1 /*
2 * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
3 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
4 *
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the
9 * OpenIB.org BSD license below:
10 *
11 * Redistribution and use in source and binary forms, with or
12 * without modification, are permitted provided that the following
13 * conditions are met:
14 *
15 * - Redistributions of source code must retain the above
16 * copyright notice, this list of conditions and the following
17 * disclaimer.
18 *
19 * - Redistributions in binary form must reproduce the above
20 * copyright notice, this list of conditions and the following
21 * disclaimer in the documentation and/or other materials
22 * provided with the distribution.
23 *
24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31 * SOFTWARE.
32 */
33
34 #include <linux/pci.h>
35 #include <linux/netdevice.h>
36 #include <linux/moduleparam.h>
37 #include <linux/slab.h>
38 #include <linux/stat.h>
39 #include <linux/vmalloc.h>
40
41 #include "ipath_kernel.h"
42 #include "ipath_common.h"
43
44 /*
45 * min buffers we want to have per port, after driver
46 */
47 #define IPATH_MIN_USER_PORT_BUFCNT 7
48
49 /*
50 * Number of ports we are configured to use (to allow for more pio
51 * buffers per port, etc.) Zero means use chip value.
52 */
53 static ushort ipath_cfgports;
54
55 module_param_named(cfgports, ipath_cfgports, ushort, S_IRUGO);
56 MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
57
58 /*
59 * Number of buffers reserved for driver (verbs and layered drivers.)
60 * Initialized based on number of PIO buffers if not set via module interface.
61 * The problem with this is that it's global, but we'll use different
62 * numbers for different chip types.
63 */
64 static ushort ipath_kpiobufs;
65
66 static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
67
68 module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
69 &ipath_kpiobufs, S_IWUSR | S_IRUGO);
70 MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
71
72 /**
73 * create_port0_egr - allocate the eager TID buffers
74 * @dd: the infinipath device
75 *
76 * This code is now quite different for user and kernel, because
77 * the kernel uses skb's, for the accelerated network performance.
78 * This is the kernel (port0) version.
79 *
80 * Allocate the eager TID buffers and program them into infinipath.
81 * We use the network layer alloc_skb() allocator to allocate the
82 * memory, and either use the buffers as is for things like verbs
83 * packets, or pass the buffers up to the ipath layered driver and
84 * thence the network layer, replacing them as we do so (see
85 * ipath_rcv_layer()).
86 */
create_port0_egr(struct ipath_devdata * dd)87 static int create_port0_egr(struct ipath_devdata *dd)
88 {
89 unsigned e, egrcnt;
90 struct ipath_skbinfo *skbinfo;
91 int ret;
92
93 egrcnt = dd->ipath_p0_rcvegrcnt;
94
95 skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt);
96 if (skbinfo == NULL) {
97 ipath_dev_err(dd, "allocation error for eager TID "
98 "skb array\n");
99 ret = -ENOMEM;
100 goto bail;
101 }
102 for (e = 0; e < egrcnt; e++) {
103 /*
104 * This is a bit tricky in that we allocate extra
105 * space for 2 bytes of the 14 byte ethernet header.
106 * These two bytes are passed in the ipath header so
107 * the rest of the data is word aligned. We allocate
108 * 4 bytes so that the data buffer stays word aligned.
109 * See ipath_kreceive() for more details.
110 */
111 skbinfo[e].skb = ipath_alloc_skb(dd, GFP_KERNEL);
112 if (!skbinfo[e].skb) {
113 ipath_dev_err(dd, "SKB allocation error for "
114 "eager TID %u\n", e);
115 while (e != 0)
116 dev_kfree_skb(skbinfo[--e].skb);
117 vfree(skbinfo);
118 ret = -ENOMEM;
119 goto bail;
120 }
121 }
122 /*
123 * After loop above, so we can test non-NULL to see if ready
124 * to use at receive, etc.
125 */
126 dd->ipath_port0_skbinfo = skbinfo;
127
128 for (e = 0; e < egrcnt; e++) {
129 dd->ipath_port0_skbinfo[e].phys =
130 ipath_map_single(dd->pcidev,
131 dd->ipath_port0_skbinfo[e].skb->data,
132 dd->ipath_ibmaxlen, PCI_DMA_FROMDEVICE);
133 dd->ipath_f_put_tid(dd, e + (u64 __iomem *)
134 ((char __iomem *) dd->ipath_kregbase +
135 dd->ipath_rcvegrbase),
136 RCVHQ_RCV_TYPE_EAGER,
137 dd->ipath_port0_skbinfo[e].phys);
138 }
139
140 ret = 0;
141
142 bail:
143 return ret;
144 }
145
bringup_link(struct ipath_devdata * dd)146 static int bringup_link(struct ipath_devdata *dd)
147 {
148 u64 val, ibc;
149 int ret = 0;
150
151 /* hold IBC in reset */
152 dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
153 ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
154 dd->ipath_control);
155
156 /*
157 * set initial max size pkt IBC will send, including ICRC; it's the
158 * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
159 */
160 val = (dd->ipath_ibmaxlen >> 2) + 1;
161 ibc = val << dd->ibcc_mpl_shift;
162
163 /* flowcontrolwatermark is in units of KBytes */
164 ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
165 /*
166 * How often flowctrl sent. More or less in usecs; balance against
167 * watermark value, so that in theory senders always get a flow
168 * control update in time to not let the IB link go idle.
