1 /*
2 * linux/arch/alpha/kernel/sys_noritake.c
3 *
4 * Copyright (C) 1995 David A Rusling
5 * Copyright (C) 1996 Jay A Estabrook
6 * Copyright (C) 1998, 1999 Richard Henderson
7 *
8 * Code supporting the NORITAKE (AlphaServer 1000A),
9 * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
10 */
11
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/mm.h>
15 #include <linux/sched.h>
16 #include <linux/pci.h>
17 #include <linux/init.h>
18 #include <linux/bitops.h>
19
20 #include <asm/ptrace.h>
21 #include <asm/mce.h>
22 #include <asm/dma.h>
23 #include <asm/irq.h>
24 #include <asm/mmu_context.h>
25 #include <asm/io.h>
26 #include <asm/pgtable.h>
27 #include <asm/core_apecs.h>
28 #include <asm/core_cia.h>
29 #include <asm/tlbflush.h>
30
31 #include "proto.h"
32 #include "irq_impl.h"
33 #include "pci_impl.h"
34 #include "machvec_impl.h"
35
36 /* Note mask bit is true for ENABLED irqs. */
37 static int cached_irq_mask;
38
39 static inline void
noritake_update_irq_hw(int irq,int mask)40 noritake_update_irq_hw(int irq, int mask)
41 {
42 int port = 0x54a;
43 if (irq >= 32) {
44 mask >>= 16;
45 port = 0x54c;
46 }
47 outw(mask, port);
48 }
49
50 static void
noritake_enable_irq(struct irq_data * d)51 noritake_enable_irq(struct irq_data *d)
52 {
53 noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
54 }
55
56 static void
noritake_disable_irq(struct irq_data * d)57 noritake_disable_irq(struct irq_data *d)
58 {
59 noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
60 }
61
62 static struct irq_chip noritake_irq_type = {
63 .name = "NORITAKE",
64 .irq_unmask = noritake_enable_irq,
65 .irq_mask = noritake_disable_irq,
66 .irq_mask_ack = noritake_disable_irq,
67 };
68
69 static void
noritake_device_interrupt(unsigned long vector)70 noritake_device_interrupt(unsigned long vector)
71 {
72 unsigned long pld;
73 unsigned int i;
74
75 /* Read the interrupt summary registers of NORITAKE */
76 pld = (((unsigned long) inw(0x54c) << 32)
77 | ((unsigned long) inw(0x54a) << 16)
78 | ((unsigned long) inb(0xa0) << 8)
79 | inb(0x20));
80
81 /*
82 * Now for every possible bit set, work through them and call
83 * the appropriate interrupt handler.
84 */
85 while (pld) {
86 i = ffz(~pld);
87 pld &= pld - 1; /* clear least bit set */
88 if (i < 16) {
89 isa_device_interrupt(vector);
90 } else {
91 handle_irq(i);
92 }
93 }
94 }
95
96 static void
noritake_srm_device_interrupt(unsigned long vector)97 noritake_srm_device_interrupt(unsigned long vector)
98 {
99 int irq;
100
101 irq = (vector - 0x800) >> 4;
102
103 /*
104 * I really hate to do this, too, but the NORITAKE SRM console also
105 * reports PCI vectors *lower* than I expected from the bit numbers
106 * in the documentation.
107 * But I really don't want to change the fixup code for allocation
108 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
109 * look nice and clean now.
110 * So, here's this additional grotty hack... :-(
111 */
112 if (irq >= 16)
113 irq = irq + 1;
114
115 handle_irq(irq);
116 }
117
118 static void __init
noritake_init_irq(void)119 noritake_init_irq(void)
120 {
121 long i;
122
123 if (alpha_using_srm)
124 alpha_mv.device_interrupt = noritake_srm_device_interrupt;
125
126 outw(0, 0x54a);
127 outw(0, 0x54c);
128
129 for (i = 16; i < 48; ++i) {
130 irq_set_chip_and_handler(i, &noritake_irq_type,
131 handle_level_irq);
132 irq_set_status_flags(i, IRQ_LEVEL);
133 }
134
135 init_i8259a_irqs();
136 common_init_isa_dma();
137 }
138
139
140 /*
141 * PCI Fixup configuration.
