1 /*
2 * LCD Lowlevel Control Abstraction
3 *
4 * Copyright (C) 2003,2004 Hewlett-Packard Company
5 *
6 */
7
8 #ifndef _LINUX_LCD_H
9 #define _LINUX_LCD_H
10
11 #include <linux/device.h>
12 #include <linux/mutex.h>
13 #include <linux/notifier.h>
14 #include <linux/fb.h>
15
16 /* Notes on locking:
17 *
18 * lcd_device->ops_lock is an internal backlight lock protecting the ops
19 * field and no code outside the core should need to touch it.
20 *
21 * Access to set_power() is serialised by the update_lock mutex since
22 * most drivers seem to need this and historically get it wrong.
23 *
24 * Most drivers don't need locking on their get_power() method.
25 * If yours does, you need to implement it in the driver. You can use the
26 * update_lock mutex if appropriate.
27 *
28 * Any other use of the locks below is probably wrong.
29 */
30
31 struct lcd_device;
32 struct fb_info;
33
34 struct lcd_properties {
35 /* The maximum value for contrast (read-only) */
36 int max_contrast;
37 };
38
39 struct lcd_ops {
40 /* Get the LCD panel power status (0: full on, 1..3: controller
41 power on, flat panel power off, 4: full off), see FB_BLANK_XXX */
42 int (*get_power)(struct lcd_device *);
43 /*
44 * Enable or disable power to the LCD(0: on; 4: off, see FB_BLANK_XXX)
45 * and this callback would be called proir to fb driver's callback.
46 *
47 * P.S. note that if early_set_power is not NULL then early fb notifier
48 * would be registered.
49 */
50 int (*early_set_power)(struct lcd_device *, int power);
51 /* revert the effects of the early blank event. */
52 int (*r_early_set_power)(struct lcd_device *, int power);
53 /* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */
54 int (*set_power)(struct lcd_device *, int power);
55 /* Get the current contrast setting (0-max_contrast) */
56 int (*get_contrast)(struct lcd_device *);
57 /* Set LCD panel contrast */
58 int (*set_contrast)(struct lcd_device *, int contrast);
59 /* Set LCD panel mode (resolutions ...) */
60 int (*set_mode)(struct lcd_device *, struct fb_videomode *);
61 /* Check if given framebuffer device is the one LCD is bound to;
62 return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */
63 int (*check_fb)(struct lcd_device *, struct fb_info *);
64 };
65
66 struct lcd_device {
67 struct lcd_properties props;
68 /* This protects the 'ops' field. If 'ops' is NULL, the driver that
69 registered this device has been unloaded, and if class_get_devdata()
70 points to something in the body of that driver, it is also invalid. */
71 struct mutex ops_lock;
72 /* If this is NULL, the backing module is unloaded */
73 struct lcd_ops *ops;
74 /* Serialise access to set_power method */
75 struct mutex update_lock;
76 /* The framebuffer notifier block */
77 struct notifier_block fb_notif;
78
79 struct device dev;
80 };
81
82 struct lcd_platform_data {
83 /* reset lcd panel device. */
84 int (*reset)(struct lcd_device *ld);
85 /* on or off to lcd panel. if 'enable' is 0 then
86 lcd power off and 1, lcd power on. */
87 int (*power_on)(struct lcd_device *ld, int enable);
88
89 /* it indicates whether lcd panel was enabled
90 from bootloader or not. */
91 int lcd_enabled;
92 /* it means delay for stable time when it becomes low to high
93 or high to low that is dependent on whether reset gpio is
94 low active or high active. */
95 unsigned int reset_delay;
96 /* stable time needing to become lcd power on. */
97 unsigned int power_on_delay;
98 /* stable time needing to become lcd power off. */
99 unsigned int power_off_delay;
100
101 /* it could be used for any purpose. */
102 void *pdata;
103 };
104
lcd_set_power(struct lcd_device * ld,int power)105 static inline void lcd_set_power(struct lcd_device *ld, int power)
106 {
107 mutex_lock(&ld->update_lock);
108 if (ld->ops && ld->ops->set_power)
109 ld->ops->set_power(ld, power);
110 mutex_unlock(&ld->update_lock);
111 }
112
113 extern struct lcd_device *lcd_device_register(const char *name,
114 struct device *parent, void *devdata, struct lcd_ops *ops);
115 extern void lcd_device_unregister(struct lcd_device *ld);
116
117 #define to_lcd_device(obj) container_of(obj, struct lcd_device, dev)
118
lcd_get_data(struct lcd_device * ld_dev)119 static inline void * lcd_get_data(struct lcd_device *ld_dev)
120 {
121 return dev_get_drvdata(&ld_dev->dev);
122 }
123
124
125 #endif
126