1 /* Geode LX framebuffer driver
2 *
3 * Copyright (C) 2006-2007, Advanced Micro Devices,Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/errno.h>
13 #include <linux/fb.h>
14 #include <linux/uaccess.h>
15 #include <linux/delay.h>
16 #include <asm/geode.h>
17
18 #include "lxfb.h"
19
20 /* TODO
21 * Support panel scaling
22 * Add acceleration
23 * Add support for interlacing (TV out)
24 * Support compression
25 */
26
27 /* This is the complete list of PLL frequencies that we can set -
28 * we will choose the closest match to the incoming clock.
29 * freq is the frequency of the dotclock * 1000 (for example,
30 * 24823 = 24.983 Mhz).
31 * pllval is the corresponding PLL value
32 */
33
34 static const struct {
35 unsigned int pllval;
36 unsigned int freq;
37 } pll_table[] = {
38 { 0x000131AC, 6231 },
39 { 0x0001215D, 6294 },
40 { 0x00011087, 6750 },
41 { 0x0001216C, 7081 },
42 { 0x0001218D, 7140 },
43 { 0x000110C9, 7800 },
44 { 0x00013147, 7875 },
45 { 0x000110A7, 8258 },
46 { 0x00012159, 8778 },
47 { 0x00014249, 8875 },
48 { 0x00010057, 9000 },
49 { 0x0001219A, 9472 },
50 { 0x00012158, 9792 },
51 { 0x00010045, 10000 },
52 { 0x00010089, 10791 },
53 { 0x000110E7, 11225 },
54 { 0x00012136, 11430 },
55 { 0x00013207, 12375 },
56 { 0x00012187, 12500 },
57 { 0x00014286, 14063 },
58 { 0x000110E5, 15016 },
59 { 0x00014214, 16250 },
60 { 0x00011105, 17045 },
61 { 0x000131E4, 18563 },
62 { 0x00013183, 18750 },
63 { 0x00014284, 19688 },
64 { 0x00011104, 20400 },
65 { 0x00016363, 23625 },
66 { 0x000031AC, 24923 },
67 { 0x0000215D, 25175 },
68 { 0x00001087, 27000 },
69 { 0x0000216C, 28322 },
70 { 0x0000218D, 28560 },
71 { 0x000010C9, 31200 },
72 { 0x00003147, 31500 },
73 { 0x000010A7, 33032 },
74 { 0x00002159, 35112 },
75 { 0x00004249, 35500 },
76 { 0x00000057, 36000 },
77 { 0x0000219A, 37889 },
78 { 0x00002158, 39168 },
79 { 0x00000045, 40000 },
80 { 0x00000089, 43163 },
81 { 0x000010E7, 44900 },
82 { 0x00002136, 45720 },
83 { 0x00003207, 49500 },
84 { 0x00002187, 50000 },
85 { 0x00004286, 56250 },
86 { 0x000010E5, 60065 },
87 { 0x00004214, 65000 },
88 { 0x00001105, 68179 },
89 { 0x000031E4, 74250 },
90 { 0x00003183, 75000 },
91 { 0x00004284, 78750 },
92 { 0x00001104, 81600 },
93 { 0x00006363, 94500 },
94 { 0x00005303, 97520 },
95 { 0x00002183, 100187 },
96 { 0x00002122, 101420 },
97 { 0x00001081, 108000 },
98 { 0x00006201, 113310 },
99 { 0x00000041, 119650 },
100 { 0x000041A1, 129600 },
101 { 0x00002182, 133500 },
102 { 0x000041B1, 135000 },
103 { 0x00000051, 144000 },
104 { 0x000041E1, 148500 },
105 { 0x000062D1, 157500 },
106 { 0x000031A1, 162000 },
107 { 0x00000061, 169203 },
108 { 0x00004231, 172800 },
109 { 0x00002151, 175500 },
110 { 0x000052E1, 189000 },
111 { 0x00000071, 192000 },
112 { 0x00003201, 198000 },
113 { 0x00004291, 202500 },
114 { 0x00001101, 204750 },
115 { 0x00007481, 218250 },
116 { 0x00004170, 229500 },
117 { 0x00006210, 234000 },
118 { 0x00003140, 251182 },
119 { 0x00006250, 261000 },
120 { 0x000041C0, 278400 },
121 { 0x00005220, 280640 },
122 { 0x00000050, 288000 },
123 { 0x000041E0, 297000 },
124 { 0x00002130, 320207 }
125 };
126
127
lx_set_dotpll(u32 pllval)128 static void lx_set_dotpll(u32 pllval)
129 {
130 u32 dotpll_lo, dotpll_hi;
131 int i;
132
133 rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
134
135 if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
136 return;
137
