1 /*
2 * USB driver for Gigaset 307x directly or using M105 Data.
3 *
4 * Copyright (c) 2001 by Stefan Eilers
5 * and Hansjoerg Lipp <hjlipp@web.de>.
6 *
7 * This driver was derived from the USB skeleton driver by
8 * Greg Kroah-Hartman <greg@kroah.com>
9 *
10 * =====================================================================
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 * =====================================================================
16 */
17
18 #include "gigaset.h"
19 #include <linux/usb.h>
20 #include <linux/module.h>
21 #include <linux/moduleparam.h>
22
23 /* Version Information */
24 #define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
25 #define DRIVER_DESC "USB Driver for Gigaset 307x using M105"
26
27 /* Module parameters */
28
29 static int startmode = SM_ISDN;
30 static int cidmode = 1;
31
32 module_param(startmode, int, S_IRUGO);
33 module_param(cidmode, int, S_IRUGO);
34 MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
35 MODULE_PARM_DESC(cidmode, "Call-ID mode");
36
37 #define GIGASET_MINORS 1
38 #define GIGASET_MINOR 8
39 #define GIGASET_MODULENAME "usb_gigaset"
40 #define GIGASET_DEVNAME "ttyGU"
41
42 /* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
43 #define IF_WRITEBUF 264
44
45 /* Values for the Gigaset M105 Data */
46 #define USB_M105_VENDOR_ID 0x0681
47 #define USB_M105_PRODUCT_ID 0x0009
48
49 /* table of devices that work with this driver */
50 static const struct usb_device_id gigaset_table[] = {
51 { USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
52 { } /* Terminating entry */
53 };
54
55 MODULE_DEVICE_TABLE(usb, gigaset_table);
56
57 /*
58 * Control requests (empty fields: 00)
59 *
60 * RT|RQ|VALUE|INDEX|LEN |DATA
61 * In:
62 * C1 08 01
63 * Get flags (1 byte). Bits: 0=dtr,1=rts,3-7:?
64 * C1 0F ll ll
65 * Get device information/status (llll: 0x200 and 0x40 seen).
66 * Real size: I only saw MIN(llll,0x64).
67 * Contents: seems to be always the same...
68 * offset 0x00: Length of this structure (0x64) (len: 1,2,3 bytes)
69 * offset 0x3c: String (16 bit chars): "MCCI USB Serial V2.0"
70 * rest: ?
71 * Out:
72 * 41 11
73 * Initialize/reset device ?
74 * 41 00 xx 00
75 * ? (xx=00 or 01; 01 on start, 00 on close)
76 * 41 07 vv mm
77 * Set/clear flags vv=value, mm=mask (see RQ 08)
78 * 41 12 xx
79 * Used before the following configuration requests are issued
80 * (with xx=0x0f). I've seen other values<0xf, though.
81 * 41 01 xx xx
82 * Set baud rate. xxxx=ceil(0x384000/rate)=trunc(0x383fff/rate)+1.
83 * 41 03 ps bb
84 * Set byte size and parity. p: 0x20=even,0x10=odd,0x00=no parity
85 * [ 0x30: m, 0x40: s ]
86 * [s: 0: 1 stop bit; 1: 1.5; 2: 2]
87 * bb: bits/byte (seen 7 and 8)
88 * 41 13 -- -- -- -- 10 00 ww 00 00 00 xx 00 00 00 yy 00 00 00 zz 00 00 00
89 * ??
90 * Initialization: 01, 40, 00, 00
91 * Open device: 00 40, 00, 00
92 * yy and zz seem to be equal, either 0x00 or 0x0a
93 * (ww,xx) pairs seen: (00,00), (00,40), (01,40), (09,80), (19,80)
94 * 41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
95 * Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
96 * xx is usually 0x00 but was 0x7e before starting data transfer
97 * in unimodem mode. So, this might be an array of characters that
98 * need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
99 *
100 * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
101 * flags per packet.
