	     (status == SPIDER_NET_DESCR_FORCE_END) ) {
1208 		if (netif_msg_rx_err(card))
1209 			dev_err(&dev->dev,
1210 			       "dropping RX descriptor with state %d\n", status);
1211 		dev->stats.rx_dropped++;
1212 		goto bad_desc;
1213 	}
1214 
1215 	if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
1216 	     (status != SPIDER_NET_DESCR_FRAME_END) ) {
1217 		if (netif_msg_rx_err(card))
1218 			dev_err(&card->netdev->dev,
1219 			       "RX descriptor with unknown state %d\n", status);
1220 		card->spider_stats.rx_desc_unk_state++;
1221 		goto bad_desc;
1222 	}
1223 
1224 	/* The cases we'll throw away the packet immediately */
1225 	if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
1226 		if (netif_msg_rx_err(card))
1227 			dev_err(&card->netdev->dev,
1228 			       "error in received descriptor found, "
1229 			       "data_status=x%08x, data_error=x%08x\n",
1230 			       hwdescr->data_status, hwdescr->data_error);
1231 		goto bad_desc;
1232 	}
1233 
1234 	if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
1235 		dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
1236 			       hwdescr->dmac_cmd_status);
1237 		pr_err("buf_addr=x%08x\n", hw_buf_addr);
1238 		pr_err("buf_size=x%08x\n", hwdescr->buf_size);
1239 		pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
1240 		pr_err("result_size=x%08x\n", hwdescr->result_size);
1241 		pr_err("valid_size=x%08x\n", hwdescr->valid_size);
1242 		pr_err("data_status=x%08x\n", hwdescr->data_status);
1243 		pr_err("data_error=x%08x\n", hwdescr->data_error);
1244 		pr_err("which=%ld\n", descr - card->rx_chain.ring);
1245 
1246 		card->spider_stats.rx_desc_error++;
1247 		goto bad_desc;
1248 	}
1249 
1250 	/* Ok, we've got a packet in descr */
1251 	spider_net_pass_skb_up(descr, card);
1252 	descr->skb = NULL;
1253 	hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1254 	return 1;
1255 
1256 bad_desc:
1257 	if (netif_msg_rx_err(card))
1258 		show_rx_chain(card);
1259 	dev_kfree_skb_irq(descr->skb);
1260 	descr->skb = NULL;
1261 	hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
1262 	return 0;
1263 }
1264 
1265 /**
1266  * spider_net_poll - NAPI poll function called by the stack to return packets
1267  * @netdev: interface device structure
1268  * @budget: number of packets we can pass to the stack at most
1269  *
1270  * returns 0 if no more packets available to the driver/stack. Returns 1,
1271  * if the quota is exceeded, but the driver has still packets.
1272  *
1273  * spider_net_poll returns all packets from the rx descriptors to the stack
1274  * (using netif_receive_skb). If all/enough packets are up, the driver
1275  * reenables interrupts and returns 0. If not, 1 is returned.
1276  */
spider_net_poll(struct napi_struct * napi,int budget)1277 static int spider_net_poll(struct napi_struct *napi, int budget)
1278 {
1279 	struct spider_net_card *card = container_of(napi, struct spider_net_card, napi);
1280 	int packets_done = 0;
1281 
1282 	while (packets_done < budget) {
1283 		if (!spider_net_decode_one_descr(card))
1284 			break;
1285 
1286 		packets_done++;
1287 	}
1288 
1289 	if ((packets_done == 0) && (card->num_rx_ints != 0)) {
1290 		if (!spider_net_resync_tail_ptr(card))
1291 			packets_done = budget;
1292 		spider_net_resync_head_ptr(card);
1293 	}
1294 	card->num_rx_ints = 0;
1295 
1296 	spider_net_refill_rx_chain(card);
1297 	spider_net_enable_rxdmac(card);
1298 
1299 	spider_net_cleanup_tx_ring(card);
1300 
1301 	/* if all packets are in the stack, enable interrupts and return 0 */
1302 	/* if not, return 1 */
1303 	if (packets_done < budget) {
1304 		netif_rx_complete(napi);
1305 		spider_net_rx_irq_on(card);
1306 		card->ignore_rx_ramfull = 0;
1307 	}
1308 
1309 	return packets_done;
1310 }
1311 
1312 /**
1313  * spider_net_change_mtu - changes the MTU of an interface
1314  * @netdev: interface device structure
1315  * @new_mtu: new MTU value
1316  *
1317  * returns 0 on success, <0 on failure
1318  */
1319 static int
spider_net_change_mtu(struct net_device * netdev,int new_mtu)1320 spider_net_change_mtu(struct net_device *netdev, int new_mtu)
1321 {
1322 	/* no need to re-alloc skbs or so -- the max mtu is about 2.3k
1323 	 * and mtu is outbound only anyway */
1324 	if ( (new_mtu < SPIDER_NET_MIN_MTU ) ||
1325 		(new_mtu > SPIDER_NET_MAX_MTU) )
1326 		return -EINVAL;
1327 	netdev->mtu = new_mtu;
1328 	return 0;
1329 }
1330 
1331 /**
1332  * spider_net_set_mac - sets the MAC of an interface
1333  * @netdev: interface device structure
1334  * @ptr: pointer to new MAC address
1335  *
1336  * Returns 0 on success, <0 on failure. Currently, we don't support this
1337  * and will always return EOPNOTSUPP.
1338  */
1339 static int
spider_net_set_mac(struct net_device * netdev,void * p)1340 spider_net_set_mac(struct net_device *netdev, void *p)
1341 {
1342 	struct spider_net_card *card = netdev_priv(netdev);
1343 	u32 macl, macu, regvalue;
1344 	struct sockaddr *addr = p;
1345 
1346 	if (!is_valid_ether_addr(addr->sa_data))
1347 		return -EADDRNOTAVAIL;
1348 
1349 	/* switch off GMACTPE and GMACRPE */
1350 	regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1351 	regvalue &= ~((1 << 5) | (1 << 6));
1352 	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1353 
1354 	/* write mac */
1355 	macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) +
1356 		(addr->sa_data[2]<<8) + (addr->sa_data[3]);
1357 	macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]);
1358 	spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
1359 	spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
1360 
1361 	/* switch GMACTPE and GMACRPE back on */
1362 	regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
1363 	regvalue |= ((1 << 5) | (1 << 6));
1364 	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
1365 
1366 	spider_net_set_promisc(card);
1367 
1368 	/* look up, whether we have been successful */
1369 	if (spider_net_get_mac_address(netdev))
1370 		return -EADDRNOTAVAIL;
1371 	if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len))
1372 		return -EADDRNOTAVAIL;
1373 
1374 	return 0;
1375 }
1376 
1377 /**
1378  * spider_net_link_reset
1379  * @netdev: net device structure
1380  *
1381  * This is called when the PHY_LINK signal is asserted. For the blade this is
1382  * not connected so we should never get here.