138 dotpll_hi = pllval;
139 dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX);
140 dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET;
141
142 wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
143
144 /* Wait 100us for the PLL to lock */
145
146 udelay(100);
147
148 /* Now, loop for the lock bit */
149
150 for (i = 0; i < 1000; i++) {
151 rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
152 if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK)
153 break;
154 }
155
156 /* Clear the reset bit */
157
158 dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET;
159 wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
160 }
161
162 /* Set the clock based on the frequency specified by the current mode */
163
lx_set_clock(struct fb_info * info)164 static void lx_set_clock(struct fb_info *info)
165 {
166 unsigned int diff, min, best = 0;
167 unsigned int freq, i;
168
169 freq = (unsigned int) (1000000000 / info->var.pixclock);
170
171 min = abs(pll_table[0].freq - freq);
172
173 for (i = 0; i < ARRAY_SIZE(pll_table); i++) {
174 diff = abs(pll_table[i].freq - freq);
175 if (diff < min) {
176 min = diff;
177 best = i;
178 }
179 }
180
181 lx_set_dotpll(pll_table[best].pllval & 0x00017FFF);
182 }
183
lx_graphics_disable(struct fb_info * info)184 static void lx_graphics_disable(struct fb_info *info)
185 {
186 struct lxfb_par *par = info->par;
187 unsigned int val, gcfg;
188
189 /* Note: This assumes that the video is in a quitet state */
190
191 write_vp(par, VP_A1T, 0);
192 write_vp(par, VP_A2T, 0);
193 write_vp(par, VP_A3T, 0);
194
195 /* Turn off the VGA and video enable */
196 val = read_dc(par, DC_GENERAL_CFG) & ~(DC_GENERAL_CFG_VGAE |
197 DC_GENERAL_CFG_VIDE);
198
199 write_dc(par, DC_GENERAL_CFG, val);
200
201 val = read_vp(par, VP_VCFG) & ~VP_VCFG_VID_EN;
202 write_vp(par, VP_VCFG, val);
203
204 write_dc(par, DC_IRQ, DC_IRQ_MASK | DC_IRQ_VIP_VSYNC_LOSS_IRQ_MASK |
205 DC_IRQ_STATUS | DC_IRQ_VIP_VSYNC_IRQ_STATUS);
206
207 val = read_dc(par, DC_GENLK_CTL) & ~DC_GENLK_CTL_GENLK_EN;
208 write_dc(par, DC_GENLK_CTL, val);
209
210 val = read_dc(par, DC_CLR_KEY);
211 write_dc(par, DC_CLR_KEY, val & ~DC_CLR_KEY_CLR_KEY_EN);
212
213 /* turn off the panel */
214 write_fp(par, FP_PM, read_fp(par, FP_PM) & ~FP_PM_P);
215
216 val = read_vp(par, VP_MISC) | VP_MISC_DACPWRDN;
217 write_vp(par, VP_MISC, val);
218
219 /* Turn off the display */
220
221 val = read_vp(par, VP_DCFG);
222 write_vp(par, VP_DCFG, val & ~(VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN |
223 VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN));
224
225 gcfg = read_dc(par, DC_GENERAL_CFG);
226 gcfg &= ~(DC_GENERAL_CFG_CMPE | DC_GENERAL_CFG_DECE);
227 write_dc(par, DC_GENERAL_CFG, gcfg);
228
229 /* Turn off the TGEN */
230 val = read_dc(par, DC_DISPLAY_CFG);
231 val &= ~DC_DISPLAY_CFG_TGEN;
232 write_dc(par, DC_DISPLAY_CFG, val);
233
234 /* Wait 1000 usecs to ensure that the TGEN is clear */
235 udelay(1000);
236
237 /* Turn off the FIFO loader */
238
239 gcfg &= ~DC_GENERAL_CFG_DFLE;
240 write_dc(par, DC_GENERAL_CFG, gcfg);
241
242 /* Lastly, wait for the GP to go idle */
243
244 do {
245 val = read_gp(par, GP_BLT_STATUS);
246 } while ((val & GP_BLT_STATUS_PB) || !(val & GP_BLT_STATUS_CE));
247 }
248
lx_graphics_enable(struct fb_info * info)249 static void lx_graphics_enable(struct fb_info *info)
250 {