102 */
103
104 /* functions called if a device of this driver is connected/disconnected */
105 static int gigaset_probe(struct usb_interface *interface,
106 const struct usb_device_id *id);
107 static void gigaset_disconnect(struct usb_interface *interface);
108
109 /* functions called before/after suspend */
110 static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
111 static int gigaset_resume(struct usb_interface *intf);
112 static int gigaset_pre_reset(struct usb_interface *intf);
113
114 static struct gigaset_driver *driver;
115
116 /* usb specific object needed to register this driver with the usb subsystem */
117 static struct usb_driver gigaset_usb_driver = {
118 .name = GIGASET_MODULENAME,
119 .probe = gigaset_probe,
120 .disconnect = gigaset_disconnect,
121 .id_table = gigaset_table,
122 .suspend = gigaset_suspend,
123 .resume = gigaset_resume,
124 .reset_resume = gigaset_resume,
125 .pre_reset = gigaset_pre_reset,
126 .post_reset = gigaset_resume,
127 .disable_hub_initiated_lpm = 1,
128 };
129
130 struct usb_cardstate {
131 struct usb_device *udev; /* usb device pointer */
132 struct usb_interface *interface; /* interface for this device */
133 int busy; /* bulk output in progress */
134
135 /* Output buffer */
136 unsigned char *bulk_out_buffer;
137 int bulk_out_size;
138 __u8 bulk_out_endpointAddr;
139 struct urb *bulk_out_urb;
140
141 /* Input buffer */
142 unsigned char *rcvbuf;
143 int rcvbuf_size;
144 struct urb *read_urb;
145 __u8 int_in_endpointAddr;
146
147 char bchars[6]; /* for request 0x19 */
148 };
149
tiocm_to_gigaset(unsigned state)150 static inline unsigned tiocm_to_gigaset(unsigned state)
151 {
152 return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0);
153 }
154
gigaset_set_modem_ctrl(struct cardstate * cs,unsigned old_state,unsigned new_state)155 static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
156 unsigned new_state)
157 {
158 struct usb_device *udev = cs->hw.usb->udev;
159 unsigned mask, val;
160 int r;
161
162 mask = tiocm_to_gigaset(old_state ^ new_state);
163 val = tiocm_to_gigaset(new_state);
164
165 gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
166 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
167 (val & 0xff) | ((mask & 0xff) << 8), 0,
168 NULL, 0, 2000 /* timeout? */);
169 if (r < 0)
170 return r;
171 return 0;
172 }
173
174 /*
175 * Set M105 configuration value
176 * using undocumented device commands reverse engineered from USB traces
177 * of the Siemens Windows driver
178 */
set_value(struct cardstate * cs,u8 req,u16 val)179 static int set_value(struct cardstate *cs, u8 req, u16 val)
180 {
181 struct usb_device *udev = cs->hw.usb->udev;
182 int r, r2;
183
184 gig_dbg(DEBUG_USBREQ, "request %02x (%04x)",
185 (unsigned)req, (unsigned)val);
186 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x12, 0x41,
187 0xf /*?*/, 0, NULL, 0, 2000 /*?*/);
188 /* no idea what this does */
189 if (r < 0) {
190 dev_err(&udev->dev, "error %d on request 0x12\n", -r);
191 return r;
192 }
193
194 r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), req, 0x41,
195 val, 0, NULL, 0, 2000 /*?*/);
196 if (r < 0)
197 dev_err(&udev->dev, "error %d on request 0x%02x\n",
198 -r, (unsigned)req);
199
200 r2 = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
201 0, 0, cs->hw.usb->bchars, 6, 2000 /*?*/);
202 if (r2 < 0)
203 dev_err(&udev->dev, "error %d on request 0x19\n", -r2);
204
205 return r < 0 ? r : (r2 < 0 ? r2 : 0);
206 }
207
208 /*
209 * set the baud rate on the internal serial adapter
210 * using the undocumented parameter setting command
211 */
gigaset_baud_rate(struct cardstate * cs,unsigned cflag)212 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