169 */
170 ibc |= 0x3ULL << INFINIPATH_IBCC_FLOWCTRLPERIOD_SHIFT;
171 /* max error tolerance */
172 ibc |= 0xfULL << INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT;
173 /* use "real" buffer space for */
174 ibc |= 4ULL << INFINIPATH_IBCC_CREDITSCALE_SHIFT;
175 /* IB credit flow control. */
176 ibc |= 0xfULL << INFINIPATH_IBCC_OVERRUNTHRESHOLD_SHIFT;
177 /* initially come up waiting for TS1, without sending anything. */
178 dd->ipath_ibcctrl = ibc;
179 /*
180 * Want to start out with both LINKCMD and LINKINITCMD in NOP
181 * (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that
182 * to stay a NOP. Flag that we are disabled, for the (unlikely)
183 * case that some recovery path is trying to bring the link up
184 * before we are ready.
185 */
186 ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
187 INFINIPATH_IBCC_LINKINITCMD_SHIFT;
188 dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
189 ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
190 (unsigned long long) ibc);
191 ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
192
193 // be sure chip saw it
194 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
195
196 ret = dd->ipath_f_bringup_serdes(dd);
197
198 if (ret)
199 dev_info(&dd->pcidev->dev, "Could not initialize SerDes, "
200 "not usable\n");
201 else {
202 /* enable IBC */
203 dd->ipath_control |= INFINIPATH_C_LINKENABLE;
204 ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
205 dd->ipath_control);
206 }
207
208 return ret;
209 }
210
create_portdata0(struct ipath_devdata * dd)211 static struct ipath_portdata *create_portdata0(struct ipath_devdata *dd)
212 {
213 struct ipath_portdata *pd = NULL;
214
215 pd = kzalloc(sizeof(*pd), GFP_KERNEL);
216 if (pd) {
217 pd->port_dd = dd;
218 pd->port_cnt = 1;
219 /* The port 0 pkey table is used by the layer interface. */
220 pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
221 pd->port_seq_cnt = 1;
222 }
223 return pd;
224 }
225
init_chip_first(struct ipath_devdata * dd)226 static int init_chip_first(struct ipath_devdata *dd)
227 {
228 struct ipath_portdata *pd;
229 int ret = 0;
230 u64 val;
231
232 spin_lock_init(&dd->ipath_kernel_tid_lock);
233 spin_lock_init(&dd->ipath_user_tid_lock);
234 spin_lock_init(&dd->ipath_sendctrl_lock);
235 spin_lock_init(&dd->ipath_uctxt_lock);
236 spin_lock_init(&dd->ipath_sdma_lock);
237 spin_lock_init(&dd->ipath_gpio_lock);
238 spin_lock_init(&dd->ipath_eep_st_lock);
239 spin_lock_init(&dd->ipath_sdepb_lock);
240 mutex_init(&dd->ipath_eep_lock);
241
242 /*
243 * skip cfgports stuff because we are not allocating memory,
244 * and we don't want problems if the portcnt changed due to
245 * cfgports. We do still check and report a difference, if
246 * not same (should be impossible).
247 */
248 dd->ipath_f_config_ports(dd, ipath_cfgports);
249 if (!ipath_cfgports)
250 dd->ipath_cfgports = dd->ipath_portcnt;
251 else if (ipath_cfgports <= dd->ipath_portcnt) {
252 dd->ipath_cfgports = ipath_cfgports;
253 ipath_dbg("Configured to use %u ports out of %u in chip\n",
254 dd->ipath_cfgports, ipath_read_kreg32(dd,
255 dd->ipath_kregs->kr_portcnt));
256 } else {
257 dd->ipath_cfgports = dd->ipath_portcnt;
258 ipath_dbg("Tried to configured to use %u ports; chip "
259 "only supports %u\n", ipath_cfgports,
260 ipath_read_kreg32(dd,
261 dd->ipath_kregs->kr_portcnt));
262 }
263 /*
264 * Allocate full portcnt array, rather than just cfgports, because
265 * cleanup iterates across all possible ports.
