1 /*
2 * Driver for KS8695 serial ports
3 *
4 * Based on drivers/serial/serial_amba.c, by Kam Lee.
5 *
6 * Copyright 2002-2005 Micrel Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 */
14 #include <linux/module.h>
15 #include <linux/tty.h>
16 #include <linux/tty_flip.h>
17 #include <linux/ioport.h>
18 #include <linux/init.h>
19 #include <linux/serial.h>
20 #include <linux/console.h>
21 #include <linux/sysrq.h>
22 #include <linux/device.h>
23
24 #include <asm/io.h>
25 #include <asm/irq.h>
26 #include <asm/mach/irq.h>
27
28 #include <mach/regs-uart.h>
29 #include <mach/regs-irq.h>
30
31 #if defined(CONFIG_SERIAL_KS8695_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
32 #define SUPPORT_SYSRQ
33 #endif
34
35 #include <linux/serial_core.h>
36
37
38 #define SERIAL_KS8695_MAJOR 204
39 #define SERIAL_KS8695_MINOR 16
40 #define SERIAL_KS8695_DEVNAME "ttyAM"
41
42 #define SERIAL_KS8695_NR 1
43
44 /*
45 * Access macros for the KS8695 UART
46 */
47 #define UART_GET_CHAR(p) (__raw_readl((p)->membase + KS8695_URRB) & 0xFF)
48 #define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + KS8695_URTH)
49 #define UART_GET_FCR(p) __raw_readl((p)->membase + KS8695_URFC)
50 #define UART_PUT_FCR(p, c) __raw_writel((c), (p)->membase + KS8695_URFC)
51 #define UART_GET_MSR(p) __raw_readl((p)->membase + KS8695_URMS)
52 #define UART_GET_LSR(p) __raw_readl((p)->membase + KS8695_URLS)
53 #define UART_GET_LCR(p) __raw_readl((p)->membase + KS8695_URLC)
54 #define UART_PUT_LCR(p, c) __raw_writel((c), (p)->membase + KS8695_URLC)
55 #define UART_GET_MCR(p) __raw_readl((p)->membase + KS8695_URMC)
56 #define UART_PUT_MCR(p, c) __raw_writel((c), (p)->membase + KS8695_URMC)
57 #define UART_GET_BRDR(p) __raw_readl((p)->membase + KS8695_URBD)
58 #define UART_PUT_BRDR(p, c) __raw_writel((c), (p)->membase + KS8695_URBD)
59
60 #define KS8695_CLR_TX_INT() __raw_writel(1 << KS8695_IRQ_UART_TX, KS8695_IRQ_VA + KS8695_INTST)
61
62 #define UART_DUMMY_LSR_RX 0x100
63 #define UART_PORT_SIZE (KS8695_USR - KS8695_URRB + 4)
64
tx_enabled(struct uart_port * port)65 static inline int tx_enabled(struct uart_port *port)
66 {
67 return port->unused[0] & 1;
68 }
69
rx_enabled(struct uart_port * port)70 static inline int rx_enabled(struct uart_port *port)
71 {
72 return port->unused[0] & 2;
73 }
74
ms_enabled(struct uart_port * port)75 static inline int ms_enabled(struct uart_port *port)
76 {
77 return port->unused[0] & 4;
78 }
79
ms_enable(struct uart_port * port,int enabled)80 static inline void ms_enable(struct uart_port *port, int enabled)
81 {
82 if(enabled)
83 port->unused[0] |= 4;
84 else
85 port->unused[0] &= ~4;
86 }
87
rx_enable(struct uart_port * port,int enabled)88 static inline void rx_enable(struct uart_port *port, int enabled)
89 {
90 if(enabled)
91 port->unused[0] |= 2;
92 else
93 port->unused[0] &= ~2;
94 }
95
tx_enable(struct uart_port * port,int enabled)96 static inline void tx_enable(struct uart_port *port, int enabled)
97 {
98 if(enabled)
99 port->unused[0] |= 1;
100 else
101 port->unused[0] &= ~1;
102 }
103
104
105 #ifdef SUPPORT_SYSRQ
106 static struct console ks8695_console;
107 #endif
108
ks8695uart_stop_tx(struct uart_port * port)109 static void ks8695uart_stop_tx(struct uart_port *port)
110 {
111 if (tx_enabled(port)) {
112 /* use disable_irq_nosync() and not disable_irq() to avoid self
113 * imposed deadlock by not waiting for irq handler to end,
114 * since this ks8695uart_stop_tx() is called from interrupt context.