213 {
214 u16 val;
215 u32 rate;
216
217 cflag &= CBAUD;
218
219 switch (cflag) {
220 case B300: rate = 300; break;
221 case B600: rate = 600; break;
222 case B1200: rate = 1200; break;
223 case B2400: rate = 2400; break;
224 case B4800: rate = 4800; break;
225 case B9600: rate = 9600; break;
226 case B19200: rate = 19200; break;
227 case B38400: rate = 38400; break;
228 case B57600: rate = 57600; break;
229 case B115200: rate = 115200; break;
230 default:
231 rate = 9600;
232 dev_err(cs->dev, "unsupported baudrate request 0x%x,"
233 " using default of B9600\n", cflag);
234 }
235
236 val = 0x383fff / rate + 1;
237
238 return set_value(cs, 1, val);
239 }
240
241 /*
242 * set the line format on the internal serial adapter
243 * using the undocumented parameter setting command
244 */
gigaset_set_line_ctrl(struct cardstate * cs,unsigned cflag)245 static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
246 {
247 u16 val = 0;
248
249 /* set the parity */
250 if (cflag & PARENB)
251 val |= (cflag & PARODD) ? 0x10 : 0x20;
252
253 /* set the number of data bits */
254 switch (cflag & CSIZE) {
255 case CS5:
256 val |= 5 << 8; break;
257 case CS6:
258 val |= 6 << 8; break;
259 case CS7:
260 val |= 7 << 8; break;
261 case CS8:
262 val |= 8 << 8; break;
263 default:
264 dev_err(cs->dev, "CSIZE was not CS5-CS8, using default of 8\n");
265 val |= 8 << 8;
266 break;
267 }
268
269 /* set the number of stop bits */
270 if (cflag & CSTOPB) {
271 if ((cflag & CSIZE) == CS5)
272 val |= 1; /* 1.5 stop bits */
273 else
274 val |= 2; /* 2 stop bits */
275 }
276
277 return set_value(cs, 3, val);
278 }
279
280
281 /*============================================================================*/
gigaset_init_bchannel(struct bc_state * bcs)282 static int gigaset_init_bchannel(struct bc_state *bcs)
283 {
284 /* nothing to do for M10x */
285 gigaset_bchannel_up(bcs);
286 return 0;
287 }
288
gigaset_close_bchannel(struct bc_state * bcs)289 static int gigaset_close_bchannel(struct bc_state *bcs)
290 {
291 /* nothing to do for M10x */
292 gigaset_bchannel_down(bcs);
293 return 0;
294 }
295
296 static int write_modem(struct cardstate *cs);
297 static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb);
298
299
300 /* Write tasklet handler: Continue sending current skb, or send command, or
301 * start sending an skb from the send queue.
302 */
gigaset_modem_fill(unsigned long data)303 static void gigaset_modem_fill(unsigned long data)
304 {
305 struct cardstate *cs = (struct cardstate *) data;
306 struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
307 struct cmdbuf_t *cb;
308 int again;
309
310 gig_dbg(DEBUG_OUTPUT, "modem_fill");
311
312 if (cs->hw.usb->busy) {
313 gig_dbg(DEBUG_OUTPUT, "modem_fill: busy");
314 return;
315 }
316
317 do {
318 again = 0;
319 if (!bcs->tx_skb) { /* no skb is being sent */
320 cb = cs->cmdbuf;
321 if (cb) { /* commands to send? */
322 gig_dbg(DEBUG_OUTPUT, "modem_fill: cb");
323 if (send_cb(cs, cb) < 0) {
324 gig_dbg(DEBUG_OUTPUT,
325 "modem_fill: send_cb failed");
326 again = 1; /* no callback will be
327 called! */
328 }
329 } else { /* skbs to send? */
330 bcs->tx_skb = skb_dequeue(&bcs->squeue);
331 if (bcs->tx_skb)
332 gig_dbg(DEBUG_INTR,
333 "Dequeued skb (Adr: %lx)!",
334 (unsigned long) bcs->tx_skb);
335 }
336 }
337
338 if (bcs->tx_skb) {
339 gig_dbg(DEBUG_OUTPUT, "modem_fill: tx_skb");
340 if (write_modem(cs) < 0) {
341 gig_dbg(DEBUG_OUTPUT,
342 "modem_fill: write_modem failed");
343 again = 1; /* no callback will be called! */
344 }
345 }
346 } while (again);
347 }
348
349 /*
350 * Interrupt Input URB completion routine