266 */
267 dd->ipath_pd = kzalloc(sizeof(*dd->ipath_pd) * dd->ipath_portcnt,
268 GFP_KERNEL);
269
270 if (!dd->ipath_pd) {
271 ipath_dev_err(dd, "Unable to allocate portdata array, "
272 "failing\n");
273 ret = -ENOMEM;
274 goto done;
275 }
276
277 pd = create_portdata0(dd);
278 if (!pd) {
279 ipath_dev_err(dd, "Unable to allocate portdata for port "
280 "0, failing\n");
281 ret = -ENOMEM;
282 goto done;
283 }
284 dd->ipath_pd[0] = pd;
285
286 dd->ipath_rcvtidcnt =
287 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
288 dd->ipath_rcvtidbase =
289 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
290 dd->ipath_rcvegrcnt =
291 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
292 dd->ipath_rcvegrbase =
293 ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
294 dd->ipath_palign =
295 ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
296 dd->ipath_piobufbase =
297 ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufbase);
298 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
299 dd->ipath_piosize2k = val & ~0U;
300 dd->ipath_piosize4k = val >> 32;
301 if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
302 ipath_mtu4096 = 0; /* 4KB not supported by this chip */
303 dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
304 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
305 dd->ipath_piobcnt2k = val & ~0U;
306 dd->ipath_piobcnt4k = val >> 32;
307 dd->ipath_pio2kbase =
308 (u32 __iomem *) (((char __iomem *) dd->ipath_kregbase) +
309 (dd->ipath_piobufbase & 0xffffffff));
310 if (dd->ipath_piobcnt4k) {
311 dd->ipath_pio4kbase = (u32 __iomem *)
312 (((char __iomem *) dd->ipath_kregbase) +
313 (dd->ipath_piobufbase >> 32));
314 /*
315 * 4K buffers take 2 pages; we use roundup just to be
316 * paranoid; we calculate it once here, rather than on
317 * ever buf allocate
318 */
319 dd->ipath_4kalign = ALIGN(dd->ipath_piosize4k,
320 dd->ipath_palign);
321 ipath_dbg("%u 2k(%x) piobufs @ %p, %u 4k(%x) @ %p "
322 "(%x aligned)\n",
323 dd->ipath_piobcnt2k, dd->ipath_piosize2k,
324 dd->ipath_pio2kbase, dd->ipath_piobcnt4k,
325 dd->ipath_piosize4k, dd->ipath_pio4kbase,
326 dd->ipath_4kalign);
327 }
328 else ipath_dbg("%u 2k piobufs @ %p\n",
329 dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
330
331 done:
332 return ret;
333 }
334
335 /**
336 * init_chip_reset - re-initialize after a reset, or enable
337 * @dd: the infinipath device
338 *
339 * sanity check at least some of the values after reset, and
340 * ensure no receive or transmit (explicitly, in case reset
341 * failed
342 */
init_chip_reset(struct ipath_devdata * dd)343 static int init_chip_reset(struct ipath_devdata *dd)
344 {
345 u32 rtmp;
346 int i;
347 unsigned long flags;
348
349 /*
350 * ensure chip does no sends or receives, tail updates, or
351 * pioavail updates while we re-initialize
352 */
353 dd->ipath_rcvctrl &= ~(1ULL << dd->ipath_r_tailupd_shift);
354 for (i = 0; i < dd->ipath_portcnt; i++) {
355 clear_bit(dd->ipath_r_portenable_shift + i,
356 &dd->ipath_rcvctrl);
357 clear_bit(dd->ipath_r_intravail_shift + i,
358 &dd->ipath_rcvctrl);
359 }
360 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
361 dd->ipath_rcvctrl);
362
363 spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
364 dd->ipath_sendctrl = 0U; /* no sdma, etc */
365 ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
366 ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
367 spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
368
369 ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
370
371 rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
372 if (rtmp != dd->ipath_rcvtidcnt)
373 dev_info(&dd->pcidev->dev, "tidcnt was %u before "
374 "reset, now %u, using original\n",
375 dd->ipath_rcvtidcnt, rtmp);
376 rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidbase);
377 if (rtmp != dd->ipath_rcvtidbase)
378 dev_info(&dd->pcidev->dev, "tidbase was %u before "
379 "reset, now %u, using original\n",
380 dd->ipath_rcvtidbase, rtmp);
381 rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
382 if (rtmp != dd->ipath_rcvegrcnt)
383 dev_info(&dd->pcidev->dev, "egrcnt was %u before "
384 "reset, now %u, using original\n",
385 dd->ipath_rcvegrcnt, rtmp);
386 rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrbase);
387 if (rtmp != dd->ipath_rcvegrbase)
388 dev_info(&dd->pcidev->dev, "egrbase was %u before "
389 "reset, now %u, using original\n",
390 dd->ipath_rcvegrbase, rtmp);
391
392 return 0;
393 }
394
init_pioavailregs(struct ipath_devdata * dd)395 static int init_pioavailregs(struct ipath_devdata *dd)
396 {
397 int ret;
398
399 dd->ipath_pioavailregs_dma = dma_alloc_coherent(
400 &dd->pcidev->dev, PAGE_SIZE, &dd->ipath_pioavailregs_phys,
401 GFP_KERNEL);
402 if (!dd->ipath_pioavailregs_dma) {
403 ipath_dev_err(dd, "failed to allocate PIOavail reg area "
404 "in memory\n");
405 ret = -ENOMEM;
406 goto done;
407 }
408
409 /*
410 * we really want L2 cache aligned, but for current CPUs of
411 * interest, they are the same.