115 */
116 disable_irq_nosync(KS8695_IRQ_UART_TX);
117 tx_enable(port, 0);
118 }
119 }
120
ks8695uart_start_tx(struct uart_port * port)121 static void ks8695uart_start_tx(struct uart_port *port)
122 {
123 if (!tx_enabled(port)) {
124 enable_irq(KS8695_IRQ_UART_TX);
125 tx_enable(port, 1);
126 }
127 }
128
ks8695uart_stop_rx(struct uart_port * port)129 static void ks8695uart_stop_rx(struct uart_port *port)
130 {
131 if (rx_enabled(port)) {
132 disable_irq(KS8695_IRQ_UART_RX);
133 rx_enable(port, 0);
134 }
135 }
136
ks8695uart_enable_ms(struct uart_port * port)137 static void ks8695uart_enable_ms(struct uart_port *port)
138 {
139 if (!ms_enabled(port)) {
140 enable_irq(KS8695_IRQ_UART_MODEM_STATUS);
141 ms_enable(port,1);
142 }
143 }
144
ks8695uart_disable_ms(struct uart_port * port)145 static void ks8695uart_disable_ms(struct uart_port *port)
146 {
147 if (ms_enabled(port)) {
148 disable_irq(KS8695_IRQ_UART_MODEM_STATUS);
149 ms_enable(port,0);
150 }
151 }
152
ks8695uart_rx_chars(int irq,void * dev_id)153 static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
154 {
155 struct uart_port *port = dev_id;
156 unsigned int status, ch, lsr, flg, max_count = 256;
157
158 status = UART_GET_LSR(port); /* clears pending LSR interrupts */
159 while ((status & URLS_URDR) && max_count--) {
160 ch = UART_GET_CHAR(port);
161 flg = TTY_NORMAL;
162
163 port->icount.rx++;
164
165 /*
166 * Note that the error handling code is
167 * out of the main execution path
168 */
169 lsr = UART_GET_LSR(port) | UART_DUMMY_LSR_RX;
170 if (unlikely(lsr & (URLS_URBI | URLS_URPE | URLS_URFE | URLS_URROE))) {
171 if (lsr & URLS_URBI) {
172 lsr &= ~(URLS_URFE | URLS_URPE);
173 port->icount.brk++;
174 if (uart_handle_break(port))
175 goto ignore_char;
176 }
177 if (lsr & URLS_URPE)
178 port->icount.parity++;
179 if (lsr & URLS_URFE)
180 port->icount.frame++;
181 if (lsr & URLS_URROE)
182 port->icount.overrun++;
183
184 lsr &= port->read_status_mask;
185
186 if (lsr & URLS_URBI)
187 flg = TTY_BREAK;
188 else if (lsr & URLS_URPE)
189 flg = TTY_PARITY;
190 else if (lsr & URLS_URFE)
191 flg = TTY_FRAME;
192 }
193
194 if (uart_handle_sysrq_char(port, ch))
195 goto ignore_char;
196
197 uart_insert_char(port, lsr, URLS_URROE, ch, flg);
198
199 ignore_char:
200 status = UART_GET_LSR(port);
201 }
202 tty_flip_buffer_push(&port->state->port);
203
204 return IRQ_HANDLED;
205 }
206
207
ks8695uart_tx_chars(int irq,void * dev_id)208 static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
209 {
210 struct uart_port *port = dev_id;
211 struct circ_buf *xmit = &port->state->xmit;
212 unsigned int count;
213
214 if (port->x_char) {
215 KS8695_CLR_TX_INT();
216 UART_PUT_CHAR(port, port->x_char);
217 port->icount.tx++;
218 port->x_char = 0;
219 return IRQ_HANDLED;
220 }
221
222 if (uart_tx_stopped(port) || uart_circ_empty(xmit)) {
223 ks8695uart_stop_tx(port);
224 return IRQ_HANDLED;
225 }
226
227 count = 16; /* fifo size */
228 while (!uart_circ_empty(xmit) && (count-- > 0)) {
229 KS8695_CLR_TX_INT();