251 struct lxfb_par *par = info->par;
252 u32 temp, config;
253
254 /* Set the video request register */
255 write_vp(par, VP_VRR, 0);
256
257 /* Set up the polarities */
258
259 config = read_vp(par, VP_DCFG);
260
261 config &= ~(VP_DCFG_CRT_SYNC_SKW | VP_DCFG_PWR_SEQ_DELAY |
262 VP_DCFG_CRT_HSYNC_POL | VP_DCFG_CRT_VSYNC_POL);
263
264 config |= (VP_DCFG_CRT_SYNC_SKW_DEFAULT | VP_DCFG_PWR_SEQ_DELAY_DEFAULT
265 | VP_DCFG_GV_GAM);
266
267 if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
268 config |= VP_DCFG_CRT_HSYNC_POL;
269
270 if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
271 config |= VP_DCFG_CRT_VSYNC_POL;
272
273 if (par->output & OUTPUT_PANEL) {
274 u32 msrlo, msrhi;
275
276 write_fp(par, FP_PT1, 0);
277 write_fp(par, FP_PT2, FP_PT2_SCRC);
278 write_fp(par, FP_DFC, FP_DFC_BC);
279
280 msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW;
281 msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH;
282
283 wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
284 }
285
286 if (par->output & OUTPUT_CRT) {
287 config |= VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN |
288 VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN;
289 }
290
291 write_vp(par, VP_DCFG, config);
292
293 /* Turn the CRT dacs back on */
294
295 if (par->output & OUTPUT_CRT) {
296 temp = read_vp(par, VP_MISC);
297 temp &= ~(VP_MISC_DACPWRDN | VP_MISC_APWRDN);
298 write_vp(par, VP_MISC, temp);
299 }
300
301 /* Turn the panel on (if it isn't already) */
302 if (par->output & OUTPUT_PANEL)
303 write_fp(par, FP_PM, read_fp(par, FP_PM) | FP_PM_P);
304 }
305
lx_framebuffer_size(void)306 unsigned int lx_framebuffer_size(void)
307 {
308 unsigned int val;
309
310 if (!geode_has_vsa2()) {
311 uint32_t hi, lo;
312
313 /* The number of pages is (PMAX - PMIN)+1 */
314 rdmsr(MSR_GLIU_P2D_RO0, lo, hi);
315
316 /* PMAX */
317 val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
318 /* PMIN */
319 val -= (lo & 0x000fffff);
320 val += 1;
321
322 /* The page size is 4k */
323 return (val << 12);
324 }
325
326 /* The frame buffer size is reported by a VSM in VSA II */
327 /* Virtual Register Class = 0x02 */
328 /* VG_MEM_SIZE (1MB units) = 0x00 */
329
330 outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
331 outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX);
332
333 val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFE;
334 return (val << 20);
335 }
336
lx_set_mode(struct fb_info * info)337 void lx_set_mode(struct fb_info *info)
338 {
339 struct lxfb_par *par = info->par;
340 u64 msrval;
341
342 unsigned int max, dv, val, size;
343
344 unsigned int gcfg, dcfg;
345 int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
346 int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
347
348 /* Unlock the DC registers */
349 write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
350
351 lx_graphics_disable(info);
352
353 lx_set_clock(info);
354
355 /* Set output mode */
356
357 rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
358 msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT;
359
360 if (par->output & OUTPUT_PANEL) {
361 msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP;
362
363 if (par->output & OUTPUT_CRT)
364 msrval |= MSR_LX_GLD_MSR_CONFIG_FPC;
365 else
366 msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC;
367 } else
368 msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT;