412 */
413 dd->ipath_statusp = (u64 *)
414 ((char *)dd->ipath_pioavailregs_dma +
415 ((2 * L1_CACHE_BYTES +
416 dd->ipath_pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
417 /* copy the current value now that it's really allocated */
418 *dd->ipath_statusp = dd->_ipath_status;
419 /*
420 * setup buffer to hold freeze msg, accessible to apps,
421 * following statusp
422 */
423 dd->ipath_freezemsg = (char *)&dd->ipath_statusp[1];
424 /* and its length */
425 dd->ipath_freezelen = L1_CACHE_BYTES - sizeof(dd->ipath_statusp[0]);
426
427 ret = 0;
428
429 done:
430 return ret;
431 }
432
433 /**
434 * init_shadow_tids - allocate the shadow TID array
435 * @dd: the infinipath device
436 *
437 * allocate the shadow TID array, so we can ipath_munlock previous
438 * entries. It may make more sense to move the pageshadow to the
439 * port data structure, so we only allocate memory for ports actually
440 * in use, since we at 8k per port, now.
441 */
init_shadow_tids(struct ipath_devdata * dd)442 static void init_shadow_tids(struct ipath_devdata *dd)
443 {
444 struct page **pages;
445 dma_addr_t *addrs;
446
447 pages = vzalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
448 sizeof(struct page *));
449 if (!pages) {
450 ipath_dev_err(dd, "failed to allocate shadow page * "
451 "array, no expected sends!\n");
452 dd->ipath_pageshadow = NULL;
453 return;
454 }
455
456 addrs = vmalloc(dd->ipath_cfgports * dd->ipath_rcvtidcnt *
457 sizeof(dma_addr_t));
458 if (!addrs) {
459 ipath_dev_err(dd, "failed to allocate shadow dma handle "
460 "array, no expected sends!\n");
461 vfree(pages);
462 dd->ipath_pageshadow = NULL;
463 return;
464 }
465
466 dd->ipath_pageshadow = pages;
467 dd->ipath_physshadow = addrs;
468 }
469
enable_chip(struct ipath_devdata * dd,int reinit)470 static void enable_chip(struct ipath_devdata *dd, int reinit)
471 {
472 u32 val;
473 u64 rcvmask;
474 unsigned long flags;
475 int i;
476
477 if (!reinit)
478 init_waitqueue_head(&ipath_state_wait);
479
480 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
481 dd->ipath_rcvctrl);
482
483 spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
484 /* Enable PIO send, and update of PIOavail regs to memory. */
485 dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
486 INFINIPATH_S_PIOBUFAVAILUPD;
487
488 /*
489 * Set the PIO avail update threshold to host memory
490 * on chips that support it.
491 */
492 if (dd->ipath_pioupd_thresh)
493 dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
494 << INFINIPATH_S_UPDTHRESH_SHIFT;
495 ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
496 ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
497 spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
498
499 /*
500 * Enable kernel ports' receive and receive interrupt.
501 * Other ports done as user opens and inits them.
502 */
503 rcvmask = 1ULL;
504 dd->ipath_rcvctrl |= (rcvmask << dd->ipath_r_portenable_shift) |
505 (rcvmask << dd->ipath_r_intravail_shift);
506 if (!(dd->ipath_flags & IPATH_NODMA_RTAIL))
507 dd->ipath_rcvctrl |= (1ULL << dd->ipath_r_tailupd_shift);
508
509 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
510 dd->ipath_rcvctrl);
511
512 /*
513 * now ready for use. this should be cleared whenever we
514 * detect a reset, or initiate one.
515 */
516 dd->ipath_flags |= IPATH_INITTED;
517
518 /*
519 * Init our shadow copies of head from tail values,
520 * and write head values to match.
521 */
522 val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
523 ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
524
525 /* Initialize so we interrupt on next packet received */
526 ipath_write_ureg(dd, ur_rcvhdrhead,
527 dd->ipath_rhdrhead_intr_off |
528 dd->ipath_pd[0]->port_head, 0);
529
530 /*
531 * by now pioavail updates to memory should have occurred, so
532 * copy them into our working/shadow registers; this is in
533 * case something went wrong with abort, but mostly to get the
534 * initial values of the generation bit correct.
535 */
536 for (i = 0; i < dd->ipath_pioavregs; i++) {
537 __le64 pioavail;
538
539 /*
540 * Chip Errata bug 6641; even and odd qwords>3 are swapped.
