1 /*
2 * linux/arch/m68k/atari/config.c
3 *
4 * Copyright (C) 1994 Bjoern Brauel
5 *
6 * 5/2/94 Roman Hodek:
7 * Added setting of time_adj to get a better clock.
8 *
9 * 5/14/94 Roman Hodek:
10 * gettod() for TT
11 *
12 * 5/15/94 Roman Hodek:
13 * hard_reset_now() for Atari (and others?)
14 *
15 * 94/12/30 Andreas Schwab:
16 * atari_sched_init fixed to get precise clock.
17 *
18 * This file is subject to the terms and conditions of the GNU General Public
19 * License. See the file COPYING in the main directory of this archive
20 * for more details.
21 */
22
23 /*
24 * Miscellaneous atari stuff
25 */
26
27 #include <linux/types.h>
28 #include <linux/mm.h>
29 #include <linux/seq_file.h>
30 #include <linux/console.h>
31 #include <linux/init.h>
32 #include <linux/delay.h>
33 #include <linux/ioport.h>
34 #include <linux/platform_device.h>
35 #include <linux/usb/isp116x.h>
36 #include <linux/vt_kern.h>
37 #include <linux/module.h>
38
39 #include <asm/bootinfo.h>
40 #include <asm/setup.h>
41 #include <asm/atarihw.h>
42 #include <asm/atariints.h>
43 #include <asm/atari_stram.h>
44 #include <asm/machdep.h>
45 #include <asm/hwtest.h>
46 #include <asm/io.h>
47
48 u_long atari_mch_cookie;
49 EXPORT_SYMBOL(atari_mch_cookie);
50
51 u_long atari_mch_type;
52 EXPORT_SYMBOL(atari_mch_type);
53
54 struct atari_hw_present atari_hw_present;
55 EXPORT_SYMBOL(atari_hw_present);
56
57 u_long atari_switches;
58 EXPORT_SYMBOL(atari_switches);
59
60 int atari_dont_touch_floppy_select;
61 EXPORT_SYMBOL(atari_dont_touch_floppy_select);
62
63 int atari_rtc_year_offset;
64
65 /* local function prototypes */
66 static void atari_reset(void);
67 static void atari_get_model(char *model);
68 static void atari_get_hardware_list(struct seq_file *m);
69
70 /* atari specific irq functions */
71 extern void atari_init_IRQ (void);
72 extern void atari_mksound(unsigned int count, unsigned int ticks);
73 #ifdef CONFIG_HEARTBEAT
74 static void atari_heartbeat(int on);
75 #endif
76
77 /* atari specific timer functions (in time.c) */
78 extern void atari_sched_init(irq_handler_t);
79 extern u32 atari_gettimeoffset(void);
80 extern int atari_mste_hwclk (int, struct rtc_time *);
81 extern int atari_tt_hwclk (int, struct rtc_time *);
82 extern int atari_mste_set_clock_mmss (unsigned long);
83 extern int atari_tt_set_clock_mmss (unsigned long);
84
85
86 /* ++roman: This is a more elaborate test for an SCC chip, since the plain
87 * Medusa board generates DTACK at the SCC's standard addresses, but a SCC
88 * board in the Medusa is possible. Also, the addresses where the ST_ESCC
89 * resides generate DTACK without the chip, too.
90 * The method is to write values into the interrupt vector register, that
91 * should be readable without trouble (from channel A!).