1383  *
1384  */
1385 static void
spider_net_link_reset(struct net_device * netdev)1386 spider_net_link_reset(struct net_device *netdev)
1387 {
1388 
1389 	struct spider_net_card *card = netdev_priv(netdev);
1390 
1391 	del_timer_sync(&card->aneg_timer);
1392 
1393 	/* clear interrupt, block further interrupts */
1394 	spider_net_write_reg(card, SPIDER_NET_GMACST,
1395 			     spider_net_read_reg(card, SPIDER_NET_GMACST));
1396 	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1397 
1398 	/* reset phy and setup aneg */
1399 	card->aneg_count = 0;
1400 	card->medium = BCM54XX_COPPER;
1401 	spider_net_setup_aneg(card);
1402 	mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1403 
1404 }
1405 
1406 /**
1407  * spider_net_handle_error_irq - handles errors raised by an interrupt
1408  * @card: card structure
1409  * @status_reg: interrupt status register 0 (GHIINT0STS)
1410  *
1411  * spider_net_handle_error_irq treats or ignores all error conditions
1412  * found when an interrupt is presented
1413  */
1414 static void
spider_net_handle_error_irq(struct spider_net_card * card,u32 status_reg,u32 error_reg1,u32 error_reg2)1415 spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg,
1416 			    u32 error_reg1, u32 error_reg2)
1417 {
1418 	u32 i;
1419 	int show_error = 1;
1420 
1421 	/* check GHIINT0STS ************************************/
1422 	if (status_reg)
1423 		for (i = 0; i < 32; i++)
1424 			if (status_reg & (1<<i))
1425 				switch (i)
1426 	{
1427 	/* let error_reg1 and error_reg2 evaluation decide, what to do
1428 	case SPIDER_NET_PHYINT:
1429 	case SPIDER_NET_GMAC2INT:
1430 	case SPIDER_NET_GMAC1INT:
1431 	case SPIDER_NET_GFIFOINT:
1432 	case SPIDER_NET_DMACINT:
1433 	case SPIDER_NET_GSYSINT:
1434 		break; */
1435 
1436 	case SPIDER_NET_GIPSINT:
1437 		show_error = 0;
1438 		break;
1439 
1440 	case SPIDER_NET_GPWOPCMPINT:
1441 		/* PHY write operation completed */
1442 		show_error = 0;
1443 		break;
1444 	case SPIDER_NET_GPROPCMPINT:
1445 		/* PHY read operation completed */
1446 		/* we don't use semaphores, as we poll for the completion
1447 		 * of the read operation in spider_net_read_phy. Should take
1448 		 * about 50 us */
1449 		show_error = 0;
1450 		break;
1451 	case SPIDER_NET_GPWFFINT:
1452 		/* PHY command queue full */
1453 		if (netif_msg_intr(card))
1454 			dev_err(&card->netdev->dev, "PHY write queue full\n");
1455 		show_error = 0;
1456 		break;
1457 
1458 	/* case SPIDER_NET_GRMDADRINT: not used. print a message */
1459 	/* case SPIDER_NET_GRMARPINT: not used. print a message */
1460 	/* case SPIDER_NET_GRMMPINT: not used. print a message */
1461 
1462 	case SPIDER_NET_GDTDEN0INT:
1463 		/* someone has set TX_DMA_EN to 0 */
1464 		show_error = 0;
1465 		break;
1466 
1467 	case SPIDER_NET_GDDDEN0INT: /* fallthrough */
1468 	case SPIDER_NET_GDCDEN0INT: /* fallthrough */
1469 	case SPIDER_NET_GDBDEN0INT: /* fallthrough */
1470 	case SPIDER_NET_GDADEN0INT:
1471 		/* someone has set RX_DMA_EN to 0 */
1472 		show_error = 0;
1473 		break;
1474 
1475 	/* RX interrupts */
1476 	case SPIDER_NET_GDDFDCINT:
1477 	case SPIDER_NET_GDCFDCINT:
1478 	case SPIDER_NET_GDBFDCINT:
1479 	case SPIDER_NET_GDAFDCINT:
1480 	/* case SPIDER_NET_GDNMINT: not used. print a message */
1481 	/* case SPIDER_NET_GCNMINT: not used. print a message */
1482 	/* case SPIDER_NET_GBNMINT: not used. print a message */
1483 	/* case SPIDER_NET_GANMINT: not used. print a message */
1484 	/* case SPIDER_NET_GRFNMINT: not used. print a message */
1485 		show_error = 0;
1486 		break;
1487 
1488 	/* TX interrupts */
1489 	case SPIDER_NET_GDTFDCINT:
1490 		show_error = 0;
1491 		break;
1492 	case SPIDER_NET_GTTEDINT:
1493 		show_error = 0;
1494 		break;
1495 	case SPIDER_NET_GDTDCEINT:
1496 		/* chain end. If a descriptor should be sent, kick off
1497 		 * tx dma
1498 		if (card->tx_chain.tail != card->tx_chain.head)
1499 			spider_net_kick_tx_dma(card);
1500 		*/
1501 		show_error = 0;
1502 		break;
1503 
1504 	/* case SPIDER_NET_G1TMCNTINT: not used. print a message */
1505 	/* case SPIDER_NET_GFREECNTINT: not used. print a message */
1506 	}
1507 
1508 	/* check GHIINT1STS ************************************/
1509 	if (error_reg1)
1510 		for (i = 0; i < 32; i++)
1511 			if (error_reg1 & (1<<i))
1512 				switch (i)
1513 	{
1514 	case SPIDER_NET_GTMFLLINT:
1515 		/* TX RAM full may happen on a usual case.