230 UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
231
232 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
233 port->icount.tx++;
234 }
235
236 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
237 uart_write_wakeup(port);
238
239 if (uart_circ_empty(xmit))
240 ks8695uart_stop_tx(port);
241
242 return IRQ_HANDLED;
243 }
244
ks8695uart_modem_status(int irq,void * dev_id)245 static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
246 {
247 struct uart_port *port = dev_id;
248 unsigned int status;
249
250 /*
251 * clear modem interrupt by reading MSR
252 */
253 status = UART_GET_MSR(port);
254
255 if (status & URMS_URDDCD)
256 uart_handle_dcd_change(port, status & URMS_URDDCD);
257
258 if (status & URMS_URDDST)
259 port->icount.dsr++;
260
261 if (status & URMS_URDCTS)
262 uart_handle_cts_change(port, status & URMS_URDCTS);
263
264 if (status & URMS_URTERI)
265 port->icount.rng++;
266
267 wake_up_interruptible(&port->state->port.delta_msr_wait);
268
269 return IRQ_HANDLED;
270 }
271
ks8695uart_tx_empty(struct uart_port * port)272 static unsigned int ks8695uart_tx_empty(struct uart_port *port)
273 {
274 return (UART_GET_LSR(port) & URLS_URTE) ? TIOCSER_TEMT : 0;
275 }
276
ks8695uart_get_mctrl(struct uart_port * port)277 static unsigned int ks8695uart_get_mctrl(struct uart_port *port)
278 {
279 unsigned int result = 0;
280 unsigned int status;
281
282 status = UART_GET_MSR(port);
283 if (status & URMS_URDCD)
284 result |= TIOCM_CAR;
285 if (status & URMS_URDSR)
286 result |= TIOCM_DSR;
287 if (status & URMS_URCTS)
288 result |= TIOCM_CTS;
289 if (status & URMS_URRI)
290 result |= TIOCM_RI;
291
292 return result;
293 }
294
ks8695uart_set_mctrl(struct uart_port * port,u_int mctrl)295 static void ks8695uart_set_mctrl(struct uart_port *port, u_int mctrl)
296 {
297 unsigned int mcr;
298
299 mcr = UART_GET_MCR(port);
300 if (mctrl & TIOCM_RTS)
301 mcr |= URMC_URRTS;
302 else
303 mcr &= ~URMC_URRTS;
304
305 if (mctrl & TIOCM_DTR)
306 mcr |= URMC_URDTR;
307 else
308 mcr &= ~URMC_URDTR;
309
310 UART_PUT_MCR(port, mcr);
311 }
312
ks8695uart_break_ctl(struct uart_port * port,int break_state)313 static void ks8695uart_break_ctl(struct uart_port *port, int break_state)
314 {
315 unsigned int lcr;
316
317 lcr = UART_GET_LCR(port);
318
319 if (break_state == -1)
320 lcr |= URLC_URSBC;
321 else
322 lcr &= ~URLC_URSBC;
323
324 UART_PUT_LCR(port, lcr);
325 }
326
ks8695uart_startup(struct uart_port * port)327 static int ks8695uart_startup(struct uart_port *port)
328 {
329 int retval;
330
331 set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
332 tx_enable(port, 0);
333 rx_enable(port, 1);
334 ms_enable(port, 1);
335
336 /*
337 * Allocate the IRQ
338 */
339 retval = request_irq(KS8695_IRQ_UART_TX, ks8695uart_tx_chars, 0, "UART TX", port);
340 if (retval)
341 goto err_tx;
342
343 retval = request_irq(KS8695_IRQ_UART_RX, ks8695uart_rx_chars, 0, "UART RX", port);
344 if (retval)
345 goto err_rx;
346