142 *
143 * Summary @ 0x542, summary register #1:
144 * Bit Meaning
145 * 0 All valid ints from summary regs 2 & 3
146 * 1 QLOGIC ISP1020A SCSI
147 * 2 Interrupt Line A from slot 0
148 * 3 Interrupt Line B from slot 0
149 * 4 Interrupt Line A from slot 1
150 * 5 Interrupt line B from slot 1
151 * 6 Interrupt Line A from slot 2
152 * 7 Interrupt Line B from slot 2
153 * 8 Interrupt Line A from slot 3
154 * 9 Interrupt Line B from slot 3
155 *10 Interrupt Line A from slot 4
156 *11 Interrupt Line B from slot 4
157 *12 Interrupt Line A from slot 5
158 *13 Interrupt Line B from slot 5
159 *14 Interrupt Line A from slot 6
160 *15 Interrupt Line B from slot 6
161 *
162 * Summary @ 0x544, summary register #2:
163 * Bit Meaning
164 * 0 OR of all unmasked ints in SR #2
165 * 1 OR of secondary bus ints
166 * 2 Interrupt Line C from slot 0
167 * 3 Interrupt Line D from slot 0
168 * 4 Interrupt Line C from slot 1
169 * 5 Interrupt line D from slot 1
170 * 6 Interrupt Line C from slot 2
171 * 7 Interrupt Line D from slot 2
172 * 8 Interrupt Line C from slot 3
173 * 9 Interrupt Line D from slot 3
174 *10 Interrupt Line C from slot 4
175 *11 Interrupt Line D from slot 4
176 *12 Interrupt Line C from slot 5
177 *13 Interrupt Line D from slot 5
178 *14 Interrupt Line C from slot 6
179 *15 Interrupt Line D from slot 6
180 *
181 * The device to slot mapping looks like:
182 *
183 * Slot Device
184 * 7 Intel PCI-EISA bridge chip
185 * 8 DEC PCI-PCI bridge chip
186 * 11 PCI on board slot 0
187 * 12 PCI on board slot 1
188 * 13 PCI on board slot 2
189 *
190 *
191 * This two layered interrupt approach means that we allocate IRQ 16 and
192 * above for PCI interrupts. The IRQ relates to which bit the interrupt
193 * comes in on. This makes interrupt processing much easier.
194 */
195
196 static int __init
noritake_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)197 noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
198 {
199 static char irq_tab[15][5] __initdata = {
200 /*INT INTA INTB INTC INTD */
201 /* note: IDSELs 16, 17, and 25 are CORELLE only */
202 { 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */
203 { -1, -1, -1, -1, -1}, /* IdSel 17, S3 Trio64 */
204 { -1, -1, -1, -1, -1}, /* IdSel 18, PCEB */
205 { -1, -1, -1, -1, -1}, /* IdSel 19, PPB */
206 { -1, -1, -1, -1, -1}, /* IdSel 20, ???? */
207 { -1, -1, -1, -1, -1}, /* IdSel 21, ???? */
208 { 16+2, 16+2, 16+3, 32+2, 32+3}, /* IdSel 22, slot 0 */
209 { 16+4, 16+4, 16+5, 32+4, 32+5}, /* IdSel 23, slot 1 */
210 { 16+6, 16+6, 16+7, 32+6, 32+7}, /* IdSel 24, slot 2 */
211 { 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 25, slot 3 */
212 /* The following 5 are actually on PCI bus 1, which is
213 across the built-in bridge of the NORITAKE only. */
214 { 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */
215 { 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 17, slot 3 */
216 {16+10, 16+10, 16+11, 32+10, 32+11}, /* IdSel 18, slot 4 */
217 {16+12, 16+12, 16+13, 32+12, 32+13}, /* IdSel 19, slot 5 */
218 {16+14, 16+14, 16+15, 32+14, 32+15}, /* IdSel 20, slot 6 */
219 };
220 const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5;