1516 		 * Logging is not needed. */
1517 		show_error = 0;
1518 		break;
1519 	case SPIDER_NET_GRFDFLLINT: /* fallthrough */
1520 	case SPIDER_NET_GRFCFLLINT: /* fallthrough */
1521 	case SPIDER_NET_GRFBFLLINT: /* fallthrough */
1522 	case SPIDER_NET_GRFAFLLINT: /* fallthrough */
1523 	case SPIDER_NET_GRMFLLINT:
1524 		/* Could happen when rx chain is full */
1525 		if (card->ignore_rx_ramfull == 0) {
1526 			card->ignore_rx_ramfull = 1;
1527 			spider_net_resync_head_ptr(card);
1528 			spider_net_refill_rx_chain(card);
1529 			spider_net_enable_rxdmac(card);
1530 			card->num_rx_ints ++;
1531 			netif_rx_schedule(&card->napi);
1532 		}
1533 		show_error = 0;
1534 		break;
1535 
1536 	/* case SPIDER_NET_GTMSHTINT: problem, print a message */
1537 	case SPIDER_NET_GDTINVDINT:
1538 		/* allrighty. tx from previous descr ok */
1539 		show_error = 0;
1540 		break;
1541 
1542 	/* chain end */
1543 	case SPIDER_NET_GDDDCEINT: /* fallthrough */
1544 	case SPIDER_NET_GDCDCEINT: /* fallthrough */
1545 	case SPIDER_NET_GDBDCEINT: /* fallthrough */
1546 	case SPIDER_NET_GDADCEINT:
1547 		spider_net_resync_head_ptr(card);
1548 		spider_net_refill_rx_chain(card);
1549 		spider_net_enable_rxdmac(card);
1550 		card->num_rx_ints ++;
1551 		netif_rx_schedule(&card->napi);
1552 		show_error = 0;
1553 		break;
1554 
1555 	/* invalid descriptor */
1556 	case SPIDER_NET_GDDINVDINT: /* fallthrough */
1557 	case SPIDER_NET_GDCINVDINT: /* fallthrough */
1558 	case SPIDER_NET_GDBINVDINT: /* fallthrough */
1559 	case SPIDER_NET_GDAINVDINT:
1560 		/* Could happen when rx chain is full */
1561 		spider_net_resync_head_ptr(card);
1562 		spider_net_refill_rx_chain(card);
1563 		spider_net_enable_rxdmac(card);
1564 		card->num_rx_ints ++;
1565 		netif_rx_schedule(&card->napi);
1566 		show_error = 0;
1567 		break;
1568 
1569 	/* case SPIDER_NET_GDTRSERINT: problem, print a message */
1570 	/* case SPIDER_NET_GDDRSERINT: problem, print a message */
1571 	/* case SPIDER_NET_GDCRSERINT: problem, print a message */
1572 	/* case SPIDER_NET_GDBRSERINT: problem, print a message */
1573 	/* case SPIDER_NET_GDARSERINT: problem, print a message */
1574 	/* case SPIDER_NET_GDSERINT: problem, print a message */
1575 	/* case SPIDER_NET_GDTPTERINT: problem, print a message */
1576 	/* case SPIDER_NET_GDDPTERINT: problem, print a message */
1577 	/* case SPIDER_NET_GDCPTERINT: problem, print a message */
1578 	/* case SPIDER_NET_GDBPTERINT: problem, print a message */
1579 	/* case SPIDER_NET_GDAPTERINT: problem, print a message */
1580 	default:
1581 		show_error = 1;
1582 		break;
1583 	}
1584 
1585 	/* check GHIINT2STS ************************************/
1586 	if (error_reg2)
1587 		for (i = 0; i < 32; i++)
1588 			if (error_reg2 & (1<<i))
1589 				switch (i)
1590 	{
1591 	/* there is nothing we can (want  to) do at this time. Log a
1592 	 * message, we can switch on and off the specific values later on
1593 	case SPIDER_NET_GPROPERINT:
1594 	case SPIDER_NET_GMCTCRSNGINT:
1595 	case SPIDER_NET_GMCTLCOLINT:
1596 	case SPIDER_NET_GMCTTMOTINT:
1597 	case SPIDER_NET_GMCRCAERINT:
1598 	case SPIDER_NET_GMCRCALERINT:
1599 	case SPIDER_NET_GMCRALNERINT:
1600 	case SPIDER_NET_GMCROVRINT:
1601 	case SPIDER_NET_GMCRRNTINT:
1602 	case SPIDER_NET_GMCRRXERINT:
1603 	case SPIDER_NET_GTITCSERINT:
1604 	case SPIDER_NET_GTIFMTERINT:
1605 	case SPIDER_NET_GTIPKTRVKINT:
1606 	case SPIDER_NET_GTISPINGINT:
1607 	case SPIDER_NET_GTISADNGINT:
1608 	case SPIDER_NET_GTISPDNGINT:
1609 	case SPIDER_NET_GRIFMTERINT:
1610 	case SPIDER_NET_GRIPKTRVKINT:
1611 	case SPIDER_NET_GRISPINGINT:
1612 	case SPIDER_NET_GRISADNGINT:
1613 	case SPIDER_NET_GRISPDNGINT:
1614 		break;
1615 	*/
1616 		default:
1617 			break;
1618 	}
1619 
1620 	if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
1621 		dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, "
1622 		       "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
1623 		       status_reg, error_reg1, error_reg2);
1624 
1625 	/* clear interrupt sources */
1626 	spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
1627 	spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
1628 }
1629 
1630 /**
1631  * spider_net_interrupt - interrupt handler for spider_net
1632  * @irq: interrupt number
1633  * @ptr: pointer to net_device
1634  *
1635  * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
1636  * interrupt found raised by card.
1637  *
1638  * This is the interrupt handler, that turns off
1639  * interrupts for this device and makes the stack poll the driver
1640  */
1641 static irqreturn_t
spider_net_interrupt(int irq,void * ptr)1642 spider_net_interrupt(int irq, void *ptr)
1643 {
1644 	struct net_device *netdev = ptr;
1645 	struct spider_net_card *card = netdev_priv(netdev);
1646 	u32 status_reg, error_reg1, error_reg2;
1647 
1648 	status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
1649 	error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
1650 	error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
1651 
1652 	if (!(status_reg & SPIDER_NET_INT0_MASK_VALUE) &&
1653 	    !(error_reg1 & SPIDER_NET_INT1_MASK_VALUE) &&
1654 	    !(error_reg2 & SPIDER_NET_INT2_MASK_VALUE))
1655 		return IRQ_NONE;
1656 
1657 	if (status_reg & SPIDER_NET_RXINT ) {
1658 		spider_net_rx_irq_off(card);
1659 		netif_rx_schedule(&card->napi);
1660 		card->num_rx_ints ++;
1661 	}
1662 	if (status_reg & SPIDER_NET_TXINT)
1663 		netif_rx_schedule(&card->napi);
1664 
1665 	if (status_reg & SPIDER_NET_LINKINT)
1666 		spider_net_link_reset(netdev);
1667 
1668 	if (status_reg & SPIDER_NET_ERRINT )
1669 		spider_net_handle_error_irq(card, status_reg,
1670 					    error_reg1, error_reg2);
1671 
1672 	/* clear interrupt sources */
1673 	spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
1674 
1675 	return IRQ_HANDLED;
1676 }
1677 
1678 #ifdef CONFIG_NET_POLL_CONTROLLER
1679 /**
1680  * spider_net_poll_controller - artificial interrupt for netconsole etc.