541 */
542 if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
543 pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
544 else
545 pioavail = dd->ipath_pioavailregs_dma[i];
546 /*
547 * don't need to worry about ipath_pioavailkernel here
548 * because we will call ipath_chg_pioavailkernel() later
549 * in initialization, to busy out buffers as needed
550 */
551 dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail);
552 }
553 /* can get counters, stats, etc. */
554 dd->ipath_flags |= IPATH_PRESENT;
555 }
556
init_housekeeping(struct ipath_devdata * dd,int reinit)557 static int init_housekeeping(struct ipath_devdata *dd, int reinit)
558 {
559 char boardn[40];
560 int ret = 0;
561
562 /*
563 * have to clear shadow copies of registers at init that are
564 * not otherwise set here, or all kinds of bizarre things
565 * happen with driver on chip reset
566 */
567 dd->ipath_rcvhdrsize = 0;
568
569 /*
570 * Don't clear ipath_flags as 8bit mode was set before
571 * entering this func. However, we do set the linkstate to
572 * unknown, so we can watch for a transition.
573 * PRESENT is set because we want register reads to work,
574 * and the kernel infrastructure saw it in config space;
575 * We clear it if we have failures.
576 */
577 dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
578 dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
579 IPATH_LINKDOWN | IPATH_LINKINIT);
580
581 ipath_cdbg(VERBOSE, "Try to read spc chip revision\n");
582 dd->ipath_revision =
583 ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
584
585 /*
586 * set up fundamental info we need to use the chip; we assume
587 * if the revision reg and these regs are OK, we don't need to
588 * special case the rest
589 */
590 dd->ipath_sregbase =
591 ipath_read_kreg32(dd, dd->ipath_kregs->kr_sendregbase);
592 dd->ipath_cregbase =
593 ipath_read_kreg32(dd, dd->ipath_kregs->kr_counterregbase);
594 dd->ipath_uregbase =
595 ipath_read_kreg32(dd, dd->ipath_kregs->kr_userregbase);
596 ipath_cdbg(VERBOSE, "ipath_kregbase %p, sendbase %x usrbase %x, "
597 "cntrbase %x\n", dd->ipath_kregbase, dd->ipath_sregbase,
598 dd->ipath_uregbase, dd->ipath_cregbase);
599 if ((dd->ipath_revision & 0xffffffff) == 0xffffffff
600 || (dd->ipath_sregbase & 0xffffffff) == 0xffffffff
601 || (dd->ipath_cregbase & 0xffffffff) == 0xffffffff
602 || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
603 ipath_dev_err(dd, "Register read failures from chip, "
604 "giving up initialization\n");
605 dd->ipath_flags &= ~IPATH_PRESENT;
606 ret = -ENODEV;
607 goto done;
608 }
609
610
611 /* clear diagctrl register, in case diags were running and crashed */
612 ipath_write_kreg (dd, dd->ipath_kregs->kr_hwdiagctrl, 0);
613
614 /* clear the initial reset flag, in case first driver load */
615 ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
616 INFINIPATH_E_RESET);
617
618 ipath_cdbg(VERBOSE, "Revision %llx (PCI %x)\n",
619 (unsigned long long) dd->ipath_revision,
620 dd->ipath_pcirev);
621
622 if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
623 INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
624 ipath_dev_err(dd, "Driver only handles version %d, "
625 "chip swversion is %d (%llx), failng\n",
626 IPATH_CHIP_SWVERSION,
627 (int)(dd->ipath_revision >>
628 INFINIPATH_R_SOFTWARE_SHIFT) &
629 INFINIPATH_R_SOFTWARE_MASK,
630 (unsigned long long) dd->ipath_revision);
631 ret = -ENOSYS;
632 goto done;
633 }
634 dd->ipath_majrev = (u8) ((dd->ipath_revision >>
635 INFINIPATH_R_CHIPREVMAJOR_SHIFT) &
636 INFINIPATH_R_CHIPREVMAJOR_MASK);
637 dd->ipath_minrev = (u8) ((dd->ipath_revision >>
638 INFINIPATH_R_CHIPREVMINOR_SHIFT) &
639 INFINIPATH_R_CHIPREVMINOR_MASK);
640 dd->ipath_boardrev = (u8) ((dd->ipath_revision >>
641 INFINIPATH_R_BOARDID_SHIFT) &
642 INFINIPATH_R_BOARDID_MASK);
643
644 ret = dd->ipath_f_get_boardname(dd, boardn, sizeof boardn);
645
646 snprintf(dd->ipath_boardversion, sizeof(dd->ipath_boardversion),
647 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, PCI %u, "
648 "SW Compat %u\n",
649 IPATH_CHIP_VERS_MAJ, IPATH_CHIP_VERS_MIN, boardn,
650 (unsigned)(dd->ipath_revision >> INFINIPATH_R_ARCH_SHIFT) &
651 INFINIPATH_R_ARCH_MASK,
652 dd->ipath_majrev, dd->ipath_minrev, dd->ipath_pcirev,
653 (unsigned)(dd->ipath_revision >>
654 INFINIPATH_R_SOFTWARE_SHIFT) &
655 INFINIPATH_R_SOFTWARE_MASK);
656
657 ipath_dbg("%s", dd->ipath_boardversion);
658
659 if (ret)
660 goto done;
661
662 if (reinit)
663 ret = init_chip_reset(dd);
664 else
665 ret = init_chip_first(dd);
666
667 done:
668 return ret;
669 }
670
verify_interrupt(unsigned long opaque)671 static void verify_interrupt(unsigned long opaque)
672 {
673 struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
674
675 if (!dd)
676 return; /* being torn down */
677
678 /*
679 * If we don't have any interrupts, let the user know and
680 * don't bother checking again.
