• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Low-level PXA250/210 sleep/wakeUp support
3 *
4 * Initial SA1110 code:
5 * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
6 *
7 * Adapted for PXA by Nicolas Pitre:
8 * Copyright (c) 2002 Monta Vista Software, Inc.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License.
12 */
13
14#include <linux/linkage.h>
15#include <asm/assembler.h>
16#include <mach/hardware.h>
17#include <mach/smemc.h>
18#include <mach/pxa2xx-regs.h>
19
20#define MDREFR_KDIV	0x200a4000	// all banks
21#define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
22
23		.text
24
25#ifdef CONFIG_PXA3xx
26/*
27 * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
28 */
29ENTRY(pxa3xx_finish_suspend)
30	mov	r0, #0x06		@ S2D3C4 mode
31	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
32
3320:	b	20b			@ waiting for sleep
34#endif /* CONFIG_PXA3xx */
35
36#ifdef CONFIG_PXA27x
37/*
38 * pxa27x_finish_suspend()
39 *
40 * Forces CPU into sleep state.
41 *
42 * r0 = value for PWRMODE M field for desired sleep state
43 */
44ENTRY(pxa27x_finish_suspend)
45	@ Put the processor to sleep
46	@ (also workaround for sighting 28071)
47
48	@ prepare value for sleep mode
49	mov	r1, r0				@ sleep mode
50
51	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
52	mov	r2, #UNCACHED_PHYS_0
53
54	@ prepare SDRAM refresh settings
55	ldr	r4, =MDREFR
56	ldr	r5, [r4]
57
58	@ enable SDRAM self-refresh mode
59	orr	r5, r5, #MDREFR_SLFRSH
60
61	@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
62	ldr	r6, =MDREFR_KDIV
63	orr	r5, r5, r6
64
65	@ Intel PXA270 Specification Update notes problems sleeping
66	@ with core operating above 91 MHz
67	@ (see Errata 50, ...processor does not exit from sleep...)
68
69	ldr	r6, =CCCR
70	ldr	r8, [r6]		@ keep original value for resume
71
72	ldr	r7, =CCCR_SLEEP		@ prepare CCCR sleep value
73	mov	r0, #0x2		@ prepare value for CLKCFG
74
75	@ align execution to a cache line
76	b	pxa_cpu_do_suspend
77#endif
78
79#ifdef CONFIG_PXA25x
80/*
81 * pxa25x_finish_suspend()
82 *
83 * Forces CPU into sleep state.
84 *
85 * r0 = value for PWRMODE M field for desired sleep state
86 */
87
88ENTRY(pxa25x_finish_suspend)
89	@ prepare value for sleep mode
90	mov	r1, r0				@ sleep mode
91
92	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
93	mov	r2, #UNCACHED_PHYS_0
94
95	@ prepare SDRAM refresh settings
96	ldr	r4, =MDREFR
97	ldr	r5, [r4]
98
99	@ enable SDRAM self-refresh mode
100	orr	r5, r5, #MDREFR_SLFRSH
101
102	@ Intel PXA255 Specification Update notes problems
103	@ about suspending with PXBus operating above 133MHz
104	@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
105	@
106	@ We keep the change-down close to the actual suspend on SDRAM
107	@ as possible to eliminate messing about with the refresh clock
108	@ as the system will restore with the original speed settings
109	@
110	@ Ben Dooks, 13-Sep-2004
111
112	ldr	r6, =CCCR
113	ldr	r8, [r6]		@ keep original value for resume
114
115	@ ensure x1 for run and turbo mode with memory clock
116	bic	r7, r8, #CCCR_M_MASK | CCCR_N_MASK
117	orr	r7, r7, #(1<<5) | (2<<7)
118
119	@ check that the memory frequency is within limits
120	and	r14, r7, #CCCR_L_MASK
121	teq	r14, #1
122	bicne	r7, r7, #CCCR_L_MASK
123	orrne	r7, r7, #1			@@ 99.53MHz
124
125	@ get ready for the change
126
127	@ note, turbo is not preserved over sleep so there is no
128	@ point in preserving it here. we save it on the stack with the
129	@ other CP registers instead.
130	mov	r0, #0
131	mcr	p14, 0, r0, c6, c0, 0
132	orr	r0, r0, #2			@ initiate change bit
133	b	pxa_cpu_do_suspend
134#endif
135
136	.ltorg
137	.align	5
138pxa_cpu_do_suspend:
139
140	@ All needed values are now in registers.
141	@ These last instructions should be in cache
142
143	@ initiate the frequency change...
144	str	r7, [r6]
145	mcr	p14, 0, r0, c6, c0, 0
146
147	@ restore the original cpu speed value for resume
148	str	r8, [r6]
149
150	@ need 6 13-MHz cycles before changing PWRMODE
151	@ just set frequency to 91-MHz... 6*91/13 = 42
152
153	mov	r0, #42
15410:	subs	r0, r0, #1
155	bne	10b
156
157	@ Do not reorder...
158	@ Intel PXA270 Specification Update notes problems performing
159	@ external accesses after SDRAM is put in self-refresh mode
160	@ (see Errata 39 ...hangs when entering self-refresh mode)
161
162	@ force address lines low by reading at physical address 0
163	ldr	r3, [r2]
164
165	@ put SDRAM into self-refresh
166	str	r5, [r4]
167
168	@ enter sleep mode
169	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
170
17120:	b	20b				@ loop waiting for sleep
172