1681  * @netdev: interface device structure
1682  *
1683  * see Documentation/networking/netconsole.txt
1684  */
1685 static void
spider_net_poll_controller(struct net_device * netdev)1686 spider_net_poll_controller(struct net_device *netdev)
1687 {
1688 	disable_irq(netdev->irq);
1689 	spider_net_interrupt(netdev->irq, netdev);
1690 	enable_irq(netdev->irq);
1691 }
1692 #endif /* CONFIG_NET_POLL_CONTROLLER */
1693 
1694 /**
1695  * spider_net_enable_interrupts - enable interrupts
1696  * @card: card structure
1697  *
1698  * spider_net_enable_interrupt enables several interrupts
1699  */
1700 static void
spider_net_enable_interrupts(struct spider_net_card * card)1701 spider_net_enable_interrupts(struct spider_net_card *card)
1702 {
1703 	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
1704 			     SPIDER_NET_INT0_MASK_VALUE);
1705 	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
1706 			     SPIDER_NET_INT1_MASK_VALUE);
1707 	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
1708 			     SPIDER_NET_INT2_MASK_VALUE);
1709 }
1710 
1711 /**
1712  * spider_net_disable_interrupts - disable interrupts
1713  * @card: card structure
1714  *
1715  * spider_net_disable_interrupts disables all the interrupts
1716  */
1717 static void
spider_net_disable_interrupts(struct spider_net_card * card)1718 spider_net_disable_interrupts(struct spider_net_card *card)
1719 {
1720 	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
1721 	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
1722 	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
1723 	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
1724 }
1725 
1726 /**
1727  * spider_net_init_card - initializes the card
1728  * @card: card structure
1729  *
1730  * spider_net_init_card initializes the card so that other registers can
1731  * be used
1732  */
1733 static void
spider_net_init_card(struct spider_net_card * card)1734 spider_net_init_card(struct spider_net_card *card)
1735 {
1736 	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1737 			     SPIDER_NET_CKRCTRL_STOP_VALUE);
1738 
1739 	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
1740 			     SPIDER_NET_CKRCTRL_RUN_VALUE);
1741 
1742 	/* trigger ETOMOD signal */
1743 	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1744 		spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
1745 
1746 	spider_net_disable_interrupts(card);
1747 }
1748 
1749 /**
1750  * spider_net_enable_card - enables the card by setting all kinds of regs
1751  * @card: card structure
1752  *
1753  * spider_net_enable_card sets a lot of SMMIO registers to enable the device
1754  */
1755 static void
spider_net_enable_card(struct spider_net_card * card)1756 spider_net_enable_card(struct spider_net_card *card)
1757 {
1758 	int i;
1759 	/* the following array consists of (register),(value) pairs
1760 	 * that are set in this function. A register of 0 ends the list */
1761 	u32 regs[][2] = {
1762 		{ SPIDER_NET_GRESUMINTNUM, 0 },
1763 		{ SPIDER_NET_GREINTNUM, 0 },
1764 
1765 		/* set interrupt frame number registers */
1766 		/* clear the single DMA engine registers first */
1767 		{ SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1768 		{ SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1769 		{ SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1770 		{ SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
1771 		/* then set, what we really need */
1772 		{ SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
1773 
1774 		/* timer counter registers and stuff */
1775 		{ SPIDER_NET_GFREECNNUM, 0 },
1776 		{ SPIDER_NET_GONETIMENUM, 0 },
1777 		{ SPIDER_NET_GTOUTFRMNUM, 0 },
1778 
1779 		/* RX mode setting */
1780 		{ SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
1781 		/* TX mode setting */
1782 		{ SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
1783 		/* IPSEC mode setting */
1784 		{ SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
1785 
1786 		{ SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
1787 
1788 		{ SPIDER_NET_GMRWOLCTRL, 0 },
1789 		{ SPIDER_NET_GTESTMD, 0x10000000 },
1790 		{ SPIDER_NET_GTTQMSK, 0x00400040 },
1791 
1792 		{ SPIDER_NET_GMACINTEN, 0 },
1793 
1794 		/* flow control stuff */
1795 		{ SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
1796 		{ SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
1797 
1798 		{ SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
1799 		{ 0, 0}
1800 	};
1801 
1802 	i = 0;
1803 	while (regs[i][0]) {
1804 		spider_net_write_reg(card, regs[i][0], regs[i][1]);
1805 		i++;
1806 	}
1807 
1808 	/* clear unicast filter table entries 1 to 14 */
1809 	for (i = 1; i <= 14; i++) {
1810 		spider_net_write_reg(card,
1811 				     SPIDER_NET_GMRUAFILnR + i * 8,
1812 				     0x00080000);
1813 		spider_net_write_reg(card,
1814 				     SPIDER_NET_GMRUAFILnR + i * 8 + 4,
1815 				     0x00000000);
1816 	}
1817 
1818 	spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
1819 
1820 	spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
1821 
1822 	/* set chain tail adress for RX chains and
1823 	 * enable DMA */
1824 	spider_net_enable_rxchtails(card);
1825 	spider_net_enable_rxdmac(card);
1826 
1827 	spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
1828 
1829 	spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
1830 			     SPIDER_NET_LENLMT_VALUE);
1831 	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
1832 			     SPIDER_NET_OPMODE_VALUE);
1833 
1834 	spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
1835 			     SPIDER_NET_GDTBSTA);
1836 }
1837 
1838 /**
1839  * spider_net_download_firmware - loads firmware into the adapter
1840  * @card: card structure
1841  * @firmware_ptr: pointer to firmware data
1842  *
1843  * spider_net_download_firmware loads the firmware data into the
1844  * adapter. It assumes the length etc. to be allright.