92 */
93
scc_test(volatile char * ctla)94 static int __init scc_test(volatile char *ctla)
95 {
96 if (!hwreg_present(ctla))
97 return 0;
98 MFPDELAY();
99
100 *ctla = 2;
101 MFPDELAY();
102 *ctla = 0x40;
103 MFPDELAY();
104
105 *ctla = 2;
106 MFPDELAY();
107 if (*ctla != 0x40)
108 return 0;
109 MFPDELAY();
110
111 *ctla = 2;
112 MFPDELAY();
113 *ctla = 0x60;
114 MFPDELAY();
115
116 *ctla = 2;
117 MFPDELAY();
118 if (*ctla != 0x60)
119 return 0;
120
121 return 1;
122 }
123
124
125 /*
126 * Parse an Atari-specific record in the bootinfo
127 */
128
atari_parse_bootinfo(const struct bi_record * record)129 int __init atari_parse_bootinfo(const struct bi_record *record)
130 {
131 int unknown = 0;
132 const u_long *data = record->data;
133
134 switch (record->tag) {
135 case BI_ATARI_MCH_COOKIE:
136 atari_mch_cookie = *data;
137 break;
138 case BI_ATARI_MCH_TYPE:
139 atari_mch_type = *data;
140 break;
141 default:
142 unknown = 1;
143 break;
144 }
145 return unknown;
146 }
147
148
149 /* Parse the Atari-specific switches= option. */
atari_switches_setup(char * str)150 static int __init atari_switches_setup(char *str)
151 {
152 char switches[strlen(str) + 1];
153 char *p;
154 int ovsc_shift;
155 char *args = switches;
156
157 if (!MACH_IS_ATARI)
158 return 0;
159
160 /* copy string to local array, strsep works destructively... */
161 strcpy(switches, str);
162 atari_switches = 0;
163
164 /* parse the options */
165 while ((p = strsep(&args, ",")) != NULL) {
166 if (!*p)
167 continue;
168 ovsc_shift = 0;
169 if (strncmp(p, "ov_", 3) == 0) {
170 p += 3;
171 ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
172 }
173
174 if (strcmp(p, "ikbd") == 0) {
175 /* RTS line of IKBD ACIA */
176 atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
177 } else if (strcmp(p, "midi") == 0) {
178 /* RTS line of MIDI ACIA */
179 atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
180 } else if (strcmp(p, "snd6") == 0) {
181 atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
182 } else if (strcmp(p, "snd7") == 0) {
183 atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
184 }
185 }
186 return 0;
187 }
188
189 early_param("switches", atari_switches_setup);
190
191
192 /*
193 * Setup the Atari configuration info
194 */
195
config_atari(void)196 void __init config_atari(void)
197 {
198 unsigned short tos_version;
199
200 memset(&atari_hw_present, 0, sizeof(atari_hw_present));
201
202 /* Change size of I/O space from 64KB to 4GB. */
203 ioport_resource.end = 0xFFFFFFFF;
204
205 mach_sched_init = atari_sched_init;
206 mach_init_IRQ = atari_init_IRQ;
207 mach_get_model = atari_get_model;
208 mach_get_hardware_list = atari_get_hardware_list;
209 arch_gettimeoffset = atari_gettimeoffset;
210 mach_reset = atari_reset;
211 mach_max_dma_address = 0xffffff;
212 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
213 mach_beep = atari_mksound;
214 #endif
215 #ifdef CONFIG_HEARTBEAT
216 mach_heartbeat = atari_heartbeat;
217 #endif
218
219 /* Set switches as requested by the user */
220 if (atari_switches & ATARI_SWITCH_IKBD)
221 acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
222 if (atari_switches & ATARI_SWITCH_MIDI)
223 acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
224 if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
225 sound_ym.rd_data_reg_sel = 14;
226 sound_ym.wd_data = sound_ym.rd_data_reg_sel |
227 ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
228 ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
229 }
230
231 /* ++bjoern:
232 * Determine hardware present
233 */
234
235 printk("Atari hardware found: ");
236 if (MACH_IS_MEDUSA) {
237 /* There's no Atari video hardware on the Medusa, but all the
238 * addresses below generate a DTACK so no bus error occurs! */
239 } else if (hwreg_present(f030_xreg)) {
240 ATARIHW_SET(VIDEL_SHIFTER);
241 printk("VIDEL ");
242 /* This is a temporary hack: If there is Falcon video
243 * hardware, we assume that the ST-DMA serves SCSI instead of
244 * ACSI. In the future, there should be a better method for
245 * this...