369
370 wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
371
372 /* Clear the various buffers */
373 /* FIXME: Adjust for panning here */
374
375 write_dc(par, DC_FB_ST_OFFSET, 0);
376 write_dc(par, DC_CB_ST_OFFSET, 0);
377 write_dc(par, DC_CURS_ST_OFFSET, 0);
378
379 /* FIXME: Add support for interlacing */
380 /* FIXME: Add support for scaling */
381
382 val = read_dc(par, DC_GENLK_CTL);
383 val &= ~(DC_GENLK_CTL_ALPHA_FLICK_EN | DC_GENLK_CTL_FLICK_EN |
384 DC_GENLK_CTL_FLICK_SEL_MASK);
385
386 /* Default scaling params */
387
388 write_dc(par, DC_GFX_SCALE, (0x4000 << 16) | 0x4000);
389 write_dc(par, DC_IRQ_FILT_CTL, 0);
390 write_dc(par, DC_GENLK_CTL, val);
391
392 /* FIXME: Support compression */
393
394 if (info->fix.line_length > 4096)
395 dv = DC_DV_CTL_DV_LINE_SIZE_8K;
396 else if (info->fix.line_length > 2048)
397 dv = DC_DV_CTL_DV_LINE_SIZE_4K;
398 else if (info->fix.line_length > 1024)
399 dv = DC_DV_CTL_DV_LINE_SIZE_2K;
400 else
401 dv = DC_DV_CTL_DV_LINE_SIZE_1K;
402
403 max = info->fix.line_length * info->var.yres;
404 max = (max + 0x3FF) & 0xFFFFFC00;
405
406 write_dc(par, DC_DV_TOP, max | DC_DV_TOP_DV_TOP_EN);
407
408 val = read_dc(par, DC_DV_CTL) & ~DC_DV_CTL_DV_LINE_SIZE;
409 write_dc(par, DC_DV_CTL, val | dv);
410
411 size = info->var.xres * (info->var.bits_per_pixel >> 3);
412
413 write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
414 write_dc(par, DC_LINE_SIZE, (size + 7) >> 3);
415
416 /* Set default watermark values */
417
418 rdmsrl(MSR_LX_SPARE_MSR, msrval);
419
420 msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO
421 | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL
422 | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M
423 | MSR_LX_SPARE_MSR_WM_LPEN_OVRD);
424 msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM |
425 MSR_LX_SPARE_MSR_DIS_INIT_V_PRI;
426 wrmsrl(MSR_LX_SPARE_MSR, msrval);
427
428 gcfg = DC_GENERAL_CFG_DFLE; /* Display fifo enable */
429 gcfg |= (0x6 << DC_GENERAL_CFG_DFHPSL_SHIFT) | /* default priority */
430 (0xb << DC_GENERAL_CFG_DFHPEL_SHIFT);
431 gcfg |= DC_GENERAL_CFG_FDTY; /* Set the frame dirty mode */
432
433 dcfg = DC_DISPLAY_CFG_VDEN; /* Enable video data */
434 dcfg |= DC_DISPLAY_CFG_GDEN; /* Enable graphics */
435 dcfg |= DC_DISPLAY_CFG_TGEN; /* Turn on the timing generator */
436 dcfg |= DC_DISPLAY_CFG_TRUP; /* Update timings immediately */
437 dcfg |= DC_DISPLAY_CFG_PALB; /* Palette bypass in > 8 bpp modes */
438 dcfg |= DC_DISPLAY_CFG_VISL;
439 dcfg |= DC_DISPLAY_CFG_DCEN; /* Always center the display */
440
441 /* Set the current BPP mode */
442
443 switch (info->var.bits_per_pixel) {
444 case 8:
445 dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP;
446 break;
447
448 case 16:
449 dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP;
450 break;
451
452 case 32:
453 case 24:
454 dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP;
455 break;
456 }
457
458 /* Now - set up the timings */
459
460 hactive = info->var.xres;
461 hblankstart = hactive;
462 hsyncstart = hblankstart + info->var.right_margin;
463 hsyncend = hsyncstart + info->var.hsync_len;
464 hblankend = hsyncend + info->var.left_margin;
465 htotal = hblankend;
466
467 vactive = info->var.yres;
468 vblankstart = vactive;
469 vsyncstart = vblankstart + info->var.lower_margin;
470 vsyncend = vsyncstart + info->var.vsync_len;