347 retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, 0, "UART LineStatus", port);
348 if (retval)
349 goto err_ls;
350
351 retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, 0, "UART ModemStatus", port);
352 if (retval)
353 goto err_ms;
354
355 return 0;
356
357 err_ms:
358 free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
359 err_ls:
360 free_irq(KS8695_IRQ_UART_RX, port);
361 err_rx:
362 free_irq(KS8695_IRQ_UART_TX, port);
363 err_tx:
364 return retval;
365 }
366
ks8695uart_shutdown(struct uart_port * port)367 static void ks8695uart_shutdown(struct uart_port *port)
368 {
369 /*
370 * Free the interrupt
371 */
372 free_irq(KS8695_IRQ_UART_RX, port);
373 free_irq(KS8695_IRQ_UART_TX, port);
374 free_irq(KS8695_IRQ_UART_MODEM_STATUS, port);
375 free_irq(KS8695_IRQ_UART_LINE_STATUS, port);
376
377 /* disable break condition and fifos */
378 UART_PUT_LCR(port, UART_GET_LCR(port) & ~URLC_URSBC);
379 UART_PUT_FCR(port, UART_GET_FCR(port) & ~URFC_URFE);
380 }
381
ks8695uart_set_termios(struct uart_port * port,struct ktermios * termios,struct ktermios * old)382 static void ks8695uart_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old)
383 {
384 unsigned int lcr, fcr = 0;
385 unsigned long flags;
386 unsigned int baud, quot;
387
388 /*
389 * Ask the core to calculate the divisor for us.
390 */
391 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
392 quot = uart_get_divisor(port, baud);
393
394 switch (termios->c_cflag & CSIZE) {
395 case CS5:
396 lcr = URCL_5;
397 break;
398 case CS6:
399 lcr = URCL_6;
400 break;
401 case CS7:
402 lcr = URCL_7;
403 break;
404 default:
405 lcr = URCL_8;
406 break;
407 }
408
409 /* stop bits */
410 if (termios->c_cflag & CSTOPB)
411 lcr |= URLC_URSB;
412
413 /* parity */
414 if (termios->c_cflag & PARENB) {
415 if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */
416 if (termios->c_cflag & PARODD)
417 lcr |= URPE_MARK;
418 else
419 lcr |= URPE_SPACE;
420 }
421 else if (termios->c_cflag & PARODD)
422 lcr |= URPE_ODD;
423 else
424 lcr |= URPE_EVEN;
425 }
426
427 if (port->fifosize > 1)
428 fcr = URFC_URFRT_8 | URFC_URTFR | URFC_URRFR | URFC_URFE;
429
430 spin_lock_irqsave(&port->lock, flags);
431
432 /*
433 * Update the per-port timeout.
434 */
435 uart_update_timeout(port, termios->c_cflag, baud);
436
437 port->read_status_mask = URLS_URROE;
438 if (termios->c_iflag & INPCK)
439 port->read_status_mask |= (URLS_URFE | URLS_URPE);
440 if (termios->c_iflag & (BRKINT | PARMRK))
441 port->read_status_mask |= URLS_URBI;
442
443 /*
444 * Characters to ignore
445 */
446 port->ignore_status_mask = 0;
447 if (termios->c_iflag & IGNPAR)
448 port->ignore_status_mask |= (URLS_URFE | URLS_URPE);
449 if (termios->c_iflag & IGNBRK) {
450 port->ignore_status_mask |= URLS_URBI;
451 /*
452 * If we're ignoring parity and break indicators,
453 * ignore overruns too (for real raw support).
454 */
455 if (termios->c_iflag & IGNPAR)
456 port->ignore_status_mask |= URLS_URROE;
457 }
458
459 /*
460 * Ignore all characters if CREAD is not set.