351 */
gigaset_read_int_callback(struct urb * urb)352 static void gigaset_read_int_callback(struct urb *urb)
353 {
354 struct cardstate *cs = urb->context;
355 struct inbuf_t *inbuf = cs->inbuf;
356 int status = urb->status;
357 int r;
358 unsigned numbytes;
359 unsigned char *src;
360 unsigned long flags;
361
362 if (!status) {
363 numbytes = urb->actual_length;
364
365 if (numbytes) {
366 src = cs->hw.usb->rcvbuf;
367 if (unlikely(*src))
368 dev_warn(cs->dev,
369 "%s: There was no leading 0, but 0x%02x!\n",
370 __func__, (unsigned) *src);
371 ++src; /* skip leading 0x00 */
372 --numbytes;
373 if (gigaset_fill_inbuf(inbuf, src, numbytes)) {
374 gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
375 gigaset_schedule_event(inbuf->cs);
376 }
377 } else
378 gig_dbg(DEBUG_INTR, "Received zero block length");
379 } else {
380 /* The urb might have been killed. */
381 gig_dbg(DEBUG_ANY, "%s - nonzero status received: %d",
382 __func__, status);
383 if (status == -ENOENT || status == -ESHUTDOWN)
384 /* killed or endpoint shutdown: don't resubmit */
385 return;
386 }
387
388 /* resubmit URB */
389 spin_lock_irqsave(&cs->lock, flags);
390 if (!cs->connected) {
391 spin_unlock_irqrestore(&cs->lock, flags);
392 pr_err("%s: disconnected\n", __func__);
393 return;
394 }
395 r = usb_submit_urb(urb, GFP_ATOMIC);
396 spin_unlock_irqrestore(&cs->lock, flags);
397 if (r)
398 dev_err(cs->dev, "error %d resubmitting URB\n", -r);
399 }
400
401
402 /* This callback routine is called when data was transmitted to the device. */
gigaset_write_bulk_callback(struct urb * urb)403 static void gigaset_write_bulk_callback(struct urb *urb)
404 {
405 struct cardstate *cs = urb->context;
406 int status = urb->status;
407 unsigned long flags;
408
409 switch (status) {
410 case 0: /* normal completion */
411 break;
412 case -ENOENT: /* killed */
413 gig_dbg(DEBUG_ANY, "%s: killed", __func__);
414 cs->hw.usb->busy = 0;
415 return;
416 default:
417 dev_err(cs->dev, "bulk transfer failed (status %d)\n",
418 -status);
419 /* That's all we can do. Communication problems
420 are handled by timeouts or network protocols. */
421 }
422
423 spin_lock_irqsave(&cs->lock, flags);
424 if (!cs->connected) {
425 pr_err("%s: disconnected\n", __func__);
426 } else {
427 cs->hw.usb->busy = 0;
428 tasklet_schedule(&cs->write_tasklet);
429 }
430 spin_unlock_irqrestore(&cs->lock, flags);
431 }
432
send_cb(struct cardstate * cs,struct cmdbuf_t * cb)433 static int send_cb(struct cardstate *cs, struct cmdbuf_t *cb)
434 {
435 struct cmdbuf_t *tcb;
436 unsigned long flags;
437 int count;
438 int status = -ENOENT;
439 struct usb_cardstate *ucs = cs->hw.usb;
440
441 do {
442 if (!cb->len) {
443 tcb = cb;
444
445 spin_lock_irqsave(&cs->cmdlock, flags);
446 cs->cmdbytes -= cs->curlen;
447 gig_dbg(DEBUG_OUTPUT, "send_cb: sent %u bytes, %u left",
448 cs->curlen, cs->cmdbytes);
449 cs->cmdbuf = cb = cb->next;
450 if (cb) {
451 cb->prev = NULL;
452 cs->curlen = cb->len;
453 } else {
454 cs->lastcmdbuf = NULL;
455 cs->curlen = 0;
456 }
457 spin_unlock_irqrestore(&cs->cmdlock, flags);
458
459 if (tcb->wake_tasklet)
460 tasklet_schedule(tcb->wake_tasklet);
461 kfree(tcb);
462 }
463 if (cb) {
464 count = min(cb->len, ucs->bulk_out_size);
465 gig_dbg(DEBUG_OUTPUT, "send_cb: send %d bytes", count);
466
467 usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
468 usb_sndbulkpipe(ucs->udev,
469 ucs->bulk_out_endpointAddr & 0x0f),
470 cb->buf + cb->offset, count,
471 gigaset_write_bulk_callback, cs);
472
473 cb->offset += count;
474 cb->len -= count;
475 ucs->busy = 1;
476
477 spin_lock_irqsave(&cs->lock, flags);
478 status = cs->connected ?