471 vblankend = vsyncend + info->var.upper_margin;
472 vtotal = vblankend;
473
474 write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) | ((htotal - 1) << 16));
475 write_dc(par, DC_H_BLANK_TIMING,
476 (hblankstart - 1) | ((hblankend - 1) << 16));
477 write_dc(par, DC_H_SYNC_TIMING,
478 (hsyncstart - 1) | ((hsyncend - 1) << 16));
479
480 write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) | ((vtotal - 1) << 16));
481 write_dc(par, DC_V_BLANK_TIMING,
482 (vblankstart - 1) | ((vblankend - 1) << 16));
483 write_dc(par, DC_V_SYNC_TIMING,
484 (vsyncstart - 1) | ((vsyncend - 1) << 16));
485
486 write_dc(par, DC_FB_ACTIVE,
487 (info->var.xres - 1) << 16 | (info->var.yres - 1));
488
489 /* And re-enable the graphics output */
490 lx_graphics_enable(info);
491
492 /* Write the two main configuration registers */
493 write_dc(par, DC_DISPLAY_CFG, dcfg);
494 write_dc(par, DC_ARB_CFG, 0);
495 write_dc(par, DC_GENERAL_CFG, gcfg);
496
497 /* Lock the DC registers */
498 write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
499 }
500
lx_set_palette_reg(struct fb_info * info,unsigned regno,unsigned red,unsigned green,unsigned blue)501 void lx_set_palette_reg(struct fb_info *info, unsigned regno,
502 unsigned red, unsigned green, unsigned blue)
503 {
504 struct lxfb_par *par = info->par;
505 int val;
506
507 /* Hardware palette is in RGB 8-8-8 format. */
508
509 val = (red << 8) & 0xff0000;
510 val |= (green) & 0x00ff00;
511 val |= (blue >> 8) & 0x0000ff;
512
513 write_dc(par, DC_PAL_ADDRESS, regno);
514 write_dc(par, DC_PAL_DATA, val);
515 }
516
lx_blank_display(struct fb_info * info,int blank_mode)517 int lx_blank_display(struct fb_info *info, int blank_mode)
518 {
519 struct lxfb_par *par = info->par;
520 u32 dcfg, misc, fp_pm;
521 int blank, hsync, vsync;
522
523 /* CRT power saving modes. */
524 switch (blank_mode) {
525 case FB_BLANK_UNBLANK:
526 blank = 0; hsync = 1; vsync = 1;
527 break;
528 case FB_BLANK_NORMAL:
529 blank = 1; hsync = 1; vsync = 1;
530 break;
531 case FB_BLANK_VSYNC_SUSPEND:
532 blank = 1; hsync = 1; vsync = 0;
533 break;
534 case FB_BLANK_HSYNC_SUSPEND:
535 blank = 1; hsync = 0; vsync = 1;
536 break;
537 case FB_BLANK_POWERDOWN:
538 blank = 1; hsync = 0; vsync = 0;
539 break;
540 default:
541 return -EINVAL;
542 }
543
544 dcfg = read_vp(par, VP_DCFG);
545 dcfg &= ~(VP_DCFG_DAC_BL_EN | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN |
546 VP_DCFG_CRT_EN);
547 if (!blank)
548 dcfg |= VP_DCFG_DAC_BL_EN | VP_DCFG_CRT_EN;
549 if (hsync)
550 dcfg |= VP_DCFG_HSYNC_EN;
551 if (vsync)
552 dcfg |= VP_DCFG_VSYNC_EN;
553
554 write_vp(par, VP_DCFG, dcfg);
555
556 misc = read_vp(par, VP_MISC);
557
558 if (vsync && hsync)
559 misc &= ~VP_MISC_DACPWRDN;
560 else
561 misc |= VP_MISC_DACPWRDN;
562
563 write_vp(par, VP_MISC, misc);
564
565 /* Power on/off flat panel */
566
567 if (par->output & OUTPUT_PANEL) {
568 fp_pm = read_fp(par, FP_PM);
569 if (blank_mode == FB_BLANK_POWERDOWN)
570 fp_pm &= ~FP_PM_P;
571 else
572 fp_pm |= FP_PM_P;
573 write_fp(par, FP_PM, fp_pm);
574 }
575
576 return 0;
577 }
578
579 #ifdef CONFIG_PM
580
lx_save_regs(struct lxfb_par * par)581 static void lx_save_regs(struct lxfb_par *par)
582 {
583 uint32_t filt;
584 int i;
585
586 /* wait for the BLT engine to stop being busy */
587 do {
588 i = read_gp(par, GP_BLT_STATUS);
589 } while ((i & GP_BLT_STATUS_PB) || !(i & GP_BLT_STATUS_CE));