461 */
462 if ((termios->c_cflag & CREAD) == 0)
463 port->ignore_status_mask |= UART_DUMMY_LSR_RX;
464
465 /* first, disable everything */
466 if (UART_ENABLE_MS(port, termios->c_cflag))
467 ks8695uart_enable_ms(port);
468 else
469 ks8695uart_disable_ms(port);
470
471 /* Set baud rate */
472 UART_PUT_BRDR(port, quot);
473
474 UART_PUT_LCR(port, lcr);
475 UART_PUT_FCR(port, fcr);
476
477 spin_unlock_irqrestore(&port->lock, flags);
478 }
479
ks8695uart_type(struct uart_port * port)480 static const char *ks8695uart_type(struct uart_port *port)
481 {
482 return port->type == PORT_KS8695 ? "KS8695" : NULL;
483 }
484
485 /*
486 * Release the memory region(s) being used by 'port'
487 */
ks8695uart_release_port(struct uart_port * port)488 static void ks8695uart_release_port(struct uart_port *port)
489 {
490 release_mem_region(port->mapbase, UART_PORT_SIZE);
491 }
492
493 /*
494 * Request the memory region(s) being used by 'port'
495 */
ks8695uart_request_port(struct uart_port * port)496 static int ks8695uart_request_port(struct uart_port *port)
497 {
498 return request_mem_region(port->mapbase, UART_PORT_SIZE,
499 "serial_ks8695") != NULL ? 0 : -EBUSY;
500 }
501
502 /*
503 * Configure/autoconfigure the port.
504 */
ks8695uart_config_port(struct uart_port * port,int flags)505 static void ks8695uart_config_port(struct uart_port *port, int flags)
506 {
507 if (flags & UART_CONFIG_TYPE) {
508 port->type = PORT_KS8695;
509 ks8695uart_request_port(port);
510 }
511 }
512
513 /*
514 * verify the new serial_struct (for TIOCSSERIAL).
515 */
ks8695uart_verify_port(struct uart_port * port,struct serial_struct * ser)516 static int ks8695uart_verify_port(struct uart_port *port, struct serial_struct *ser)
517 {
518 int ret = 0;
519
520 if (ser->type != PORT_UNKNOWN && ser->type != PORT_KS8695)
521 ret = -EINVAL;
522 if (ser->irq != port->irq)
523 ret = -EINVAL;
524 if (ser->baud_base < 9600)
525 ret = -EINVAL;
526 return ret;
527 }
528
529 static struct uart_ops ks8695uart_pops = {
530 .tx_empty = ks8695uart_tx_empty,
531 .set_mctrl = ks8695uart_set_mctrl,
532 .get_mctrl = ks8695uart_get_mctrl,
533 .stop_tx = ks8695uart_stop_tx,
534 .start_tx = ks8695uart_start_tx,
535 .stop_rx = ks8695uart_stop_rx,
536 .enable_ms = ks8695uart_enable_ms,
537 .break_ctl = ks8695uart_break_ctl,
538 .startup = ks8695uart_startup,
539 .shutdown = ks8695uart_shutdown,
540 .set_termios = ks8695uart_set_termios,
541 .type = ks8695uart_type,
542 .release_port = ks8695uart_release_port,
543 .request_port = ks8695uart_request_port,
544 .config_port = ks8695uart_config_port,
545 .verify_port = ks8695uart_verify_port,
546 };
547
548 static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
549 {
550 .membase = KS8695_UART_VA,
551 .mapbase = KS8695_UART_PA,
552 .iotype = SERIAL_IO_MEM,
553 .irq = KS8695_IRQ_UART_TX,
554 .uartclk = KS8695_CLOCK_RATE * 16,
555 .fifosize = 16,
556 .ops = &ks8695uart_pops,
557 .flags = ASYNC_BOOT_AUTOCONF,
558 .line = 0,
559 }
560 };
561
562 #ifdef CONFIG_SERIAL_KS8695_CONSOLE
ks8695_console_putchar(struct uart_port * port,int ch)563 static void ks8695_console_putchar(struct uart_port *port, int ch)
564 {
565 while (!(UART_GET_LSR(port) & URLS_URTHRE))
566 barrier();
567
568 UART_PUT_CHAR(port, ch);
569 }
570
ks8695_console_write(struct console * co,const char * s,u_int count)571 static void ks8695_console_write(struct console *co, const char *s, u_int count)