246 */
247 ATARIHW_SET(ST_SCSI);
248 printk("STDMA-SCSI ");
249 } else if (hwreg_present(tt_palette)) {
250 ATARIHW_SET(TT_SHIFTER);
251 printk("TT_SHIFTER ");
252 } else if (hwreg_present(&shifter.bas_hi)) {
253 if (hwreg_present(&shifter.bas_lo) &&
254 (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
255 ATARIHW_SET(EXTD_SHIFTER);
256 printk("EXTD_SHIFTER ");
257 } else {
258 ATARIHW_SET(STND_SHIFTER);
259 printk("STND_SHIFTER ");
260 }
261 }
262 if (hwreg_present(&st_mfp.par_dt_reg)) {
263 ATARIHW_SET(ST_MFP);
264 printk("ST_MFP ");
265 }
266 if (hwreg_present(&tt_mfp.par_dt_reg)) {
267 ATARIHW_SET(TT_MFP);
268 printk("TT_MFP ");
269 }
270 if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
271 ATARIHW_SET(SCSI_DMA);
272 printk("TT_SCSI_DMA ");
273 }
274 /*
275 * The ST-DMA address registers aren't readable
276 * on all Medusas, so the test below may fail
277 */
278 if (MACH_IS_MEDUSA ||
279 (hwreg_present(&st_dma.dma_vhi) &&
280 (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
281 st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
282 (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
283 st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
284 ATARIHW_SET(EXTD_DMA);
285 printk("EXTD_DMA ");
286 }
287 if (hwreg_present(&tt_scsi.scsi_data)) {
288 ATARIHW_SET(TT_SCSI);
289 printk("TT_SCSI ");
290 }
291 if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
292 ATARIHW_SET(YM_2149);
293 printk("YM2149 ");
294 }
295 if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
296 ATARIHW_SET(PCM_8BIT);
297 printk("PCM ");
298 }
299 if (hwreg_present(&falcon_codec.unused5)) {
300 ATARIHW_SET(CODEC);
301 printk("CODEC ");
302 }
303 if (hwreg_present(&dsp56k_host_interface.icr)) {
304 ATARIHW_SET(DSP56K);
305 printk("DSP56K ");
306 }
307 if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
308 #if 0
309 /* This test sucks! Who knows some better? */
310 (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
311 (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
312 #else
313 !MACH_IS_MEDUSA
314 #endif
315 ) {
316 ATARIHW_SET(SCC_DMA);
317 printk("SCC_DMA ");
318 }
319 if (scc_test(&atari_scc.cha_a_ctrl)) {
320 ATARIHW_SET(SCC);
321 printk("SCC ");
322 }
323 if (scc_test(&st_escc.cha_b_ctrl)) {
324 ATARIHW_SET(ST_ESCC);
325 printk("ST_ESCC ");
326 }
327 if (hwreg_present(&tt_scu.sys_mask)) {
328 ATARIHW_SET(SCU);
329 /* Assume a VME bus if there's a SCU */
330 ATARIHW_SET(VME);
331 printk("VME SCU ");
332 }
333 if (hwreg_present((void *)(0xffff9210))) {
334 ATARIHW_SET(ANALOG_JOY);
335 printk("ANALOG_JOY ");
336 }
337 if (hwreg_present(blitter.halftone)) {
338 ATARIHW_SET(BLITTER);
339 printk("BLITTER ");
340 }
341 if (hwreg_present((void *)0xfff00039)) {
342 ATARIHW_SET(IDE);
343 printk("IDE ");
344 }
345 #if 1 /* This maybe wrong */
346 if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
347 hwreg_present(&tt_microwire.mask) &&
348 (tt_microwire.mask = 0x7ff,
349 udelay(1),
350 tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
351 udelay(1),
352 tt_microwire.data != 0)) {
353 ATARIHW_SET(MICROWIRE);
354 while (tt_microwire.mask != 0x7ff)
355 ;
356 printk("MICROWIRE ");
357 }
358 #endif
359 if (hwreg_present(&tt_rtc.regsel)) {
360 ATARIHW_SET(TT_CLK);
361 printk("TT_CLK ");
362 mach_hwclk = atari_tt_hwclk;
363 mach_set_clock_mmss = atari_tt_set_clock_mmss;
364 }
365 if (hwreg_present(&mste_rtc.sec_ones)) {
366 ATARIHW_SET(MSTE_CLK);
367 printk("MSTE_CLK ");
368 mach_hwclk = atari_mste_hwclk;
369 mach_set_clock_mmss = atari_mste_set_clock_mmss;
370 }
371 if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
372 hwreg_write(&dma_wd.fdc_speed, 0)) {
373 ATARIHW_SET(FDCSPEED);
374 printk("FDC_SPEED ");
375 }
376 if (!ATARIHW_PRESENT(ST_SCSI)) {
377 ATARIHW_SET(ACSI);
378 printk("ACSI ");
379 }
380 printk("\n");
381
382 if (CPU_IS_040_OR_060)
383 /* Now it seems to be safe to turn of the tt0 transparent
384 * translation (the one that must not be turned off in
385 * head.S...)