681 */
682 if (dd->ipath_int_counter == 0) {
683 if (!dd->ipath_f_intr_fallback(dd))
684 dev_err(&dd->pcidev->dev, "No interrupts detected, "
685 "not usable.\n");
686 else /* re-arm the timer to see if fallback works */
687 mod_timer(&dd->ipath_intrchk_timer, jiffies + HZ/2);
688 } else
689 ipath_cdbg(VERBOSE, "%u interrupts at timer check\n",
690 dd->ipath_int_counter);
691 }
692
693 /**
694 * ipath_init_chip - do the actual initialization sequence on the chip
695 * @dd: the infinipath device
696 * @reinit: reinitializing, so don't allocate new memory
697 *
698 * Do the actual initialization sequence on the chip. This is done
699 * both from the init routine called from the PCI infrastructure, and
700 * when we reset the chip, or detect that it was reset internally,
701 * or it's administratively re-enabled.
702 *
703 * Memory allocation here and in called routines is only done in
704 * the first case (reinit == 0). We have to be careful, because even
705 * without memory allocation, we need to re-write all the chip registers
706 * TIDs, etc. after the reset or enable has completed.
707 */
ipath_init_chip(struct ipath_devdata * dd,int reinit)708 int ipath_init_chip(struct ipath_devdata *dd, int reinit)
709 {
710 int ret = 0;
711 u32 kpiobufs, defkbufs;
712 u32 piobufs, uports;
713 u64 val;
714 struct ipath_portdata *pd;
715 gfp_t gfp_flags = GFP_USER | __GFP_COMP;
716
717 ret = init_housekeeping(dd, reinit);
718 if (ret)
719 goto done;
720
721 /*
722 * We could bump this to allow for full rcvegrcnt + rcvtidcnt,
723 * but then it no longer nicely fits power of two, and since
724 * we now use routines that backend onto __get_free_pages, the
725 * rest would be wasted.
726 */
727 dd->ipath_rcvhdrcnt = max(dd->ipath_p0_rcvegrcnt, dd->ipath_rcvegrcnt);
728 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
729 dd->ipath_rcvhdrcnt);
730
731 /*
732 * Set up the shadow copies of the piobufavail registers,
733 * which we compare against the chip registers for now, and
734 * the in memory DMA'ed copies of the registers. This has to
735 * be done early, before we calculate lastport, etc.
736 */
737 piobufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
738 /*
739 * calc number of pioavail registers, and save it; we have 2
740 * bits per buffer.
741 */
742 dd->ipath_pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2)
743 / (sizeof(u64) * BITS_PER_BYTE / 2);
744 uports = dd->ipath_cfgports ? dd->ipath_cfgports - 1 : 0;
745 if (piobufs > 144)
746 defkbufs = 32 + dd->ipath_pioreserved;
747 else
748 defkbufs = 16 + dd->ipath_pioreserved;
749
750 if (ipath_kpiobufs && (ipath_kpiobufs +
751 (uports * IPATH_MIN_USER_PORT_BUFCNT)) > piobufs) {
752 int i = (int) piobufs -
753 (int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
754 if (i < 1)
755 i = 1;
756 dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
757 "%d for kernel leaves too few for %d user ports "
758 "(%d each); using %u\n", ipath_kpiobufs,
759 piobufs, uports, IPATH_MIN_USER_PORT_BUFCNT, i);
760 /*
761 * shouldn't change ipath_kpiobufs, because could be
762 * different for different devices...
763 */
764 kpiobufs = i;
765 } else if (ipath_kpiobufs)
766 kpiobufs = ipath_kpiobufs;
767 else
768 kpiobufs = defkbufs;
769 dd->ipath_lastport_piobuf = piobufs - kpiobufs;
770 dd->ipath_pbufsport =
771 uports ? dd->ipath_lastport_piobuf / uports : 0;
772 /* if not an even divisor, some user ports get extra buffers */
773 dd->ipath_ports_extrabuf = dd->ipath_lastport_piobuf -
774 (dd->ipath_pbufsport * uports);
775 if (dd->ipath_ports_extrabuf)
776 ipath_dbg("%u pbufs/port leaves some unused, add 1 buffer to "
777 "ports <= %u\n", dd->ipath_pbufsport,
778 dd->ipath_ports_extrabuf);
779 dd->ipath_lastpioindex = 0;
780 dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
781 /* ipath_pioavailshadow initialized earlier */
782 ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
783 "each for %u user ports\n", kpiobufs,
784 piobufs, dd->ipath_pbufsport, uports);
785 ret = dd->ipath_f_early_init(dd);
786 if (ret) {
787 ipath_dev_err(dd, "Early initialization failure\n");
788 goto done;
789 }
790
791 /*
792 * Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
793 * done after early_init.