590
591 /* save MSRs */
592 rdmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
593 rdmsrl(MSR_GLCP_DOTPLL, par->msr.dotpll);
594 rdmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
595 rdmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
596
597 write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
598
599 /* save registers */
600 memcpy(par->gp, par->gp_regs, sizeof(par->gp));
601 memcpy(par->dc, par->dc_regs, sizeof(par->dc));
602 memcpy(par->vp, par->vp_regs, sizeof(par->vp));
603 memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
604
605 /* save the palette */
606 write_dc(par, DC_PAL_ADDRESS, 0);
607 for (i = 0; i < ARRAY_SIZE(par->pal); i++)
608 par->pal[i] = read_dc(par, DC_PAL_DATA);
609
610 /* save the horizontal filter coefficients */
611 filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
612 for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
613 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
614 par->hcoeff[i] = read_dc(par, DC_FILT_COEFF1);
615 par->hcoeff[i + 1] = read_dc(par, DC_FILT_COEFF2);
616 }
617
618 /* save the vertical filter coefficients */
619 filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
620 for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
621 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
622 par->vcoeff[i] = read_dc(par, DC_FILT_COEFF1);
623 }
624
625 /* save video coeff ram */
626 memcpy(par->vp_coeff, par->vp_regs + VP_VCR, sizeof(par->vp_coeff));
627 }
628
lx_restore_gfx_proc(struct lxfb_par * par)629 static void lx_restore_gfx_proc(struct lxfb_par *par)
630 {
631 int i;
632
633 /* a bunch of registers require GP_RASTER_MODE to be set first */
634 write_gp(par, GP_RASTER_MODE, par->gp[GP_RASTER_MODE]);
635
636 for (i = 0; i < ARRAY_SIZE(par->gp); i++) {
637 switch (i) {
638 case GP_RASTER_MODE:
639 case GP_VECTOR_MODE:
640 case GP_BLT_MODE:
641 case GP_BLT_STATUS:
642 case GP_HST_SRC:
643 /* FIXME: restore LUT data */
644 case GP_LUT_INDEX:
645 case GP_LUT_DATA:
646 /* don't restore these registers */
647 break;
648
649 default:
650 write_gp(par, i, par->gp[i]);
651 }
652 }
653 }
654
lx_restore_display_ctlr(struct lxfb_par * par)655 static void lx_restore_display_ctlr(struct lxfb_par *par)
656 {
657 uint32_t filt;
658 int i;
659
660 wrmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
661
662 for (i = 0; i < ARRAY_SIZE(par->dc); i++) {
663 switch (i) {
664 case DC_UNLOCK:
665 /* unlock the DC; runs first */
666 write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
667 break;
668
669 case DC_GENERAL_CFG:
670 case DC_DISPLAY_CFG:
671 /* disable all while restoring */
672 write_dc(par, i, 0);
673 break;
674
675 case DC_DV_CTL:
676 /* set all ram to dirty */
677 write_dc(par, i, par->dc[i] | DC_DV_CTL_CLEAR_DV_RAM);
678
679 case DC_RSVD_1:
680 case DC_RSVD_2:
681 case DC_RSVD_3:
682 case DC_LINE_CNT:
683 case DC_PAL_ADDRESS:
684 case DC_PAL_DATA:
685 case DC_DFIFO_DIAG:
686 case DC_CFIFO_DIAG:
687 case DC_FILT_COEFF1:
688 case DC_FILT_COEFF2:
689 case DC_RSVD_4:
690 case DC_RSVD_5:
691 /* don't restore these registers */
692 break;
693
694 default:
695 write_dc(par, i, par->dc[i]);
696 }
697 }
698
699 /* restore the palette */
700 write_dc(par, DC_PAL_ADDRESS, 0);
701 for (i = 0; i < ARRAY_SIZE(par->pal); i++)
702 write_dc(par, DC_PAL_DATA, par->pal[i]);
703
704 /* restore the horizontal filter coefficients */