1845  */
1846 static int
spider_net_download_firmware(struct spider_net_card * card,const void * firmware_ptr)1847 spider_net_download_firmware(struct spider_net_card *card,
1848 			     const void *firmware_ptr)
1849 {
1850 	int sequencer, i;
1851 	const u32 *fw_ptr = firmware_ptr;
1852 
1853 	/* stop sequencers */
1854 	spider_net_write_reg(card, SPIDER_NET_GSINIT,
1855 			     SPIDER_NET_STOP_SEQ_VALUE);
1856 
1857 	for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
1858 	     sequencer++) {
1859 		spider_net_write_reg(card,
1860 				     SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
1861 		for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
1862 			spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
1863 					     sequencer * 8, *fw_ptr);
1864 			fw_ptr++;
1865 		}
1866 	}
1867 
1868 	if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
1869 		return -EIO;
1870 
1871 	spider_net_write_reg(card, SPIDER_NET_GSINIT,
1872 			     SPIDER_NET_RUN_SEQ_VALUE);
1873 
1874 	return 0;
1875 }
1876 
1877 /**
1878  * spider_net_init_firmware - reads in firmware parts
1879  * @card: card structure
1880  *
1881  * Returns 0 on success, <0 on failure
1882  *
1883  * spider_net_init_firmware opens the sequencer firmware and does some basic
1884  * checks. This function opens and releases the firmware structure. A call
1885  * to download the firmware is performed before the release.
1886  *
1887  * Firmware format
1888  * ===============
1889  * spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
1890  * the program for each sequencer. Use the command
1891  *    tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt              \
1892  *         Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt   \
1893  *         Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
1894  *
1895  * to generate spider_fw.bin, if you have sequencer programs with something
1896  * like the following contents for each sequencer:
1897  *    <ONE LINE COMMENT>
1898  *    <FIRST 4-BYTES-WORD FOR SEQUENCER>
1899  *    <SECOND 4-BYTES-WORD FOR SEQUENCER>
1900  *     ...
1901  *    <1024th 4-BYTES-WORD FOR SEQUENCER>
1902  */
1903 static int
spider_net_init_firmware(struct spider_net_card * card)1904 spider_net_init_firmware(struct spider_net_card *card)
1905 {
1906 	struct firmware *firmware = NULL;
1907 	struct device_node *dn;
1908 	const u8 *fw_prop = NULL;
1909 	int err = -ENOENT;
1910 	int fw_size;
1911 
1912 	if (request_firmware((const struct firmware **)&firmware,
1913 			     SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
1914 		if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
1915 		     netif_msg_probe(card) ) {
1916 			dev_err(&card->netdev->dev,
1917 			       "Incorrect size of spidernet firmware in " \
1918 			       "filesystem. Looking in host firmware...\n");
1919 			goto try_host_fw;
1920 		}
1921 		err = spider_net_download_firmware(card, firmware->data);
1922 
1923 		release_firmware(firmware);
1924 		if (err)
1925 			goto try_host_fw;
1926 
1927 		goto done;
1928 	}
1929 
1930 try_host_fw:
1931 	dn = pci_device_to_OF_node(card->pdev);
1932 	if (!dn)
1933 		goto out_err;
1934 
1935 	fw_prop = of_get_property(dn, "firmware", &fw_size);
1936 	if (!fw_prop)
1937 		goto out_err;
1938 
1939 	if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
1940 	     netif_msg_probe(card) ) {
1941 		dev_err(&card->netdev->dev,
1942 		       "Incorrect size of spidernet firmware in host firmware\n");
1943 		goto done;
1944 	}
1945 
1946 	err = spider_net_download_firmware(card, fw_prop);
1947 
1948 done:
1949 	return err;
1950 out_err:
1951 	if (netif_msg_probe(card))
1952 		dev_err(&card->netdev->dev,
1953 		       "Couldn't find spidernet firmware in filesystem " \
1954 		       "or host firmware\n");
1955 	return err;
1956 }
1957 
1958 /**
1959  * spider_net_open - called upon ifonfig up
1960  * @netdev: interface device structure
1961  *
1962  * returns 0 on success, <0 on failure
1963  *
1964  * spider_net_open allocates all the descriptors and memory needed for
1965  * operation, sets up multicast list and enables interrupts
1966  */
1967 int
spider_net_open(struct net_device * netdev)1968 spider_net_open(struct net_device *netdev)
1969 {
1970 	struct spider_net_card *card = netdev_priv(netdev);
1971 	int result;
1972 
1973 	result = spider_net_init_firmware(card);
1974 	if (result)
1975 		goto init_firmware_failed;
1976 
1977 	/* start probing with copper */
1978 	card->aneg_count = 0;
1979 	card->medium = BCM54XX_COPPER;
1980 	spider_net_setup_aneg(card);
1981 	if (card->phy.def->phy_id)
1982 		mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
1983 
1984 	result = spider_net_init_chain(card, &card->tx_chain);
1985 	if (result)
1986 		goto alloc_tx_failed;
1987 	card->low_watermark = NULL;
1988 
1989 	result = spider_net_init_chain(card, &card->rx_chain);
1990 	if (result)
1991 		goto alloc_rx_failed;
1992 
1993 	/* Allocate rx skbs */
1994 	if (spider_net_alloc_rx_skbs(card))
1995 		goto alloc_skbs_failed;
1996 
1997 	spider_net_set_multi(netdev);
1998 
1999 	/* further enhancement: setup hw vlan, if needed */
2000 
2001 	result = -EBUSY;
2002 	if (request_irq(netdev->irq, spider_net_interrupt,
2003 			     IRQF_SHARED, netdev->name, netdev))
2004 		goto register_int_failed;
2005 
2006 	spider_net_enable_card(card);
2007 
2008 	netif_start_queue(netdev);
2009 	netif_carrier_on(netdev);
2010 	napi_enable(&card->napi);
2011 
2012 	spider_net_enable_interrupts(card);
2013 
2014 	return 0;
2015 
2016 register_int_failed:
2017 	spider_net_free_rx_chain_contents(card);
2018 alloc_skbs_failed:
2019 	spider_net_free_chain(card, &card->rx_chain);
2020 alloc_rx_failed:
2021 	spider_net_free_chain(card, &card->tx_chain);
2022 alloc_tx_failed:
2023 	del_timer_sync(&card->aneg_timer);
2024 init_firmware_failed:
2025 	return result;
2026 }
2027 
2028 /**
2029  * spider_net_link_phy
2030  * @data: used for pointer to card structure
2031  *
2032  */
spider_net_link_phy(unsigned long data)2033 static void spider_net_link_phy(unsigned long data)
2034 {
2035 	struct spider_net_card *card = (struct spider_net_card *)data;
2036 	struct mii_phy *phy = &card->phy;
2037 
