• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Board setup routines for the GEFanuc C2K board
3  *
4  * Author: Remi Machet <rmachet@slac.stanford.edu>
5  *
6  * Originated from prpmc2800.c
7  *
8  * 2008 (c) Stanford University
9  * 2007 (c) MontaVista, Software, Inc.
10  *
11  * This program is free software; you can redistribute it and/or modify it
12  * under the terms of the GNU General Public License version 2 as published
13  * by the Free Software Foundation.
14  */
15 
16 #include <linux/stddef.h>
17 #include <linux/kernel.h>
18 #include <linux/delay.h>
19 #include <linux/interrupt.h>
20 #include <linux/seq_file.h>
21 #include <linux/time.h>
22 #include <linux/of.h>
23 
24 #include <asm/machdep.h>
25 #include <asm/prom.h>
26 #include <asm/time.h>
27 
28 #include <mm/mmu_decl.h>
29 
30 #include <sysdev/mv64x60.h>
31 
32 #define MV64x60_MPP_CNTL_0	0x0000
33 #define MV64x60_MPP_CNTL_2	0x0008
34 
35 #define MV64x60_GPP_IO_CNTL	0x0000
36 #define MV64x60_GPP_LEVEL_CNTL	0x0010
37 #define MV64x60_GPP_VALUE_SET	0x0018
38 
39 static void __iomem *mv64x60_mpp_reg_base;
40 static void __iomem *mv64x60_gpp_reg_base;
41 
c2k_setup_arch(void)42 static void __init c2k_setup_arch(void)
43 {
44 	struct device_node *np;
45 	phys_addr_t paddr;
46 	const unsigned int *reg;
47 
48 	/*
49 	 * ioremap mpp and gpp registers in case they are later
50 	 * needed by c2k_reset_board().
51 	 */
52 	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
53 	reg = of_get_property(np, "reg", NULL);
54 	paddr = of_translate_address(np, reg);
55 	of_node_put(np);
56 	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
57 
58 	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
59 	reg = of_get_property(np, "reg", NULL);
60 	paddr = of_translate_address(np, reg);
61 	of_node_put(np);
62 	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
63 
64 #ifdef CONFIG_PCI
65 	mv64x60_pci_init();
66 #endif
67 }
68 
c2k_reset_board(void)69 static void c2k_reset_board(void)
70 {
71 	u32 temp;
72 
73 	local_irq_disable();
74 
75 	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
76 	temp &= 0xFFFF0FFF;
77 	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
78 
79 	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
80 	temp |= 0x00000004;
81 	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
82 
83 	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
84 	temp |= 0x00000004;
85 	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
86 
87 	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
88 	temp &= 0xFFFF0FFF;
89 	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
90 
91 	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
92 	temp |= 0x00080000;
93 	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
94 
95 	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
96 	temp |= 0x00080000;
97 	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
98 
99 	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
100 }
101 
c2k_restart(char * cmd)102 static void c2k_restart(char *cmd)
103 {
104 	c2k_reset_board();
105 	msleep(100);
106 	panic("restart failed\n");
107 }
108 
109 #ifdef CONFIG_NOT_COHERENT_CACHE
110 #define COHERENCY_SETTING "off"
111 #else
112 #define COHERENCY_SETTING "on"
113 #endif
114 
c2k_show_cpuinfo(struct seq_file * m)115 void c2k_show_cpuinfo(struct seq_file *m)
116 {
117 	seq_printf(m, "Vendor\t\t: GEFanuc\n");
118 	seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
119 }
120 
121 /*
122  * Called very early, device-tree isn't unflattened
123  */
c2k_probe(void)124 static int __init c2k_probe(void)
125 {
126 	unsigned long root = of_get_flat_dt_root();
127 
128 	if (!of_flat_dt_is_compatible(root, "GEFanuc,C2K"))
129 		return 0;
130 
131 	printk(KERN_INFO "Detected a GEFanuc C2K board\n");
132 
133 	_set_L2CR(0);
134 	_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
135 	return 1;
136 }
137 
define_machine(c2k)138 define_machine(c2k) {
139 	.name			= "C2K",
140 	.probe			= c2k_probe,
141 	.setup_arch		= c2k_setup_arch,
142 	.init_early		= mv64x60_init_early,
143 	.show_cpuinfo		= c2k_show_cpuinfo,
144 	.init_IRQ		= mv64x60_init_irq,
145 	.get_irq		= mv64x60_get_irq,
146 	.restart		= c2k_restart,
147 	.calibrate_decr		= generic_calibrate_decr,
148 };
149