386 */
387 asm volatile ("\n"
388 " moveq #0,%%d0\n"
389 " .chip 68040\n"
390 " movec %%d0,%%itt0\n"
391 " movec %%d0,%%dtt0\n"
392 " .chip 68k"
393 : /* no outputs */
394 : /* no inputs */
395 : "d0");
396
397 /* allocator for memory that must reside in st-ram */
398 atari_stram_init();
399
400 /* Set up a mapping for the VMEbus address region:
401 *
402 * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
403 * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
404 * 0xfe000000 virt., because this can be done with a single
405 * transparent translation. On the 68040, lots of often unused
406 * page tables would be needed otherwise. On a MegaSTE or similar,
407 * the highest byte is stripped off by hardware due to the 24 bit
408 * design of the bus.
409 */
410
411 if (CPU_IS_020_OR_030) {
412 unsigned long tt1_val;
413 tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache
414 * inhibit, read and write, FDC mask = 3,
415 * FDC val = 4 -> Supervisor only */
416 asm volatile ("\n"
417 " .chip 68030\n"
418 " pmove %0,%/tt1\n"
419 " .chip 68k"
420 : : "m" (tt1_val));
421 } else {
422 asm volatile ("\n"
423 " .chip 68040\n"
424 " movec %0,%%itt1\n"
425 " movec %0,%%dtt1\n"
426 " .chip 68k"
427 :
428 : "d" (0xfe00a040)); /* Translate 0xfexxxxxx, enable,
429 * supervisor only, non-cacheable/
430 * serialized, writable */
431
432 }
433
434 /* Fetch tos version at Physical 2 */
435 /*
436 * We my not be able to access this address if the kernel is
437 * loaded to st ram, since the first page is unmapped. On the
438 * Medusa this is always the case and there is nothing we can do
439 * about this, so we just assume the smaller offset. For the TT
440 * we use the fact that in head.S we have set up a mapping
441 * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
442 * in the last 16MB of the address space.
443 */
444 tos_version = (MACH_IS_MEDUSA) ?
445 0xfff : *(unsigned short *)0xff000002;
446 atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
447 }
448
449 #ifdef CONFIG_HEARTBEAT
atari_heartbeat(int on)450 static void atari_heartbeat(int on)
451 {
452 unsigned char tmp;
453 unsigned long flags;
454
455 if (atari_dont_touch_floppy_select)
456 return;
457
458 local_irq_save(flags);
459 sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
460 tmp = sound_ym.rd_data_reg_sel;
461 sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
462 local_irq_restore(flags);
463 }
464 #endif
465
466 /* ++roman:
467 *
468 * This function does a reset on machines that lack the ability to
469 * assert the processor's _RESET signal somehow via hardware. It is
470 * based on the fact that you can find the initial SP and PC values
471 * after a reset at physical addresses 0 and 4. This works pretty well
472 * for Atari machines, since the lowest 8 bytes of physical memory are
473 * really ROM (mapped by hardware). For other 680x0 machines: don't
474 * know if it works...
475 *
476 * To get the values at addresses 0 and 4, the MMU better is turned
477 * off first. After that, we have to jump into physical address space
478 * (the PC before the pmove statement points to the virtual address of
479 * the code). Getting that physical address is not hard, but the code
480 * becomes a bit complex since I've tried to ensure that the jump
481 * statement after the pmove is in the cache already (otherwise the
482 * processor can't fetch it!). For that, the code first jumps to the
483 * jump statement with the (virtual) address of the pmove section in
484 * an address register . The jump statement is surely in the cache
485 * now. After that, that physical address of the reset code is loaded
486 * into the same address register, pmove is done and the same jump
487 * statements goes to the reset code. Since there are not many
488 * statements between the two jumps, I hope it stays in the cache.
489 *
490 * The C code makes heavy use of the GCC features that you can get the
491 * address of a C label. No hope to compile this with another compiler
492 * than GCC!
493 */
494
495 /* ++andreas: no need for complicated code, just depend on prefetch */
496
atari_reset(void)497 static void atari_reset(void)
498 {
499 long tc_val = 0;
500 long reset_addr;
501
502 /*
503 * On the Medusa, phys. 0x4 may contain garbage because it's no
504 * ROM. See above for explanation why we cannot use PTOV(4).
