1 /*
2 * drivers/net/phy/qsemi.c
3 *
4 * Driver for Quality Semiconductor PHYs
5 *
6 * Author: Andy Fleming
7 *
8 * Copyright (c) 2004 Freescale Semiconductor, Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 */
16 #include <linux/kernel.h>
17 #include <linux/string.h>
18 #include <linux/errno.h>
19 #include <linux/unistd.h>
20 #include <linux/interrupt.h>
21 #include <linux/init.h>
22 #include <linux/delay.h>
23 #include <linux/netdevice.h>
24 #include <linux/etherdevice.h>
25 #include <linux/skbuff.h>
26 #include <linux/spinlock.h>
27 #include <linux/mm.h>
28 #include <linux/module.h>
29 #include <linux/mii.h>
30 #include <linux/ethtool.h>
31 #include <linux/phy.h>
32
33 #include <asm/io.h>
34 #include <asm/irq.h>
35 #include <asm/uaccess.h>
36
37 /* ------------------------------------------------------------------------- */
38 /* The Quality Semiconductor QS6612 is used on the RPX CLLF */
39
40 /* register definitions */
41
42 #define MII_QS6612_MCR 17 /* Mode Control Register */
43 #define MII_QS6612_FTR 27 /* Factory Test Register */
44 #define MII_QS6612_MCO 28 /* Misc. Control Register */
45 #define MII_QS6612_ISR 29 /* Interrupt Source Register */
46 #define MII_QS6612_IMR 30 /* Interrupt Mask Register */
47 #define MII_QS6612_IMR_INIT 0x003a
48 #define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
49
50 #define QS6612_PCR_AN_COMPLETE 0x1000
51 #define QS6612_PCR_RLBEN 0x0200
52 #define QS6612_PCR_DCREN 0x0100
53 #define QS6612_PCR_4B5BEN 0x0040
54 #define QS6612_PCR_TX_ISOLATE 0x0020
55 #define QS6612_PCR_MLT3_DIS 0x0002
56 #define QS6612_PCR_SCRM_DESCRM 0x0001
57
58 MODULE_DESCRIPTION("Quality Semiconductor PHY driver");
59 MODULE_AUTHOR("Andy Fleming");
60 MODULE_LICENSE("GPL");
61
62 /* Returns 0, unless there's a write error */
qs6612_config_init(struct phy_device * phydev)63 static int qs6612_config_init(struct phy_device *phydev)
64 {
65 /* The PHY powers up isolated on the RPX,
66 * so send a command to allow operation.
67 * XXX - My docs indicate this should be 0x0940
68 * ...or something. The current value sets three
69 * reserved bits, bit 11, which specifies it should be
70 * set to one, bit 10, which specifies it should be set
71 * to 0, and bit 7, which doesn't specify. However, my
72 * docs are preliminary, and I will leave it like this
73 * until someone more knowledgable corrects me or it.
74 * -- Andy Fleming
75 */
76 return phy_write(phydev, MII_QS6612_PCR, 0x0dc0);
77 }
78
qs6612_ack_interrupt(struct phy_device * phydev)79 static int qs6612_ack_interrupt(struct phy_device *phydev)
80 {
81 int err;
82
83 err = phy_read(phydev, MII_QS6612_ISR);
84
85 if (err < 0)
86 return err;
87
88 err = phy_read(phydev, MII_BMSR);
89
90 if (err < 0)
91 return err;
92
93 err = phy_read(phydev, MII_EXPANSION);
94
95 if (err < 0)
96 return err;
97
98 return 0;
99 }
100
qs6612_config_intr(struct phy_device * phydev)101 static int qs6612_config_intr(struct phy_device *phydev)
102 {
103 int err;
104 if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
105 err = phy_write(phydev, MII_QS6612_IMR,
106 MII_QS6612_IMR_INIT);
107 else
108 err = phy_write(phydev, MII_QS6612_IMR, 0);
109
110 return err;
111
112 }
113
114 static struct phy_driver qs6612_driver = {
115 .phy_id = 0x00181440,
116 .name = "QS6612",
117 .phy_id_mask = 0xfffffff0,
118 .features = PHY_BASIC_FEATURES,
119 .flags = PHY_HAS_INTERRUPT,
120 .config_init = qs6612_config_init,
121 .config_aneg = genphy_config_aneg,
122 .read_status = genphy_read_status,
123 .ack_interrupt = qs6612_ack_interrupt,
124 .config_intr = qs6612_config_intr,
125 .driver = { .owner = THIS_MODULE,},
126 };
127
qs6612_init(void)128 static int __init qs6612_init(void)
129 {
130 return phy_driver_register(&qs6612_driver);
131 }
132
qs6612_exit(void)133 static void __exit qs6612_exit(void)
134 {
135 phy_driver_unregister(&qs6612_driver);
136 }
137
138 module_init(qs6612_init);
139 module_exit(qs6612_exit);
140
141 static struct mdio_device_id __maybe_unused qs6612_tbl[] = {
142 { 0x00181440, 0xfffffff0 },
143 { }
144 };
145
146 MODULE_DEVICE_TABLE(mdio, qs6612_tbl);
147