2038 	/* if link didn't come up after SPIDER_NET_ANEG_TIMEOUT tries, setup phy again */
2039 	if (card->aneg_count > SPIDER_NET_ANEG_TIMEOUT) {
2040 
2041 		pr_debug("%s: link is down trying to bring it up\n",
2042 			 card->netdev->name);
2043 
2044 		switch (card->medium) {
2045 		case BCM54XX_COPPER:
2046 			/* enable fiber with autonegotiation first */
2047 			if (phy->def->ops->enable_fiber)
2048 				phy->def->ops->enable_fiber(phy, 1);
2049 			card->medium = BCM54XX_FIBER;
2050 			break;
2051 
2052 		case BCM54XX_FIBER:
2053 			/* fiber didn't come up, try to disable fiber autoneg */
2054 			if (phy->def->ops->enable_fiber)
2055 				phy->def->ops->enable_fiber(phy, 0);
2056 			card->medium = BCM54XX_UNKNOWN;
2057 			break;
2058 
2059 		case BCM54XX_UNKNOWN:
2060 			/* copper, fiber with and without failed,
2061 			 * retry from beginning */
2062 			spider_net_setup_aneg(card);
2063 			card->medium = BCM54XX_COPPER;
2064 			break;
2065 		}
2066 
2067 		card->aneg_count = 0;
2068 		mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2069 		return;
2070 	}
2071 
2072 	/* link still not up, try again later */
2073 	if (!(phy->def->ops->poll_link(phy))) {
2074 		card->aneg_count++;
2075 		mod_timer(&card->aneg_timer, jiffies + SPIDER_NET_ANEG_TIMER);
2076 		return;
2077 	}
2078 
2079 	/* link came up, get abilities */
2080 	phy->def->ops->read_link(phy);
2081 
2082 	spider_net_write_reg(card, SPIDER_NET_GMACST,
2083 			     spider_net_read_reg(card, SPIDER_NET_GMACST));
2084 	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0x4);
2085 
2086 	if (phy->speed == 1000)
2087 		spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0x00000001);
2088 	else
2089 		spider_net_write_reg(card, SPIDER_NET_GMACMODE, 0);
2090 
2091 	card->aneg_count = 0;
2092 
2093 	pr_info("%s: link up, %i Mbps, %s-duplex %sautoneg.\n",
2094 		card->netdev->name, phy->speed,
2095 		phy->duplex == 1 ? "Full" : "Half",
2096 		phy->autoneg == 1 ? "" : "no ");
2097 
2098 	return;
2099 }
2100 
2101 /**
2102  * spider_net_setup_phy - setup PHY
2103  * @card: card structure
2104  *
2105  * returns 0 on success, <0 on failure
2106  *
2107  * spider_net_setup_phy is used as part of spider_net_probe.
2108  **/
2109 static int
spider_net_setup_phy(struct spider_net_card * card)2110 spider_net_setup_phy(struct spider_net_card *card)
2111 {
2112 	struct mii_phy *phy = &card->phy;
2113 
2114 	spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
2115 			     SPIDER_NET_DMASEL_VALUE);
2116 	spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
2117 			     SPIDER_NET_PHY_CTRL_VALUE);
2118 
2119 	phy->dev = card->netdev;
2120 	phy->mdio_read = spider_net_read_phy;
2121 	phy->mdio_write = spider_net_write_phy;
2122 
2123 	for (phy->mii_id = 1; phy->mii_id <= 31; phy->mii_id++) {
2124 		unsigned short id;
2125 		id = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
2126 		if (id != 0x0000 && id != 0xffff) {
2127 			if (!mii_phy_probe(phy, phy->mii_id)) {
2128 				pr_info("Found %s.\n", phy->def->name);
2129 				break;
2130 			}
2131 		}
2132 	}
2133 
2134 	return 0;
2135 }
2136 
2137 /**
2138  * spider_net_workaround_rxramfull - work around firmware bug
2139  * @card: card structure
2140  *
2141  * no return value
2142  **/
2143 static void
spider_net_workaround_rxramfull(struct spider_net_card * card)2144 spider_net_workaround_rxramfull(struct spider_net_card *card)
2145 {
2146 	int i, sequencer = 0;
2147 
2148 	/* cancel reset */
2149 	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2150 			     SPIDER_NET_CKRCTRL_RUN_VALUE);
2151 
2152 	/* empty sequencer data */
2153 	for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
2154 	     sequencer++) {
2155 		spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
2156 				     sequencer * 8, 0x0);
2157 		for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
2158 			spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
2159 					     sequencer * 8, 0x0);
2160 		}
2161 	}
2162 
2163 	/* set sequencer operation */
2164 	spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
2165 
2166 	/* reset */
2167 	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2168 			     SPIDER_NET_CKRCTRL_STOP_VALUE);
2169 }
2170 
2171 /**
2172  * spider_net_stop - called upon ifconfig down
2173  * @netdev: interface device structure
2174  *
2175  * always returns 0
2176  */
2177 int
spider_net_stop(struct net_device * netdev)2178 spider_net_stop(struct net_device *netdev)
2179 {
2180 	struct spider_net_card *card = netdev_priv(netdev);
2181 
2182 	napi_disable(&card->napi);
2183 	netif_carrier_off(netdev);
2184 	netif_stop_queue(netdev);
2185 	del_timer_sync(&card->tx_timer);
2186 	del_timer_sync(&card->aneg_timer);
2187 
2188 	spider_net_disable_interrupts(card);
2189 
2190 	free_irq(netdev->irq, netdev);
2191 
2192 	spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
2193 			     SPIDER_NET_DMA_TX_FEND_VALUE);
2194 
2195 	/* turn off DMA, force end */
2196 	spider_net_disable_rxdmac(card);
2197 
2198 	/* release chains */
2199 	spider_net_release_tx_chain(card, 1);
2200 	spider_net_free_rx_chain_contents(card);
2201 
2202 	spider_net_free_chain(card, &card->tx_chain);
2203 	spider_net_free_chain(card, &card->rx_chain);
2204 
2205 	return 0;
2206 }
2207 
2208 /**
2209  * spider_net_tx_timeout_task - task scheduled by the watchdog timeout
2210  * function (to be called not under interrupt status)
2211  * @data: data, is interface device structure
2212  *
2213  * called as task when tx hangs, resets interface (if interface is up)
2214  */
2215 static void
spider_net_tx_timeout_task(struct work_struct * work)2216 spider_net_tx_timeout_task(struct work_struct *work)
2217 {
2218 	struct spider_net_card *card =
2219 		container_of(work, struct spider_net_card, tx_timeout_task);
2220 	struct net_device *netdev = card->netdev;
2221 
2222 	if (!(netdev->flags & IFF_UP))
2223 		goto out;
2224 
2225 	netif_device_detach(netdev);
2226 	spider_net_stop(netdev);
2227 
2228 	spider_net_workaround_rxramfull(card);
2229 	spider_net_init_card(card);
2230 
2231 	if (spider_net_setup_phy(card))
2232 		goto out;
2233 
2234 	spider_net_open(netdev);
2235 	spider_net_kick_tx_dma(card);
2236 	netif_device_attach(netdev);
2237 