505 */
506 reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
507 *(unsigned long *) 0xff000004;
508
509 /* reset ACIA for switch off OverScan, if it's active */
510 if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
511 acia.key_ctrl = ACIA_RESET;
512 if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
513 acia.mid_ctrl = ACIA_RESET;
514
515 /* processor independent: turn off interrupts and reset the VBR;
516 * the caches must be left enabled, else prefetching the final jump
517 * instruction doesn't work.
518 */
519 local_irq_disable();
520 asm volatile ("movec %0,%%vbr"
521 : : "d" (0));
522
523 if (CPU_IS_040_OR_060) {
524 unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
525 if (CPU_IS_060) {
526 /* 68060: clear PCR to turn off superscalar operation */
527 asm volatile ("\n"
528 " .chip 68060\n"
529 " movec %0,%%pcr\n"
530 " .chip 68k"
531 : : "d" (0));
532 }
533
534 asm volatile ("\n"
535 " move.l %0,%%d0\n"
536 " and.l #0xff000000,%%d0\n"
537 " or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */
538 " .chip 68040\n"
539 " movec %%d0,%%itt0\n"
540 " movec %%d0,%%dtt0\n"
541 " .chip 68k\n"
542 " jmp %0@"
543 : : "a" (jmp_addr040)
544 : "d0");
545 jmp_addr_label040:
546 asm volatile ("\n"
547 " moveq #0,%%d0\n"
548 " nop\n"
549 " .chip 68040\n"
550 " cinva %%bc\n"
551 " nop\n"
552 " pflusha\n"
553 " nop\n"
554 " movec %%d0,%%tc\n"
555 " nop\n"
556 /* the following setup of transparent translations is needed on the
557 * Afterburner040 to successfully reboot. Other machines shouldn't
558 * care about a different tt regs setup, they also didn't care in
559 * the past that the regs weren't turned off. */
560 " move.l #0xffc000,%%d0\n" /* whole insn space cacheable */
561 " movec %%d0,%%itt0\n"
562 " movec %%d0,%%itt1\n"
563 " or.w #0x40,%/d0\n" /* whole data space non-cacheable/ser. */
564 " movec %%d0,%%dtt0\n"
565 " movec %%d0,%%dtt1\n"
566 " .chip 68k\n"
567 " jmp %0@"
568 : /* no outputs */
569 : "a" (reset_addr)
570 : "d0");
571 } else
572 asm volatile ("\n"
573 " pmove %0,%%tc\n"
574 " jmp %1@"
575 : /* no outputs */
576 : "m" (tc_val), "a" (reset_addr));
577 }
578
579
atari_get_model(char * model)580 static void atari_get_model(char *model)
581 {
582 strcpy(model, "Atari ");
583 switch (atari_mch_cookie >> 16) {
584 case ATARI_MCH_ST:
585 if (ATARIHW_PRESENT(MSTE_CLK))
586 strcat(model, "Mega ST");
587 else
588 strcat(model, "ST");
589 break;
590 case ATARI_MCH_STE:
591 if (MACH_IS_MSTE)
592 strcat(model, "Mega STE");
593 else
594 strcat(model, "STE");
595 break;
596 case ATARI_MCH_TT:
597 if (MACH_IS_MEDUSA)
598 /* Medusa has TT _MCH cookie */
599 strcat(model, "Medusa");
600 else
601 strcat(model, "TT");
602 break;
603 case ATARI_MCH_FALCON:
604 strcat(model, "Falcon");
605 if (MACH_IS_AB40)
606 strcat(model, " (with Afterburner040)");
607 break;
608 default:
609 sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
610 atari_mch_cookie);
611 break;
612 }
613 }
614
615
atari_get_hardware_list(struct seq_file * m)616 static void atari_get_hardware_list(struct seq_file *m)
617 {
618 int i;
619
620 for (i = 0; i < m68k_num_memory; i++)
621 seq_printf(m, "\t%3ld MB at 0x%08lx (%s)\n",
622 m68k_memory[i].size >> 20, m68k_memory[i].addr,
623 (m68k_memory[i].addr & 0xff000000 ?