794 */
795 dd->ipath_hdrqlast =
796 dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
797 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
798 dd->ipath_rcvhdrentsize);
799 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
800 dd->ipath_rcvhdrsize);
801
802 if (!reinit) {
803 ret = init_pioavailregs(dd);
804 init_shadow_tids(dd);
805 if (ret)
806 goto done;
807 }
808
809 ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
810 dd->ipath_pioavailregs_phys);
811
812 /*
813 * this is to detect s/w errors, which the h/w works around by
814 * ignoring the low 6 bits of address, if it wasn't aligned.
815 */
816 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpioavailaddr);
817 if (val != dd->ipath_pioavailregs_phys) {
818 ipath_dev_err(dd, "Catastrophic software error, "
819 "SendPIOAvailAddr written as %lx, "
820 "read back as %llx\n",
821 (unsigned long) dd->ipath_pioavailregs_phys,
822 (unsigned long long) val);
823 ret = -EINVAL;
824 goto done;
825 }
826
827 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvbthqp, IPATH_KD_QP);
828
829 /*
830 * make sure we are not in freeze, and PIO send enabled, so
831 * writes to pbc happen
832 */
833 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask, 0ULL);
834 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
835 ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
836 ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
837
838 /*
839 * before error clears, since we expect serdes pll errors during
840 * this, the first time after reset
841 */
842 if (bringup_link(dd)) {
843 dev_info(&dd->pcidev->dev, "Failed to bringup IB link\n");
844 ret = -ENETDOWN;
845 goto done;
846 }
847
848 /*
849 * clear any "expected" hwerrs from reset and/or initialization
850 * clear any that aren't enabled (at least this once), and then
851 * set the enable mask
852 */
853 dd->ipath_f_init_hwerrors(dd);
854 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
855 ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED);
856 ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
857 dd->ipath_hwerrmask);
858
859 /* clear all */
860 ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
861 /* enable errors that are masked, at least this first time. */
862 ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
863 ~dd->ipath_maskederrs);
864 dd->ipath_maskederrs = 0; /* don't re-enable ignored in timer */
865 dd->ipath_errormask =
866 ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
867 /* clear any interrupts up to this point (ints still not enabled) */
868 ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
869
870 dd->ipath_f_tidtemplate(dd);
871
872 /*
873 * Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
874 * re-init, the simplest way to handle this is to free
875 * existing, and re-allocate.
876 * Need to re-create rest of port 0 portdata as well.
877 */
878 pd = dd->ipath_pd[0];
879 if (reinit) {
880 struct ipath_portdata *npd;
881
882 /*
883 * Alloc and init new ipath_portdata for port0,
884 * Then free old pd. Could lead to fragmentation, but also
885 * makes later support for hot-swap easier.
886 */
887 npd = create_portdata0(dd);
888 if (npd) {
889 ipath_free_pddata(dd, pd);
890 dd->ipath_pd[0] = npd;
891 pd = npd;
892 } else {
893 ipath_dev_err(dd, "Unable to allocate portdata"
894 " for port 0, failing\n");
895 ret = -ENOMEM;
896 goto done;
897 }
898 }
899 ret = ipath_create_rcvhdrq(dd, pd);
900 if (!ret)
901 ret = create_port0_egr(dd);
902 if (ret) {
903 ipath_dev_err(dd, "failed to allocate kernel port's "
904 "rcvhdrq and/or egr bufs\n");
905 goto done;
906 }
907 else
908 enable_chip(dd, reinit);
909
910 /* after enable_chip, so pioavailshadow setup */
911 ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
912
913 /*
914 * Cancel any possible active sends from early driver load.
915 * Follows early_init because some chips have to initialize
916 * PIO buffers in early_init to avoid false parity errors.
917 * After enable and ipath_chg_pioavailkernel so we can safely
918 * enable pioavail updates and PIOENABLE; packets are now
919 * ready to go out.
920 */
921 ipath_cancel_sends(dd, 1);
922
923 if (!reinit) {
924 /*
925 * Used when we close a port, for DMA already in flight
926 * at close.