479 usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
480 -ENODEV;
481 spin_unlock_irqrestore(&cs->lock, flags);
482
483 if (status) {
484 ucs->busy = 0;
485 dev_err(cs->dev,
486 "could not submit urb (error %d)\n",
487 -status);
488 cb->len = 0; /* skip urb => remove cb+wakeup
489 in next loop cycle */
490 }
491 }
492 } while (cb && status); /* next command on error */
493
494 return status;
495 }
496
497 /* Send command to device. */
gigaset_write_cmd(struct cardstate * cs,struct cmdbuf_t * cb)498 static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
499 {
500 unsigned long flags;
501
502 gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
503 DEBUG_TRANSCMD : DEBUG_LOCKCMD,
504 "CMD Transmit", cb->len, cb->buf);
505
506 spin_lock_irqsave(&cs->cmdlock, flags);
507 cb->prev = cs->lastcmdbuf;
508 if (cs->lastcmdbuf)
509 cs->lastcmdbuf->next = cb;
510 else {
511 cs->cmdbuf = cb;
512 cs->curlen = cb->len;
513 }
514 cs->cmdbytes += cb->len;
515 cs->lastcmdbuf = cb;
516 spin_unlock_irqrestore(&cs->cmdlock, flags);
517
518 spin_lock_irqsave(&cs->lock, flags);
519 if (cs->connected)
520 tasklet_schedule(&cs->write_tasklet);
521 spin_unlock_irqrestore(&cs->lock, flags);
522 return cb->len;
523 }
524
gigaset_write_room(struct cardstate * cs)525 static int gigaset_write_room(struct cardstate *cs)
526 {
527 unsigned bytes;
528
529 bytes = cs->cmdbytes;
530 return bytes < IF_WRITEBUF ? IF_WRITEBUF - bytes : 0;
531 }
532
gigaset_chars_in_buffer(struct cardstate * cs)533 static int gigaset_chars_in_buffer(struct cardstate *cs)
534 {
535 return cs->cmdbytes;
536 }
537
538 /*
539 * set the break characters on the internal serial adapter
540 * using undocumented device commands reverse engineered from USB traces
541 * of the Siemens Windows driver
542 */
gigaset_brkchars(struct cardstate * cs,const unsigned char buf[6])543 static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
544 {
545 struct usb_device *udev = cs->hw.usb->udev;
546
547 gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf);
548 memcpy(cs->hw.usb->bchars, buf, 6);
549 return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
550 0, 0, &buf, 6, 2000);
551 }
552
gigaset_freebcshw(struct bc_state * bcs)553 static void gigaset_freebcshw(struct bc_state *bcs)
554 {
555 /* unused */
556 }
557
558 /* Initialize the b-channel structure */
gigaset_initbcshw(struct bc_state * bcs)559 static int gigaset_initbcshw(struct bc_state *bcs)
560 {
561 /* unused */
562 bcs->hw.usb = NULL;
563 return 0;
564 }
565
gigaset_reinitbcshw(struct bc_state * bcs)566 static void gigaset_reinitbcshw(struct bc_state *bcs)
567 {
568 /* nothing to do for M10x */
569 }
570
gigaset_freecshw(struct cardstate * cs)571 static void gigaset_freecshw(struct cardstate *cs)
572 {
573 tasklet_kill(&cs->write_tasklet);
574 kfree(cs->hw.usb);
575 }
576
gigaset_initcshw(struct cardstate * cs)577 static int gigaset_initcshw(struct cardstate *cs)
578 {
579 struct usb_cardstate *ucs;
580
581 cs->hw.usb = ucs =
582 kmalloc(sizeof(struct usb_cardstate), GFP_KERNEL);
583 if (!ucs) {
584 pr_err("out of memory\n");
585 return -ENOMEM;
586 }
587
588 ucs->bchars[0] = 0;
589 ucs->bchars[1] = 0;
590 ucs->bchars[2] = 0;
591 ucs->bchars[3] = 0;
592 ucs->bchars[4] = 0x11;
593 ucs->bchars[5] = 0x13;
594 ucs->bulk_out_buffer = NULL;
595 ucs->bulk_out_urb = NULL;
596 ucs->read_urb = NULL;
597 tasklet_init(&cs->write_tasklet,
598 gigaset_modem_fill, (unsigned long) cs);