221 return COMMON_TABLE_LOOKUP;
222 }
223
224 static u8 __init
noritake_swizzle(struct pci_dev * dev,u8 * pinp)225 noritake_swizzle(struct pci_dev *dev, u8 *pinp)
226 {
227 int slot, pin = *pinp;
228
229 if (dev->bus->number == 0) {
230 slot = PCI_SLOT(dev->devfn);
231 }
232 /* Check for the built-in bridge */
233 else if (PCI_SLOT(dev->bus->self->devfn) == 8) {
234 slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */
235 }
236 else
237 {
238 /* Must be a card-based bridge. */
239 do {
240 if (PCI_SLOT(dev->bus->self->devfn) == 8) {
241 slot = PCI_SLOT(dev->devfn) + 15;
242 break;
243 }
244 pin = pci_swizzle_interrupt_pin(dev, pin);
245
246 /* Move up the chain of bridges. */
247 dev = dev->bus->self;
248 /* Slot of the next bridge. */
249 slot = PCI_SLOT(dev->devfn);
250 } while (dev->bus->self);
251 }
252 *pinp = pin;
253 return slot;
254 }
255
256 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
257 static void
noritake_apecs_machine_check(unsigned long vector,unsigned long la_ptr)258 noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
259 {
260 #define MCHK_NO_DEVSEL 0x205U
261 #define MCHK_NO_TABT 0x204U
262
263 struct el_common *mchk_header;
264 unsigned int code;
265
266 mchk_header = (struct el_common *)la_ptr;
267
268 /* Clear the error before any reporting. */
269 mb();
270 mb(); /* magic */
271 draina();
272 apecs_pci_clr_err();
273 wrmces(0x7);
274 mb();
275
276 code = mchk_header->code;
277 process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
278 (mcheck_expected(0)
279 && (code == MCHK_NO_DEVSEL
280 || code == MCHK_NO_TABT)));
281 }
282 #endif
283
284
285 /*
286 * The System Vectors
287 */
288
289 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
290 struct alpha_machine_vector noritake_mv __initmv = {
291 .vector_name = "Noritake",
292 DO_EV4_MMU,
293 DO_DEFAULT_RTC,
294 DO_APECS_IO,
295 .machine_check = noritake_apecs_machine_check,
296 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
297 .min_io_address = EISA_DEFAULT_IO_BASE,
298 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
299
300 .nr_irqs = 48,
301 .device_interrupt = noritake_device_interrupt,
302
303 .init_arch = apecs_init_arch,
304 .init_irq = noritake_init_irq,
305 .init_rtc = common_init_rtc,
306 .init_pci = common_init_pci,
307 .pci_map_irq = noritake_map_irq,
308 .pci_swizzle = noritake_swizzle,
309 };
310 ALIAS_MV(noritake)
311 #endif
312
313 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
314 struct alpha_machine_vector noritake_primo_mv __initmv = {
315 .vector_name = "Noritake-Primo",
316 DO_EV5_MMU,
317 DO_DEFAULT_RTC,
318 DO_CIA_IO,
319 .machine_check = cia_machine_check,
320 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
321 .min_io_address = EISA_DEFAULT_IO_BASE,
322 .min_mem_address = CIA_DEFAULT_MEM_BASE,
323
324 .nr_irqs = 48,
325 .device_interrupt = noritake_device_interrupt,
326
327 .init_arch = cia_init_arch,
328 .init_irq = noritake_init_irq,
329 .init_rtc = common_init_rtc,
330 .init_pci = cia_init_pci,
331 .kill_arch = cia_kill_arch,
332 .pci_map_irq = noritake_map_irq,
333 .pci_swizzle = noritake_swizzle,
334 };
335 ALIAS_MV(noritake_primo)
336 #endif
337