572 {
573 struct uart_port *port = ks8695uart_ports + co->index;
574
575 uart_console_write(port, s, count, ks8695_console_putchar);
576 }
577
ks8695_console_get_options(struct uart_port * port,int * baud,int * parity,int * bits)578 static void __init ks8695_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
579 {
580 unsigned int lcr;
581
582 lcr = UART_GET_LCR(port);
583
584 switch (lcr & URLC_PARITY) {
585 case URPE_ODD:
586 *parity = 'o';
587 break;
588 case URPE_EVEN:
589 *parity = 'e';
590 break;
591 default:
592 *parity = 'n';
593 }
594
595 switch (lcr & URLC_URCL) {
596 case URCL_5:
597 *bits = 5;
598 break;
599 case URCL_6:
600 *bits = 6;
601 break;
602 case URCL_7:
603 *bits = 7;
604 break;
605 default:
606 *bits = 8;
607 }
608
609 *baud = port->uartclk / (UART_GET_BRDR(port) & 0x0FFF);
610 *baud /= 16;
611 *baud &= 0xFFFFFFF0;
612 }
613
ks8695_console_setup(struct console * co,char * options)614 static int __init ks8695_console_setup(struct console *co, char *options)
615 {
616 struct uart_port *port;
617 int baud = 115200;
618 int bits = 8;
619 int parity = 'n';
620 int flow = 'n';
621
622 /*
623 * Check whether an invalid uart number has been specified, and
624 * if so, search for the first available port that does have
625 * console support.
626 */
627 port = uart_get_console(ks8695uart_ports, SERIAL_KS8695_NR, co);
628
629 if (options)
630 uart_parse_options(options, &baud, &parity, &bits, &flow);
631 else
632 ks8695_console_get_options(port, &baud, &parity, &bits);
633
634 return uart_set_options(port, co, baud, parity, bits, flow);
635 }
636
637 static struct uart_driver ks8695_reg;
638
639 static struct console ks8695_console = {
640 .name = SERIAL_KS8695_DEVNAME,
641 .write = ks8695_console_write,
642 .device = uart_console_device,
643 .setup = ks8695_console_setup,
644 .flags = CON_PRINTBUFFER,
645 .index = -1,
646 .data = &ks8695_reg,
647 };
648
ks8695_console_init(void)649 static int __init ks8695_console_init(void)
650 {
651 add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
652 register_console(&ks8695_console);
653 return 0;
654 }
655
656 console_initcall(ks8695_console_init);
657
658 #define KS8695_CONSOLE &ks8695_console
659 #else
660 #define KS8695_CONSOLE NULL
661 #endif
662
663 static struct uart_driver ks8695_reg = {
664 .owner = THIS_MODULE,
665 .driver_name = "serial_ks8695",
666 .dev_name = SERIAL_KS8695_DEVNAME,
667 .major = SERIAL_KS8695_MAJOR,
668 .minor = SERIAL_KS8695_MINOR,
669 .nr = SERIAL_KS8695_NR,
670 .cons = KS8695_CONSOLE,
671 };
672
ks8695uart_init(void)673 static int __init ks8695uart_init(void)
674 {
675 int i, ret;
676
677 printk(KERN_INFO "Serial: Micrel KS8695 UART driver\n");
678
679 ret = uart_register_driver(&ks8695_reg);
680 if (ret)
681 return ret;
682
683 for (i = 0; i < SERIAL_KS8695_NR; i++)
684 uart_add_one_port(&ks8695_reg, &ks8695uart_ports[0]);
685
686 return 0;
687 }
688
ks8695uart_exit(void)689 static void __exit ks8695uart_exit(void)
690 {
691 int i;
692
693 for (i = 0; i < SERIAL_KS8695_NR; i++)
694 uart_remove_one_port(&ks8695_reg, &ks8695uart_ports[0]);
695 uart_unregister_driver(&ks8695_reg);
696 }
697
698 module_init(ks8695uart_init);
699 module_exit(ks8695uart_exit);
700
701 MODULE_DESCRIPTION("KS8695 serial port driver");
702 MODULE_AUTHOR("Micrel Inc.");
703 MODULE_LICENSE("GPL");
704