599
600 return 0;
601 }
602
603 /* Send data from current skb to the device. */
write_modem(struct cardstate * cs)604 static int write_modem(struct cardstate *cs)
605 {
606 int ret = 0;
607 int count;
608 struct bc_state *bcs = &cs->bcs[0]; /* only one channel */
609 struct usb_cardstate *ucs = cs->hw.usb;
610 unsigned long flags;
611
612 gig_dbg(DEBUG_OUTPUT, "len: %d...", bcs->tx_skb->len);
613
614 if (!bcs->tx_skb->len) {
615 dev_kfree_skb_any(bcs->tx_skb);
616 bcs->tx_skb = NULL;
617 return -EINVAL;
618 }
619
620 /* Copy data to bulk out buffer and transmit data */
621 count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
622 skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
623 skb_pull(bcs->tx_skb, count);
624 ucs->busy = 1;
625 gig_dbg(DEBUG_OUTPUT, "write_modem: send %d bytes", count);
626
627 spin_lock_irqsave(&cs->lock, flags);
628 if (cs->connected) {
629 usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
630 usb_sndbulkpipe(ucs->udev,
631 ucs->bulk_out_endpointAddr &
632 0x0f),
633 ucs->bulk_out_buffer, count,
634 gigaset_write_bulk_callback, cs);
635 ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
636 } else {
637 ret = -ENODEV;
638 }
639 spin_unlock_irqrestore(&cs->lock, flags);
640
641 if (ret) {
642 dev_err(cs->dev, "could not submit urb (error %d)\n", -ret);
643 ucs->busy = 0;
644 }
645
646 if (!bcs->tx_skb->len) {
647 /* skb sent completely */
648 gigaset_skb_sent(bcs, bcs->tx_skb);
649
650 gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
651 (unsigned long) bcs->tx_skb);
652 dev_kfree_skb_any(bcs->tx_skb);
653 bcs->tx_skb = NULL;
654 }
655
656 return ret;
657 }
658
gigaset_probe(struct usb_interface * interface,const struct usb_device_id * id)659 static int gigaset_probe(struct usb_interface *interface,
660 const struct usb_device_id *id)
661 {
662 int retval;
663 struct usb_device *udev = interface_to_usbdev(interface);
664 struct usb_host_interface *hostif = interface->cur_altsetting;
665 struct cardstate *cs = NULL;
666 struct usb_cardstate *ucs = NULL;
667 struct usb_endpoint_descriptor *endpoint;
668 int buffer_size;
669
670 gig_dbg(DEBUG_ANY, "%s: Check if device matches ...", __func__);
671
672 /* See if the device offered us matches what we can accept */
673 if ((le16_to_cpu(udev->descriptor.idVendor) != USB_M105_VENDOR_ID) ||
674 (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID)) {
675 gig_dbg(DEBUG_ANY, "device ID (0x%x, 0x%x) not for me - skip",
676 le16_to_cpu(udev->descriptor.idVendor),
677 le16_to_cpu(udev->descriptor.idProduct));
678 return -ENODEV;
679 }
680 if (hostif->desc.bInterfaceNumber != 0) {
681 gig_dbg(DEBUG_ANY, "interface %d not for me - skip",
682 hostif->desc.bInterfaceNumber);
683 return -ENODEV;
684 }
685 if (hostif->desc.bAlternateSetting != 0) {
686 dev_notice(&udev->dev, "unsupported altsetting %d - skip",
687 hostif->desc.bAlternateSetting);
688 return -ENODEV;
689 }
690 if (hostif->desc.bInterfaceClass != 255) {
691 dev_notice(&udev->dev, "unsupported interface class %d - skip",
692 hostif->desc.bInterfaceClass);
693 return -ENODEV;
694 }
695
696 dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
697
698 /* allocate memory for our device state and initialize it */
699 cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
700 if (!cs)
701 return -ENODEV;
702 ucs = cs->hw.usb;
703
704 /* save off device structure ptrs for later use */
705 usb_get_dev(udev);
706 ucs->udev = udev;