624 "alternate RAM" : "ST-RAM"));
625
626 #define ATARIHW_ANNOUNCE(name, str) \
627 if (ATARIHW_PRESENT(name)) \
628 seq_printf(m, "\t%s\n", str)
629
630 seq_printf(m, "Detected hardware:\n");
631 ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
632 ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
633 ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
634 ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
635 ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
636 ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
637 ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
638 ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
639 ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
640 ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
641 ATARIHW_ANNOUNCE(IDE, "IDE Interface");
642 ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
643 ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
644 ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
645 ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
646 ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
647 ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
648 ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
649 ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
650 ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
651 ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
652 ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
653 ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
654 ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
655 ATARIHW_ANNOUNCE(SCU, "System Control Unit");
656 ATARIHW_ANNOUNCE(BLITTER, "Blitter");
657 ATARIHW_ANNOUNCE(VME, "VME Bus");
658 ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
659 }
660
661 /*
662 * MSch: initial platform device support for Atari,
663 * required for EtherNAT/EtherNEC/NetUSBee drivers
664 */
665
666 #if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC)
isp1160_delay(struct device * dev,int delay)667 static void isp1160_delay(struct device *dev, int delay)
668 {
669 ndelay(delay);
670 }
671 #endif
672
673 #ifdef CONFIG_ATARI_ETHERNAT
674 /*
675 * EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver
676 */
677
678 #define ATARI_ETHERNAT_IRQ 140
679
680 static struct resource smc91x_resources[] = {
681 [0] = {
682 .name = "smc91x-regs",
683 .start = ATARI_ETHERNAT_PHYS_ADDR,
684 .end = ATARI_ETHERNAT_PHYS_ADDR + 0xfffff,
685 .flags = IORESOURCE_MEM,
686 },
687 [1] = {
688 .name = "smc91x-irq",
689 .start = ATARI_ETHERNAT_IRQ,
690 .end = ATARI_ETHERNAT_IRQ,
691 .flags = IORESOURCE_IRQ,
692 },
693 };
694
695 static struct platform_device smc91x_device = {
696 .name = "smc91x",
697 .id = -1,
698 .num_resources = ARRAY_SIZE(smc91x_resources),
699 .resource = smc91x_resources,
700 };
701
702 /*
703 * ISP 1160 - using the isp116x-hcd module
704 */
705
706 #define ATARI_USB_PHYS_ADDR 0x80000012
707 #define ATARI_USB_IRQ 139
708
709 static struct resource isp1160_resources[] = {
710 [0] = {
711 .name = "isp1160-data",
712 .start = ATARI_USB_PHYS_ADDR,
713 .end = ATARI_USB_PHYS_ADDR + 0x1,
714 .flags = IORESOURCE_MEM,
715 },
716 [1] = {
717 .name = "isp1160-regs",
718 .start = ATARI_USB_PHYS_ADDR + 0x4,
719 .end = ATARI_USB_PHYS_ADDR + 0x5,
720 .flags = IORESOURCE_MEM,
721 },
722 [2] = {
723 .name = "isp1160-irq",
724 .start = ATARI_USB_IRQ,
725 .end = ATARI_USB_IRQ,
726 .flags = IORESOURCE_IRQ,
727 },
728 };
729
730 /* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
731 static struct isp116x_platform_data isp1160_platform_data = {
732 /* Enable internal resistors on downstream ports */
733 .sel15Kres = 1,
734 /* On-chip overcurrent protection */
735 .oc_enable = 1,
736 /* INT output polarity */
737 .int_act_high = 1,
738 /* INT edge or level triggered */
739 .int_edge_triggered = 0,
740
741 /* WAKEUP pin connected - NOT SUPPORTED */
742 /* .remote_wakeup_connected = 0, */
743 /* Wakeup by devices on usb bus enabled */