705 filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
706 for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
707 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
708 write_dc(par, DC_FILT_COEFF1, par->hcoeff[i]);
709 write_dc(par, DC_FILT_COEFF2, par->hcoeff[i + 1]);
710 }
711
712 /* restore the vertical filter coefficients */
713 filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
714 for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
715 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
716 write_dc(par, DC_FILT_COEFF1, par->vcoeff[i]);
717 }
718 }
719
lx_restore_video_proc(struct lxfb_par * par)720 static void lx_restore_video_proc(struct lxfb_par *par)
721 {
722 int i;
723
724 wrmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
725 wrmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
726
727 for (i = 0; i < ARRAY_SIZE(par->vp); i++) {
728 switch (i) {
729 case VP_VCFG:
730 case VP_DCFG:
731 case VP_PAR:
732 case VP_PDR:
733 case VP_CCS:
734 case VP_RSVD_0:
735 /* case VP_VDC: */ /* why should this not be restored? */
736 case VP_RSVD_1:
737 case VP_CRC32:
738 /* don't restore these registers */
739 break;
740
741 default:
742 write_vp(par, i, par->vp[i]);
743 }
744 }
745
746 /* restore video coeff ram */
747 memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
748 }
749
lx_restore_regs(struct lxfb_par * par)750 static void lx_restore_regs(struct lxfb_par *par)
751 {
752 int i;
753
754 lx_set_dotpll((u32) (par->msr.dotpll >> 32));
755 lx_restore_gfx_proc(par);
756 lx_restore_display_ctlr(par);
757 lx_restore_video_proc(par);
758
759 /* Flat Panel */
760 for (i = 0; i < ARRAY_SIZE(par->fp); i++) {
761 switch (i) {
762 case FP_PM:
763 case FP_RSVD_0:
764 case FP_RSVD_1:
765 case FP_RSVD_2:
766 case FP_RSVD_3:
767 case FP_RSVD_4:
768 /* don't restore these registers */
769 break;
770
771 default:
772 write_fp(par, i, par->fp[i]);
773 }
774 }
775
776 /* control the panel */
777 if (par->fp[FP_PM] & FP_PM_P) {
778 /* power on the panel if not already power{ed,ing} on */
779 if (!(read_fp(par, FP_PM) &
780 (FP_PM_PANEL_ON|FP_PM_PANEL_PWR_UP)))
781 write_fp(par, FP_PM, par->fp[FP_PM]);
782 } else {
783 /* power down the panel if not already power{ed,ing} down */
784 if (!(read_fp(par, FP_PM) &
785 (FP_PM_PANEL_OFF|FP_PM_PANEL_PWR_DOWN)))
786 write_fp(par, FP_PM, par->fp[FP_PM]);
787 }
788
789 /* turn everything on */
790 write_vp(par, VP_VCFG, par->vp[VP_VCFG]);
791 write_vp(par, VP_DCFG, par->vp[VP_DCFG]);
792 write_dc(par, DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG]);
793 /* do this last; it will enable the FIFO load */
794 write_dc(par, DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG]);
795
796 /* lock the door behind us */
797 write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
798 }
799
lx_powerdown(struct fb_info * info)800 int lx_powerdown(struct fb_info *info)
801 {
802 struct lxfb_par *par = info->par;
803
804 if (par->powered_down)
805 return 0;
806
807 lx_save_regs(par);
808 lx_graphics_disable(info);
809
810 par->powered_down = 1;
811 return 0;
812 }
813
lx_powerup(struct fb_info * info)814 int lx_powerup(struct fb_info *info)
815 {
816 struct lxfb_par *par = info->par;
817
818 if (!par->powered_down)
819 return 0;
820
821 lx_restore_regs(par);
822
823 par->powered_down = 0;
824 return 0;
825 }
826
827 #endif
828