707 ucs->interface = interface;
708 cs->dev = &interface->dev;
709
710 /* save address of controller structure */
711 usb_set_intfdata(interface, cs);
712
713 endpoint = &hostif->endpoint[0].desc;
714
715 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
716 ucs->bulk_out_size = buffer_size;
717 ucs->bulk_out_endpointAddr = endpoint->bEndpointAddress;
718 ucs->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
719 if (!ucs->bulk_out_buffer) {
720 dev_err(cs->dev, "Couldn't allocate bulk_out_buffer\n");
721 retval = -ENOMEM;
722 goto error;
723 }
724
725 ucs->bulk_out_urb = usb_alloc_urb(0, GFP_KERNEL);
726 if (!ucs->bulk_out_urb) {
727 dev_err(cs->dev, "Couldn't allocate bulk_out_urb\n");
728 retval = -ENOMEM;
729 goto error;
730 }
731
732 endpoint = &hostif->endpoint[1].desc;
733
734 ucs->busy = 0;
735
736 ucs->read_urb = usb_alloc_urb(0, GFP_KERNEL);
737 if (!ucs->read_urb) {
738 dev_err(cs->dev, "No free urbs available\n");
739 retval = -ENOMEM;
740 goto error;
741 }
742 buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
743 ucs->rcvbuf_size = buffer_size;
744 ucs->int_in_endpointAddr = endpoint->bEndpointAddress;
745 ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
746 if (!ucs->rcvbuf) {
747 dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
748 retval = -ENOMEM;
749 goto error;
750 }
751 /* Fill the interrupt urb and send it to the core */
752 usb_fill_int_urb(ucs->read_urb, udev,
753 usb_rcvintpipe(udev,
754 endpoint->bEndpointAddress & 0x0f),
755 ucs->rcvbuf, buffer_size,
756 gigaset_read_int_callback,
757 cs, endpoint->bInterval);
758
759 retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
760 if (retval) {
761 dev_err(cs->dev, "Could not submit URB (error %d)\n", -retval);
762 goto error;
763 }
764
765 /* tell common part that the device is ready */
766 if (startmode == SM_LOCKED)
767 cs->mstate = MS_LOCKED;
768
769 retval = gigaset_start(cs);
770 if (retval < 0) {
771 tasklet_kill(&cs->write_tasklet);
772 goto error;
773 }
774 return 0;
775
776 error:
777 usb_kill_urb(ucs->read_urb);
778 kfree(ucs->bulk_out_buffer);
779 usb_free_urb(ucs->bulk_out_urb);
780 kfree(ucs->rcvbuf);
781 usb_free_urb(ucs->read_urb);
782 usb_set_intfdata(interface, NULL);
783 ucs->read_urb = ucs->bulk_out_urb = NULL;
784 ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
785 usb_put_dev(ucs->udev);
786 ucs->udev = NULL;
787 ucs->interface = NULL;
788 gigaset_freecs(cs);
789 return retval;
790 }
791
gigaset_disconnect(struct usb_interface * interface)792 static void gigaset_disconnect(struct usb_interface *interface)
793 {
794 struct cardstate *cs;
795 struct usb_cardstate *ucs;
796
797 cs = usb_get_intfdata(interface);
798 ucs = cs->hw.usb;
799
800 dev_info(cs->dev, "disconnecting Gigaset USB adapter\n");
801
802 usb_kill_urb(ucs->read_urb);
803
804 gigaset_stop(cs);
805
806 usb_set_intfdata(interface, NULL);
807 tasklet_kill(&cs->write_tasklet);
808
809 usb_kill_urb(ucs->bulk_out_urb);
810
811 kfree(ucs->bulk_out_buffer);
812 usb_free_urb(ucs->bulk_out_urb);
813 kfree(ucs->rcvbuf);
814 usb_free_urb(ucs->read_urb);
815 ucs->read_urb = ucs->bulk_out_urb = NULL;
816 ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
817
818 usb_put_dev(ucs->udev);
819 ucs->interface = NULL;
820 ucs->udev = NULL;
821 cs->dev = NULL;
822 gigaset_freecs(cs);
823 }
824
825 /* gigaset_suspend
826 * This function is called before the USB connection is suspended or reset.