2238 out:
2239 	atomic_dec(&card->tx_timeout_task_counter);
2240 }
2241 
2242 /**
2243  * spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
2244  * @netdev: interface device structure
2245  *
2246  * called, if tx hangs. Schedules a task that resets the interface
2247  */
2248 static void
spider_net_tx_timeout(struct net_device * netdev)2249 spider_net_tx_timeout(struct net_device *netdev)
2250 {
2251 	struct spider_net_card *card;
2252 
2253 	card = netdev_priv(netdev);
2254 	atomic_inc(&card->tx_timeout_task_counter);
2255 	if (netdev->flags & IFF_UP)
2256 		schedule_work(&card->tx_timeout_task);
2257 	else
2258 		atomic_dec(&card->tx_timeout_task_counter);
2259 	card->spider_stats.tx_timeouts++;
2260 }
2261 
2262 /**
2263  * spider_net_setup_netdev_ops - initialization of net_device operations
2264  * @netdev: net_device structure
2265  *
2266  * fills out function pointers in the net_device structure
2267  */
2268 static void
spider_net_setup_netdev_ops(struct net_device * netdev)2269 spider_net_setup_netdev_ops(struct net_device *netdev)
2270 {
2271 	netdev->open = &spider_net_open;
2272 	netdev->stop = &spider_net_stop;
2273 	netdev->hard_start_xmit = &spider_net_xmit;
2274 	netdev->set_multicast_list = &spider_net_set_multi;
2275 	netdev->set_mac_address = &spider_net_set_mac;
2276 	netdev->change_mtu = &spider_net_change_mtu;
2277 	netdev->do_ioctl = &spider_net_do_ioctl;
2278 	/* tx watchdog */
2279 	netdev->tx_timeout = &spider_net_tx_timeout;
2280 	netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
2281 	/* HW VLAN */
2282 #ifdef CONFIG_NET_POLL_CONTROLLER
2283 	/* poll controller */
2284 	netdev->poll_controller = &spider_net_poll_controller;
2285 #endif /* CONFIG_NET_POLL_CONTROLLER */
2286 	/* ethtool ops */
2287 	netdev->ethtool_ops = &spider_net_ethtool_ops;
2288 }
2289 
2290 /**
2291  * spider_net_setup_netdev - initialization of net_device
2292  * @card: card structure
2293  *
2294  * Returns 0 on success or <0 on failure
2295  *
2296  * spider_net_setup_netdev initializes the net_device structure
2297  **/
2298 static int
spider_net_setup_netdev(struct spider_net_card * card)2299 spider_net_setup_netdev(struct spider_net_card *card)
2300 {
2301 	int result;
2302 	struct net_device *netdev = card->netdev;
2303 	struct device_node *dn;
2304 	struct sockaddr addr;
2305 	const u8 *mac;
2306 
2307 	SET_NETDEV_DEV(netdev, &card->pdev->dev);
2308 
2309 	pci_set_drvdata(card->pdev, netdev);
2310 
2311 	init_timer(&card->tx_timer);
2312 	card->tx_timer.function =
2313 		(void (*)(unsigned long)) spider_net_cleanup_tx_ring;
2314 	card->tx_timer.data = (unsigned long) card;
2315 	netdev->irq = card->pdev->irq;
2316 
2317 	card->aneg_count = 0;
2318 	init_timer(&card->aneg_timer);
2319 	card->aneg_timer.function = spider_net_link_phy;
2320 	card->aneg_timer.data = (unsigned long) card;
2321 
2322 	card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT;
2323 
2324 	netif_napi_add(netdev, &card->napi,
2325 		       spider_net_poll, SPIDER_NET_NAPI_WEIGHT);
2326 
2327 	spider_net_setup_netdev_ops(netdev);
2328 
2329 	netdev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX;
2330 	/* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
2331 	 *		NETIF_F_HW_VLAN_FILTER */
2332 
2333 	netdev->irq = card->pdev->irq;
2334 	card->num_rx_ints = 0;
2335 	card->ignore_rx_ramfull = 0;
2336 
2337 	dn = pci_device_to_OF_node(card->pdev);
2338 	if (!dn)
2339 		return -EIO;
2340 
2341 	mac = of_get_property(dn, "local-mac-address", NULL);
2342 	if (!mac)
2343 		return -EIO;
2344 	memcpy(addr.sa_data, mac, ETH_ALEN);
2345 
2346 	result = spider_net_set_mac(netdev, &addr);
2347 	if ((result) && (netif_msg_probe(card)))
2348 		dev_err(&card->netdev->dev,
2349 		        "Failed to set MAC address: %i\n", result);
2350 
2351 	result = register_netdev(netdev);
2352 	if (result) {
2353 		if (netif_msg_probe(card))
2354 			dev_err(&card->netdev->dev,
2355 			        "Couldn't register net_device: %i\n", result);
2356 		return result;
2357 	}
2358 
2359 	if (netif_msg_probe(card))
2360 		pr_info("Initialized device %s.\n", netdev->name);
2361 
2362 	return 0;
2363 }
2364 
2365 /**
2366  * spider_net_alloc_card - allocates net_device and card structure
2367  *
2368  * returns the card structure or NULL in case of errors
2369  *
2370  * the card and net_device structures are linked to each other
2371  */
2372 static struct spider_net_card *
spider_net_alloc_card(void)2373 spider_net_alloc_card(void)
2374 {
2375 	struct net_device *netdev;
2376 	struct spider_net_card *card;
2377 	size_t alloc_size;
2378 
2379 	alloc_size = sizeof(struct spider_net_card) +
2380 	   (tx_descriptors + rx_descriptors) * sizeof(struct spider_net_descr);
2381 	netdev = alloc_etherdev(alloc_size);
2382 	if (!netdev)
2383 		return NULL;
2384 
2385 	card = netdev_priv(netdev);
2386 	card->netdev = netdev;
2387 	card->msg_enable = SPIDER_NET_DEFAULT_MSG;
2388 	INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task);
2389 	init_waitqueue_head(&card->waitq);
2390 	atomic_set(&card->tx_timeout_task_counter, 0);
2391 
2392 	card->rx_chain.num_desc = rx_descriptors;
2393 	card->rx_chain.ring = card->darray;
2394 	card->tx_chain.num_desc = tx_descriptors;
2395 	card->tx_chain.ring = card->darray + rx_descriptors;
2396 
2397 	return card;
2398 }
2399 
2400 /**
2401  * spider_net_undo_pci_setup - releases PCI ressources
2402  * @card: card structure
2403  *
2404  * spider_net_undo_pci_setup releases the mapped regions
2405  */
2406 static void
spider_net_undo_pci_setup(struct spider_net_card * card)2407 spider_net_undo_pci_setup(struct spider_net_card *card)
2408 {
2409 	iounmap(card->regs);
2410 	pci_release_regions(card->pdev);
2411 }
2412 
2413 /**
2414  * spider_net_setup_pci_dev - sets up the device in terms of PCI operations
2415  * @pdev: PCI device
2416  *
2417  * Returns the card structure or NULL if any errors occur
2418  *
2419  * spider_net_setup_pci_dev initializes pdev and together with the
2420  * functions called in spider_net_open configures the device so that
2421  * data can be transferred over it
2422  * The net_device structure is attached to the card structure, if the
2423  * function returns without error.