927 */
928 dd->ipath_dummy_hdrq = dma_alloc_coherent(
929 &dd->pcidev->dev, dd->ipath_pd[0]->port_rcvhdrq_size,
930 &dd->ipath_dummy_hdrq_phys,
931 gfp_flags);
932 if (!dd->ipath_dummy_hdrq) {
933 dev_info(&dd->pcidev->dev,
934 "Couldn't allocate 0x%lx bytes for dummy hdrq\n",
935 dd->ipath_pd[0]->port_rcvhdrq_size);
936 /* fallback to just 0'ing */
937 dd->ipath_dummy_hdrq_phys = 0UL;
938 }
939 }
940
941 /*
942 * cause retrigger of pending interrupts ignored during init,
943 * even if we had errors
944 */
945 ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
946
947 if (!dd->ipath_stats_timer_active) {
948 /*
949 * first init, or after an admin disable/enable
950 * set up stats retrieval timer, even if we had errors
951 * in last portion of setup
952 */
953 init_timer(&dd->ipath_stats_timer);
954 dd->ipath_stats_timer.function = ipath_get_faststats;
955 dd->ipath_stats_timer.data = (unsigned long) dd;
956 /* every 5 seconds; */
957 dd->ipath_stats_timer.expires = jiffies + 5 * HZ;
958 /* takes ~16 seconds to overflow at full IB 4x bandwdith */
959 add_timer(&dd->ipath_stats_timer);
960 dd->ipath_stats_timer_active = 1;
961 }
962
963 /* Set up SendDMA if chip supports it */
964 if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
965 ret = setup_sdma(dd);
966
967 /* Set up HoL state */
968 init_timer(&dd->ipath_hol_timer);
969 dd->ipath_hol_timer.function = ipath_hol_event;
970 dd->ipath_hol_timer.data = (unsigned long)dd;
971 dd->ipath_hol_state = IPATH_HOL_UP;
972
973 done:
974 if (!ret) {
975 *dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
976 if (!dd->ipath_f_intrsetup(dd)) {
977 /* now we can enable all interrupts from the chip */
978 ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
979 -1LL);
980 /* force re-interrupt of any pending interrupts. */
981 ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear,
982 0ULL);
983 /* chip is usable; mark it as initialized */
984 *dd->ipath_statusp |= IPATH_STATUS_INITTED;
985
986 /*
987 * setup to verify we get an interrupt, and fallback
988 * to an alternate if necessary and possible
989 */
990 if (!reinit) {
991 init_timer(&dd->ipath_intrchk_timer);
992 dd->ipath_intrchk_timer.function =
993 verify_interrupt;
994 dd->ipath_intrchk_timer.data =
995 (unsigned long) dd;
996 }
997 dd->ipath_intrchk_timer.expires = jiffies + HZ/2;
998 add_timer(&dd->ipath_intrchk_timer);
999 } else
1000 ipath_dev_err(dd, "No interrupts enabled, couldn't "
1001 "setup interrupt address\n");
1002
1003 if (dd->ipath_cfgports > ipath_stats.sps_nports)
1004 /*
1005 * sps_nports is a global, so, we set it to
1006 * the highest number of ports of any of the
1007 * chips we find; we never decrement it, at
1008 * least for now. Since this might have changed
1009 * over disable/enable or prior to reset, always
1010 * do the check and potentially adjust.
1011 */
1012 ipath_stats.sps_nports = dd->ipath_cfgports;
1013 } else
1014 ipath_dbg("Failed (%d) to initialize chip\n", ret);
1015
1016 /* if ret is non-zero, we probably should do some cleanup
1017 here... */
1018 return ret;
1019 }
1020
ipath_set_kpiobufs(const char * str,struct kernel_param * kp)1021 static int ipath_set_kpiobufs(const char *str, struct kernel_param *kp)
1022 {
1023 struct ipath_devdata *dd;
1024 unsigned long flags;
1025 unsigned short val;
1026 int ret;
1027
1028 ret = ipath_parse_ushort(str, &val);
1029
1030 spin_lock_irqsave(&ipath_devs_lock, flags);
1031
1032 if (ret < 0)
1033 goto bail;
1034
1035 if (val == 0) {
1036 ret = -EINVAL;
1037 goto bail;
1038 }
1039
1040 list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
1041 if (dd->ipath_kregbase)
1042 continue;
1043 if (val > (dd->ipath_piobcnt2k + dd->ipath_piobcnt4k -
1044 (dd->ipath_cfgports *
1045 IPATH_MIN_USER_PORT_BUFCNT)))
1046 {
1047 ipath_dev_err(
1048 dd,
1049 "Allocating %d PIO bufs for kernel leaves "
1050 "too few for %d user ports (%d each)\n",
1051 val, dd->ipath_cfgports - 1,
1052 IPATH_MIN_USER_PORT_BUFCNT);
1053 ret = -EINVAL;
1054 goto bail;
1055 }
1056 dd->ipath_lastport_piobuf =
1057 dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - val;
1058 }
1059
1060 ipath_kpiobufs = val;
1061 ret = 0;
1062 bail:
1063 spin_unlock_irqrestore(&ipath_devs_lock, flags);
1064
1065 return ret;
1066 }
1067