827 */
gigaset_suspend(struct usb_interface * intf,pm_message_t message)828 static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
829 {
830 struct cardstate *cs = usb_get_intfdata(intf);
831
832 /* stop activity */
833 cs->connected = 0; /* prevent rescheduling */
834 usb_kill_urb(cs->hw.usb->read_urb);
835 tasklet_kill(&cs->write_tasklet);
836 usb_kill_urb(cs->hw.usb->bulk_out_urb);
837
838 gig_dbg(DEBUG_SUSPEND, "suspend complete");
839 return 0;
840 }
841
842 /* gigaset_resume
843 * This function is called after the USB connection has been resumed or reset.
844 */
gigaset_resume(struct usb_interface * intf)845 static int gigaset_resume(struct usb_interface *intf)
846 {
847 struct cardstate *cs = usb_get_intfdata(intf);
848 int rc;
849
850 /* resubmit interrupt URB */
851 cs->connected = 1;
852 rc = usb_submit_urb(cs->hw.usb->read_urb, GFP_KERNEL);
853 if (rc) {
854 dev_err(cs->dev, "Could not submit read URB (error %d)\n", -rc);
855 return rc;
856 }
857
858 gig_dbg(DEBUG_SUSPEND, "resume complete");
859 return 0;
860 }
861
862 /* gigaset_pre_reset
863 * This function is called before the USB connection is reset.
864 */
gigaset_pre_reset(struct usb_interface * intf)865 static int gigaset_pre_reset(struct usb_interface *intf)
866 {
867 /* same as suspend */
868 return gigaset_suspend(intf, PMSG_ON);
869 }
870
871 static const struct gigaset_ops ops = {
872 gigaset_write_cmd,
873 gigaset_write_room,
874 gigaset_chars_in_buffer,
875 gigaset_brkchars,
876 gigaset_init_bchannel,
877 gigaset_close_bchannel,
878 gigaset_initbcshw,
879 gigaset_freebcshw,
880 gigaset_reinitbcshw,
881 gigaset_initcshw,
882 gigaset_freecshw,
883 gigaset_set_modem_ctrl,
884 gigaset_baud_rate,
885 gigaset_set_line_ctrl,
886 gigaset_m10x_send_skb,
887 gigaset_m10x_input,
888 };
889
890 /*
891 * This function is called while kernel-module is loaded
892 */
usb_gigaset_init(void)893 static int __init usb_gigaset_init(void)
894 {
895 int result;
896
897 /* allocate memory for our driver state and initialize it */
898 driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
899 GIGASET_MODULENAME, GIGASET_DEVNAME,
900 &ops, THIS_MODULE);
901 if (driver == NULL) {
902 result = -ENOMEM;
903 goto error;
904 }
905
906 /* register this driver with the USB subsystem */
907 result = usb_register(&gigaset_usb_driver);
908 if (result < 0) {
909 pr_err("error %d registering USB driver\n", -result);
910 goto error;
911 }
912
913 pr_info(DRIVER_DESC "\n");
914 return 0;
915
916 error:
917 if (driver)
918 gigaset_freedriver(driver);
919 driver = NULL;
920 return result;
921 }
922
923 /*
924 * This function is called while unloading the kernel-module
925 */
usb_gigaset_exit(void)926 static void __exit usb_gigaset_exit(void)
927 {
928 int i;
929
930 gigaset_blockdriver(driver); /* => probe will fail
931 * => no gigaset_start any more
932 */
933
934 /* stop all connected devices */
935 for (i = 0; i < driver->minors; i++)
936 gigaset_shutdown(driver->cs + i);
937
938 /* from now on, no isdn callback should be possible */
939
940 /* deregister this driver with the USB subsystem */
941 usb_deregister(&gigaset_usb_driver);
942 /* this will call the disconnect-callback */
943 /* from now on, no disconnect/probe callback should be running */
944
945 gigaset_freedriver(driver);
946 driver = NULL;
947 }
948
949
950 module_init(usb_gigaset_init);
951 module_exit(usb_gigaset_exit);
952
953 MODULE_AUTHOR(DRIVER_AUTHOR);
954 MODULE_DESCRIPTION(DRIVER_DESC);
955
956 MODULE_LICENSE("GPL");
957