2424  **/
2425 static struct spider_net_card *
spider_net_setup_pci_dev(struct pci_dev * pdev)2426 spider_net_setup_pci_dev(struct pci_dev *pdev)
2427 {
2428 	struct spider_net_card *card;
2429 	unsigned long mmio_start, mmio_len;
2430 
2431 	if (pci_enable_device(pdev)) {
2432 		dev_err(&pdev->dev, "Couldn't enable PCI device\n");
2433 		return NULL;
2434 	}
2435 
2436 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
2437 		dev_err(&pdev->dev,
2438 		        "Couldn't find proper PCI device base address.\n");
2439 		goto out_disable_dev;
2440 	}
2441 
2442 	if (pci_request_regions(pdev, spider_net_driver_name)) {
2443 		dev_err(&pdev->dev,
2444 		        "Couldn't obtain PCI resources, aborting.\n");
2445 		goto out_disable_dev;
2446 	}
2447 
2448 	pci_set_master(pdev);
2449 
2450 	card = spider_net_alloc_card();
2451 	if (!card) {
2452 		dev_err(&pdev->dev,
2453 		        "Couldn't allocate net_device structure, aborting.\n");
2454 		goto out_release_regions;
2455 	}
2456 	card->pdev = pdev;
2457 
2458 	/* fetch base address and length of first resource */
2459 	mmio_start = pci_resource_start(pdev, 0);
2460 	mmio_len = pci_resource_len(pdev, 0);
2461 
2462 	card->netdev->mem_start = mmio_start;
2463 	card->netdev->mem_end = mmio_start + mmio_len;
2464 	card->regs = ioremap(mmio_start, mmio_len);
2465 
2466 	if (!card->regs) {
2467 		dev_err(&pdev->dev,
2468 		        "Couldn't obtain PCI resources, aborting.\n");
2469 		goto out_release_regions;
2470 	}
2471 
2472 	return card;
2473 
2474 out_release_regions:
2475 	pci_release_regions(pdev);
2476 out_disable_dev:
2477 	pci_disable_device(pdev);
2478 	pci_set_drvdata(pdev, NULL);
2479 	return NULL;
2480 }
2481 
2482 /**
2483  * spider_net_probe - initialization of a device
2484  * @pdev: PCI device
2485  * @ent: entry in the device id list
2486  *
2487  * Returns 0 on success, <0 on failure
2488  *
2489  * spider_net_probe initializes pdev and registers a net_device
2490  * structure for it. After that, the device can be ifconfig'ed up
2491  **/
2492 static int __devinit
spider_net_probe(struct pci_dev * pdev,const struct pci_device_id * ent)2493 spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2494 {
2495 	int err = -EIO;
2496 	struct spider_net_card *card;
2497 
2498 	card = spider_net_setup_pci_dev(pdev);
2499 	if (!card)
2500 		goto out;
2501 
2502 	spider_net_workaround_rxramfull(card);
2503 	spider_net_init_card(card);
2504 
2505 	err = spider_net_setup_phy(card);
2506 	if (err)
2507 		goto out_undo_pci;
2508 
2509 	err = spider_net_setup_netdev(card);
2510 	if (err)
2511 		goto out_undo_pci;
2512 
2513 	return 0;
2514 
2515 out_undo_pci:
2516 	spider_net_undo_pci_setup(card);
2517 	free_netdev(card->netdev);
2518 out:
2519 	return err;
2520 }
2521 
2522 /**
2523  * spider_net_remove - removal of a device
2524  * @pdev: PCI device
2525  *
2526  * Returns 0 on success, <0 on failure
2527  *
2528  * spider_net_remove is called to remove the device and unregisters the
2529  * net_device
2530  **/
2531 static void __devexit
spider_net_remove(struct pci_dev * pdev)2532 spider_net_remove(struct pci_dev *pdev)
2533 {
2534 	struct net_device *netdev;
2535 	struct spider_net_card *card;
2536 
2537 	netdev = pci_get_drvdata(pdev);
2538 	card = netdev_priv(netdev);
2539 
2540 	wait_event(card->waitq,
2541 		   atomic_read(&card->tx_timeout_task_counter) == 0);
2542 
2543 	unregister_netdev(netdev);
2544 
2545 	/* switch off card */
2546 	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2547 			     SPIDER_NET_CKRCTRL_STOP_VALUE);
2548 	spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
2549 			     SPIDER_NET_CKRCTRL_RUN_VALUE);
2550 
2551 	spider_net_undo_pci_setup(card);
2552 	free_netdev(netdev);
2553 }
2554 
2555 static struct pci_driver spider_net_driver = {
2556 	.name		= spider_net_driver_name,
2557 	.id_table	= spider_net_pci_tbl,
2558 	.probe		= spider_net_probe,
2559 	.remove		= __devexit_p(spider_net_remove)
2560 };
2561 
2562 /**
2563  * spider_net_init - init function when the driver is loaded
2564  *
2565  * spider_net_init registers the device driver
2566  */
spider_net_init(void)2567 static int __init spider_net_init(void)
2568 {
2569 	printk(KERN_INFO "Spidernet version %s.\n", VERSION);
2570 
2571 	if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
2572 		rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
2573 		pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2574 	}
2575 	if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
2576 		rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
2577 		pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
2578 	}
2579 	if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
2580 		tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
2581 		pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2582 	}
2583 	if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
2584 		tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
2585 		pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
2586 	}
2587 
2588 	return pci_register_driver(&spider_net_driver);
2589 }
2590 
2591 /**
2592  * spider_net_cleanup - exit function when driver is unloaded
2593  *
2594  * spider_net_cleanup unregisters the device driver
2595  */
spider_net_cleanup(void)2596 static void __exit spider_net_cleanup(void)
2597 {
2598 	pci_unregister_driver(&spider_net_driver);
2599 }
2600 
2601 module_init(spider_net_init);
2602 module_exit(spider_net_cleanup);
2603