744 .remote_wakeup_enable = 0,
745 .delay = isp1160_delay,
746 };
747
748 static struct platform_device isp1160_device = {
749 .name = "isp116x-hcd",
750 .id = 0,
751 .num_resources = ARRAY_SIZE(isp1160_resources),
752 .resource = isp1160_resources,
753 .dev = {
754 .platform_data = &isp1160_platform_data,
755 },
756 };
757
758 static struct platform_device *atari_ethernat_devices[] __initdata = {
759 &smc91x_device,
760 &isp1160_device
761 };
762 #endif /* CONFIG_ATARI_ETHERNAT */
763
764 #ifdef CONFIG_ATARI_ETHERNEC
765 /*
766 * EtherNEC: RTL8019 (NE2000 compatible) Ethernet chipset,
767 * handled by ne.c driver
768 */
769
770 #define ATARI_ETHERNEC_PHYS_ADDR 0xfffa0000
771 #define ATARI_ETHERNEC_BASE 0x300
772 #define ATARI_ETHERNEC_IRQ IRQ_MFP_TIMER1
773
774 static struct resource rtl8019_resources[] = {
775 [0] = {
776 .name = "rtl8019-regs",
777 .start = ATARI_ETHERNEC_BASE,
778 .end = ATARI_ETHERNEC_BASE + 0x20 - 1,
779 .flags = IORESOURCE_IO,
780 },
781 [1] = {
782 .name = "rtl8019-irq",
783 .start = ATARI_ETHERNEC_IRQ,
784 .end = ATARI_ETHERNEC_IRQ,
785 .flags = IORESOURCE_IRQ,
786 },
787 };
788
789 static struct platform_device rtl8019_device = {
790 .name = "ne",
791 .id = -1,
792 .num_resources = ARRAY_SIZE(rtl8019_resources),
793 .resource = rtl8019_resources,
794 };
795
796 /*
797 * NetUSBee: ISP1160 USB host adapter via ROM-port adapter
798 */
799
800 #define ATARI_NETUSBEE_PHYS_ADDR 0xfffa8000
801 #define ATARI_NETUSBEE_BASE 0x340
802 #define ATARI_NETUSBEE_IRQ IRQ_MFP_TIMER2
803
804 static struct resource netusbee_resources[] = {
805 [0] = {
806 .name = "isp1160-data",
807 .start = ATARI_NETUSBEE_BASE,
808 .end = ATARI_NETUSBEE_BASE + 0x1,
809 .flags = IORESOURCE_MEM,
810 },
811 [1] = {
812 .name = "isp1160-regs",
813 .start = ATARI_NETUSBEE_BASE + 0x20,
814 .end = ATARI_NETUSBEE_BASE + 0x21,
815 .flags = IORESOURCE_MEM,
816 },
817 [2] = {
818 .name = "isp1160-irq",
819 .start = ATARI_NETUSBEE_IRQ,
820 .end = ATARI_NETUSBEE_IRQ,
821 .flags = IORESOURCE_IRQ,
822 },
823 };
824
825 /* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
826 static struct isp116x_platform_data netusbee_platform_data = {
827 /* Enable internal resistors on downstream ports */
828 .sel15Kres = 1,
829 /* On-chip overcurrent protection */
830 .oc_enable = 1,
831 /* INT output polarity */
832 .int_act_high = 1,
833 /* INT edge or level triggered */
834 .int_edge_triggered = 0,
835
836 /* WAKEUP pin connected - NOT SUPPORTED */
837 /* .remote_wakeup_connected = 0, */
838 /* Wakeup by devices on usb bus enabled */
839 .remote_wakeup_enable = 0,
840 .delay = isp1160_delay,
841 };
842
843 static struct platform_device netusbee_device = {
844 .name = "isp116x-hcd",
845 .id = 1,
846 .num_resources = ARRAY_SIZE(netusbee_resources),
847 .resource = netusbee_resources,
848 .dev = {
849 .platform_data = &netusbee_platform_data,
850 },
851 };
852
853 static struct platform_device *atari_netusbee_devices[] __initdata = {
854 &rtl8019_device,
855 &netusbee_device
856 };
857 #endif /* CONFIG_ATARI_ETHERNEC */
858
atari_platform_init(void)859 int __init atari_platform_init(void)
860 {
861 int rv = 0;
862
863 if (!MACH_IS_ATARI)
864 return -ENODEV;
865
866 #ifdef CONFIG_ATARI_ETHERNAT
867 {
868 unsigned char *enatc_virt;
869 enatc_virt = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0xf);
870 if (hwreg_present(enatc_virt)) {
871 rv = platform_add_devices(atari_ethernat_devices,
872 ARRAY_SIZE(atari_ethernat_devices));
873 }
874 iounmap(enatc_virt);
875 }
876 #endif
877
878 #ifdef CONFIG_ATARI_ETHERNEC
879 {
880 int error;
881 unsigned char *enec_virt;
882 enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf);
883 if (hwreg_present(enec_virt)) {
884 error = platform_add_devices(atari_netusbee_devices,
885 ARRAY_SIZE(atari_netusbee_devices));
886 if (error && !rv)
887 rv = error;
888 }
889 iounmap(enec_virt);
890 }
891 #endif
892
893 return rv;
894 }
895
896 arch_initcall(atari_platform_init);
897